Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “K”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Instantaneous mesh load factor ( K γ ) measurements in a wind turbine gearbox using fiber-optic strain sensors

The mesh load factor, K γ , describes how loads are shared between planet gears and has become one of the key design challenges in modern wind turbine gearboxes. Planet load sharing directly impacts tooth root stresses, a critical driver of torque density and gearbox reliability. Experimental evaluation of K γ is typically performed from sun gear tooth root strain gauge measurements, which are complex. Furthermore, such measurements can only provide an average value of load sharing. The present study describes an alternative method to evaluate the mesh load factor in wind turbine gearboxes based on fiber-optic strain sensors installed on the outer surface of the fixed ring gear. We present the results of an extensive measurement campaign to evaluate this novel sensing solution installed on the input planetary stage of a 2-MW wind turbine gearbox at the National Renewable Energy Laboratory's Flatirons Campus (Colorado, USA). The number of strain sensors on the ring gear was selected as an integer multiple of the number of planets, which has enabled an instantaneous evaluation of the mesh load factor. The effect of operating conditions on the planet load-sharing behavior of the gearbox has been investigated. The mesh load factor measured for operating conditions close to rated was below 1.05, well below IEC 61400-4 standard requirements.

17 WIND ENERGY↗
DOE OSTI2025

Spectroscopic diagnostics of high-temperature plasma in stellar coronae using Fe XXIV-XXIV K-shell lines with XRISM

The RS CVn type binary star GT Muscae was observed during its quiescence using the Resolve X-ray microcalorimeter spectrometer onboard XRISM. The main and satellite lines of the Fe XXIV-XXIV K-shell transitions were resolved for the first time from stellar sources. We conducted line ratio analysis to investigate any deviations from collisional ionization equilibrium and Maxwell electron energy distribution with a single temperature. By using five combinations of direct excitation lines and dielectronic recombination satellite lines in three line complexes (Fe He$\alpha$, Ly$\alpha$, and He$\beta$), we found that the plasma is well characterized by two-temperature thermal plasmas with temperatures of 1.7 and 4.3 keV, which is consistent with thermal broadening of Fe xxv, and the broad-band fitting results in the 1.7–10 keV band. Other forms of deviation from a single-temperature plasma, such as different ionization and electron temperatures or the $\kappa$ distribution for the electron energy distributions, are not favored, which is reasonable for stellar coronae at quiescence. This study demonstrates the utility of the Fe K-shell line ratio diagnostics to probe plasma conditions using X-ray microcalorimeters.

X-rays: stars↗
DOE OSTI2026

Fabrication and test of a 6-tesla-class high-temperature superconducting dipole magnet at 4.2 K

Superconducting magnets enable energy-frontier accelerators by generating strong magnetic fields to steer and focus the particles. Although high-temperature superconductors such as REBa 2 Cu 3 O x (, RE = rare earth) hold a strong potential for generating a higher magnetic field than Nb-Ti and Nb 3 Sn , the associated magnet and conductor technology for accelerator applications is still in its infancy. The U.S. Magnet Development Program is developing magnet technology in collaboration with industry. Here we report an experiment of making a dipole magnet called C3 using commercial high-temperature superconducting wires. The magnet, following a canted cos θ design, generated a dipole field of 5.99 T at 4.2 K in its clear aperture of 65 mm at 6.795 kA when a resistive voltage of 105 μ V appeared across one of the coils in the magnet. The stored energy was 53 kJ at the peak field. The magnet showed no degradation in the current-carrying capability at 4.2 K after the thermal cycle. We report on the detailed design, fabrication, and performance of the C3 magnet that can be of interest to potential users of this emerging technology. We also discuss issues and research needs to inform future magnet development. The experiment represented another step to addressing if the high-temperature superconducting accelerator magnet technology can increase the discovery capability of future particle accelerators.

Abraimov, Dmytro [National High Magnetic Field Lab↗
DOE OSTI2020

22 K superconductivity in Ba Fe 2 As 2 exposed to F 2

Several previous reports on undoped AEFe 2 As 2 (AE = alkaline earth metal) point to drops in resistivity indicative of possible superconductivity and some degree of Meissner effect in the magnetic susceptibility. Also, based on both resistivity and magnetic susceptibility measurements, controlled exposure to water vapor has been shown to induce superconductivity in AEFe 2 As 2 . In our study, BaFe 2 As 2 single crystals grown using the self-flux method showed a full resistive drop around 22 K and magnetic shielding, when exposed to fluorine gas postgrowth. Our measurements indicate electron (donor) doping via atomic substitution of F for As is concurrent with the observed superconductivity, which sheds light on the likely effect of exposure to water vapor in previous work. Like doping experiments (such as substitution of Co for Fe, P for As, or K for Ba) in AEFe 2 As 2 to date, the present work is consistent with suppression of the spin density wave transition coincident with the appearance of T c . In addition to answering the puzzle of superconductivity in undoped or water vapor exposed AEF 2 As 2 , our results also represent a fast (20 min exposure to 5% F in He) and reliable method suitable for inducing superconductivity in thin films of AEFe 2 As 2 . As a result, some supportive work on BaFe 2 As 2 exposed to Cl 2 is also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Effect of controlled pointlike disorder induced by 2.5-MeV electron irradiation on the nematic resistivity anisotropy of hole-doped (Ba,K)Fe 2 As 2

In-plane anisotropy of electrical resistivity was studied in samples of the hole-doped Ba 1–x K x Fe 2 As 2 in the composition range 0.21 ≤ x ≤ 0.26 where anisotropy changes sign. Low-temperature (~20 K) irradiation with relativistic 2.5 MeV electrons was used to control the level of disorder and residual resistivity of the samples. Modification of the stress-detwinning technique enabled measurements of the same samples before and after irradiation, leading to the conclusion of anisotropic character of predominantly inelastic scattering processes. Our main finding is that the resistivity anisotropy is of the same sign irrespective of residual resistivity, and remains the same in the orthorhombic C 2 phase above the reentrant tetragonal transition. Unusual T-linear dependence of the anisotropy Δρ ≡ ρ a (T) – ρ b (T) is found in pristine samples with x = 0.213 and x = 0.219 , without similar signatures in either ρ a (T) or ρ b (T). In this paper, we show that this feature can be reproduced by a phenomenological model of R. M. Fernandes et al. We speculate that onset of fluctuations of nematic order on approaching the instability towards the reentrant tetragonal phase contributes to this unusual dependence.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Frustrated spin-1/2 dimer compound K 2 Co 2 ( Se O 3 ) 3 with easy-axis anisotropy

Magnetic susceptibility, magnetization, and specific-heat measurements under both in-plane and out-of-plane field on K 2 Co 2 (SeO 3 ) 3 single crystals are reported. The Co dimers in this compound, which are made from face-sharing effective spin-1/2 CoO 6 octahedra, sit on the corners of a geometrically frustrating triangular planar lattice. No long-range magnetic ordering is found down to 0.35 K, which, together with the large negative Curie-Weiss temperature obtained from fitting the temperature-dependent magnetic susceptibility, indicates that the system is magnetically frustrated. Analysis of the field and orientation dependence of the magnetic and thermodynamic properties suggests the presence of an easy-axis anisotropy. Furthermore, the magnetic fluctuations present due to geometric frustration are more resistant to an in-plane field than a perpendicular-to-plane field.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Multigap electron-phonon superconductivity in the quasi-one-dimensional pnictide K 2 Mo 3 As 3

In this work, we show, using density functional calculations, that quasi-one-dimensional K 2 Mo 3 As 3 , which is closely related to K 2 Cr 3 As 3 and has very similar superconducting properties, is not close to magnetism and has conventional s wave electron-phonon superconductivity. This superconductivity is of multigap character due to different coupling on different Fermi surface sheets. This is discussed in relation to the properties of this family of quasi-one-dimensional pnictide superconductors. The results show that this family of superconductors provides a unique opportunity for studying the interplay of spin fluctuations and electron-phonon superconductivity in transition metal pnictides, and offer a path for sorting out the different proposed superconducting scenarios in this fascinating family of pnictide superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Slope of the upper critical field at T c in two-band superconductors with nonmagnetic disorder: s + + superconductivity in Ba 1 − x K x Fe 2 As 2

A recent theory of the disorder-dependent slope of the upper critical field at the superconducting transition temperature T c , defined as S ≡ |dH c2 /dT| T→T c , is extended to multiband superconductors aimed at iron-based superconductors, considering two constant gaps of different magnitudes and, potentially, different signs. Here, we show that the slope S decreases with increasing nonmagnetic scattering rate P in the s ± pairing state and increases in the s ++ superconductor for a reasonable range of parameters. The experiment shows that in a typical iron-based superconductor, Ba 1–x K x Fe 2 As 2 (BaK122), the nonmagnetic disorder induced by electron irradiation leads to an increasing S(P) across the superconducting “dome,” at different x. This implies that Ba 1–x K x Fe 2 As 2 is likely an s ++ superconductor with two effective gaps of different magnitudes, at least at moderate doping levels, x< 0.6. This work reopens a decade-long discussion about the nature of the superconducting order parameter in iron pnictides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Electron– K -phonon interaction in twisted bilayer graphene

We develop an analytic theory to describe the interaction between electrons and K phonons and study its influence on superconductivity in the bare bands of twisted bilayer graphene (TBG). We find that, due to symmetry and the two-center approximation, only one optical K phonon (160meV) of graphene is responsible for the intervalley electron-phonon interaction. Here, this phonon has recently been found in angular-resolved photoemission spectroscopy to be responsible for replicas of the TBG flat bands. By projecting the interaction to the TBG flat bands, we perform the full symmetry analysis of the phonon-mediated attractive interaction and pairing channels in the Chern basis, and show that several channels are guaranteed to have gapless order parameters. From the linearized gap equations, we find that the highest T c pairing induced by this phonon is a singlet gapped s-wave inter-Chern-band order parameter, followed closely by a gapless nematic d-wave intra-Chern-band order parameter. We justify these results analytically, using the topological heavy-fermion mapping of TBG which has allowed us to obtain an analytic form of a phonon-mediated attractive interaction and to analytically solve the linearized and T = 0 gap equations. For the intra-Chern-band channel, the nematic state with nodes is shown to be stabilized in the chiral flat-band limit. While the flat-band Coulomb interaction can be screened sufficiently enough—around the Van Hove singularities—to allow for electron-phonon based superconductivity, it is unlikely that this effect can be maintained in the lower density of states excitation bands around the correlated insulator states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Superconducting and spin-wave orders in Ba 0.6 ⁢K 0.4⁢ Fe 2⁢ As 2 probed by point contact spectroscopy

The doping dependent phase diagram of the iron pnictide systems displays diverse electronic ground states including unconventional superconductivity and magnetic ordering. From previous bulk measurements, it was argued that the superconducting phase of Ba 1-x K x Fe 2 As 2 might be described within a two band formalism where superconductivity emerges with significantly different magnitudes of the pairing amplitude in the different bands. Here, we have performed point contact Andreev reflection spectroscopy on the optimally doped system (x = 0.4) where we found features that misleadingly mimic the signature of multiple gap amplitudes with large energy difference, when the point contacts are away from the ballistic regime. Closer to the ballistic regime, we found two types of spectra. In one type, a single superconducting gap with unusual broadening was found. The broadening might be due to the presence of multiple gap amplitudes with small energy spacing. The other kind of spectra displayed spectral features at ~ 30 meV in the normal state that gradually diminished with increasing temperature and eventually disappeared at 140 K, the spin density wave transition temperature of parent BaFe 2 As 2 . We attribute the 30 meV spectral feature to a characteristic electron-magnon interaction energy scale in the system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Dichroic $K_β$ x-ray emission as a probe of orbital moments

Strong dichroism of the outgoing x rays is demonstrated in $K_β$ x-ray emission. Here, it is shown that while the integrated intensities are zero, the first moments of the dichroic spectra can be directly related to the orbital moments. The first moment is caused by the Coulomb interaction between the 3p core hole and the 3d valence electrons. Contributions from other interactions are negligibly small or zero. Calculations for a divalent cobalt ion in the presence of a Jahn-Teller distortion show strong dependencies of the dichroic $K_β$ emission on the angular momentum and the quadrupolar moment.

van Veenendaal, Michel↗
DOE OSTI2020

Direct CP violation and the ΔI=1/2 rule in K→ππ decay from the standard model

We present a lattice QCD calculation of the Δ I = 1 / 2 , K → π π decay amplitude A 0 and ϵ ' , the measure of direct C P violation in K → π π decay, improving our 2015 calculation [1] of these quantities. Both calculations were performed with physical kinematics on a 32 3 × 64 lattice with an inverse lattice spacing of a - 1 = 1.3784 ( 68 ) GeV . However, the current calculation includes nearly 4 times the statistics and numerous technical improvements allowing us to more reliably isolate the π π ground state and more accurately relate the lattice operators to those defined in the standard model. We find Re ( A 0 ) = 2.99 ( 0.32 ) ( 0.59 ) × 10 - 7 GeV and Im ( A 0 ) = - 6.98 ( 0.62 ) ( 1.44 ) × 10 - 11 GeV , where the errors are statistical and systematic, respectively. The former agrees well with the experimental result Re ( A 0 ) = 3.3201 ( 18 ) × 10 - 7 GeV . These results for A 0 can be combined with our earlier lattice calculation of A 2 [2] to obtain Re ( ϵ ' / ϵ ) = 21.7 ( 2.6 ) ( 6.2 ) ( 5.0 ) × 10 - 4 , where the third error represents omitted isospin breaking effects, and Re ( A 0 ) / Re ( A 2 ) = 19.9 ( 2.3 ) ( 4.4 ) . The first agrees well with the experimental result of Re ( ϵ ' / ϵ ) = 16.6 ( 2.3 ) × 10 - 4 . A comparison of the second with the observed ratio Re ( A 0 ) / Re ( A 2 ) = 22.45 ( 6 ) , demonstrates the standard model origin of this “ Δ I = 1 / 2 rule” enhancement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Stable Solid Molecular Hydrogen above 900 K from a Machine-Learned Potential Trained with Diffusion Quantum Monte Carlo

Here, we survey the phase diagram of high-pressure molecular hydrogen with path integral molecular dynamics using a machine-learned interatomic potential trained with quantum Monte Carlo forces and energies. Besides the HCP and C2/c–24 phases, we find two new stable phases both with molecular centers in the Fmmm–4 structure, separated by a molecular orientation transition with temperature. The high temperature isotropic Fmmm–4 phase has a reentrant melting line with a maximum at higher temperature (1450 K at 150 GPa) than previously estimated and crosses the liquid-liquid transition line around 1200 K and 200 GPa.

08 HYDROGEN↗
DOE OSTI2023

Continuous Spin Excitations in the Three-Dimensional Frustrated Magnet K 2 Ni 2 ⁢(SO 4 ) 3

Continuous spin excitations are widely recognized as one of the hallmarks of novel spin states in quantum magnets, such as quantum spin liquids (QSLs). Here, we report the observation of such kind of excitations in K 2 Ni 2 (SO 4 ) 3 , which consists of two sets of intersected spin-1 (Ni 2+ ) trillium lattices. Our inelastic neutron scattering measurement on single crystals clearly shows a dominant excitation continuum, which exhibits a distinct temperature-dependent behavior from that of spin waves and is rooted in strong quantum spin fluctuations. Further using the self-consistent-Gaussian-approximation method, we determine that the fourth- and fifth nearest-neighbor exchange interactions are dominant. These two bonds together form a unique three-dimensional network of corner-sharing tetrahedra, which we name as a “hypertrillium” lattice. In conclusion, our results provide direct evidence for the existence of QSL features in K 2 Ni 2 (SO 4 ) 3 and highlight the potential for the hypertrillium lattice to host frustrated quantum magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Multicode benchmark on simulated Ti K-edge x-ray absorption spectra of Ti-O compounds

X-ray absorption spectroscopy (XAS) is an element-specific materials characterization technique that is sensitive to structural and electronic properties. First-principles simulated XAS has been widely used as a powerful tool to interpret experimental spectra and draw physical insights. Recently, there has also been growing interest in building computational XAS databases to enable data analytics and machine learning applications. However, there are non-trivial differences among commonly used XAS simulation codes, both in underlying theoretical formalism and in technical implementation. Reliable and reproducible computational XAS databases require systematic benchmark studies. In this work, we benchmarked Ti K-edge XAS simulations of ten representative Ti-O binary compounds, which we refer to as the Ti-O-10 dataset, using three state-of-the-art codes: XSPECTRA, OCEAN and exciting. We systematically studied the convergence behavior with respect to the input parameters and developed a workflow to automate and standardize the calculations to ensure converged spectra. Our benchmark comparison considers a 35 eV spectral range starting from the K-edge onset, representative of widely used near-edge spectra. Quantitative comparison over this range is based on Spearman’s rank correlation score (r sp ). Our results show: (1) the two Bethe-Salpeter equation (BSE) codes (OCEAN and exciting) have excellent agreement with an average $r$ $sp$ of 0.998; (2) good agreement is obtained between the core-hole potential code (XSPECTRA) and BSE codes (OCEAN and exciting) with an average $r$ $sp$ of 0.990, and this smaller $r$ $sp$ reflects the noticeable differences in the main edge spectral shape that can be primarily attributed to the difference in the strength of the screened core-hole potential; (3) simulations from both methods overall reproduce well the main experimental spectral features of rutile and anatase, and the different treatments of the screened core-hole potential have visible impact on pre-edge intensities and the peak ratio of the main edge; (4) there exist moderate differences in the relative edge alignment of the three codes with a standard deviation of about 0.2 eV, which arise from multiple contributions including the frozen core approximation, final state effects, and different approximations used for the self-energy correction. In conclusion, our benchmark study provides important standards for first-principles XAS simulations with broad impact in data-driven XAS analysis.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Cryogenic-Refined MOSFET Modeling for Oscillator, Frequency Divider, and Amplifier Designs Below 4 K

Capturing device characteristic changes at cryogenic temperatures is crucial for cryo-CMOS circuit designs. In this work, we present an isothermal cryogenic-refined modeling approach for CMOS transistors that is simple, low overhead, and easy to implement while offering the required accuracy for predicting circuit performance at the designated temperatures. Guided by die-level measurement data and circuit design principles, the model introduces corrections to only five critical parameters: threshold voltage, carrier mobility, elevated low-frequency flicker noise, dominant high-frequency shot noise, and subthreshold swing (SS). These refinements are implemented around the foundry-provided SPICE model, which is typically validated only down to about 200 K. With these adjustments, the proposed cryogenic-refined model achieves less than 5% error in both large-signal metrics (I–V characteristics) and small-signal parameters (e.g., transconductance) when compared with device measurements at deep-cryogenic temperatures. The methodology is validated in two advanced technologies: TSMC 40-nm CMOS and GlobalFoundries (GF) 45-nm RF-SOI. We further demonstrate its applicability in three representative RF circuits: a 30-GHz LC oscillator, a high-speed current-mode-logic (CML) frequency divider (FD), and a subthreshold Gb/s amplifier, all showing close agreement between simulated predictions and measurements performed at 4 and 2.5 K. Finally, we believe that the proposed approach is implementation-friendly and can significantly accelerate the development of cryo-CMOS integrated circuits.

circuit modeling↗
DOE OSTI2024

Strain phase equilibria and phase‐field method of ferroelectric polydomain: A case study of monoclinic K x Na 1 − x NbO 3 thin films

Abstract Knowledge of the thermodynamic equilibria and domain structures of ferroelectrics is critical to establishing their structure–property relationships that underpin their applications from piezoelectric devices to nonlinear optics. Here, we establish the strain condition for strain phase separation and polydomain formation and analytically predict the corresponding domain volume fractions and wall orientations of, relatively low symmetry and theoretically more challenging, monoclinic ferroelectric thin films by integrating thermodynamics of ferroelectrics, strain phase equilibria theory, microelasticity, and phase‐field method. Using monoclinic K x Na 1 − x NbO 3 (0.5 < x < 1.0) thin films as a model system, we establish the polydomain strain–strain phase diagrams, from which we identify two types of monoclinic polydomain structures. The analytically predicted strain conditions of formation, domain volume fractions, and domain wall orientations for the two polydomain structures are consistent with phase‐field simulations and in good agreement with experimental results in the literature. The present study demonstrates a general, powerful analytical theoretical framework to predict the strain phase equilibria and domain wall orientations of polydomain structures applicable to both high‐ and low‐symmetry ferroelectrics and provide fundamental insights into the equilibrium domain structures of ferroelectric K x Na 1 − x NbO 3 thin films that are of technology relevance for lead‐free dielectric and piezoelectric applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Pressurization Analysis for Heating of a Screw Top Utility Can Loaded With Plutonium Oxide Powder by a 1273 K Fire

The documented safety analysis for the Savannah River National Laboratory (SRNL) evaluates the consequences of a postulated 1273 K fire in a glovebox. The radiological dose consequences for a pressurized release of plutonium oxide powder during such a fire depend on the maximum pressure that is attained inside the oxide storage containers. The oxide storage configuration selected for analysis is can/bag/can, comprised of oxide powder inside an 8.38 × 10 -6 m 3 stainless steel B vial inside 0.006 kg of polyethylene bagging inside a one-quart screw top utility can of the type commonly used to package solvents or rubber cements. To enable evaluation of the dose consequences, temperature and pressure transients have been calculated for exposure of a typical set of storage containers to the fire. The pressurization analysis credits venting to and from the B vial but does not credit venting or leakage from the can. Due to the low rate of venting from the B vial into the can gas space, the can pressure is nearly independent of the B vial pressure. Calculated maximum pressures are compared to the utility can burst pressure. In lieu of a structural analysis of the utility cans, burst pressures and leakage rates were measured using compressed nitrogen gas. The measured gauge burst pressure was 0.250 ± 0.043 MPa. The measured burst pressures are lower than the calculated maximum pressure due to fire exposure, indicating that the utility cans could burst during exposure to a 1273 K fire.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗