Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Level Set”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

A Low Cost Simulation System to Demonstrate Pilot Induced Oscillation Phenomenon

A flight simulation system with graphics and software on Silicon Graphics computer workstations has been installed in the Flight Vehicle Design Laboratory at Tuskegee University. The system has F-15E flight simulation software from NASA Dryden which uses the graphics of SGI flight simulation demos. On the system, thus installed, a study of pilot induced oscillations is planned for future work. Preliminary research is conducted by obtaining two sets of straight level flights with pilot in the loop. In one set of flights no additional delay is used between the stick input and the appearance of airplane response on the computer monitor. In another set of flights, a 500 ms additional delay is used. The flight data is analyzed to find cross correlations between deflections of control surfaces and response of the airplane. The pilot dynamics features depicted from cross correlations of straight level flights are discussed in this report. The correlations presented here will serve as reference material for the corresponding correlations in a future study of pitch attitude tracking tasks involving pilot induced oscillations.

Ali, Syed Firasat↗

WetNet operations

WetNet is an interdisciplinary Earth science data analysis and research project with an emphasis on the study of the global hydrological cycle. The project goals are to facilitate scientific discussion, collaboration, and interaction among a selected group of investigators by providing data access and data analysis software on a personal computer. The WetNet system fulfills some of the functionality of a prototype Product Generation System (PGS), Data Archive and Distribution System (DADS), and Information Management System for the Distributed Active Archive Center. The PGS functionality is satisfied in WetNet by processing the Special Sensor Microwave/Imager (SSM/I) data into a standard format (McIDAS) data sets and generating geophysical parameter Level II browse data sets. The DADS functionality is fulfilled when the data sets are archived on magneto optical cartridges and distributed to the WetNet investigators. The WetNet data sets on the magneto optical cartridges contain the complete WetNet processing, catalogue, and menu software in addition to SSM/I orbit data for the respective two week time period.

Goodman, H. Michael↗

NASA Weather Support 2017

In the mid to late 1980's, as NASA was studying ways to improve weather forecasting capabilities to reduce excessive weather launch delays and to reduce excessive weather Launch Commit Criteria (LCC) waivers, the Challenger Accident occurred and the AC-67 Mishap occurred.[1] NASA and USAF weather personnel had advance knowledge of extremely high levels of weather hazards that ultimately caused or contributed to both of these accidents. In both cases, key knowledge of the risks posed by violations of weather LCC was not in the possession of final decision makers on the launch teams. In addition to convening the mishap boards for these two lost missions, NASA convened expert meteorological boards focusing on weather support. These meteorological boards recommended the development of a dedicated organization with the highest levels of weather expertise and influence to support all of American spaceflight. NASA immediately established the Weather Support Office (WSO) in the Office of Space Flight (OSF), and in coordination with the United Stated Air Force (USAF), initiated an overhaul of the organization and an improvement in technology used for weather support as recommended. Soon after, the USAF established a senior civilian Launch Weather Officer (LWO) position to provide meteorological support and continuity of weather expertise and knowledge over time. The Applied Meteorology Unit (AMU) was established by NASA, USAF, and the National Weather Service to support initiatives to place new tools and methods into an operational status. At the end of the Shuttle Program, after several weather office reorganizations, the WSO function had been assigned to a weather branch at Kennedy Space Center (KSC). This branch was dismantled in steps due to further reorganization, loss of key personnel, and loss of budget line authority. NASA is facing the loss of sufficient expertise and leadership required to provide current levels of weather support. The recommendation proposed herein is to re-establish the WSO under a high level office, with funding set at about the same levels as today, with a revitalized charter and focus to allow for the WSO to operate as originally intended.

lessons learned↗

Experimental Evaluation of Installed Cooking Exhaust Fan Performance

The installed performance of cooking exhaust fans was evaluated through residential field experiments conducted on a sample of 15 devices varying in design and other characteristics. The sample included two rear downdraft systems, two under-cabinet microwave over range (MOR) units, three different installations of an under-cabinet model with grease screens across the bottom and no capture hood, two devices with grease screens covering the bottom of a large capture hood (one under-cabinet, one wall-mount chimney), four under-cabinet open hoods, and two open hoods with chimney mounts over islands. Performance assessment included measurement of airflow and sound levels across fan settings and experiments to quantify the contemporaneous capture efficiency for the exhaust generated by natural gas cooking burners.Capture efficiency is defined as the fraction of generated pollutants that are removed through the exhaust and thus not available for inhalation of household occupants. Capture efficiency (CE) was assessed for various configurations of burner use (e.g., single front, single back, combination of one front and one back, oven) and fan speed setting. Measured airflow rates were substantially lower than the levels noted in product literature for many of the units. This shortfall was observed for several units costing in excess of $1000. Capture efficiency varied widely (from<5percent to roughly 100percent) across devices and across conditions for some devices. As expected, higher capture efficiencies were achieved with higher fan settings and the associated higher air flow rates. In most cases, capture efficiencies were substantially higher for rear burners than for front burners. The best and most consistent performance was observed for open hoods that covered all cooktop burners and operated at higher airflow rates. The lowest capture efficiencies were measured when a front burner was used with a rear backdraft system or with lowest fan setting for above the range systems that do not cover the front burners.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

SET overexpression in HEK293 cells regulates mitochondrial uncoupling proteins levels within a mitochondrial fission/reduced autophagic flux scenario

We hypothesized that SET, a protein accumulated in some cancer types and Alzheimer disease, is involved in cell death through mitochondrial mechanisms. We addressed the mRNA and protein levels of the mitochondrial uncoupling proteins UCP1, UCP2 and UCP3 (S and L isoforms) by quantitative real-time PCR and immunofluorescence as well as other mitochondrial involvements, in HEK293 cells overexpressing the SET protein (HEK293/SET), either in the presence or absence of oxidative stress induced by the pro-oxidant t-butyl hydroperoxide (t-BHP). SET overexpression in HEK293 cells decreased UCP1 and increased UCP2 and UCP3 (S/L) mRNA and protein levels, whilst also preventing lipid peroxidation and decreasing the content of cellular ATP. SET overexpression also (i) decreased the area of mitochondria and increased the number of organelles and lysosomes, (ii) increased mitochondrial fission, as demonstrated by increased FIS1 mRNA and FIS-1 protein levels, an apparent accumulation of DRP-1 protein, and an increase in the VDAC protein level, and (iii) reduced autophagic flux, as demonstrated by a decrease in LC3B lipidation (LC3B-II) in the presence of chloroquine. Therefore, SET overexpression in HEK293 cells promotes mitochondrial fission and reduces autophagic flux in apparent association with up-regulation of UCP2 and UCP3; this implies a potential involvement in cellular processes that are deregulated such as in Alzheimer's disease and cancer. - Highlights: • SET, UCPs and autophagy prevention are correlated. • SET action has mitochondrial involvement. • UCP2/3 may reduce ROS and prevent autophagy. • SET protects cell from ROS via UCP2/3.

60 APPLIED LIFE SCIENCES↗

A Search for the Standard Model Higgs Boson Produced in Association with a $W$ Boson

We present a search for a standard model Higgs boson produced in association with a W boson using data collected with the CDF II detector from p$\bar{p}$ collisions at √s = 1.96 TeV. The search is performed in the WH → ℓvb$\bar{b}$ channel. The two quarks usually fragment into two jets, but sometimes a third jet can be produced via gluon radiation, so we have increased the standard two-jet sample by including events that contain three jets. We reconstruct the Higgs boson using two or three jets depending on the kinematics of the event. We find an improvement in our search sensitivity using the larger sample together with this multijet reconstruction technique. Our data show no evidence of a Higgs boson, so we set 95% confidence level upper limits on the WH production rate. We set limits between 3.36 and 28.7 times the standard model prediction for Higgs boson masses ranging from 100 to 150 GeV/c 2 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The 2S(+) - 2P separation in KO

The 2S(+) - 2P separation in KO is investigated using large basis sets and high levels of correlation treatment. Relativistic effects are included at the Dirac-Fock level and reduce the separation only slightly. The basis set superposition error is considered in detail. On the basis of these calculations, our best estimate places the 2p sub 3/2 state about 200 cm(exp -1) above the ground 2 sigma(+) state in agreement with our previous estimate.

Bauschlicher, Charles W., Jr.↗

The 2Sigma(+)-2Pi separation in KO

The 2Sigma(+)-2Pi separation in KO is investigated using large basis sets and high levels of correlation treatment. Relativistic effects are included at the Dirac-Fock level and reduce the separation only slightly. The basis set superposition error is considered in detail. On the basis of these calculations, our best estimate places the 2Pi3/2 state about 200/cm above the ground 2Sigma(+) state, in agreement with our previous estimate.

Bauschlicher, Charles W., Jr.↗

Search for f{sub J}(2220) in Radiative J/{psi} Decays

We present a search for f{sub J}(2220) production in radiative J/{psi}{yields}{gamma}f{sub J}(2220) decays using 460 fb{sup -1} of data collected with the BABAR detector at the SLAC PEP-II e{sup +}e{sup -} collider. The f{sub J}(2220) is searched for in the decays to K{sup +}K{sup -} and K{sub S}{sup 0}K{sub S}{sup 0}. No evidence of this resonance is observed, and 90% confidence level upper limits on the product of the branching fractions for J/{psi}{yields}{gamma}f{sub J}(2220) and f{sub J}(2220){yields}K{sup +}K{sup -}(K{sub S}{sup 0}K{sub S}{sup 0}) as a function of spin and helicity are set at the level of 10{sup -5}, below the central values reported by the Mark III experiment.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SeaWiFS technical report series. Volume 32: Level-3 SeaWiFS data products. Spatial and temporal binning algorithms

The level-3 data products from the Sea-viewing Wide Field-of-view Sensor (SeaWiFS) are statistical data sets derived from level-2 data. Each data set will be based on a fixed global grid of equal-area bins that are approximately 9 x 9 sq km. Statistics available for each bin include the sum and sum of squares of the natural logarithm of derived level-2 geophysical variables where sums are accumulated over a binning period. Operationally, products with binning periods of 1 day, 8 days, 1 month, and 1 year will be produced and archived. From these accumulated values and for each bin, estimates of the mean, standard deviation, median, and mode may be derived for each geophysical variable. This report contains two major parts: the first (Section 2) is intended as a users' guide for level-3 SeaWiFS data products. It contains an overview of level-0 to level-3 data processing, a discussion of important statistical considerations when using level-3 data, and details of how to use the level-3 data. The second part (Section 3) presents a comparative statistical study of several binning algorithms based on CZCS and moored fluorometer data. The operational binning algorithms were selected based on the results of this study.

Hooker, Stanford B.↗

A search for decays of the Higgs boson to invisible particles in events with a top-antitop quark pair or a vector boson in proton-proton collisions at $$\sqrt{s} = 13\,\text {Te}\hspace{-.08em}\text {V} $$

A search for decays to invisible particles of Higgs bosons produced in association with a top-antitop quark pair or a vector boson, which both decay to a fully hadronic final state, has been performed using proton-proton collision data collected at $\sqrt{s} = 13$ TeV by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138fb -1 . The 95% confidence level upper limit set on the branching fraction of the 125 GeV Higgs boson to invisible particles, B(H → inv), is 0.54 (0.39 expected), assuming standard model production cross sections. The results of this analysis are combined with previous B(H → inv) searches carried out at $\sqrt{s} = 7$, 8, and 13 TeV in complementary production modes. The combined upper limit at 95% confidence level on B(H → inv) is 0.15 (0.08 expected).

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Calculating the X-Ray Fluorescence from the Planet Mercury Due to High-Energy Electrons

The least-studied terrestrial planet is Mercury due to its proximity to the Sun, which makes telescopic observations and spacecraft encounters difficult. Our lack of knowledge about Mercury should change in the near future due to the recent launching of MESSENGER, a Mercury orbiter. Another mission (BepiColombo) is currently being planned. The x-ray spectrometer on MESSENGER (and planned for BepiColombo) can characterize the elemental composition of a planetary surface by measuring emitted fluorescent x-rays. If electrons are ejected from an atom s inner shell by interaction with energetic particles such as photons, electrons, or ions, electrons from an outer shell can transfer to the inner shell. Characteristic x-rays are then emitted with energies that are the difference between the binding energy of the ion in its excited state and that of the ion in its ground state. Because each element has a unique set of energy levels, each element emits x-rays at a unique set of energies. Electrons and ions usually do not have the needed flux at high energies to cause significant x-ray fluorescence on most planetary bodies. This is not the case for Mercury where high-energy particles were detected during the Mariner 10 flybys. Mercury has an intrinsic magnetic field that deflects the solar wind, resulting in a bow shock in the solar wind and a magnetospheric cavity. Electrons and ions accelerated in the magnetosphere tend to follow its magnetic field lines and can impact the surface on Mercury s dark side Modeling has been done to determine if x-ray fluorescence resulting from the impact of high-energy electrons accelerated in Mercury's magnetosphere can be detected by MESSENGER. Our goal is to understand how much bulk chemical information can be obtained from x-ray fluorescence measurements on the dark side of Mercury.

Burbine, T. H.↗

Search for pair production of the supersymmetric partner of the top quark in the t-tildet-tilde->bbe{sup +}-mu{sup +}-v-tildev-tilde decay channel at DOe

We report the result of a search for the pair production of the light top squark decaying to two bottom quarks, an electron, a muon, and two sneutrinos in 3.1+-0.19 fb{sup -1} of data from the DOe detector at the Tevatron, Fermilab's sq root(s) = 1.96 TeV pp-bar collider. No significant excess of events above the standard model prediction was detected and new exclusion limits at the 95% confidence level have been set for a portion of the stop mass-sneutrino mass plane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Computer-aided design of control systems to meet many requirements

A method is described for using nonlinear programing in the computer-aided design of airplane control systems. It is assumed that the quality of such systems depends on many criteria. These criteria are included in the constraints vector (instead of attempting to combine them into a single scalar criterion, as is usually done), and the design proceeds through a sequence of nonlinear programing solutions in which the designer varies the specification of sets of requirements levels. The method is applied to design of a lateral stability augmentation system (SAS) for a fighter airplane, in which the requirements vector is chosen from the official handling qualities specifications. Results are shown for several simple SAS configurations designed to obtain desirable handling qualities over all design flight conditions with minimum feedback gains. The choice of the final design for each case is not unique but depends on the designer's decision as to which achievable set of requirements levels represents the best for that system. Results indicate that it may be possible to design constant parameter SAS which can satisfy the most stringent handling qualities requirements for fighter airplanes in all flight conditions. The role of the designer as a decision maker, interacting with the computer program, is discussed. Advantages of this type of designer-computer interaction are emphasized. Desirable extensions of the method are indicated.

Schy, A. A.↗

Search for B decays to final states with the η c meson

We report a search for B decays to selected final states with the η c meson: B ± → K ± η c π + π - , B ± → K ± η c ω, B ± → K ± η c η and B ± → K ± η c π 0 . The analysis is based on 772 × 10 6 BB-bar pairs collected at the Υ(4S) resonance with the Belle detector at the KEKB asymmetric-energy e + e - collider. We set 90% confidence level upper limits on the branching fractions of the studied B decay modes, independent of intermediate resonances, in the range (0.6–5.3) × 10 -4 . We also search for molecular-state candidates in the D 0 D*-bar 0 - D-bar 0 D* 0 , D 0 D-bar 0 + D-bar 0 D 0 and D* 0 D*-bar 0 + D*-bar 0 D* 0 combinations, neutral partners of the Z(3900) ± and Z(4020) ± , and a poorly understood state X(3915) as possible intermediate states in the decay chain, and set 90% confidence level upper limits on the product of branching fractions to the mentioned intermediate states and decay branching fractions of these states in the range (0.6–6.9) × 10 -5 .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for high-mass new phenomena in the dilepton final state using proton–proton collisions at s = 13 TeV with the ATLAS detector

A search is conducted for both resonant and non-resonant high-mass new phenomena in dielectron and dimuon final states. The search uses 3.2 fb-1of proton–proton collision data, collected at √s = 13 TeV by the ATLAS experiment at the LHC in 2015. The dilepton invariant mass is used as the discriminating variable. No significant deviation from the Standard Model prediction is observed; therefore limits are set on the signal model parameters of interest at 95% credibility level. Upper limits are set on the cross-section times branching ratio for resonances decaying to dileptons, and the limits are converted into lower limits on the resonance mass, ranging between 2.74 TeV and 3.36 TeV, depending on the model. Lower limits on the ℓℓqq contact interaction scale are set between 16.7 TeV and 25.2 TeV, also depending on the model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improving the off-axis spatial resolution and dynamic range of the NIF X-ray streak cameras (invited)

We report simulations and experiments that demonstrate an increase in spatial resolution of the NIF core diagnostic x-ray streak cameras by at least a factor of two, especially off axis. A design was achieved by using a corrector electron optic to flatten the field curvature at the detector plane and corroborated by measurement. In addition, particle in cell simulations were performed to identify the regions in the streak camera that contribute the most to space charge blurring. These simulations provide a tool for convolving synthetic pre-shot spectra with the instrument function so signal levels can be set to maximize dynamic range for the relevant part of the streak record.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Search for a heavy neutral particle decaying into an electron and a muon using 1 fb -1 of ATLAS data

A search is presented for a high mass neutral particle that decays directly to the e < sup > ± < /sup > μ < sup > ∓ < /sup > final state. The data sample was recorded by the ATLAS detector in √ s = 7 TeV pp collisions at the LHC from March to June 2011 and corresponds to an integrated luminosity of 1.07 fb < sup > -1 < /sup > . The data are found to be consistent with the Standard Model background. The high e < sup > ± < /sup > μ < sup > ∓ < /sup > mass region is used to set 95% confidence level upper limits on the production of two possible new physics processes: tau sneutrinos in an R-parity violating supersymmetric model and Z'-like vector bosons in a lepton flavor violating model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗