Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Interns”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2015

MO-F-CAMPUS-J-03: Sorting 2D Dynamic MR Images Using Internal Respiratory Signal for 4D MRI

Purpose: To develop a novel algorithm to extract internal respiratory signal (IRS) for sorting dynamic magnetic resonance (MR) images in order to achieve four-dimensional (4D) MR imaging. Methods: Dynamic MR images were obtained with the balanced steady state free precession by acquiring each two-dimensional sagittal slice repeatedly for more than one breathing cycle. To generate a robust IRS, we used 5 different representative internal respiratory surrogates in both the image space (body area) and the Fourier space (the first two low-frequency phase components in the anterior-posterior direction, and the first two low-frequency phase components in the superior-inferior direction). A clustering algorithm was then used to search for a group of similar individual internal signals, which was then used to formulate the final IRS. A phantom study and a volunteer study were performed to demonstrate the effectiveness of this algorithm. The IRS was compared to the signal from the respiratory bellows. Results: The IRS computed by our algorithm matched well with the bellows signal in both the phantom and the volunteer studies. On average, the normalized cross correlation between the IRS and the bellows signal was 0.97 in the phantom study and 0.87 in the volunteer study, respectively. The average difference between the end inspiration times in the IRS and bellows signal was 0.18 s in the phantom study and 0.14 s in the volunteer study, respectively. 4D images sorted based on the IRS showed minimal mismatched artifacts, and the motion of the anatomy was coherent with the respiratory phases. Conclusion: A novel algorithm was developed to generate IRS from dynamic MR images to achieve 4D MR imaging. The performance of the IRS was comparable to that of the bellows signal. It can be easily implemented into the clinic and potentially could replace the use of external respiratory surrogates. This research was partially funded by the the Center for Radiation Oncology Research from UT MD Anderson Cancer Center.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

WE-AB-213-00: Developments in International Medical Physics Collaborations in Africa and Latin America

The African Affairs Subcommittee (AA-SC) of the AAPM will present a multi-institutional approach to medical physics support in Africa. Current work to increase the quality of care and level of safety for the medical physics practice in Senegal, Ghana, and Zimbabwe will be presented, along with preliminary projects in Nigeria and Botswana. Because the task of addressing the needs of medical physics in countries across Africa is larger than one entity can accomplish on its own, the AA-SC has taken the approach of joining forces with multiple organizations such as Radiating Hope and TreatSafely (NGO’s), the IAEA, companies like BrainLab, Varian and Elekta, medical volunteers and academic institutions such as NYU and Washington University. Elements of current projects include: 1) Distance training and evaluation of the quality of contouring and treatment planning, teaching treatment planning and other subjects, and troubleshooting using modern telecommunications technology in Senegal, Ghana, and Zimbabwe; 2) Assistance in the transition from 2D to 3D in Senegal and Zimbabwe; 3) Assistance in the transition from 3D to IMRT using in-house compensators in Senegal; 4) Modernizing the cancer center in Senegal and increasing safety and; 5) Training on on 3D techniques in Ghana; 6) Assisting a teaching and training radiation oncology center to be built in Zimbabwe; 7) Working with the ISEP Program in Sub-Saharan Africa; 8) Creating instructional videos on linac commissioning; 9) Working on a possible collaboration to train physicists in Nigeria. Building on past achievements, the subcommittee seeks to make a larger impact on the continent, as the number and size of projects increases and more human resources become available. The State of Medical Physics Collaborations and Projects in Latin America Sandra Guzman (Peru) The lack of Medical Physicists (MP) in many Latin American (LA) countries leads to recruitment of professionals with incomplete education. In most LA countries only one MP responsible for each Center is currently mandated. Currently there is a large disparity among MP training programs and there is significant debate about the standards of MP graduate education in many LA countries. There are no commonly recognized academic programs, not enough clinical training sites and clinical training is not typically considered as part of the MP work. Economic pressures and high workloads also impede the creation of more training centers. The increasing need of qualified MPs require establishing a coordinated system of national Education & Training Centers (ETC), to meet the international standards of education and training in Medical Physics. This shortfall calls for support of organizations such as the IOMP, AAPM, ALFIM, IAEA, etc. Examples from various LA countries, as well as some proposed solutions, will be presented. In particular, we will discuss the resources that the AAPM and its members can offer to support regional programs. The ‘Medical Imaging’ physicist in the emerging world: Challenges and opportunities - Caridad Borrás (WGNIMP Chair) While the role of radiation therapy physicists in the emerging world is reasonably well established, the role of medical imaging physicists is not. The only perceived needs in radiology departments are equipment quality control and radiation protection, tasks that can be done by a technologist or a service engineer. To change the situation, the International Basic Safety Standard, which is adopted/adapted world-wide as national radiation protection regulations, states: “For diagnostic radiological procedures and image guided interventional procedures, the requirements of these Standards for medical imaging, calibration, dosimetry and quality assurance, including the acceptance and commissioning of medical radiological equipment, are fulfilled by or under the oversight of, or with the documented advice of a medical physicist, whose degree of involvement is determined by the complexity of the radiological procedures and the associated radiation risks”. Details on how these requirements can be carried out in resource-limited settings will be described. IAEA support to medical physics in Africa and Latin America: achievements and challenges Ahmed Meghzifene (IAEA) Shortage of clinically qualified medical physicists in radiotherapy and imaging, insufficient and inadequate education and training programs, as well as a lack of professional recognition were identified as the main issues to be addressed by the IAEA. The IAEA developed a series of integrated projects aiming specifically at promoting the essential role of medical physicists in health care, developing harmonized guidelines on dosimetry and quality assurance, and supporting education and clinical training programs. The unique feature of the IAEA approach is support it provides for implementation of guidelines and education programs in Member States through its technical cooperation project. The presentation will summarize IAEA support to Latin America and Africa in the field of medical physics and will highlight how the new International Basic Safety Standards are expected to impact the medical physics practice in low and middle income countries. Learning Objectives: Learn about the shortage of qualified Medical Physicists in Africa and Latin America. Understand the reasons of this shortage. Learn about the ways to improve the situation and AAPM role in this process.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

WE-DE-201-06: Impact of Temporal Image Coregistration Methods On 3D Internal Dose Calculations in Targeted Radionuclide Therapy

Purpose: The calculation of 3D internal dose calculations in targeted radionuclide therapy requires the acquisition and temporal coregistration of a serial PET/CT or SPECT/CT images. This work investigates the dosimetric impact of different temporal coregistration methods commonly used for 3D internal dosimetry. Methods: PET/CT images of four mice were acquired at 1, 24, 48, 72, 96, 144 hrs post-injection of {sup 124}I-CLR1404. The therapeutic {sup 131}I-CLR1404 absorbed dose rate (ADR) was calculated at each time point using a Geant4-based MC dosimetry platform using three temporal image coregistration Methods: (1) no coregistration (NC), whole body sequential CT-CT affine coregistration (WBAC), and individual sequential ROI-ROI affine coregistration (IRAC). For NC, only the ROI mean ADR was integrated to obtain ROI mean doses. For WBAC, the CT at each time point was coregistered to a single reference CT. The CT transformations were applied to the corresponding ADR images and the dose was calculated on a voxel-basis within the whole CT volume. For IRAC, each individual ROI was isolated and sequentially coregistered to a single reference ROI. The ROI transformations were applied to the corresponding ADR images and the dose was calculated on a voxel-basis within the ROI volumes. Results: The percent differences in the ROI mean doses were as large as 109%, 88%, and 32%, comparing the WBAC vs. IRAC, NC vs. IRAC, and NC vs. WBAC methods, respectively. The CoV in the mean dose between the all three methods ranged from 2–36%. The pronounced curvature of the spinal cord was not adequately coregistered using WBAC which resulted in large difference between the WBAC and IRAC. Conclusion: The method used for temporal image coregistration can result in large differences in 3D internal dosimetry calculations. Care must be taken to choose the most appropriate method depending on the imaging conditions, clinical site, and specific application. This work is partially funded by NIH Grant R21 CA198392-01.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2019

Giant impacts stochastically change the internal pressures of terrestrial planets

Pressure is a key parameter in the physics and chemistry of planet formation and evolution. Previous studies have erroneously assumed that internal pressures monotonically increase with the mass of a body. Using smoothed particle hydrodynamics and potential field method calculations, we demonstrate that the hot, rapidly rotating bodies produced by giant impacts can have much lower internal pressures than cool, slowly rotating planets of the same mass. Pressures subsequently increase because of thermal and rotational evolution of the body. Using the Moon-forming impact as an example, we show that the internal pressures after the collision could have been less than half that in present-day Earth. The current pressure profile was not established until Earth cooled and the Moon receded, a process that may take up to tens of millions of years. Our work defines a new paradigm for pressure evolution during accretion of terrestrial planets: stochastic changes driven by impacts.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Analyses of internal structures and defects in materials using physics-informed neural networks

Characterizing internal structures and defects in materials is a challenging task, often requiring solutions to inverse problems with unknown topology, geometry, material properties, and nonlinear deformation. Here, we present a general framework based on physics-informed neural networks for identifying unknown geometric and material parameters. By using a mesh-free method, we parameterize the geometry of the material using a differentiable and trainable method that can identify multiple structural features. We validate this approach for materials with internal voids/inclusions using constitutive models that encompass the spectrum of linear elasticity, hyperelasticity, and plasticity. We predict the size, shape, and location of the internal void/inclusion as well as the elastic modulus of the inclusion. Our general framework can be applied to other inverse problems in different applications that involve unknown material properties and highly deformable geometries, targeting material characterization, quality assurance, and structural design.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Formation of an internal transport barrier and magnetohydrodynamic activity in experiments with the controlled density of rational magnetic surfaces in the T-10 Tokamak

Results are presented from experiments on the formation of an internal electron transport barrier near the q = 1.5 rational surface in the T-10 tokamak. The experiments were carried out in the regime with off-axis electron cyclotron resonance (ECR) heating followed by a fast plasma current ramp-up. After suppressing sawtooth oscillations by off-axis ECR heating, an internal transport barrier began to form near the q = 1.5 rational surface. In the phase of the current ramp-up, the quality of the transport barrier improved; as a result, the plasma energy confinement time increased 2–2.5 times. The intentionally produced flattening of the profile of the safety factor q(r) insignificantly affected magnetohydrodynamic activity in the plasma column in spite of the theoretical possibility of formation of substantial m/n = 3/2 and 2/1 magnetic islands. Conditions are discussed under which the flattening of the profile of the safety factor q near low-order rational surfaces leads to the formation of either an internal transport barrier or the development of an island magnetic structure induced by tearing modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2018

Exploiting Internal Parallelism for Address Translation in Solid-State Drives

Solid-state Drives (SSDs) have changed the landscape of storage systems and present a promising storage solution for data-intensive applications due to their low latency, high bandwidth, and low power consumption compared to traditional hard disk drives. SSDs achieve these desirable characteristics using internal parallelism—parallel access to multiple internal flash memory chips—and a Flash Translation Layer (FTL) that determines where data are stored on those chips so that they do not wear out prematurely. However, current state-of-the-art cache-based FTLs like the Demand-based Flash Translation Layer (DFTL) do not allow IO schedulers to take full advantage of internal parallelism, because they impose a tight coupling between the logical-to-physical address translation and the data access. In this study to address this limitation, we introduce a new FTL design called Parallel-DFTL that works with the DFTL to decouple address translation operations from data accesses. Parallel-DFTL separates address translation and data access operations into different queues, allowing the SSD to use concurrent flash accesses for both types of operations. We also present a Parallel-LRU cache replacement algorithm to improve the concurrency of address translation operations. To compare Parallel-DFTL against existing FTL approaches, we present a Parallel-DFTL performance model and compare its predictions against those for DFTL and an ideal page-mapping approach. We also implemented the Parallel-DFTL approach in an SSD simulator using real device parameters, and used trace-driven simulation to evaluate Parallel-DFTL’s efficacy. Our evaluation results show that Parallel-DFTL improved the overall performance by up to 32% for the real IO workloads we tested, and by up to two orders of magnitude with synthetic test workloads. Finally, we also found that Parallel-DFTL is able to achieve reasonable performance with a very small cache size and that it provides the best benefit for those workloads with large request size or with high write ratio.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Thermal Runaway of Li-Ion Cells: How Internal Dynamics, Mass Ejection, and Heat Vary with Cell Geometry and Abuse Type

Thermal runaway of lithium-ion batteries can involve various types of failure mechanisms each with their own unique characteristics. Using fractional thermal runaway calorimetry and high-speed radiography, the response of three different geometries of cylindrical cell (18650, 21700, and D-cell) to different abuse mechanisms (thermal, internal short circuiting, and nail penetration) are quantified and statistically examined. Correlations between the geometry of cells and their thermal behavior are identified, such as increasing heat output per amp-hour (kJ Ah −1 ) of cells with increasing cell diameter during nail penetration. High-speed radiography reveals that the rate of thermal runaway propagation within cells is generally highest for nail penetration where there is a relative increase in rate of propagation with increasing diameter, compared to thermal or internal short-circuiting abuse. For a given cell model tested under the same conditions, a distribution of heat output is observed with a trend of increasing heat output with increased mass ejection. Finally, internal temperature measurements using thermocouples embedded in the penetrating nail are shown to be unreliable thus demonstrating the need for care when using thermocouples where the temperature is rapidly changing. All data used in this manuscript are open access through the NREL and NASA Battery Failure Databank.

25 ENERGY STORAGE↗
DOE OSTI2018

Testing Lithium-Ion Battery with the Internal Reference Electrode: An Insight into the Blocking Effect

Long-term stability of reference electrode is a major issue in lithium-ion batteries. A composite Ni-Li reference electrode (RE) with a longer lifetime than traditional Cu-wire Li reference electrodes is proposed in this study. However, the larger size of the Ni-Li RE creates a blocking effect when positioned internally in the battery. The blocking effect manifests as an abnormal feature in the measured electrode potential. A two-dimensional (2D) finite element model of the cell with an internal RE is constructed to investigate the mechanism of the blocking effect. The internal RE blocks the path of local current flow in the electrolyte, and decreases the electrochemical reaction rate of particles in the anode and cathode, leading to measurement errors. Characteristic lengths of RE and applied currents were examined as parameters in the finite element model to determine their effect on the magnitude of error. A useful guide is provided for proper selection of size of RE and applied current in dynamic tests of lithium-ion batteries.

2-D finite element model↗
DOE OSTI2017

Tracking Internal Temperature and Structural Dynamics during Nail Penetration of Lithium-Ion Cells

Mechanical abuse of lithium-ion batteries is widely used during testing to induce thermal runaway, characterize associated risks, and expose cell and module vulnerabilities. But, the repeatability of puncture or 'nail penetration' tests is a key issue as there is often a high degree of variability in the resulting thermal runaway process. Here, the failure mechanisms of 18650 cells punctured at different locations and orientations are characterized with respect to their internal structural degradation, and both their internal and surface temperature, all of which are monitored in real time. The initiation and propagation of thermal runaway is visualized via high-speed synchrotron X-ray radiography at 2000 frames per second, and the surface and internal temperatures are recorded via infrared imaging and a thermocouple embedded in the tip of the penetrating nail, respectively. The influence of the nail, as well as how and where it penetrates the cell, on the initiation and propagation of thermal runaway is described and the suitability of this test method for representing in-field failures is discussed.

25 ENERGY STORAGE↗
DOE OSTI2020

Facilitating International Collaboration on Climate Change Research

The Chinese American Oceanic and Atmospheric Association (COAA) organized the 8th COAA International Conference on Atmosphere, Ocean, and Climate Change (ICAOCC), which was held at the Nanjing University of Information Science and Technology (NUIST) campus in Nanjing, China during July 10-12, 2019. The conference was locally hosted by NUIST and co-sponsored by Nanjing University. This international conference provided a platform for weather and climate experts in the international oceanic and atmospheric sciences community to communicate their research, share ideas and experiences, inspire new research strategies and identify opportunities for future collaborations. It also provided a great opportunity for students and young scholars to forge professional relationships and be more aware of cutting-edge research areas through their interactions with experts and senior professionals.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

Externally Forced and Internally Generated Decadal Climate Variability Associated with the Interdecadal Pacific Oscillation

Globally averaged surface air temperatures in some decades reflect rapid increases (accelerated warming decades), and in other decades there is no warming trend (hiatus decades). A previous report showed that the net energy imbalance at the top of the atmosphere of about 1 W m –2 is associated with greater increases of deep ocean heat content below 750 m during the hiatus decades, while there is little globally averaged surface temperature increase or warming in the upper ocean layers. Here the authors observe processes involved with accelerated warming decades and address the relative roles of external forcing from increasing greenhouse gases and internally generated decadal climate variability associated with interdecadal Pacific oscillation (IPO). Model results from the Community Climate System Model, version 4 (CCSM4), show that accelerated warming decades are characterized by rapid warming of globally averaged surface air temperature, greater increases of heat content in the upper ocean layers, and less heat content increase in the deep ocean, opposite to the hiatus decades. In addition to contributions from processes potentially linked to Antarctic Bottom Water (AABW) formation and the Atlantic meridional overturning circulation (AMOC), the positive phase of the IPO, adding to the response to external forcing, is usually associated with accelerated warming decades. Conversely, hiatus decades typically occur with the negative phase of the IPO, when warming from the external forcing is overwhelmed by internally generated cooling in the tropical Pacific. Internally generated hiatus periods of up to 15 years with zero global warming trend are present in the future climate simulations. This suggests that there is a chance that the current observed hiatus could extend for several more years.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

Roles of SST versus Internal Atmospheric Variability in Winter Extreme Precipitation Variability along the U.S. West Coast

The U.S. West Coast exhibits large variability of extreme precipitation during the boreal winter season (December–February). Understanding the large-scale forcing of such variability is important for improving prediction. This motivates analyses of the roles of sea surface temperature (SST) forcing and internal atmospheric variability on extreme precipitation on the U.S. West Coast. Observations, reanalysis products, and an ensemble of Atmospheric Model Intercomparison Project (AMIP) experiments from phase 5 of the Coupled Model Intercomparison Project (CMIP5) are analyzed. It is found that SST forcing only accounts for about 20% of the variance of both extreme and nonextreme precipitation in winter. Under SST forcing, extreme precipitation is associated with the Pacific–North American teleconnection, while nonextreme precipitation is associated with the North Pacific Oscillation. The remaining 80% of extreme precipitation variations can be explained by internal atmospheric dynamics featuring a circumglobal wave train with a cyclonic circulation located over the U.S. West Coast. The circumglobal teleconnection manifests from the mid- to high-latitude intrinsic variability, but it can also emanate from anomalous convection over the tropical western Pacific, with stronger tropical convection over the Maritime Continent setting the stage for more extreme precipitation in winter. Whether forced by SST or internal atmospheric dynamics, atmospheric rivers are a common and indispensable feature of the large-scale environment that produces concomitant extreme precipitation along the U.S. West Coast.

Dong, Lu↗
DOE OSTI2023

Evolution of the Internal Climate Modes under Future Warming

Abstract Climate modes play an important role in weather and climate variability over multiple spatial and temporal scales. This research assesses Earth system model (ESM) projections of the spatiotemporal characteristics of key internal climate modes (NAM, SAM, PNA, ENSO, PDO, and AMO) under high (SSP585) and low (SSP126) radiative forcing scenarios and contextualizes those projections using historical fidelity. Time series analyses are used to assess trends and mode phase characteristics are summarized for the historical period and for the end of the twenty-first century. Spatial patterns are compared to infer morphological changes. Shifts in the power spectra are used to examine changes in variability at subannual, interannual, and interdecadal scales. Changes in time-lagged correlations are used to capture the evolution of first-order interactions. While differences in historical skill are predominantly ESM dependent, changing mode characteristics in a warmer climate also exhibit variability between individual ensemble realizations. NAM, SAM, and ENSO tend to evolve toward increased prevalence of the positive phase up to 2100 across the multimodel ensemble while the PNA and PDO exhibit little trend but increasing phase intensity. AMO characteristics are shown to depend on the method used to remove the external signal. ESMs that show higher historical fidelity tend to show more modest changes in those modes under global nonstationarity. Changes in mode interactions are found to be highly ESM dependent but exhibit broadly similar behavior to historical relationships. These findings have implications for our understanding of internal variability and make clear that the choice of ESM, and even the ESM realization, matters for applications of climate projections. Significance Statement Internal modes of variability are important to understand due to their impact on local, regional, and global weather and climate patterns. Future climate changes will not only be affected by the variability arising from these modes, but the modes will themselves change in response to the changing climate. Spatial and temporal aspects of the modes are assessed from projections of future climate and related to how well they are captured in the historical climate. This yields some measure of confidence in the changes exhibited by the models. In most cases, when historically skillful models exhibit changes that are different from those produced by less skillful models, they tend to produce more modest changes. These results, as well as the variability between model outcomes, mean decisions on which ESM to use for projections of the future climate matter significantly.

Meteorology & Atmospheric Sciences↗
DOE OSTI2021

The effect of transient needle lift on the internal flow and near-nozzle spray characteristics for modern GDI systems investigated by high-speed X-ray imaging

The development of the injector nozzle is a dynamic area in regard of several technical aspects. At first, the internal flow influences the near-field spray characteristics via various phenomena such as cavitation and turbulence. However, these phenomena are not fully understood due to their extremely fast, complex and multiscale nature. Furthermore, it governs the spray targeting inside the combustion chamber. High-speed X-ray imaging of GDI injector nozzles is performed in this study. The experimental results presented are related to the internal flow and primary breakup of discharged liquid jets. The injectors used are equipped with nozzles made of aluminum which have been specially developed for these investigations to enhance optical accessibility. The visualization of the needle motion, in-nozzle flow and the primary breakup region provides several exciting observations. First, the needle lift tracking exhibits short overshooting right before the steady-state of the injection phase. Additionally, this event leads to a short-term, however, significant change in the associated performance of the breakup. This phenomenon is found to be a consequence of the transient behavior of the in-nozzle flow. It is shown that under some circumstances hydraulic flip may occur during this overshooting period. The primary jet breakup region is visualized and evaluated by means of image processing. Thus, the transient behavior of liquid jet expansion is quantified in the vicinity of the nozzle. It is observed that the liquid jet direction deviates from the hole axis already at the nozzle outlet, which is caused by internal flow characteristics.

42 ENGINEERING↗
DOE OSTI2014

An Overview of the International Reactor Physics Experiment Evaluation Project

Interest in high-quality integral benchmark data is increasing as efforts to quantify and reduce calculational uncertainties associated with advanced modeling and simulation accelerate to meet the demands of next generation reactor and advanced fuel cycle concepts. Two Organization for Economic Cooperation and Development (OECD) Nuclear Energy Agency (NEA) activities, the International Criticality Safety Benchmark Evaluation Project (ICSBEP), initiated in 1992, and the International Reactor Physics Experiment Evaluation Project (IRPhEP), initiated in 2003, have been identifying existing integral experiment data, evaluating those data, and providing integral benchmark specifications for methods and data validation for nearly two decades. Data provided by those two projects will be of use to the international reactor physics, criticality safety, and nuclear data communities for future decades. An overview of the IRPhEP and a brief update of the ICSBEP are provided in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

The domestic and international implications of future climate for U.S. agriculture in GCAM

Agriculture yields are susceptible to changes in future temperature, precipitation, and other Earth system factors. Future changes to these physical Earth system attributes and their effects on agricultural yields are highly uncertain. United States agricultural producers will be affected by such changes whether they occur domestically or internationally (via international commodity markets). How important to U.S. agriculture are domestic changes due to climate compared to those occurring externally? Here we show that potential direct impacts to United States agriculture have financial impacts on U.S. producers that are roughly similar in magnitude but opposite in sign to impacts on U.S. producers due to changes in other parts of the world. This finding is robust across application of a wide range of potential future crop yield impacts applied to a multi-sector global integrated assessment model. Therefore, when examining country-specific impacts, it is necessary to model both the domestic and international impacts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

Proceedings of the Third International Workshop on Jointed Structures.

The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics.

Starr, Michael James↗