Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Large scale”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Large Scale Synthesis of Manganese Oxide/Reduced Graphene Oxide Composites as Anode Materials for Long Cycle Lithium Ion Batteries

Manganese oxides have been frequently used as cathodes in primary batteries. Applications of manganese oxides in secondary batteries are limited by low electrical conductivity and rapid capacity fading because of electrode pulverization and aggregation. In this study, a solid-state synthetic strategy is presented that successfully combines nanosize (~ 50 nm) nickel doped α-MnO 2 with reduced graphene oxides as highly stable composite anodes in lithium ion batteries. The synthesis approach is easy to scale up and suitable for industrial applications. Here, the rationally designed Ni-α-MnO 2 /RGO was tested in galvanostatic half coin cells for Li + charge-discharge studies. The results show that this composite maintains a high capacity of 615 mAh g -1 even after 200 cycles at a high current rate of 1 C (830 mA g -1 ), and with a high Coulombic efficiency near 99%. The anodes exhibit excellent rate capability in a wide range of rate testing from 0.2 to 10 C, without showing capacity decay. This superior anode performance is ascribed to the reduced size of α-MnO 2 domains that are well dispersed in an RGO matrix, which affords good ionic/elec. cond., low charge transfer resistance and mitigates issues of vol. expansion of the anodic active materials. This study opens up an avenue for developing the manufacturing of high-performance electrodes for real applications, such as batteries in electrical vehicles.

25 ENERGY STORAGE↗
DOE OSTI2025

One-Step Transfer of Symmetric and Asymmetric Contacts for Large-Scale 2D Electronics and Optoelectronics

Two-dimensional (2D) semiconductors are highly promising candidates for thin-film transistor applications due to their scalability, transferability, atomic thickness, and relatively high carrier mobility. However, a substantial performance gap remains between individual devices based on single-crystalline 2D films and wafer-scale integrated circuits, primarily due to defects introduced during conventional fabrication processes. Here, we report a diamond-assisted electrode transfer technique for the van der Waals integration of wafer-scale prefabricated electrode arrays onto 2D materials, enabling scalable electronics and optoelectronics. Implemented on metal–organic chemical vapor deposition-grown monolayer molybdenum disulfide, this method forms ultraclean metal–semiconductor interfaces, yielding field-effect transistors with excellent ohmic contacts, a low contact resistance of 400 Ω·μm, and a Schottky barrier height of only 9 meV. Furthermore, we demonstrate a scalable transistor array on monolayer molybdenum disulfide with excellent device performance uniformity, achieving an average field-effect mobility of 30 cm 2 V –1 s –1 and an on/off current ratio exceeding 105. Additionally, high photocurrent and responsivity were demonstrated in the array devices, showing their potential for excellent image detection. We further demonstrate the versatility of this technique by fabricating a Schottky diode array through a single-step transfer of asymmetric electrodes─low work function aluminum and high work function gold─onto monolayer tungsten diselenide. This approach provides a clean, effective solution for contact engineering in 2D materials, offering a viable pathway toward wafer-scale, high-performance 2D electronics, optoelectronics, and integrated circuits.

2D electronics↗
DOE OSTI2025

Large-Scale Compatibilization of Postconsumer Polyolefins in the Presence of Paraffin Wax as a Rheology Modifier

Postconsumer polyolefins (r-POs) are leading plastic waste contributors today. This study reports, for the first time, the compatibilization of r-POs at a 50 kilogram (kg) scale with a styrene block copolymer compatibilizer in the presence of paraffin waxes as rheology modifiers (RMs). The addition of the rheological modifier (RM) and compatibilizer enhances the melt flow indices (MFIs) and mechanical properties, respectively. One aspect of this study is to compare the effectiveness of low-cost paraffin wax to that of specialized and expensive RMs in r-POs. The mechanical and rheological properties such as the melt flow index (MFI) of r-POs were compared in the presence of two types of RMs. Next, the study explores the challenges encountered when scaling the compatibilization of r-POs in the presence of paraffin wax from a 10-g to a 50-kg scale. The mechanical properties were determined and compared for samples at different scales. The study further investigated the effect of the method used for blending paraffin wax with r-PO and its impact on the value of their MFI and mechanical properties. This at-scale validation could pave the way for the commercialization of r-POs.

crystallinity↗
DOE OSTI2026

Fe(porphyrin)-Catalyzed Alkene Epoxidation with NaOCl: A Practical Small- and Large-Scale Alternative to m CPBA

Epoxides are important intermediates in synthetic chemistry. Stoichiometric peroxyacids, such as meta -chloroperoxybenzoic acid ( m CPBA), are widely used to convert alkenes to epoxides but show poor compatibility with aromatic heterocycles and present hazards when scaled. Herein, we report a highly practical alkene epoxidation method that uses the commercially available iron porphyrin, Fe(TPFPP)Cl (TPFPP = tetrakis(pentafluorophenyl)porphyrin), as a catalyst (0.05 mol %) and aqueous NaOCl as the oxidant in acetonitrile as the solvent. No additional ligands or additives are needed, and the reactions proceed under ambient conditions. The method shows a broad scope, affording high yields of epoxides in reactions with terminal and internal aromatic and aliphatic alkenes, heterocycle-containing substrates, glycals, and polyenes. The practicality of the method is demonstrated in the 100 g scale epoxidation of tri- O -acetyl- D -glucal, which proceeds to completion in 15 min at room temperature.

catalysts↗
DOE OSTI2022

From Theory to Large-Scale Simulations, or Living Without “The Paradox of Choice”

Navigating the challenges we face at work and in life is often difficult, and can even make us question our past decisions. This dilemma is even worse nowadays because of the many options available to us, leaving us not enough time to explore them all: the paradox of choice. My life experience offers another perspective on how to make choices; wherein I had to rely more on serendipity, coincidence, and embracing risks. This paper presents a brief description of my career path in space science—from a small village in the countryside to one of the top science Laboratories in the world—and lessons learned through the process of becoming a more resilient scientist. I came to the United States from Bulgaria about 30 years ago, seeking a better education and job opportunities. Navigating a career of research scientist, not only did I find jobs that motivated me every day, I also met amazing people to work with along the way. As a woman in science, I hope my story can inspire and attract young researchers (girls and boys alike) to our community, helping to grow and diversify the next generation of space scientists.

99 GENERAL AND MISCELLANEOUS↗