Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FRAGMENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
NASA NTRS1996

Non-random distribution of DNA double-strand breaks induced by particle irradiation

Induction of DNA double-strand breaks (dsbs) in mammalian cells is dependent on the spatial distribution of energy deposition from the ionizing radiation. For high LET particle radiations the primary ionization sites occur in a correlated manner along the track of the particles, while for X-rays these sites are much more randomly distributed throughout the volume of the cell. It can therefore be expected that the distribution of dsbs linearly along the DNA molecule also varies with the type of radiation and the ionization density. Using pulsed-field gel and conventional gel techniques, we measured the size distribution of DNA molecules from irradiated human fibroblasts in the total range of 0.1 kbp-10 Mbp for X-rays and high LET particles (N ions, 97 keV/microns and Fe ions, 150 keV/microns). On a mega base pair scale we applied conventional pulsed-field gel electrophoresis techniques such as measurement of the fraction of DNA released from the well (FAR) and measurement of breakage within a specific NotI restriction fragment (hybridization assay). The induction rate for widely spaced breaks was found to decrease with LET. However, when the entire distribution of radiation-induced fragments was analysed, we detected an excess of fragments with sizes below about 200 kbp for the particles compared with X-irradiation. X-rays are thus more effective than high LET radiations in producing large DNA fragments but less effective in the production of smaller fragments. We determined the total induction rate of dsbs for the three radiations based on a quantitative analysis of all the measured radiation-induced fragments and found that the high LET particles were more efficient than X-rays at inducing dsbs, indicating an increasing total efficiency with LET. Conventional assays that are based only on the measurement of large fragments are therefore misleading when determining total dsb induction rates of high LET particles. The possible biological significance of this non-randomness for dsb induction is discussed.

NASA Discipline Radiation Health↗
NASA NTRS2010

Analysis of a Hypergolic Propellant Explosion During Processing of Launch Vehicles in the VAB

NASA is developing launch vehicles to support missions to Low Earth Orbit (LEO), the moon and deep space. Whether manned or unmanned, the vehicle components will likely be integrated in the Vehicle Assembly Building (VAB) at Kennedy Space Center (KSC) and typically include a fueled spacecraft (SC) that sits on top of one or more stages. The processing of a fueled SC involves hazardous operations when it is brought into the VAB Transfer Aisle and lifted a significant height for mating with lower stages. Accidents resulting from these hazardous operations could impact unrelated personnel working in buildings adjacent to the VAB. Safe separation distances based on the DOD Explosives Standards Quantity-Distance (Q-D) approach result in large IBD arcs. This paper presents site-specific air blast and fragmentation hazard analyses for comparison with the Q-D arcs as well as consequence and risk analyses to provide added information for the decision maker. A new physics-based fragmentation model is presented that includes: a) the development of a primary fragment list (which defines the fragment characteristics) associated with a hypergolic propellant explosion, b) a description of a 3D fragment bounce model, c) the results of probabilistic Monte-Carlo simulations (that include uncertainties in the fragment characteristics) to determine: i) the hazardous fragment density distance, ii) the expected number of wall/roof impacts and penetrations to over 40 buildings adjacent to the VAB, and iii) the risk to building occupants.

Chrostowski, Jon D.↗
NASA NTRS2014

Solid Rocket Launch Vehicle Explosion Environments

Empirical explosion data from full scale solid rocket launch vehicle accidents and tests were collected from all available literature from the 1950s to the present. In general data included peak blast overpressure, blast impulse, fragment size, fragment speed, and fragment dispersion. Most propellants were 1.1 explosives but a few were 1.3. Oftentimes the data from a single accident was disjointed and/or missing key aspects. Despite this fact, once the data as a whole was digitized, categorized, and plotted clear trends appeared. Particular emphasis was placed on tests or accidents that would be applicable to scenarios from which a crew might need to escape. Therefore, such tests where a large quantity of high explosive was used to initiate the solid rocket explosion were differentiated. Also, high speed ground impacts or tests used to simulate such were also culled. It was found that the explosions from all accidents and applicable tests could be described using only the pressurized gas energy stored in the chamber at the time of failure. Additionally, fragmentation trends were produced. Only one accident mentioned the elusive "small" propellant fragments, but upon further analysis it was found that these were most likely produced as secondary fragments when larger primary fragments impacted the ground. Finally, a brief discussion of how this data is used in a new launch vehicle explosion model for improving crew/payload survival is presented.

Richardson, E. H.↗
NASA NTRS2017

Shape Effect Analysis of Aluminum Projectile Impact on Whipple Shields

The informed design with respect to hypervelocity collisions involving micrometeoroid and orbital debris (MMOD) is influential to the success of space missions. For an orbit comparable to that of the International Space Station, velocities for MMOD can range from 1 to 15 km/s, with an average velocity around 10 km/cu s. The high energy released during collisions at these speeds can result in damage to a spacecraft, or worst-case, loss of the spacecraft, thus outlining the importance of methods to predict the likelihood and extent of damage due to an impact. Through experimental testing and numerical simulations, substantial work has been conducted to better understand the effects of hypervelocity impacts (HVI) on spacecraft systems and shields; however, much of the work has been focused on spherical impacting particles. To improve environment models for the analysis of MMOD, a large-scale satellite break-up test was performed at the Arnold Engineering and Development Complex to better understand the varied impactor geometries that could be generated from a large impact. As a part of the post-experiment analysis, an undertaking to characterize the irregular fragments generated is currently being performed by the University of Florida under the management of NASA's Orbital Debris Program Office at Johnson Space Center (JSC). DebriSat was a representative, modern LEO satellite that was catastrophically broken up in a HVI test. The test chamber was lined with a soft-catch system of foam panels that captured the fragments after impact. Initial predictions put the number of fragments larger than 2mm generated from the HVI at roughly 85,000. The number of fragments thus far extracted from the foam panels has exceeded 100,000, with that number continuously increasing. The shapes of the fragments vary dependent upon the material. Carbon-fiber reinforced polymer pieces, for instance, are abundantly found as thin, flat slivers. The characterization of these fragments with respect to their mass, size, and material composition needs to be summarized in a form that can be used in MMOD analysis. The mechanism that brings these fragment traits into MMOD analysis is through ballistic limit equations (BLE) that have been developed largely for a few types of materials1. As a BLE provides the failure threshold for a shield or spacecraft component based on parameters such as the projectile impact velocity and size, and the target's materials, thickness, and configuration, it is used to design protective shields for spacecraft such as Whipple shields (WS) to an acceptable risk level. The majority of experiments and simulations to test shields and validate BLEs have, heretofore, largely used spheres as the impactor, not properly reflecting the irregular shapes of MMOD. This shortfall has motivated a numerical impact analysis study of HVI involving non-spherical geometries to identify key parameters that environment models should provide.

Carrasquilla, Maria J.↗
NASA NTRSDate not supplied

An Approach to Shape Parameterization Using Laboratory Hypervelocity Impact Experiments

NASA’s Orbital Debris Program Office relies on laboratory-based impact tests to supplement the measurement data of on-orbit events that defines the orbital debris environment. These experiments provide information that is essential to interpreting the radar and optical measurements of orbital fragmentation events into useful metrics, such as characteristic size of the debris, and to providing a better understanding of the distributions of fragment populations in terms of their masses, material constituents, fragment densities, cross-sectional areas, area-to-mass ratios, shapes, etc. The Satellite Orbital Debris Characterization Impact Test (SOCIT) was a notable laboratory impact experiment conducted in 1992 using a surplus U.S. Navy Transit navigation satellite of the 1960s. The data from this ground-based experiment were combined with on-orbit measurements to develop the NASA Standard Satellite Breakup Model (SSBM). To account for advancements in satellite design and construction since, a new impact test series – DebriSat – was conducted in 2014. This test utilized a high-fidelity mock-up spacecraft that better represents the materials and construction techniques used to design and manufacture modern spacecraft. Together, these tests offer valuable data to model an orbital debris environment composed of legacy and modern spacecraft. This paper presents an overview of the two laboratory impact tests, comparing their fragment parameter distributions with each other and with relevant distributions from the NASA SSBM. The categorization and descriptions of fragment shapes are of significant interest for future work, yet there are marked differences in the definitions of shape categories between each dataset. The categorizations of constituent materials, and the measurement techniques employed to populate these two datasets, are also different. New rubrics simplify and equate the categorizations between datasets to aid comparative analyses and to facilitate the potential use of both datasets in tandem with future environmental debris models. A preferred approach to classifying shape across disparate datasets uses the characteristic-length dimensions, and a simplified shape classification based on physical, solid-body dimensions, to mathematically construct an encapsulating right-circular cylinder that represents the fragment. The ratio of cylinder length-to-diameter (L:D) then provides a single continuum value for shape that is strongly correlated with its designated shape and size. This metric can then be used to further assess the distribution of shape with populations of other fragment characteristics within these datasets. The shape parameterization using the L:D ratios of right-circular cylinders is discussed.

John H. Seago↗
NASA NTRSDate not supplied

An Approach to Shape Parameterization Using Laboratory Hypervelocity Impact Experiments

NASA’s Orbital Debris Program Office relies on laboratory-based impact tests to supplement the measurement data of on-orbit events that defines the orbital debris environment. These experiments provide information that is essential to interpreting the radar and optical measurements of orbital fragmentation events into useful metrics, such as characteristic size of the debris, and to providing a better understanding of the distributions of fragment populations in terms of their masses, material constituents, fragment densities, cross-sectional areas, area-to-mass ratios, shapes, etc. The Satellite Orbital Debris Characterization Impact Test (SOCIT) was a notable laboratory impact experiment conducted in 1992 using a surplus U.S. Navy Transit navigation satellite of the 1960s. The data from this ground-based experiment were combined with on-orbit measurements to develop the NASA Standard Satellite Breakup Model (SSBM). To account for advancements in satellite design and construction since, a new impact test series – DebriSat – was conducted in 2014. This test utilized a high-fidelity mock-up spacecraft that better represents the materials and construction techniques used to design and manufacture modern spacecraft. Together, these tests offer valuable data to model an orbital debris environment composed of legacy and modern spacecraft. This paper presents an overview of the two laboratory impact tests, comparing their fragment parameter distributions with each other and with relevant distributions from the NASA SSBM. The categorization and descriptions of fragment shapes are of significant interest for future work, yet there are marked differences in the definitions of shape categories between each dataset. The categorizations of constituent materials, and the measurement techniques employed to populate these two datasets, are also different. New rubrics simplify and equate the categorizations between datasets to aid comparative analyses and to facilitate the potential use of both datasets in tandem with future environmental debris models. A preferred approach to classifying shape across disparate datasets uses the characteristic-length dimensions, and a simplified shape classification based on physical, solid-body dimensions, to mathematically construct an encapsulating right-circular cylinder that represents the fragment. The ratio of cylinder length-to-diameter (L:D) then provides a single continuum value for shape that is strongly correlated with its designated shape and size. This metric can then be used to further assess the distribution of shape with populations of other fragment characteristics within these datasets. The shape parameterization using the L:D ratios of right-circular cylinders is discussed.

John H Seago↗
NASA NTRS1975

Petrographic analysis of Apollo 16 samples 66083,1 and 67943,1

Sample 66083,1 was a 0.5 g sample of 2-4 mm fines from a clod of white impact ejecta. Petrography of 12 fragments of it reveals the following types of fragments: a breccia with a glassy matrix containing about 20-30% of crystal fragments, a fragment of partly devitrified glass, a fine-grained feldspar-rich rock containing plagioclase laths with about 10% of interstitial pyroxene and olivine, a breccia consisting of clasts of plagioclase and plagioclase-rich rock in a fine-grained microcrystalline feldspathic groundmass, a fragment of plagioclase clasts in a fine-grained groundmass of plagioclase and ferromagnesians with some opaques, and a crystalline rock made of subequal amounts of plagioclase and ferromagnesians with some opaque material. For sample 67943,1, all but two fragments could be classed as brecciated anorthosites.

Mason, B.↗
NASA NTRS1977

Designing the L-1011 to minimize rotor failures effects

Design philosophies used in the L-1011 aircraft to provide protection against rotor fragments include: (1) incorporating into the rotor design features that tend to promote small fragments if failure occurs; (2) containing the fragments within the engine shell or greatly reducing the energy content of those fragments that are eventually uncontained; (3) shielding vulnerable elements or systems with heavy structural members that tend to stop or deflect high velocity fragments; and (4) incorporating redundant and/or backup systems into the basic design and separating these systems so as to minimize the probability that more than one system will be damaged by an uncontained rotor fragment. Some of the design features that were incorporated into the Rolls-Royce RB211 engine are discussed, and two in-service experiences are considered in order to illustrate the practical operation of these features.

Wignot, J. E.↗
NASA NTRS1978

User's guide to computer programs JET 5A and CIVM-JET 5B to calculate the large elastic-plastic dynamically-induced deformations of multilayer partial and/or complete structural rings

These structural ring deflections lie essentially in one plane and, hence, are called two-dimensional (2-d). The structural rings may be complete or partial; the former may be regarded as representing a fragment containment ring while the latter may be viewed as a 2-d fragment-deflector structure. These two types of rings may be either free or supported in various ways (pinned-fixed, locally clamped, elastic-foundation supported, mounting-bracket supported, etc.). The initial geometry of each ring may be circular or arbitrarily curved; uniform-thickness or variable-thickness rings may be analyzed. Strain-hardening and strain-rate effects of initially-isotropic material are taken into account. An approximate analysis utilizing kinetic energy and momentum conservation relations is used to predict the after-impact velocities of each fragment and of the impact-affected region of the ring; this procedure is termed the collision-imparted velocity method (CIVM) and is used in the CIVM-JET 5 B program. This imparted-velocity information is used in conjunction with a finite-element structural response computation code to predict the transient, large-deflection, elastic-plastic responses of the ring. Similarly, the equations of motion of each fragment are solved in small steps in time. Provisions are made in the CIVM-JET 5B code to analyze structural ring response to impact attack by from 1 to 3 fragments, each with its own size, mass, translational velocity components, and rotational velocity. The effects of friction between each fragment and the impacted ring are included.

Wu, R. W. H.↗
NASA NTRS1980

Effects of atmospheric breakup on crater field formation

This paper investigates the physics of meteoroid breakup in the atmosphere and its implications for the observed features of strewn fields. There are several effects which cause dispersion of the meteoroid fragments: gravity, differential lift of the fragments, bow shock interaction just after breakup, centripetal separation by a rotating meteroid, and possibly a dynamical transverse separation resulting from the crushing deceleration in the atmosphere. Of these, it is shown that gravity alone can produce the common pattern in which the largest crater occurs at the downrange end of the scatter ellipse. The average lift-to-drag ratio of the tumbling fragments must be less than about 0.001, otherwise small fragments would produce small craters downrange of the main crater, and this is not generally observed. The cross-range dispersion is probably due to the combined effects of bow shock interaction, crushing deceleration, and possibly spinning of the meteoroid. A number of terrestrial strewn fields are discussed in the light of these ideas, which are formulated quantitatively for a range of meteoroid velocities, entry angles, and crushing strengths. It is found that when the crater size exceeds about 1 km, the separation between the fragments upon landing is a fraction of their own diameter, so that the crater formed by such a fragmented meteoroid is almost indistinguishable from that formed by a solid body of the same total mass and velocity.

Passey, Q. R.↗
NASA NTRS1982

The mechanisms of fine particle generation and electrification during Mount St. Helens volcanic eruption

Microscopical investigation of volcanic ash collected from ground stations during Mount St. Helens eruptions reveal a distinctive bimodel size distribution with high concentrations of particle ranges at (1) 200-100 microns and (2) 20-0.1 microns. Close examination of individual particles shows that most larger ones are solidified magma particles of porous pumice with numerous gas bubbles in the interior and the smaller ones are all glassy fragments without any detectable gas bubbles. Elemental analysis demonstrates that the fine fragments all have a composition similar to that of the larger pumice particles. Laboratory experiments suggest that the formation of the fine fragments is by bursting of glassy bubbles from a partially solidified surface of a crystallizing molten magma particle. The production of gas bubbles is due to the release of absorbed gases in molten magma particles when solubility decreases during phase transition. Diffusion cloud chamber experiments strongly indicate that sub-micron volcanic fragments are highly hygroscopic and extremely active as cloud condensation nuclei. Ice crystals also are evidently formed on those fragments in a supercooled (-20 C) cloud chamber. It has been reported that charge generation from ocean volcanic eruptions is due to contact of molten lava with sea water. This seems to be insufficient to explain the observed rapid and intense lightning activities over Mount St. Helens eruptions. Therefore, a hypothesis is presented here that highly electrically charged fine solid fragments are ejected by bursting of gas bubbles from the surface of a crystallizing molten magma particles.

Cheng, R. J.↗
NASA NTRS1993

Origins of the rings of Uranus and Neptune. II - Initial conditions and ring moon populations

Catastrophic fragmentation of the ring moons of Uranus and Neptune occurs in approximately 10 exp 8 years. The fate of the debris following a fragmenting impact is central to understanding the evolution of these satellites and the hypothesized origin of rings from their debris. In this paper the possible effects of the velocity distribution of fragments following a catastrophic fragmentation on satellite diminution via a collisional cascade is examined. Fragment velocities are critical in the evolution of the collisional cascade because of the possibility of reaccretion following disruption. The fragment velocity distribution is used to calculate the initial phase space distribution of the new ring particles. This provides a physically realistic initial condition for simulations of the collisional evolution of planetary rings.

Colwell, Joshua E.↗
NASA NTRS1996

Cometary Nuclei and Tidal Disruption: The Geologic Record of Crater Chains on Callisto and Ganymede

Prominent crater chains on Ganymede and Callisto are most likely the impact scars of comets tidally disrupted by Jupiter and are not secondary crater chains. We have examined the morphology of these chains in detail in order to place constraints on the properties of the comets that formed them and the disruption process. In these chains, intercrater spacing varies by no more than a factor of 2 and the craters within a given chain show almost no deviation from linearity (although the chains themselves are on gently curved small circles). All of these crater chains occur on or very near the Jupiter-facing hemisphere. For a given chain, the estimated masses of the fragments that formed each crater vary by no more than an order of magnitude. The mean fragment masses for all the chains vary by over four orders of magnitude (W. B. McKinnon and P. M. Schenk 1995, Geophys. Res. Lett. 13, 1829-1832), however. The mass of the parent comet for each crater chain is not correlated with the number of fragments produced during disruption but is correlated with the mean mass of the fragments produced in a given disruption event. Also, the larger fragments are located near the center of each chain. All of these characteristics are consistent with those predicted by disruption simulations based on the rubble pile cometary nucleus model (in which nuclei are composed on numerous small fragments weakly bound by self-gravity), and with those observed in Comet D/Shoemaker-Levy 9. Similar crater chains have not been found on the other icy satellites, but the impact record of disrupted comets on Callisto and Ganymede indicates that disruption events occur within the Jupiter system roughly once every 200 to 400 years.

Schenk, Paul M.↗
NASA NTRS1997

Breccia Formation at a Complex Impact Crater: Slate Islands, Lake Superior, Ontario, Canada

The Slate Islands impact structure is the eroded remnant of a approximately 30-32 km-diameter complex impact structure located in northern Lake Superior, Ontario, Canada. Target rocks are Archean supracrustal and igneous rocks and Proterozoic metavolcanics, metasediments, and diabase. A wide variety of breccias occurs on the islands, many of which contain fragments exhibiting shock metamorphic features. Aphanitic, narrow and inclusion-poor pseudotachylite veins, commonly with more or less parallel boundaries and apophyses branching off them, represent the earliest breccias formed during the compression stage of the impact process. Coarse-grained, polymictic elastic matrix breccias form small to very large, inclusion-rich dikes and irregularly shaped bodies that may contain altered glass fragments. These breccias have sharp contacts with their host rocks and include a wide range of fragment types some of which were transported over minimum distances of approximately 2 km away from the center of the structure. They cut across pseudotachylite veins and contain inclusions of them. Field and petrographic evidence indicate that these polymictic breccias formed predominantly during the excavation and central uplift stages of the impact process. Monomictic breccias, characterized by angular fragments and transitional contacts with their host rocks, occur in parautochthonous target rocks, mainly on the outlying islands of the Slate Islands archipelago. A few contain fragmented and disrupted, coarse-grained, polymictic clastic matrix breccia dikes. This is an indication that at least some of these monomictic breccias formed late in the impact process and that they are probably related to a late crater modification stage. A small number of relatively large occurrences of glass-poor, suevitic breccias occur at the flanks of the central uplift and along the inner flank of the outer ring of the Slate Islands complex crater. A coarse, glass-free, allogenic breccia, containing shatter-coned fragments derived from Proterozoic target rocks (upper target strata), observed at two locations may be analogous to the 'Bunt Breccia' of the Ries crater in Germany. At one of these locations this breccia lies close to a crater suevite deposit. At the other, it overlies parautochthonous, monomictic breccia. The State Islands impact breccias are superbly exposed, much better than breccias in most other terrestrial impact structures. Observations, including those indicative of multiple and and sequential processes, provide insight on how impact breccias form and how they relate to the various phases of the impact process. Eventually they will lead to an improved understanding of planetary impact processes.

Dressler, B. O.↗
NASA NTRS1997

Ultra Heavy Ion Collector (UHIC)

The purpose of this final report is to study the propagation of heavy nuclei in cosmic radiation. Topics include: Mass Distributions of Fragments from the Interactions of 600 MeV/n Silver Nuclei; Charge-pickup by Heavy Relativistic Nuclei; Fragmentation and Propagation Heavy UH Cosmic Ray Nuclei; Nuclear Fragmentation Parameters Needed for Interpretation of Observed Fluxes of UH Cosmic Ray Nuclei; Fragmentation and Electromagnetic Dissociation of 10.6 GeV/nucleon (197) Au Nuclei; Nuclear Interaction Cross Sections for UltraHeavy Nuclei; The Charge-Changing Fragmentation of 10.6 GeV/nucleon 197 Au Nuclei; Fragmentation Cross Sections of Relativistic 84/36 Kr and 109/47 Ag Nuclei in Targets from Hydrogen to Lead; Mission Concept for the Study of Ultraheavy Galactic Cosmic Rays; and Propagation of the Heaviest UH - Cosmic Ray Nuclei.

Stone, E. C.↗
NASA NTRS1994

The Disruption and Demise of Periodic Comet Shoemaker-Levy 9

The impact of the fragmented comet Shoemaker-Levy 9 (SL9) into Jupiter this July promises to change our understanding of the outer solar system. More than twenty mountain-sized conglomerates of ice and rock will hit the atmosphere at approx. 50 km/s over the course of a week beginning July 16, releasing approx. 10(exp 4) to 10(exp8) megatons of energy per burst, and providing unique and perhaps pivotal clues to the properties of comets and the physics of massive atmospheres. Because the fragments will strike the far side of Jupiter, data acquisition, analysis and interpretation will be quite sensitive to the actual size and energy of the fragments. We therefore examine an event which took place two summers ago, unnoticed and unobserved: the disruption of SL9 into a "string of pearls' as it passed within the Roche limit at perijove. We first demonstrate, on the basis of timescales of tidal interaction, that the comet could not have broken into 20+ fragments through a hierarchy of brittle fracture events. Next, noting that the tidal stress was too weak to have even fragmented an uncompressed mass of freshly fallen snow, we run models for a strengthless comet held together only by self-gravity. We explore the initial size, density, and rotation. We conclude that a 4 km diameter comet (smaller if a prograde rotator) of density approx. 0.5 g/cu cm disrupts and disperses into a chain of fragments similar to Shoemaker-Levy 9, whether we begin with 21, 85, 169, 700 or 2000 sub-grains. Gravitational reaccumulation is evidently the answer, and there is no need to invoke the presence of 21 "cometesimals" as the subscale of the comet. To explain how a comet can be weaker than uncompacted snow, we show that the ring-plane crossing prior to perijove could have caused total damage. Finally, we compute the tidal stress on impactors as they approach Jupiter this July. Objects of various density are moderately distorted but not disrupted by the time they strike the planet.

Asphaug, Erik↗
NASA NTRS2009

Cumulative Damage in Strength-Dominated Collisions of Rocky Asteroids: Rubble Piles and Brick Piles

Laboratory impact experiments were performed to investigate the conditions that produce large-scale damage in rock targets. Aluminum cylinders (6.3 mm diameter) impacted basalt cylinders (69 mm diameter) at speeds ranging from 0.7 to 2.0 km/s. Diagnostics included measurements of the largest fragment mass, velocities of the largest remnant and large fragments ejected from the periphery of the target, and X-ray computed tomography imaging to inspect some of the impacted targets for internal damage. Significant damage to the target occurred when the kinetic energy per unit target mass exceeded roughly 1/4 of the energy required for catastrophic shattering (where the target is reduced to one-half its original mass). Scaling laws based on a rate-dependent strength were developed that provide a basis for extrapolating the results to larger strength-dominated collisions. The threshold specific energy for widespread damage was found to scale with event size in the same manner as that for catastrophic shattering. Therefore, the factor of four difference between the two thresholds observed in the lab also applies to larger collisions. The scaling laws showed that for a sequence of collisions that are similar in that they produce the same ratio of largest fragment mass to original target mass, the fragment velocities decrease with increasing event size. As a result, rocky asteroids a couple hundred meters in diameter should retain their large ejecta fragments in a jumbled rubble-pile state. For somewhat larger bodies, the ejection velocities are sufficiently low that large fragments are essentially retained in place, possibly forming ordered "brick-pile" structures.

Housen, Kevin↗
NASA NTRS2010

An Analysis of Recent Major Breakups in he Low Earth Orbit Region

Of the 190 known satellite breakups between 1961 and 2006, only one generated more than 500 cataloged fragments. The event was the explosion of the Pegasus Hydrazine Auxiliary Propulsion System in 1996, adding 713 fragments to the U.S. Satellite Catalog. Since the beginning of 2007; however, the near-Earth environment has been subjected to several major breakups, including the Fengyun-1C anti-satellite test and the explosion of Briz-M in 2007, the unusual breakup of Cosmos 2421 in 2008, and the collision between Iridium 33 and Cosmos 2251 in 2009. Combined, these events added more than 5000 large (> or equal 10 cm) fragments to the environment. Detailed analysis of the radar cross section measurements and orbit histories of the fragments from these major events reveals several unusual characteristics in their size and area-to-mass ratio distributions. The characteristics could be related to the material composition of the parent vehicles, the nature of the breakup, and the composition and physical property of the fragments. In addition, the majority of these fragments are expected to remain in orbit for at least decades. Their long-term impact to the environment is analyzed using the NASA orbital debris evolutionary model, LEGEND. Descriptions of these analyses and a summary are included in this paper.

Liou, Jer-Chyi↗