Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LASER RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Laser ablation of sub-10 nm silver nanoparticles

Laser ablation of silver nanoparticles (NPs) was studied with laser post-ionization (LPI) time-of-flight mass spectrometry (TOF MS). Silver NPs containing ~15 000 Ag atoms (4 nm radius) were deposited by soft landing (energy 3 eV/atom) onto indium tin oxide (ITO)/glass substrates. Laser ablation was performed using frequency-doubled Ti:sapphire nanosecond pulsed laser irradiation at three different wavelengths (371, 401, and 421 nm), whereas for post-ionization, pulses from an F 2 laser were used. Laser fluences and time delay dependencies of Ag and In signals were obtained. Using these data, the temperature of the desorption source as well as its time duration were calculated. It was found that the peak temperature of NPs was above their melting point and they cooled down slowly, with temperature decay time of several hundreds of nanoseconds. This anomalous behavior was explained based on a model where the semiconducting ITO substrate is initially transparent to the desorption laser radiation but starts to adsorb it due to the temperature increase arising from heat exchange with NPs. Poor heat conduction in the ITO film creates conditions for long-lived hot spots on the surface and initiates further optical damage of the substrate. No difference in the ablation process due to plasmon resonance was detected, likely due to thermal expansion and melting of NPs during laser irradiation, which then broadens the plasmon absorption band enough to cover all wavelengths used. Here, these results clearly demonstrate that the process of NP interaction with laser radiation is governed not only by initial optical and thermophysical parameters of NPs and the surrounding media, but also by their alteration due to temperature increases during the irradiation process.

36 MATERIALS SCIENCE↗

Comparative analysis of characteristics of a supersonic cw chemical HF laser on molecular fluorine and nitrogen trifluoride

We have experimentally studied the characteristics of a supersonic cw chemical HF laser with a flat nozzle array based on a nozzle – nozzle reagent mixing scheme operating with the use of F{sub 2} – D{sub 2} – He and NF{sub 3} – D{sub 2} – He fuel compositions in an atomic fluorine generator. The active medium flow field pattern, its gas-dynamic characteristics, and the laser radiation spectrum are considered. The comparison of these characteristics has made it possible to establish a strong impact on the flow field (lasing zone length) of the chemical composition of the combustion products from the atomic fluorine generator. The gas-dynamic parameters of the active medium formed by using a NF{sub 3} – D{sub 2} – He fuel have turned out to be less acceptable in terms of the gas flow pressure recovery than in the case of F{sub 2} – D{sub 2} – He fuel, while the radiation spectrum was more preferable from the viewpoint of passing through the atmosphere. (paper)

36 MATERIALS SCIENCE↗

Nonlinear relativistic single-electron Thomson scattering power spectrum for incoming laser of arbitrary intensity

The classical nonlinear incoherent Thomson scattering power spectrum from a single relativistic electron with incoming laser radiation of any intensity, investigated numerically by the present authors in a previous publication, displayed both an approximate quadratic behavior in frequency and a redshift of the power spectrum for high intensity incoming radiation. The present work is devoted to justify, in a more general setup, those numerical findings. Those justifications are reinforced by extending suitably analytical approaches, as developed by other authors. Moreover, our analytical treatment exhibits differences between the Doppler-like frequencies for linear and circular polarization of the incoming radiation. Those differences depend nonlinearly on the laser intensity and on the electron initial velocity and do not appear to have been displayed by previous authors. Those Doppler-like frequencies and their differences are validated by new Monte Carlo computations beyond our previuos ones and reported here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear magneto-optical resonances at D{sub 1} excitation of {sup 85}Rb and {sup 87}Rb in an extremely thin cell

Nonlinear magneto-optical resonances have been measured in an extremely thin cell (ETC) for the D{sub 1} transition of rubidium in an atomic vapor of natural isotopic composition. All hyperfine transitions of both isotopes have been studied for a wide range of laser power densities, laser detunings, and ETC wall separations. Dark resonances in the laser induced fluorescence (LIF) were observed as expected when the ground-state total angular momentum F{sub g} was greater than or equal to the excited-state total angular momentum F{sub e}. Unlike the case of ordinary cells, the width and contrast of dark resonances formed in the ETC dramatically depended on the detuning of the laser from the exact atomic transition. A theoretical model based on the optical Bloch equations was applied to calculate the shapes of the resonance curves. The model, which had been developed previously for ordinary vapor cells, averaged over the contributions from different atomic velocity groups, considered all neighboring hyperfine transitions, took into account the splitting and mixing of magnetic sublevels in an external magnetic field, and included a detailed treatment of the coherence properties of the laser radiation. Such a theoretical approach had successfully described nonlinear magneto-optical resonances in ordinary vapor cells. However, to describe the resonances in the ETC, key parameters such as the ground-state relaxation rate, excited-state relaxation rate, Doppler width, and Rabi frequency had to be modified significantly in accordance with the ETC's unique features. The level of agreement between the measured and calculated resonance curves achieved for the ETC was similar to what could be accomplished for ordinary cells. However, in the case of the ETC, it was necessary to fine-tune parameters such as the background and the Rabi frequency for different transitions, whereas for the ordinary cells, these parameters were identical for all transitions.

74 ATOMIC AND MOLECULAR PHYSICS↗

Remote laser speckle interferometry: A speckle pattern formation model

A mathematical model of laser radiation scattering from a remote rough surface illuminated by a focused laser beam is proposed. The model can be used to estimate the mean number and size of speckles and their mean and maximum intensity. Fluctuations of the speckle intensity were observed upon focusing radiation in the object plane. The magnitude of fluctuations achieves 50%-70% and depends on the object roughness and the laser beam parameters. (laser radiation scattering)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of cubic nonlinearity on compensation of thermally induced polarisation distortions in Faraday isolators

The problem on laser radiation propagation in a birefringent medium is solved with the allowance made for thermally induced linear birefringence under the conditions of cubic nonlinearity. It is shown that at high average and peak radiation powers the degree of isolation in a Faraday isolator noticeably reduces due to the cubic nonlinearity: by more than an order of magnitude when the B-integral is equal to unity. This effect is substantial for pulses with the energy of 0.2 – 3 J, duration of 10 ps to 4 ns and pulse repetition rate of 0.2 – 40 kHz. (components of laser devices)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Apertureless scanning microscope probe as a detector of semiconductor laser emission

An operating semiconductor laser has been studied using a scanning probe microscope. A shift of the resonance frequency of probe that is due to its heating by laser radiation has been analyzed. The observed shift is proportional to the absorbed radiation and can be used to measure the laser near field or its output power. A periodical dependence of the measured signal has been observed as a function of distance between the probe and the surface of the laser due to the interference of the outgoing and cantilever-reflected waves. Due to the multiple reflections resulting in the interference, the light absorption by the probe cantilever is greatly enhanced compared with a single pass case. Interaction of infrared emission of a diode laser with different probes has been studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Continuous-wave laser generation of slow THz surface plasmons in an array of single-walled carbon nanotubes

The mechanism of generation of surface plasmon polaritons in the THz and far-IR ranges by laser irradiation of arrays of single-walled carbon nanotubes is considered. It is shown that by varying the angle of incidence of the laser beam, one can change the frequency of generated surface plasmon polaritons. As consequence, the nanotube length can be matched to the laser wavelength for efficient conversion of cw laser radiation to the THz range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Formation of subfemtosecond laser pulses in aperiodically poled nonlinear-optical crystals

The method of synthesis of ultrashort laser pulses in nonlinear aperiodically poled crystals based on the simultaneous generation of several higher optical harmonics is considered. The interaction of four waves with multiple frequencies involving three mutually coupled nonlinear three-frequency processes is studied. It is shown that by introducing intense laser radiation into a crystal, pulses of duration of the order of a few hundreds of attoseconds can be produced at the crystal output. (ultrashort light pulses)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of an optical pulsed discharge on the structure of a supersonic air flow

We present the results of investigation of the parameters of an optical pulsed discharge (OPD) and their relation with gasdynamic parameters of a supersonic flow and with characteristics of laser radiation. For the first time the discrete objects are detected in the OPD by an optical method, namely, low-density caverns moving along with the flow. The propagation velocity of the thermal track arising in a supersonic flow under the action of the OPD is measured. It is found that at a pulse repetition rate of 90 – 120 kHz the caverns unite into a single plasma jet. (laser applications and other topics in quantum electronics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser photoionisation selectivity of {sup 177}Lu radionuclide for medical applications

We consider the selectivity obtained by laser photoionisation of the {sup 177}Lu radioisotope according to the three-stage scheme from the viewpoint of the task of isolating the radionuclide for medical use. The selectivity attained through various photoionisation channels and the impact of multiphoton processes and the laser radiation spectrum on the photoionisation selectivity are investigated. (paper)

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Size resonances in penetration of intense femtosecond laser pulses through ultra-thin foils

An analytic expression for the transmission coefficient as a function of the foil thickness d describing penetration of intense femtosecond laser pulses through ultra-thin foils with a thickness of the order of 30-100 nm is derived using the Vlasov-Boltzmann equation. It is found that the transmission of laser radiation stops at the skin depth c/{omega}{sub p}, but sharp and narrow resonances occur for the foil thickness d > c/{omega}{sub p} with the transmission coefficient T = 1.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Modification of the plasma-prepared As–Se–Te films and creation on their base the planar waveguides by continuous laser writing

As a result of the previous experiments (Mochalov et al. in Opt Quant Electron 49(8):274:1–274:11, 2017), it was found that the Te-based chalcogenide films prepared by plasma deposition have a transparency window in the range from 1.2 to 20 μm and cannot be modified in the two-photon absorption mode, and in the linear absorption mode only the thermal effects were observed leading to crystallization of the films or their destruction. In this work, PECVD-prepared As–Se–Te films were modified by continuous laser irradiation of different wavelengths—473, 632.8 and 808 nm. For the modification, samples with compositions As{sub 40}Se{sub 50}Te{sub 10} and As{sub 40}Se{sub 44}Te{sub 16} were deposited on a substrate of epi-polished crystalline sapphire. This paper presents the results of studying of the effect of continuous laser radiation on the optical and structural properties of the chalcogenide films samples. Also, planar waveguided structures based on the As–Se–Te films were formed and investigated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermometry of an open spatially inhomogeneous flame by diode laser absorption spectroscopy

Features of a single-beam variant of diode laser absorption spectroscopy (DLAS) used for temperature measurements in a spatially inhomogeneous hot zone are studied. A flame temperature of a commercial burner is measured by using water molecule absorption lines. The flame is probed by a diode laser radiation at various heights and in various directions. The correctness of DLAS measurement results is verified by comparing DLAS data with temperatures measured by the method of coherent anti-Stokes scattering (CARS). It is shown that in homogeneous flame domains the temperatures obtained by both the methods coincide. Temperature inhomogeneity along the probe beam direction is a principal problem of DLAS, in which case the method yields information about some effective temperature along the light trace. The difference in data obtained by DLAS and CARS is estimated. In probing traces with temperature gradients the difference reaches 700 K. Possibilities of accounting for temperature inhomogeneities along the trace in DLAS measurements are discussed. A method of differential spectra is suggested, which in certain conditions can provide substantially better coincidence of results for the two methods. (laser spectroscopy)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Laser spectroscopy of sub-micrometre- and micrometre-thick caesium-vapour layers

We present high resolution laser spectroscopy of Cs vapours confined in a unique optical cell of sub-micrometric and micrometric thickness, where a strong spatial anisotropy is present for the time of interaction between the atoms and laser radiation. Similarly to the spectra of selective specular reflection, the Doppler-free spectra of absorption and fluorescence are observed, not revealing cross-over resonances that will be useful for frequency stabilisation, provided the cell is cheap and compact. A new resonance in the fluorescence of closed transition is studied, demonstrating its high sensitivity to elastic atom – atom and atom – dielectric surface collisions. The theoretical modelling performed is in agreement with the experimental observations. (laser spectroscopy)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable nanowire nonlinear optical probe

One crucial challenge for subwavelength optics has been thedevelopment of a tunable source of coherent laser radiation for use inthe physical, information, and biological sciences that is stable at roomtemperature and physiological conditions. Current advanced near-fieldimaging techniques using fiber-optic scattering probes1,2 have alreadyachieved spatial resolution down to the 20-nm range. Recently reportedfar-field approaches for optical microscopy, including stimulatedemission depletion (STED)3, structured illumination4, and photoactivatedlocalization microscopy (PALM)5, have also enabled impressive,theoretically-unlimited spatial resolution of fluorescent biomolecularcomplexes. Previous work with laser tweezers6-8 has suggested the promiseof using optical traps to create novel spatial probes and sensors.Inorganic nanowires have diameters substantially below the wavelength ofvisible light and have unique electronic and optical properties9,10 thatmake them prime candidates for subwavelength laser and imagingtechnology. Here we report the development of an electrode-free,continuously-tunable coherent visible light source compatible withphysiological environments, from individual potassium niobate (KNbO3)nanowires. These wires exhibit efficient second harmonic generation(SHG), and act as frequency converters, allowing the local synthesis of awide range of colors via sum and difference frequency generation (SFG,DFG). We use this tunable nanometric light source to implement a novelform of subwavelength microscopy, in which an infrared (IR) laser is usedto optically trap and scan a nanowire over a sample, suggesting a widerange of potential applications in physics, chemistry, materials science,and biology.

36 MATERIALS SCIENCE↗

Scaling of energy characteristics of polycrystalline Fe{sup 2+}:ZnSe laser at room temperature

The lasing characteristics of lasers based on diffusiondoped Fe{sup 2+}:ZnSe polycrystalline samples excited at room temperature by an electric-discharge HF laser are studied. A sample doped from two sides (working surfaces) emitted laser radiation with the energy E='253' mJ with the slope efficiency η{sub d} = 33% and the efficiency with respect to the absorbed energy η{sub abs} ≈ 28% in the case of an elliptical pump spot of size a × b = 6.8 × 7.5 mm. It is found that the possibility of increasing the lasing energy of the samples of these types by increasing the pump spot area (at a constant pump energy density) is limited by the appearance of parasitic generation typical for disk lasers. The first results are reported on the laser based on a polycrystalline sample made by a technology that allows one to form a zero dopant concentration on the surface and a maximum concentration inside the sample (i.e., to create a sample with internal doping). The possibilities of increasing the Fe{sup 2+}:ZnSe laser energy at room temperature by using multilayer samples fabricated by this doping method are discussed. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗