Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flight Systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

AFTI/F-111 MAW flight control system and redundancy management description

The wing on the NASA F-111 transonic aircraft technology (TACT) airplane was modified to provide flexible leading and trailing edge flaps; this modified wing is known as the mission adaptive wing (MAW). A dual digital primary fly-by-wire flight control system was developed with analog backup reversion for redundancy. This report discusses the functions, design, and redundancy management of the flight control system for these flaps.

Larson, Richard R.↗
NASA NTRS1979

Modern digital flight control system design for VTOL aircraft

Methods for and results from the design and evaluation of a digital flight control system (DFCS) for a CH-47B helicopter are presented. The DFCS employed proportional-integral control logic to provide rapid, precise response to automatic or manual guidance commands while following conventional or spiral-descent approach paths. It contained altitude- and velocity-command modes, and it adapted to varying flight conditions through gain scheduling. Extensive use was made of linear systems analysis techniques. The DFCS was designed, using linear-optimal estimation and control theory, and the effects of gain scheduling are assessed by examination of closed-loop eigenvalues and time responses.

Broussard, J. R.↗
NASA NTRS2005

Autonomous Flight Safety System September 27, 2005, Aircraft Test

This report describes the first aircraft test of the Autonomous Flight Safety System (AFSS). The test was conducted on September 27, 2005, near Kennedy Space Center (KSC) using a privately-owned single-engine plane and evaluated the performance of several basic flight safety rules using real-time data onboard a moving aerial vehicle. This test follows the first road test of AFSS conducted in February 2005 at KSC. AFSS is a joint KSC and Wallops Flight Facility (WEF) project that is in its third phase of development. AFSS is an independent subsystem intended for use with Expendable Launch Vehicles that uses tracking data from redundant onboard sensors to autonomously make flight termination decisions using software-based rules implemented on redundant flight processors. The goals of this project are to increase capabilities by allowing launches from locations that do not have or cannot afford extensive ground-based range safety assets, to decrease range costs, and to decrease reaction time for special situations. The mission rules are configured for each operation by the responsible Range Safety authorities and can be loosely categorized in four major categories: Parameter Threshold Violations, Physical Boundary Violations present position and instantaneous impact point (TIP), Gate Rules static and dynamic, and a Green-Time Rule. Examples of each of these rules were evaluated during this aircraft test.

Simpson, James C.↗
NASA NTRS2021

FRESCO: A Framework for Spacecraft Systems Autonomy

Achieving the science exploration and defense goals of the following decades will require flight systems capable of operations with limited operator contact, system mode changes and retasking based on sensor data, and complex robotic operations. To support these capabilities, increasingly autonomous flight systems are required that can perform dedicated mission functions, e.g. payload targeting and communications, and system-level functions, e.g. planning and goal monitoring. Architecting an autonomous system requires a well-reasoned, self-consistent framework to avoid \textit{ad hoc} design choices that will introduce complexity and risk. The Framework for Robust Execution and Scheduling of Commands On-Board, FRESCO, is the result of lessons learned in developing a software architecture to enable autonomous solar system exploration. FRESCO generalizes this work to offer a modular, software-agnostic approach to developing verifiable architecture for autonomous space systems. FRESCO specifies guiding principles, functions, interfaces, and interactions from which mission-specific autonomous control architectures can be derived. FRESCO is a principled framework relying on explicit, state-based goal definitions, centralized management of state knowledge, clearly separated control boundaries, and hierarchical reasoning. Using components from FRESCO reference architecture, an autonomous decision-making architecture can be designed for spacecraft which can then be mapped to flight software architecture. FRESCO is flexibly defined to enable autonomous control of flight systems built using extensive software and hardware heritage. Finally, FRESCO-derived architectures support a spectrum of operator/spacecraft interactions, ranging from traditional commanding to goal-driven commanding with the ability to change mission goals autonomously. FRESCO has been used in defining the autonomy architectures for the ASTERIA mission and have been demonstrated in laboratory and software simulation for small body rendezvous and in-space servicing missions.

Kolcio, Ksenia↗
NASA NTRS1992

Developing Software For A Flight-Control System

Improved process for development of flight-control software devised by integrating conventional software-development process with conventional control-system-analysis process. Reduces costs of development, eliminates need for reengineering, and almost eliminates production errors. Concept applicable to design of other control systems and of complicated hardware-and-software systems in general.

Murray, Jonathan↗
NASA NTRS1995

Panoramic, large-screen, 3-D flight display system design

The report documents and summarizes the results of the required evaluations specified in the SOW and the design specifications for the selected display system hardware. Also included are the proposed development plan and schedule as well as the estimated rough order of magnitude (ROM) cost to design, fabricate, and demonstrate a flyable prototype research flight display system. The thrust of the effort was development of a complete understanding of the user/system requirements for a panoramic, collimated, 3-D flyable avionic display system and the translation of the requirements into an acceptable system design for fabrication and demonstration of a prototype display in the early 1997 time frame. Eleven display system design concepts were presented to NASA LaRC during the program, one of which was down-selected to a preferred display system concept. A set of preliminary display requirements was formulated. The state of the art in image source technology, 3-D methods, collimation methods, and interaction methods for a panoramic, 3-D flight display system were reviewed in depth and evaluated. Display technology improvements and risk reductions associated with maturity of the technologies for the preferred display system design concept were identified.

Franklin, Henry↗
NASA NTRS1973

Flight control systems research

Theoretical development is reported for the parameter optimization design technique needed for digital flight control system design. The results of an example case study applying the optimization technique for continuous systems to an F-8 aircraft feedback control system are presented. The concept of evolving the simplest system configuration that is capable of meeting a specified set of performance requirements is illustrated in this work.

Whitaker, H. P.↗
NASA NTRS1985

Development of a sensitivity analysis technique for multiloop flight control systems

This report presents the development and application of a sensitivity analysis technique for multiloop flight control systems. This analysis yields very useful information on the sensitivity of the relative-stability criteria of the control system, with variations or uncertainties in the system and controller elements. The sensitivity analysis technique developed is based on the computation of the singular values and singular-value gradients of a feedback-control system. The method is applicable to single-input/single-output as well as multiloop continuous-control systems. Application to sampled-data systems is also explored. The sensitivity analysis technique was applied to a continuous yaw/roll damper stability augmentation system of a typical business jet, and the results show that the analysis is very useful in determining the system elements which have the largest effect on the relative stability of the closed-loop system. As a secondary product of the research reported here, the relative stability criteria based on the concept of singular values were explored.

Vaillard, A. H.↗
NASA NTRS1988

Quadruplex digital flight control system assessment

Described are the development and validation of a double fail-operational digital flight control system architecture for critical pitch axis functions. Architectural tradeoffs are assessed, system simulator modifications are described, and demonstration testing results are critiqued. Assessment tools and their application are also illustrated. Ultimately, the vital role of system simulation, tailored to digital mechanization attributes, is shown to be essential to validating the airworthiness of full-time critical functions such as augmented fly-by-wire systems for relaxed static stability airplanes.

Mulcare, D. B.↗
NASA NTRS1998

Flight Guidance System Validation Using SPIN

To verify the requirements for the mode control logic of a Flight Guidance System (FGS) we applied SPIN, a widely used software package that supports the formal verification of distributed systems. These requirements, collectively called the FGS specification, were developed at Rockwell Avionics & Communications and expressed in terms of the Consortium Requirements Engineering (CoRE) method. The properties to be verified are the invariants formulated in the FGS specification, along with the standard properties of consistency and completeness. The project had two stages. First, the FGS specification and the properties to be verified were reformulated in PROMELA, the input language of SPIN. This involved a semantics issue, as some constructs of the FGS specification do not have well-defined semantics in CoRE. Then we attempted to verify the requirements' properties using the automatic model checking facilities of SPIN. Due to the large size of the state space of the FGS specification an exhaustive state space analysis with SPIN turned out to be impossible. So we used the supertrace model checking procedure of SPIN that provides for a partial analysis of the state space. During this process, we found some subtle errors in the FGS specification.

Naydich, Dimitri↗
NASA NTRS1975

Space Shuttle flight control system

The Space Shuttle is a control stabilized vehicle with control provided by an all digital, fly-by-wire flight control system. This paper gives a description of the several modes of flight control which correspond to the Shuttle mission phases. These modes are ascent flight control (including open loop first stage steering, the use of four computers operating in parallel and inertial guidance sensors), on-orbit flight control (with a discussion of reaction control, phase plane switching logic, jet selection logic, state estimator logic and OMS thrust vector control), entry flight control and TAEM (terminal area energy management to landing). Also discussed are redundancy management and backup flight control.

Klinar, W. J.↗
NASA NTRS1977

Independent Evaluation of Shuttle Flight Control System

A brief summary of the work performed on the Approach and Landing Test (ALT) shuttle flight control system is presented. (FCS) and a bibliography of the formal reports are included which document the activities in detail. In general, the activities were grouped in four categories: (1) independent evaluation of ALT FCS software design; (2) independent evaluation of Software Development Laboratory (SDL) testing of ALT FCS software; (3) independent evaluation of Shuttle Avionics Integration Laboratory (SAIL) ALT FCS testing; and (4) independent evaluation of ALT flight test results.

Lee, R.↗
NASA NTRS1982

Data acquisition/reduction system for flight testing general aviation aircraft

The development of a data acquisition/reduction system for use in the flight testing of general aviation aircraft is described. Design objectives for the system are adequate accuracy, ease of installation and removal from aircraft, simplicity of operation, and low cost. A 16-channel working system has been constructed, and tested in the collection of flight test data from a Cessna 172 aircraft, which uses as the basis of its design an AIM65 microcomputer. Data is reduced with a MINC minicomputer system. Attention is given to the onboard installation of computer, battery and transducer modules incorporated by the system.

Rummer, D. I.↗
NASA NTRS1988

The helmet-mounted visual system in flight simulation

An account is given of the application of fiber-optic helmet-mounted display systems to flight simulation tasks for complex combat mission scenarios involving numerous external aircraft, audible communications, and various types of threats. Such helmets, which although custom-made for each pilot are far less expensive than image-projection systems, consist of two 3-in. diameter 'optical pancake windows' mounted in front of the pilot's eyes to which images are transferred through fiber-optic cables from four high-brightness light-valve projectors. Head-position information is provided by an optical tracking system. The pancake window displays are semitransparent and allow cockpit controls and displays to be viewed normally.

Cook, Anthony M.↗
NASA NTRS2010

Development of a Human Motor Model for the Evaluation of an Integrated Alerting and Notification Flight Deck System

A human motor model was developed on the basis of performance data that was collected in a flight simulator. The motor model is under consideration as one component of a virtual pilot model for the evaluation of NextGen crew alerting and notification systems in flight decks. This model may be used in a digital Monte Carlo simulation to compare flight deck layout design alternatives. The virtual pilot model is being developed as part of a NASA project to evaluate multiple crews alerting and notification flight deck configurations. Model parameters were derived from empirical distributions of pilot data collected in a flight simulator experiment. The goal of this model is to simulate pilot motor performance in the approach-to-landing task. The unique challenges associated with modeling the complex dynamics of humans interacting with the cockpit environment are discussed, along with the current state and future direction of the model.

Daiker, Ron↗
NASA NTRS1978

Simulation of distributed microprocessor-based flight control systems

The aim of the present paper is to demonstrate, within the framework of a digital flight control system, the method of simulating the information exchange between a microcomputer and a supervisory computer, and between microcomputers working on separate control tasks. A gradient technique is described that considers the trade-off between the objectives of the control system and the information exchange requirements.

Lee, P. S.↗
NASA NTRS1982

A digital flight control system verification laboratory

A NASA/FAA program has been established for the verification and validation of digital flight control systems (DFCS), with the primary objective being the development and analysis of automated verification tools. In order to enhance the capabilities, effectiveness, and ease of using the test environment, software verification tools can be applied. Tool design includes a static analyzer, an assertion generator, a symbolic executor, a dynamic analysis instrument, and an automated documentation generator. Static and dynamic tools are integrated with error detection capabilities, resulting in a facility which analyzes a representative testbed of DFCS software. Future investigations will ensue particularly in the areas of increase in the number of software test tools, and a cost effectiveness assessment.

De Feo, P.↗