Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Study on the Reliability of Carbon Nanotube-Reinforced Sn-58Bi Lead-Free Solder Joints

The wettability, microstructure and mechanical properties of multi-walled carbon nanotube (CNT)-reinforced Sn-58Bi composite solder joints were investigated. The results indicate that the wettability of the Sn-58Bi solder is improved and the growth of interfacial intermetallic (IMC) compounds for solder joints is restrained by CNTs. The thickness of the IMC layers is decreased with increasing CNTs concentration. The microstructure of the Sn-58Bi composite solders is refined, the maximum tensile strength and shear strength are obtained by adding the optimum CNTs content about 0.01 wt.%. However, excessive content of CNTs addition can deteriorate the properties. The creep rupture life of Sn-58Bi solder joint and Sn-58Bi-0.01CNTs solder joint is decreased with increasing load, temperature and current density. The average creep rupture life of Sn-58Bi-0.01CNTs composite solder joint is 60% higher than that of the plain solder joint.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Discovery and characterization of magnetism in sigma-phase intermetallic Fe-Re compounds

Systematic experimental studies (vibrating sample magnetometry) supported by theoretical calculations (electronic structure by spin self-consistent Korringa-Kohn-Rostoker Green's function method) were performed on a series of intermetallic sigma-phase Fe{sub 100−x}Re{sub x} (x = 43–53) compounds. All investigated samples exhibit magnetism with an ordering temperature ranging between ∼65 K for x = 43 and ∼23 K for x = 53. The magnetism was revealed to be itinerant and identified as a spin-glass (SG) possibly having a re-entrant character. The SG was found to be heterogeneous, viz., two regimes could be distinguished as far as irreversibility in temperature dependence of magnetization is concerned: (1) of a weak irreversibility and (2) of a strong one. According to the theoretical calculations, the main contribution to the magnetism comes from Fe atoms occupying all five sub lattices, while Re atoms have rather small magnetic moments. However, the calculated average magnetic moments highly (ferromagnetic ordering model) or moderately (antiparallel ordering model) overestimate the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Theoretical studies of strongly correlated rare-earth intermetallics RIn₃ and RSn₃ (R=Sm, Eu, and Gd)

In this paper, the structural, elastic, and electronic properties of RIn₃ and RSn₃ (R = Sm, Eu, Gd) compounds have been investigated using the full potential linearized augmented plane wave plus local orbital method within the density functional theory. The structural properties are investigated using the LDA, GGA, and the band correlated LDA+U and GGA+U schemes. The lattice parameters are in good agreement with the available experimental results and the divalent state of Eu is also verified. The spin-orbit coupling is included in order to predict the correct electronic properties and splitting of 4f states of the rare earth elements is also incorporated. We calculated Bulk modulus, shear modulus, Young's modulus, anisotropic ratio, Kleinman parameters, Poisson's ratio, Lame's co-efficient, sound velocities for shear and longitudinal waves, and Debye temperature. We also predict the Cauchy pressure and B/G ratio in order to explore the ductile and brittle behaviors of these compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogen in polar intermetallics: Syntheses and structures of the ternary Ca{sub 5}Bi{sub 3}D{sub 0.93}, Yb{sub 5}Bi{sub 3}H{sub x}, and Sm{sub 5}Bi{sub 3}H{sub a}pprox{sub 1} by powder neutron or single crystal X-ray diffraction

The syntheses of the title compounds are described in detail. Structural characterizations from refinements of single crystal X-ray diffraction data for Yb{sub 5}Bi{sub 3}H{sub x} and Sm{sub 5}Bi{sub 3}H{sub a}pprox{sub 1} and of powder neutron diffraction data for Ca{sub 5}Bi{sub 3}D{sub 0.93(3)} are reported. These confirm that all three crystallize with the heavy atom structure type of beta-Yb{sub 5}Sb{sub 3}, and the third gives the first proof that the deuterium lies in the center of nominal calcium tetrahedra, isostructural with the Ca{sub 5}Sb{sub 3}F-type structure. These Ca and Yb phases are particularly stable with respect to dissociation to Mn{sub 5}Si{sub 3}-type product plus H{sub 2}. Some contradictions in the literature regarding Yb{sub 5}Sb{sub 3} and Yb{sub 5}Sb{sub 3}H{sub x} phases are considered in terms of adventitious hydrogen impurities that are generated during reactions in fused silica containers at elevated temperatures. - Graphical abstract: The structure of Ca{sub 5}Bi{sub 3}H{sub 0.93} occurs in the novel Ca{sub 5}Sb{sub 3}F structure type with D centered in the shaded calcium tetrahedra.

36 MATERIALS SCIENCE↗

Crystallochemistry of the novel two-layer RECuMg{sub 4} (RE=La, Tb) ternary compounds

The crystal structures of the new ternary compounds LaCuMg{sub 4} and TbCuMg{sub 4} were studied by X-ray powder diffraction and single-crystal methods, respectively. Scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDXS) was used for examining microstructure and phase composition. LaCuMg{sub 4} crystallizes in the UCoAl{sub 4} structure type (space group P6-bar 2m, Pearson code hP18, a=1.03911(1), c=0.45126(1) nm, Z=3, R{sub F}=0.0654), while TbCuMg{sub 4} exhibits a new structure (space group Cmmm, Pearson code oS48, a=1.35797(6), b=2.03333(9), c=0.39149(2) nm, Z=8, wR{sub 2}=0.0426). Both structures represent a family of two-layer compounds. All interatomic distances indicate metallic type bonding. The structural peculiarities of these compounds and their relations are discussed. - Graphical abstract: Slightly distorted body centered Mg blocks as structural motifs in the LaCuMg{sub 4} and TbCuMg{sub 4} compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

YMgGa as a hydrogen storage compound

The hydrogen absorption and desorption properties of the recently found ternary phase YMgGa have been studied. This compound absorbs 2.2 wt% hydrogen during the first cycle, but only 1.1 wt% can be stored reversibly for the following cycles under the applied pressure and temperature conditions. Hydrogen absorption and desorption properties were investigated by measuring the thermal desorption spectra and the pressure-composition isotherms while the crystal structure was determined using X-ray diffraction (XRD). The compound absorbs hydrogen at pressures above 0.2 MPa and 250 deg. C by decomposing into YH{sub 3} and MgGa. This reaction is reversed when heating the hydride in a He atmosphere; hydrogen is released and the YMgGa phase is partially recovered together with YGa{sub 2} and YH{sub 2}. The reformation of YMgGa occurs at temperatures below 450 deg. C on the expenses of hydrogen desorption from YH{sub 2}. This is not expected under these temperature conditions as YH{sub 2} normally does not desorb hydrogen below 800 deg. C. - Graphical abstract: Hydrogen absorption in YMgGa studied by in situ powder X-ray diffraction. The hydrogen absorption and desorption properties were investigated by thermal desorption spectra and pressure-composition isotherms.

36 MATERIALS SCIENCE↗

X-ray diffraction, optical microscopy, and microhardness studies of gas nitrided titanium alloys and titanium aluminide

Thermochemical surface gas nitriding of {beta}21s, Timetal 205 and a Ti-Al alloy was conducted using differential scanning calorimeter equipment, in nominally pure nitrogen at 850 deg. C and 950 deg. C ({beta}21s), 730 deg. C and 830 deg. C (Timetal 205), and 950 deg. C and 1050 deg. C (Ti-Al) for 1 h, 3 h and 5 h. X-ray diffraction analyses showed new phases formed in the nitrided layer, depending on the alloy and the time and the temperature of nitriding. Microstructures were analyzed using optical microscopy. Cross-sectional microhardness profiles of cross-sectional samples after nitriding were obtained using a Knoop indenter.

36 MATERIALS SCIENCE↗

Pressure effects on crystal structures and magnetic properties of RCo{sub 5} (R = Y or Gd) compounds

The pressure dependences of crystal structures and magnetic properties of YCo{sub 5} and GdCo{sub 5} compounds are analysed based on band structure calculations. Isomorphic transitions were evidenced for relative volumes v/v{sub 0} = 0.91 and 0.86, for YCo{sub 5} and GdCo{sub 5}, respectively. At the transition, there is a higher decrease of cobalt moments at 3g sites as compared to those located in 2c ones. The induced polarizations on Y4d and Gd5d bands, by short range interactions, are linearly dependent on the magnetizations of cobalt atoms situated in their neighborhood. The isomorphic transitions are analysed in correlations with band structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Giant volume magnetostriction in the Y{sub 2}Fe{sub 17} single crystal at room temperature

An investigation of the Y{sub 2}Fe{sub 17} compound belonging to the class of intermetallic alloys of rare-earth and 3d-transition metals is presented. The magnetization, magnetostriction, and thermal expansion of the Y{sub 2}Fe{sub 17} single crystal were studied. The forced magnetostriction and magnetostriction constants were investigated in the temperature range of the magnetic ordering close to the room temperature. The giant field induced volume magnetostriction was discovered in the room temperature region in the magnetic field up to 1.2 T. The contributions of both anisotropic single-ion and isotropic pair exchange interactions to the volume magnetostriction and magnetostriction constants were determined. The experimental results were interpreted within the framework of the Standard Theory of Magnetostriction and the Landau thermodynamic theory. It was found out that the giant values of the volume magnetostriction were caused by the strong dependence of the 3d-electron Coulomb charge repulsion on the deformations and width of the 3d-electron energy band.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

YPdSn and YPd{sub 2}Sn: Structure, {sup 89}Y solid state NMR and {sup 119}Sn Moessbauer spectroscopy

The stannides YPdSn and YPd{sub 2}Sn were synthesized by high-frequency melting of the elements in sealed tantalum tubes. Both structures were refined on the basis of single crystal X-ray diffractometer data: TiNiSi type, Pnma, a=715.4(1), b=458.8(1), c=789.1(1) pm, wR2=0.0461, 510 F{sup 2} values, 20 variables for YPdSn and MnCu{sub 2}Al type, Fm3 Macron m, a=671.44(8), wR2=0.0740, 55 F{sup 2} values, 5 parameters for YPd{sub 2}Sn. The yttrium atoms in the new stannide YPdSn are coordinated by two tilted Pd{sub 3}Sn{sub 3} hexagons (ordered AlB{sub 2} superstructure). In the Heusler phase YPd{sub 2}Sn each yttrium atom has octahedral tin coordination and additionally eight palladium neighbors. The cubic site symmetry of yttrium is reflected in the {sup 119}Sn Moessbauer spectrum which shows no quadrupole splitting. In contrast, YPdSn shows a single signal at {delta}=1.82(1) mm/s subjected to quadrupole splitting of {Delta}E{sub Q}=0.93(1) mm/s. Both compounds have been characterized by high-resolution {sup 89}Y solid state NMR spectroscopy, which indicates the presence of strong Knight shifts. The spectrum of YPd{sub 2}Sn is characterized by an unusually large linewidth, suggesting the presence of a Knight shift distribution reflecting local disordering effects. The range of {sup 89}Y Knight shifts of several binary and ternary intermetallic yttrium compounds is briefly discussed. - Graphical abstract: YPdSn and YPd{sub 2}Sn: Structure, {sup 89}Y solid state NMR and {sup 119}Sn Moessbauer spectroscopy. Highlights: Black-Right-Pointing-Pointer Synthesis and structure of ternary stannides YPdSn and YPd{sub 2}Sn. Black-Right-Pointing-Pointer {sup 119}Sn Moessbauer spectroscopic investigation of YPdSn and YPd{sub 2}Sn. Black-Right-Pointing-Pointer {sup 89}Y solid state NMR of intermetallics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of cooling rate and Co content on the formation of Fe-rich intermetallics in hypoeutectic Al7Si0.3Mg alloy with 0.5%Fe

Highlights: • Co element is firstly used in Al-0.7Si-0.3Mg alloy with 0.5 wt.% Fe to modify the morphology of Fe-rich intermetallics. • 0.75 wt.% Co addition is sufficient to suppress the undesirable effect of acicular Fe-rich intermetallics. • Co/Fe ratio determine the morphology and crystal structure of intermetallics and the optical ratio is in the range of 1-2. - Abstract: The effects of cooling rate and Co addition (0–1 wt%) on the Fe-rich intermetallics in Al7Si0.3Mg alloy with 0.5%Fe were studied in this study. The evolution of microstructure and crystal structure have been characterized by metallographic and transmission electron microscopy. The results indicated that higher cooling rate and Co addition were beneficial to modify the morphology and decrease the size of Fe-rich intermetallics. At the particular cooling rate of 2 k/s, 0.75 wt% Co was proved to be sufficient to improving the morphology of intermetallics from harmful acicular β-Al5FeSi phase to Chinese script or skeleton α-Al15(Fe,Co)3Si2 phase. Above all, the Co/Fe ratio in intermetallics was found to be an importance parameter in determining the morphology and crystal structure of (Fe,Co)-rich intermetallics. With the ratio increased from 0 to 3, the morphology changed gradually: acicular shape→short rod-like shape→Chinese script/skeleton like shape→rod-like shape. And the crystal structure of (Fe,Co)-rich intermetallics evolved from Monoclinic→Hexagonal→Simple cubic→Body-centered structure correspondingly. The optimal ratio of Co to Fe in intermetallics, which has Chinese script with hexagonal structure, was in the range of 1–2.

36 MATERIALS SCIENCE↗

SrAgZn and EuAgZn with KHg{sub 2}-type structure—Structure, magnetic properties, and {sup 151}Eu Mössbauer spectroscopy

Samples of SrAgZn and EuAgZn were synthesized by reaction of the elements in sealed tantalum crucibles. Both structures were refined on the basis of single crystal X-ray diffractometer data: KHg{sub 2}-type, Imma, a=476.7(1), b=780.9(2), c=810.1(2) pm, R{sub 1}/wR{sub 2}=0.0189/0.0119, 381 F² values for SrAg{sub 1.12}Zn{sub 0.88} and a=474.43(9), b=760.8(2), c=799.0(2) pm, R{sub 1}/wR{sub 2}=0.0226/0.0483, 370 F² values for EuAg{sub 1.17}Zn{sub 0.83} with 13 variables per refinement. Silver and zinc are randomly distributed on the Hg position and build up three-dimensional networks. EuAgZn shows ferromagnetic ordering at 29(1) K. In the temperature range from 75 to 300 K the sample shows Curie–Weiss behaviour with μ{sub eff}=7.87(1) μ{sub B}/Eu atom and θ{sub P}=37.1(1) K, indicating divalent europium. {sup 151}Eu Mössbauer spectroscopic measurements confirmed the divalent state with an isomer shift of −9.31 mm/s at 78 K. Temperature dependent {sup 151}Eu data show first magnetic hyperfine field splitting at 25 K and a saturated magnetization of 17 T at 5.2 K. The temperature dependence can be described by an S=7/2 Brillouin function. - Graphical abstract: The near neighbor coordination of the strontium and europium atoms in SrAg{sub 1.12}Zn{sub 0.88}, EuAg{sub 1.17}Zn{sub 0.83}, and EuAuZn. - Highlights: • Synthesis of new intermetallic zinc compounds SrAgZn and EuAgZn. • Ferromagnetic ordering of EuAgZn at 29 K. • Magnetic hyperfine field splitting in the {sup 151}Eu Mössbauer spectrum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab-initio calculation of structural, electronic, and optical characterizations of the intermetallic trialuminides ScAl{sub 3} compound

We present first-principles study of the electronic and the optical properties for the intermetallic trialuminides ScAl{sub 3} compound using the full-potential linear augmented plane wave method within density-functional theory. We have employed the generalized gradient approximation (GGA), which is based on exchange-correlation energy optimization to calculate the total energy. Also we have used the Engel-Vosko GGA formalism, which optimizes the corresponding potential for calculating the electronic band structure and optical properties. The electronic specific heat coefficient ({gamma}), which is a function of density of states, can be calculated from the density of states at Fermi energy N(E{sub F}). The N(E{sub F}) of the phase L1{sub 2} is found to be lower than that of D0{sub 22} structure which confirms the stability of L1{sub 2} structure. We found that the dispersion of the band structure of D0{sub 22} is denser than L1{sub 2} phase. The linear optical properties were calculated. The evaluations are based on calculations of the energy band structure. - Graphical abstract: Crystal structure of L1{sub 2} (a) and D0{sub 22} (b) phases of ScAl{sub 3} compound.

36 MATERIALS SCIENCE↗

Er{sub 17}Ru{sub 6}Te{sub 3}: A highly condensed metal-rich ternary telluride

Er{sub 17}Ru{sub 6}Te{sub 3} is obtained from high-temperature solid-state reactions in tantalum ampoules. The structure according to single-crystal X-ray diffraction is monoclinic, C2/m (no. 12), Z=4, a=40.185(8) A, b=3.9969(8) A, c=16.037(3) A, {beta}=95.12(3){sup o}, V=2565.5(9) A{sup 3}. The condensed structure consists of a complex intermetallic network of intergrown sheets of edge-sharing tetrakaidecahedra (tricapped trigonal prisms, TCTP), and pairs of rectangular-face-sharing bicapped trigonal prisms (BCTP) built of erbium and centered by ruthenium. This array also contains isolated columns of TCTP erbium normal to these sheets that contain tellurium. Basal face sharing of all Er polyhedra along the short b-axis gives rise to the three-dimensional network. Synthesis and the crystal structure of the compound are discussed. - Graphical abstract: A 3D structure built of bi- and tricapped trigonal prisms centered by Ru or Te.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Predicting defect behavior in B2 intermetallics by merging ab initio modeling and machine learning

We present a combination of machine learning and high throughput calculations to predict the points defects behavior in binary intermetallic (A-B) compounds, using as an example systems with the cubic B2 crystal structure (with equiatomic AB stoichiometry). To the best of our knowledge, this work is the first application of machine learning-models for point defect properties. High throughput first principles density functional calculations have been employed to compute intrinsic point defect energies in 100 B2 intermetallic compounds. The systems are classified into two groups: (i) those for which the intrinsic defects are antisites for both A and B rich compositions, and (ii) those for which vacancies are the dominant defect for either or both composition ranges. The data was analyzed by machine learning-techniques using decision tree, and full and reduced multiple additive regression tree (MART) models. Among these three schemes, a reduced MART (r-MART) model using six descriptors (formation energy, minimum and difference of electron densities at the Wigner-Seitz cell boundary, atomic radius difference, maximal atomic number and maximal electronegativity) presents the highest fit (98 %) and predictive (75 %) accuracy. This model is used to predict the defect behavior of other B2 compounds, and it is found that 45 % of the compounds considered feature vacancies as dominant defects for either A or B rich compositions (or both). The ability to predict dominant defect types is important for the modeling of thermodynamic and kinetic properties of intermetallic compounds, and the present results illustrate how this information can be derived using modern tools combining high throughput calculations and data analytics.

97 MATHEMATICS AND COMPUTING↗

Solid-state transformation of Fe-rich intermetallic phases in Al–5.0Cu–0.6Mn squeeze cast alloy with variable Fe contents during solution heat treatment

The Al–5.0 wt.% Cu–0.6 wt.% Mn alloys with a variable Fe content were prepared by squeeze casting. Optical microscopy (OM), Deep etching technique, scanning electron microscopy(SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to examine the solid-state transformation of Fe-rich intermetallics during the solution heat treatment. The results showed that the Chinese script-like α-Fe, Al{sub 6}(FeMn) and needle-like Al{sub 3}(FeMn) phases transform to a new Cu-rich β-Fe (Al{sub 7}Cu{sub 2}(FeMn)) phase during solution heat treatment. The possible reaction and overall transformation kinetics of the solid-state phase transformation for the Fe-rich intermetallics were investigated. - Graphical abstract: Display Omitted - Highlights: • The α-Fe, Al{sub 6}(FeMn) and Al{sub 3}(FeMn) phases change to the β-Fe phases. • Possible reactions of Fe phases during solution heat treatment are discussed. • The overall fractional transformation rate follows an Avrami curve.

36 MATERIALS SCIENCE↗

Interfacial characterization by TEM and nanoindentation of W-Eurofer brazed joints for the first wall component of the DEMO fusion reactor

Highlights: • Interfacial characterization of W-Eurofer joints by TEM and nanoindentation has been accomplished. • Microstructural and mechanical properties were in complete agreement. • The combination of both nano-techniques allows to obtain valuable information about braze interfaces. - Abstract: The interfacial characterization of W-Eurofer brazed joints, which could be implemented in the first wall component of the future DEMO nuclear fusion reactor, has been carried out by TEM and nanoindentation. The Eurofer-braze interface is characterized by the formation of two reaction layers formed during the melting stage of the filler in the brazing process, which reported high hardness and modulus values. The obtained microstructure supposes a homogenous transition between the base material and the braze. However, in the W-braze interface a more defined interface is formed, where the presence of an intermetallic transition compound has been identified. The combination of both techniques allows to study the resultant microstructure and to analyze the mechanical response of the phases, which constitute the interface and could be helpful to control the brazing conditions avoiding undesirable brazeability problems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The Effect of Mo Particles Addition in Ag-Cu-Ti Filler Alloy on Ti(C,N)-Based Cermet/45 Steel-Brazed Joints

Reliable brazing of Ti(C,N)-based cermet and 45 steel was successfully achieved by using the Mo-particle-reinforced Ag-Cu-Ti composite filler. The effects of Mo content on the interfacial microstructure and mechanical properties of Ti(C,N)-based cermet/45 steel joints were analyzed. The results showed that the joint microstructure was primarily composed of Ni{sub 3}Ti+Cu{sub 3}Ti{sub 2}, Ag(s,s)+Cu(s.s), CuTi+Mo, Ti-based solid solution, and FeTi+Fe{sub 2}Ti. With the increase in Mo content in filler, the thickness of the Ni{sub 3}Ti+Cu{sub 3}Ti{sub 2} layer adjacent to the Ti(C,N)-based cermet decreases, while more blocky Ti-Cu intermetallic were observed in the brazing seam. The shear strength of the joint could be significantly improved by adding suitable amounts of Mo into the Ag-Cu-Ti filler, and the peak value of 263 MPa was achieved when the alloys were brazed with Ag-Cu-Ti+8wt.%Mo composite filler at 920 °C for 20 min.

36 MATERIALS SCIENCE↗