Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Temperature Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Wrought Aluminum-Cerium Alloys by Shear Assisted Processing and Extrusion

Al-Ce alloys have attracted recent interest because of their high thermal stability due to the very low solubility of Ce in the Al matrix. The Al 11 Ce 3 eutectic phase gives excellent strain hardening behavior and moderate high-temperature strength in the as-cast state. However, its strengthening effect is limited by its coarse as-cast structure. Therefore, alternative manufacturing methods such as additive manufacturing or equal channel angular pressing have been applied to refine the Al 11 Ce 3 phase to good effect. However, these techniques are both expensive and time-consuming. Therefore, this study aims to use Shear Assisted Processing and Extrusion (ShAPE), an emerging solid phase processing technique that is more easily scalable than the previously mentioned methods. ShAPE can produce useful cross-sections of an Al-8Ce-4Mg alloy while refining the Al 11 Ce 3 phase to produce a higher strength material. It was found that a low temperature ShAPE process can improve the room temperature yield strength by ~60% compared to a binary Al-4Mg alloy. Additionally, the high-temperature yield strength of the Al-Ce alloys increased by 20%, with a simultaneous 15% improvement in ductility compared to the binary Al-Mg alloy. These results highlight the potential for ShAPE as a processing technique for Al-Ce alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Neural Learning Based Blind Source Separation for Detection of Material Defects in Pulsed Thermography Images

In this paper, we introduce a neural learning-based approach to blind source separation for detection of material flaws in pulsed thermography (PT) images. This approach can be used to detect internal defects (pores) in metallic Additively Manufactured (AM) materials. Such defects occur in high-strength alloys produced with direct laser sintering AM method for nuclear energy applications. Pulsed thermal imaging system utilizes a high intensity flash lamp to rapidly heat surface of sample, a high sensitivity infrared camera to capture data of surface temperature variations. The data cube obtained with PT (stack of surface temperature images at different times) can be analyzed with image processing algorithms to detect material defects. Compared with conventional nondestructive evaluation (NDE) methods, such as digital radiography and ultrasonic testing, the PT pulsed infrared thermal detection technique has advantages of one-sided non-contact measurements, fast processing of large sample areas captured in one image. Detection of small material defects requires finding features in thermal images, which have signal contrast levels approaching sensitivity limit of IR camera. In this study, an optimized Neural Learning based Blind Source Separation (NLBSS) algorithm, including Principal Component Analysis (PCA), and Independent Component Analysis (ICA) is demonstrated to automatically extract principal temporal and spatial features of thermography frames to enhance flaw detection. By using the NLBSS algorithm, material internal defects can be automatically detected. Furthermore, this processing approach compensates for experimental thermal imaging artifacts, such as noise and uneven heating. By merging artificial intelligence with the photothermic, the NDE system detects internal calibrated defects of various sizes and depths in AM nuclear-grade metallic alloys.

Zhang, Xin↗
DOE OSTI2024

Consistent and reproducible computation of the glass transition temperature from molecular dynamics simulations

In many fields, from semiconductors for opto-electronic applications to ionic liquids (ILs) for separations, the glass transition temperature (Tg) of a material is a useful gauge for its potential use in practical settings. As a result, there is a great deal of interest in predicting Tg using molecular simulations. However, the uncertainty and variation in the trend shift method, a common approach in simulations to predict Tg, can be high. This is due to the need for human intervention in defining a fitting range for linear fits of density with temperature assumed for the liquid and glass phases across the simulated cooling. The definition of such fitting ranges then defines the estimate for the Tg as the intersection of linear fits. We eliminate this need for human intervention by leveraging the Shapiro–Wilk normality test and proposing an algorithm to define the fitting ranges and, consequently, Tg. Through this integration, we incorporate into our automated methodology that residuals must be normally distributed around zero for any fit, a requirement that must be met for any regression problem. Consequently, fitting ranges for realizing linear fits for each phase are statistically defined rather than visually inferred, obtaining an estimate for Tg without any human intervention. The method is also capable of finding multiple linear regimes across density vs temperature curves. We compare the predictions of our proposed method across multiple IL and semiconductor molecular dynamics simulation results from the literature and compare other proposed methods for automatically detecting Tg from density–temperature data. We believe that our proposed method would allow for more consistent predictions of Tg. We make this methodology available and open source through GitHub.

Chemistry↗
DOE OSTI2024

Exploring mounting solutions for cryogenically cooled thin crystal optics in high power density x-ray free electron lasers

This study investigates three mounting methods—clamping, soldering, and a hybrid clamping–soldering approach—for cryogenically cooled thin diamond crystals crucial to stable operation of X-ray Free Electron Laser (XFEL) systems. While clamping methods exhibit temperature resilience and flexibility, meticulous design is required to prevent stress-induced warping and reduce thermal contact area. Soldering methods offer reliable mechanical and thermal bonding but encounter challenges due to the coefficient of thermal expansion mismatch at cryogenic temperatures. The hybrid method, integrating clamping and soldering with strain relief cuts, effectively mitigates overall distortion caused by mounting and XFEL thermal loads. These findings offer a novel mounting solution for high-performance x-ray optics in XFEL research and applications, ensuring stability and optimal functionality in cryogenic conditions.

Instruments & Instrumentation↗
DOE OSTI2025

Ultrafast Photoflash Synthesis of High-Entropy Oxide Nanoparticles

High-entropy metal oxides (HEOs) have recently received growing attention for broad energy conversion and storage applications due to their tunable properties. HEOs typically involve the combination of multiple metal cations in a single oxide lattice, thus bringing distinctive structures, controllable elemental composition, and tunable functional properties. Many synthesis methods for HEOs have been reported, such as solid-state reactions and carbon thermal shock methods. These methods frequently are energy-intensive or require relatively expensive heating equipment. In this work, we report an ultrafast photoflash synthesis method for HEO nanoparticles on diverse substrates. The energy input is provided by a commercial Xe photoflash unit, which triggers exothermic reactions to convert metal salt precursors to HEO nanoparticles within tens of milliseconds. The formation of HEO nanoparticles is attributed to the ultrafast heating (∼106 K/s) and cooling (∼105 K/s) rates of the photoflash and overall high temperature (>1000 K) during the ultrafast synthesis process. When the synthesized CoNiFeCrMn oxide (HEO) is tested as an oxygen evolution reaction electrocatalyst, it shows similar activity to similar materials prepared by other methods. We believe this photoflash synthesis provides a simple method for many others to synthesize diverse HEOs and explore their properties and potential applications.

exothermic reaction synthesis↗
DOE OSTI2020

Reducing dielectric loss and enhancing electrical insulation for multilayer polymer films by nanoconfined ion transport under high poling electric fields

High temperature polar polymers have demonstrated potential for good thermal stability and high dielectric constant at the same time. However, polarization of contaminated impurity ions in polar polymers, even at the ppm level, can significantly increase the dielectric loss at high temperature and low frequencies. One effective strategy to mitigate this problem is to multilayer them with a high temperature nonpolar dielectric polymer to confine impurity ion transport at the nanometer scale. In this study, confined ion transport in high temperature polycarbonate (HTPC)/poly(vinylidene fluoride) (PVDF) multilayer films under high AC electric fields was studied using a direct analytical simulation method. Different from the ion transport under low fields, the ion diffusion model failed to describe the ion transport under high electric fields. An exponential ion distribution profile, which was observed for the DC poling situation, was employed to implement the direct analytical simulation. Confined impurity ion transport under high AC fields was quantitatively understood. As the AC field increased, the mobile ion concentration decreased whereas the diffusion coefficient increased. The decrease of mobile ion concentration was explained by the blockage of impurity ions by the HTPC layers. This knowledge helped in the determination of optimal conditions to polarize impurity ions from the PVDF layers into the HTPC layers. After cooling below the glass transition temperature of HTPC, polarized impurity ions were locked inside the HTPC layers. As a result, increased discharge efficiency and enhanced electrical insulation (i.e., increased dielectric breakdown strength) were achieved for the polarized multilayer films.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Data‐Driven Analysis of Amine‐Based Sorbents for CO 2 Removal from the Atmosphere

Available data on amine-based sorbents used for the direct air capture (DAC) process were gathered and analyzed to identify the correlations between various aspects of these sorbents and the operating conditions they are used in. It is demonstrated that a moderately high temperature (∼ 50 °C) can help with higher CO 2 capture capacity. Furthermore, the effect of sorbent preparation method on its activity and stability was studied. Also, the influence of amine groups and support choice on amine efficiency and CO 2 capture capacity was discussed. The DAC process conditions proved to play a major role in determining the optimal sorbent. An outlook for characteristics to be sought for in future DAC sorbents for CO 2 removal is proposed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Comparison of greenhouse gas emission estimates from six hydropower reservoirs using modeling versus field surveys

As with most aquatic ecosystems, reservoirs play an important role in the global carbon (C) cycle and emit greenhouse gases (GHG) as carbon dioxide (CO 2 ) and methane (CH 4 ). However, GHG emissions from reservoirs are poorly quantified, especially in temperate systems, resulting in high uncertainty. We compared reservoir C emission estimates and uncertainty of diffusive, ebullitive, and degassing pathways in six hydropower reservoirs in the southeastern United States among four data sources: two field-based surveys and two models (including the GHG Reservoir “G-res” Tool). We found that CH 4 diffusion was most similar across data sources (modeled minus observed, bias = - 21 g CO 2-eq m -2 y -1 ) and had low relative uncertainty (coefficient of variation, CV = 0.98). On the other hand, CO 2 diffusion was least consistent across data sources (bias = - 518 g CO 2-eq m -2 y -1 ). Both field surveys indicated strong negative CO 2 diffusion (i.e., CO 2 uptake) at all reservoirs, while G-res estimated positive CO 2 diffusion. By extension, total C emissions showed similar discrepancies, leading to high uncertainty in upscaling and interpreting reservoir source-sink dynamics. Finally, CH 4 ebullition had the highest relative uncertainty (CV = 2.77) due to high variability across sites. We discuss limitations of field surveys and these models, including temperature-based annualization methods, varying definitions of ebullition zones, low sampling resolution, and lack of dynamism. Future field efforts focused on capturing variability in CO 2 diffusion and CH 4 ebullition will be especially valuable in reducing uncertainty and improving models to advance our understanding reservoir GHG emissions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Enhancing biomass flowability for entrained flow Gasification: The role of densification and torrefaction

Gasification presents a key strategy in addressing future energy demands while minimizing environmental impact. This has been recognized as a promising method to convert biomass to higher value products such as biofuels or hydrogen. Among gasification technologies, high-temperature and high-pressure reactors, particularly the R-GAS® system, emerge as an advanced option boasting superior conversion efficiency. However, akin to conventional high-temperature and high-pressure gasifiers, R-GAS® necessitates small particle sizes for optimal carbon conversion, a requirement yet to be fully explored for biomass. Hence, this study investigated the effectiveness of combined mechanical and thermal preprocessing techniques in modifying the physicochemical properties of biomass to suit gasification systems. Mechanical techniques including densification and pulverization, alongside thermal techniques such as torrefaction and steam explosion, were examined. The results demonstrate that torrefaction fosters producing of uniform granular material, enhancing flowability and reducing energy requirements for pulverization compared to steam explosion. Notably, torrefied corn stover exhibited lower internal friction angles and effective cohesion (40.09 ± 0.22° and 0.56 ± 0.01 kPa, respectively) compared to steam exploded corn stover (41.87 ± 0.65° and 0.83 ± 0.06 kPa, respectively), indicative of improved flowability. Additionally, pulverization of torrefied corn stover required approximately 16 % less energy than steam exploded corn stover and 91 % less energy than raw corn stover. Furthermore, the torrefaction-induced alterations in particle size, shape, and packing densities emphasize its potential to optimize flow and handling processes for gasification. These findings underline that densification followed by torrefaction effectively addresses biomass variability, leading to more efficient and sustainable energy conversion.

09 - BIOMASS FUELS↗
DOE OSTI2021

Flame aerosol synthesis of hollow alumina nanoshells for application in thermal insulation

Commercial implementation of hollow nanoshell materials is often limited by difficult scale-up and high cost. Here we present a scalable, continuous, and potentially low-cost route to hollow nanostructured materials using a High Temperature Reducing Jet flame aerosol reactor. The key advantage of this process over traditional flame aerosol synthesis methods is separation of flame chemistry and particle formation, which allows production of hollow nanoshells from an aqueous salt solution without any template or surfactant. We produced amorphous hollow alumina with an average diameter of 181 nm and shell thickness below 10 nm, and demonstrated the generality of the method by also producing hollow SiO 2 , ZrO 2 , Ga 2 O 3 , and Co 2 O 3 . We characterized the morphology, phase transition, thermal stability, and thermal conductivity of the flame-made hollow alumina by electron microscopy, x-ray diffraction, and thermal analysis methods. As a prototypical application, we incorporated hollow alumina into thermal insulation, combining it with common fiberglass insulation to reduce the thermal conductivity by 30% relative to pure fiberglass, to 0.028 W m -1 K -1 while maintaining robust fire-resistance and elasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Anomalously high elastic modulus of a poly(ethylene oxide)-based composite electrolyte

The practical use of lithium metal anodes in solid-state batteries requires a polymer membrane with high lithium-ion conductivity, thermal/electrochemical stability, and mechanical strength. The primary challenge is to effectively decouple the ionic conductivity and mechanical strength of the polymer electrolytes. We report a remarkably facile single step synthetic strategy based on in-situ crosslinking of poly(ethylene oxide) (xPEO) in the presence of a woven glass fiber (GF). Such a simple method yields composite polymer electrolytes (CPE) of anomalously high elastic modulus up to 2.5 GPa over a broad temperature range (20 °C – 245 °C) that has never been previously documented. An unsupervised machine learning algorithm, K-mean clustering analysis, was implemented on the hyperspectral Raman mapping at the xPEO/GF interface. Using such a unique means, we show for the first time that the promoted mechanical strength originates from xPEO and GF interactions through dynamic hydrogen and ionic bonding. High ionic conductivity is achieved by the addition plasticizer (e.g. tetraglyme), where trifluoromethanesulfonate anions are tethered to the xPEO matrix and Li + cations are favorably transported through coordination with the plasticizer. Further, stringent galvanostatic cycling tests indicates the CPE can be stably cycled for >3000 h in a Li-metal symmetric cell at a moderate temperature (nearly 1500 Coulombs/cm 2 Li equivalents), outperforming most of the PEO-based electrolytes. The GF reinforced CPE reported here has multifunctional uses, such as solid electrolytes for all solid-state batteries and membranes for redox-flow batteries. Although the focus of this study is on lithium-based batteries, the results are equally promising for other alkali metal based batteries such as sodium and potassium.

25 ENERGY STORAGE↗
DOE OSTI2023

Bridging microscale to macroscale mechanical property measurements of FeCrAl alloys by crystal plasticity modeling

FeCrAl alloys are candidates for accident tolerant fuel cladding of light water reactors. In this work, a microstructure- and temperature-dependent crystal plasticity model is employed to bridge microscale to macroscale mechanical property measurements of FeCrAl alloys. With the visco-plastic self-consistent (VPSC) polycrystal plasticity framework, a mechanism-based single crystal plasticity (MSCP) model adopts the Arrhenius type rate equation to describe the dependence of the critical resolved shear stress for dislocation slips on their temperature-dependent intrinsic frictional resistance and the microstructure-dependent irradiation hardening. The intrinsic frictional resistance associated with {110}<111> and {112}<111> slip systems were measured by in-situ micromechanical testing on unirradiated/irradiated samples at 25-500 °C. The irradiation hardening is estimated by the Bacon-Kocks-Scattergood (BKS) model with density and size of radiation-induced defects measured from microstructural characterization. Several features associated with thermo-mechanical behavior of unirradiated/irradiated polycrystalline FeCrAl alloys are captured. High density of deformation-induced dislocations and radiation-induced defects results in obvious hardening at room temperature, which is weakened at high temperature, and facilitates damage evolution during deformation. Moreover, both high temperature and radiation-induced defects, which facilitate dislocation multiplication, trigger large hardening rate. Finally, the proposed method together with application of accelerator-based ion irradiation technique is a surrogate approach to simulate neutron damage, improving the efficiency associated with evaluation of mechanical properties of FeCrAl alloys exposed to temperature, stress and radiation conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A 2–4 keV multilayer mirrored channel for the NIF Dante system

During inertial confinement fusion experiments at the National Ignition Facility (NIF), a capsule filled with deuterium and tritium (DT) gas, surrounded by a DT ice layer and a high-density carbon ablator, is driven to the temperature and densities required to initiate fusion. In the indirect method, 2 MJ of NIF laser light heats the inside of a gold hohlraum to a radiation temperature of 300 eV; thermal x rays from the hohlraum interior couple to the capsule and create a central hotspot at tens of millions degrees Kelvin and a density of 100–200 g/cm3. During the laser interaction with the gold wall, m-band x rays are produced at ∼2.5 keV; these can penetrate into the capsule and preheat the ablator and DT fuel. Preheat can impact instability growth rates in the ablation front and at the fuel–ablator interface. Monitoring the hohlraum x-ray spectrum throughout the implosion is, therefore, critical; for this purpose, a Multilayer Mirror (MLM) with flat response in the 2–4 keV range has been installed in the NIF 37° Dante calorimeter. Precision engineering and x-ray calibration of components mean the channel will report 2–4 keV spectral power with an uncertainty of ±8.7%.

Rubery, M. S. (ORCID:0000000344152818)↗
DOE OSTI2025

Microstructure and 77K mechanical properties of electron beam welded Cu101- Inconel 625 joints

In developing large-scale next-generation superconducting radio frequency (SRF) linear accelerators using superconducting films on Cu, the design and development of dissimilar welding and joining metals, such as Cu to Inconel, stainless steel, and Nb, are essential. In this talk, we present the development of procedures for electron-beam welding of Cu¿Inconel 625 and evaluation of the microstructure and 77K mechanical properties of the weld and base material in the welded condition and heat treatments in the 750°C ¿950°C heat treatment range. The results will be presented in the context of developing joining techniques for low-temperature applications where high conductivity and strength, vacuum hygiene, and magnetic properties of the material need consideration. The methods presented here are being deployed to thin film SRF Cu cavities at Jefferson Lab. Acknowledgment: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear

Khanal, Bashu↗
DOE OSTI2021

Synthesis of N-type thermoelectric materials, including Mg--Sn--Ge materials, and methods for fabrication thereof

Discussed herein are systems and methods for fabrication of MgSnGe-based thermoelectric materials for applications from room temperature and near room temperature to high temperature applications. The TE materials may be fabricated by hand or ball milling a powder to a predetermined particle size and hot-pressing the milled powder to form a thermoelectric component with desired properties including a figure of merit (ZT) over a temperature range. The TE materials fabricated may be disposed in thermoelectric devices for varying applications.

Ren, Zhifeng↗
DOE OSTI2021

Rapid Laser Reactive Sintering of Garnet Li 6.1 La 3 Zr 2 Al 0.3 O 12 Solid-State Electrolyte

All solid-state lithium-ion batteries (ASSLIBs) have gained significant interest in recent years due to their wide range of applications, including mobile devices, electric vehicles, and grid storage. Garnet-type Li 7 La 3 Zr 2 O 12 (LLZO) solid-state electrolyte (SSE) continues to be a significant player in the fabrication of ASSLIBs with excellent ionic conductivity on the order of 10 -3 S•cm -1 with the integration of dopants and sintering aids to assist conductivity and structural evolution during the sintering procedure. Traditional sintering techniques, such as solid-state sintering (SSS), have been proven to yield desirable crystal structures. However, the low ionic conductivity results from inferior microstructure, and lithium loss is a significant challenge. Recently, a relatively novel sintering process called rapid laser reactive sintering (RLRS) has shown great potential for achieving fully dense solid oxide electrolytes with less surface element loss, resulted in high ionic conductivity. Here, we applied the same RLRS method to fabricate LLZO dense electrolyte with different amounts of aluminum dopants. We hope the rapid high-temperature sintering can densify the electrolyte and avoid the lithium loss for achieving high lithium-ion conductivity. In this work, we optimized multiple combinations of laser parameters (speed, power, and defocus distance), initial precursor composition, and controlled atmospheres to discover the optimal conditions for reaching the efficacious crystal structure, microstructure, and ionic conductivity.

25 ENERGY STORAGE↗
DOE OSTI2025

A Rapid, Sustainable, One‐step Mechanochemical Strategy for Synthesizing Gold Nanoparticle‐Doped Covalent Organic Frameworks

Doping gold nanoparticles within covalent organic frameworks (AuNPs@COFs) has garnered enormous momentum due to their unique properties and broad applications. Nevertheless, prevailing multi-step synthesis is plagued with low time efficiency, eco-unfriendliness, and tedious protocols. Herein, we introduce a rapid, sustainable, scalable, one-step mechanochemical strategy for synthesizing up to four AuNPs-doped COFs via steel ball milling within an hour under ambient conditions. This approach overcomes the synthetic barriers of conventional multi-step solution-based methods, such as extended reaction times (5 days), milligram scale, the use of toxic solvents, elevated temperatures, and reliance on external reducing agents. One exemplary AuNPs@COF (AuNPs@DMTP-TPB) exhibits high crystallinity, porosity, small AuNP size, and uniform dispersion (5.4±0.6 nm), surpassing its counterpart synthesized via multi-step solution-based methods (6.4±1.1 nm). Notably, the gram-scale synthesis of AuNPs@DMTP-TPB can be successfully achieved. Control experiments suggest that the in situ formation of AuNPs is attributed to the galvanic reduction of gold precursor by stainless steel apparatus. As a proof-of-concept catalytic application, AuNPs@DMTP-TPB demonstrates remarkable catalytic activity and recyclability for the aqueous reduction of 4-nitrophenol under ambient conditions. This study provides an environmentally benign and fast pathway to synthesize AuNPs@COFs via mechanochemistry for the first time, opening tremendous possibilities for heterogeneous catalysis and beyond.

Nailwal, Yogendra↗
DOE OSTI2021

Comparison of pyrometry and thermography for thermal analysis of thermite reactions

This article examines the thermal behavior of a laser ignited thermite composed of aluminum and bismuth trioxide. Temperature data were collected during the reaction using a four-color pyrometer and a high-speed color camera modified for thermography. The two diagnostics were arranged to collect data simultaneously, with similar fields of view and with similar data acquisition rates, so that the two techniques could be directly compared. Results show that at initial and final stages of the reaction, a lower signal-to-noise ratio affects the accuracy of the measured temperatures. Both diagnostics captured the same trends in transient thermal behavior, but the average temperatures measured with thermography were about 750 K higher than those from the pyrometer. This difference was attributed to the lower dynamic range of the thermography camera’s image sensor, which was unable to resolve cooler temperatures in the field of view as well as the photomultiplier tube sensors in the pyrometer. Overall, while the camera could not accurately capture the average temperature of a scene, its ability to capture peak temperatures and spatial data make it the preferred method for tracking thermal behavior in thermite reactions.

36 MATERIALS SCIENCE↗