Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FOSSIL FUELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Why the Earth has not warmed as much as expected?

The observed increase in global mean surface temperature (GMST) over the industrial era is less than 40% of that expected from observed increases in long-lived greenhouse gases together with the best-estimate equilibrium climate sensitivity given by the 2007 Assessment Report of the Intergovernmental Panel on Climate Change. Possible reasons for this warming discrepancy are systematically examined here. The warming discrepancy is found to be due mainly to some combination of two factors: the IPCC best estimate of climate sensitivity being too high and/or the greenhouse gas forcing being partially offset by forcing by increased concentrations of atmospheric aerosols; the increase in global heat content due to thermal disequilibrium accounts for less than 25% of the discrepancy, and cooling by natural temperature variation can account for only about 15%. Current uncertainty in climate sensitivity is shown to preclude determining the amount of future fossil fuel CO2 emissions that would be compatible with any chosen maximum allowable increase in GMST; even the sign of such allowable future emissions is unconstrained. Resolving this situation, by empirical determination of the earth's climate sensitivity from the historical record over the industrial period or through use of climate models whose accuracy is evaluted by their performance over this period, is shown to require substantial reduction in the uncertainty of aerosol forcing over this period.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Comparison of the greenhouse gas and criteria pollutant emissions from the SF-BREEZE high-speed fuel-cell ferry with a diesel ferry

A theoretical comparison is made of the “well to waves” (WTW) greenhouse gas (GHG) and criteria pollutant emissions from the SF-BREEZE high-speed hydrogen PEM fuel cell ferry and the VALLEJO ferry powered by traditional diesel engine technology but constrained to Tier 4 emissions standards. The emissions were calculated for a common maritime mission, the current ferry route between Vallejo CA and San Francisco CA. Calculations are made of the energy required for the SF-BREEZE and VALLEJO to perform the mission route profile. The SF-BREEZE requires 10.1% more fuel energy than the VALLEJO, primarily due to the SF-BREEZE being heavier. Estimates are made for the SF-BREEZE GHG emissions associated with five LH2 fuel production pathways including renewable and non-renewable (fossil-fuel based) methods. Estimates are also made for GHG emissions associated with fossil-diesel production and delivery as well as those for biodiesel, which can be considered a renewable “drop-in” fuel replacement for conventional diesel fuel. We find that the GHG emissions for the SF-BREEZE using non-renewable LH 2 are significantly higher than for the Tier 4 diesel-fueled VALLEJO on a per passenger basis. However, using renewable LH 2 , the GHG emissions for the SF-BREEZE ferry are reduced 75.8% compared to the diesel-fueled VALLEJO operating at Tier 4 emissions standards. We also compare the criteria pollutant emissions (NO x , HC, PM 10 ) for the SF-BREEZE to that of the VALLEJO held to Tier 4 emissions standards fueled by diesel fuel or biodiesel. Hydrogen PEM fuel cell technology dramatically reduces NO x and HC emissions below the most advanced Tier 4 criteria pollutant emissions requirements regardless of whether the LH 2 is made by NG reforming or via water electrolysis using 70% renewable energy. Renewable LH 2 made with greater than 84% renewable process energy is needed to also drop the SF-BREEZE PM 10 emissions below that of Tier 4 for high-speed fuel cell ferry transportation. Overall, the results show that operating a hydrogen fuel cell ferry on nearly 100% renewable hydrogen provides the dramatic reduction in GHG and criteria pollutant emissions commensurate with the problems of global climate change and maritime air pollution worldwide.

33 ADVANCED PROPULSION SYSTEMS↗

Growth Rates of Global Energy Systems and Future Outlooks

The world is interconnected and powered by a number of global energy systems using fossil, nuclear, or renewable energy. This study reviews historical time series of energy production and growth for various energy sources. It compiles a theoretical and empirical foundation for understanding the behaviour underlying global energy systems' growth. The most extreme growth rates are found in fossil fuels. The presence of scaling behaviour, i.e. proportionality between growth rate and size, is established. The findings are used to investigate the consistency of several long-range scenarios expecting rapid growth for future energy systems. The validity of such projections is questioned, based on past experience. Finally, it is found that even if new energy systems undergo a rapid 'oil boom'-development-i.e. they mimic the most extreme historical events-their contribution to global energy supply by 2050 will be marginal.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Retrofitting CO{sub 2} capture

Retrofitting existing fossil-fueled plants with the first available carbon dioxide capture technologies could play an important role in paving the way for development of lower-cost, reliable carbon capture and storage systems. EPRI research is helping utilities better understand the engineering challenges and economic consequences. Studies are being conducted on retrofitting five different plants with advanced amine PCC technologies. Other studies include: process optimization studies; valuing operating flexibility; CO{sub 2} capture for CTCC plants; and assessing the impact of climate policy on retrofitting investment.

01 COAL, LIGNITE, AND PEAT↗

10 MWE CDCL Large Pilot Plant – pre-FEED Study

Coal Direct Chemical Looping (CDCL) is an advanced oxy-combustion technology that has the potential to substantially reduce the energy penalty and the cost of electricity (COE) for coal-fired power generation with CO₂ capture. The Babcock & Wilcox Company (B&W) and The Ohio State University (OSU) have been collaborating on the development of an iron oxide oxygen-carrier based chemical looping technology for clean power generation with inherent carbon capture. In this process, coal is dried and pulverized prior to being transported into a moving-bed reducer. In the reducer, coal reacts with the oxygen-carrier particles, forming combustion byproducts, predominantly CO₂ and H₂O, while reducing the iron oxide oxidation state from Fe₂O₃ to a mixture of FeO and Fe. The reduced state particles are then transported to a combustor reactor and re-oxidized with air. Following the oxidation, the oxygen-carrier particles are regenerated, and a large amount of heat is released for steam production. The produced steam is sent to a turbine for electricity generation. Meanwhile, the CO₂–rich stream leaving the reducer is cooled, cleaned, and compressed for subsequent pipeline transportation and sequestration. By combining air separation and fuel conversion into a single system, the CDCL technology enables the intensification of oxy-combustion processes by eliminating the energy and cost intensive cryogenic air separation unit and thereby results in higher overall plant efficiencies and lower COE’s. The use of a moving-bed reducer results in high conversions of volatile hydrocarbons and high CO₂ purity, which reduces the cost of downstream CO₂ purification for sequestration or utilization. The Babcock & Wilcox Company in collaboration with The Ohio State University, Johnson & Matthey, The Electric Power Research Institute, and Dover Light & Power completed a Preliminary Front-End Engineering and Design (Pre-FEED) study of a 10 MWe coal-direct chemical looping (CDCL) pilot plant. The planned system is a modular 10 MWe CDCL large pilot facility consisting in 4 modules of 2.5 MWe each, working in parallel and to be hosted within the current structure at the City of Dover’s Municipal Power Plant. The CDCL system can achieve auto-thermal operation and includes a sub-critical steam cycle for power generation. The pilot system was designed to demonstrate full commercial operation at a reduced scale. The coal distribution per plan area is a representative slice of larger commercial arrangements. The system includes a CO₂ recycle system, but it does not include a compression system. The large pilot includes all the environmental control equipment and oxygen carrier and ash handling systems. As part of the project, the Team performed laboratory testing and carried out multiple pilot test campaigns to obtain design and performance information at the 250 kWth CDCL pilot facility at the Babcock & Wilcox Company’s Research Center. The Team demonstrated sustained operations at designed coal inputs, high coal conversion, high CO₂ purity, heat generation on the combustor, low carbon carryover between reactors and low particle attrition. Emissions generated in the reducer reactor were identified as SO₂ and NO x . The commercial manufacturing cost of oxygen carrier particle was evaluated by JM. A particle manufacturing report was generated and submitted to the DOE. Based on the results from the pilot tests and the pre-FEED design efforts, a techno-economic analysis was performed. The study shows that the CDCL process is a promising carbon-friendly technology capable of producing electricity with high efficiency. The estimated COE of the supercritical CDCL plant is $83.3 / MWh, which meets DOE’s target of less than 30% increase in COE when compared to a supercritical PC plant without CO₂ capture. This is the lowest among the existing carbon capture technologies (post-combustion and oxy-combustion) for fossil fuel power plant. CDCL is evaluated to be the most promising technology for carbon capture from the economic aspect.

01 COAL, LIGNITE, AND PEAT↗

How a Large-Scale Deployment of Grid-Forming Inverters May Impact Inter-Area Oscillation Modes: An Investigation in the US Western Interconnection

This report describes work performed to evaluate the impact of high grid-forming (GFM) inverter penetration on the inter-area oscillation mode characteristics of the Western Interconnection. Using simulations, this work analyzes how: a) replacing fossil-fuel-based synchronous generators by GFM inverters will impact properties of the North-South mode, and b) replacing the Colstrip power plant by grid-following (GFL) and GFM inverters will change the characteristics of the Montana mode. Results obtained indicate that high penetration of GFM inverters will significantly alter inter-area oscillation characteristics in interconnections. Low frequency oscillations in the 0.11 Hz range will be predominantly driven by remaining synchronous machines, and hence their relative distribution in the interconnection will impact mode characteristics and observability.

20 FOSSIL-FUELED POWER PLANTS↗

Role of Alternative Energy Sources: Natural Gas Technology Assessment [Slides]

This peer-reviewed analysis is one of a series of Technology Assessments of power production and evaluates the role of natural gas power in the future energy portfolio of the U.S. Natural gas power is evaluated with respect to resource base, growth potential, environmental profile, costs, barriers, risks, and expert opinions. Natural gas is seen as a cleaner burning and flexible alternative to other fossil fuels, and is used in residential, industrial, and transportation applications in addition to an expanding role in power production. New technologies have allowed increased domestic production of natural gas. The projected supply contributions afforded by new natural gas plays may keep the price of natural gas relatively low for the foreseeable future. Since natural gas is comprised mostly of methane, the control of fugitive emissions is imperative to reduce the greenhouse gas footprint of natural gas.

03 NATURAL GAS↗

Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies

This report presents an independent assessment of the cost and performance of select hydrogen production plants utilizing fossil fuel resources as the primary feedstocks – specifically, natural gas (NG), steam methane reforming (SMR), NG autothermal reforming (ATR), coal gasification, and coal/biomass co-gasification – using a systematic, transparent technical and economic approach. Study cases were selected to reflect the capabilities of current, commercial technologies within plant configurations, and at scales, representative of next commercial offerings facing no fundamental research and development (R&D) obstacles. Additionally, several areas of R&D are identified as potential pathways for performance improvements and cost reductions.

08 HYDROGEN↗

Japan's Long-term Energy Demand and Supply Scenario to 2050 - Estimation for the Potential of Massive CO2 Mitigation

In this analysis, the authors projected Japan's energy demand/supply and energy-related CO{sub 2} emissions to 2050. Their analysis of various scenarios indicated that Japan's CO{sub 2} emissions in 2050 could be potentially reduced by 26-58% from the current level (FY 2005). These results suggest that Japan could set a CO{sub 2} emission reduction target for 2050 at between 30% and 60%. In order to reduce CO{sub 2} emissions by 60% in 2050 from the present level, Japan will have to strongly promote energy conservation at the same pace as an annual rate of 1.9% after the oil crises (to cut primary energy demand per GDP (TPES/GDP) in 2050 by 60% from 2005) and expand the share of non-fossil energy sources in total primary energy supply in 2050 to 50% (to reduce CO{sub 2} emissions per primary energy demand (CO{sub 2}/TPES) in 2050 by 40% from 2005). Concerning power generation mix in 2050, nuclear power will account for 60%, solar and other renewable energy sources for 20%, hydro power for 10% and fossil-fired generation for 10%, indicating substantial shift away from fossil fuel in electric power supply. Among the mitigation measures in the case of reducing CO{sub 2} emissions by 60% in 2050, energy conservation will make the greatest contribution to the emission reduction, being followed by solar power, nuclear power and other renewable energy sources. In order to realize this massive CO{sub 2} abatement, however, Japan will have to overcome technological and economic challenges including the large-scale deployment of nuclear power and renewable technologies.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

A Nuclear Renaissance: The Role of Nuclear Power in Mitigating Climate Change

The U. N. Framework Convention on Climate Change calls for the stabilization of greenhouse gas (GHG) emissions at double the preindustrial atmospheric carbon dioxide concentration to avoid dangerous anthropogenic interference with the climate system. To achieve this goal, carbon emissions in 2050 must not exceed their current level, despite predictions of a dramatic increase in global electricity demand. The need to reduce GHG emissions and simultaneously provide for additional electricity demand has led to a renewed interest in the expansion of alternatives to fossil fuels--particularly renewable energy and nuclear power. As renewable energy sources are often constrained by the intermittency of natural energy forms, scale-ability concerns, cost and environmental barriers, many governments and even prominent environmentalist turn to nuclear energy as a source of clean, reliable base-load electricity. Described by some as a ''nuclear renaissance'', this trend of embracing nuclear power as a tool to mitigate climate change will dramatically influence the feasibility of emerging nuclear programs around the world.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Photocatalytic reduction of CO2 using CdS nanorods on porous anodic alumina support

Highlights: • Commercial grade quality of aluminum foil was used to fabricate uniformly ordered PAA. • A more compassionate method of SILAR was adopted for synthesis on CdS on PAA. • Photocatalytic reduction of CO{sub 2} was carried on flat sheet reactor with mirror reflectors, which proves to be a potential candidate for large scale application. • Enhanced photocatalytic reduction of CO{sub 2} was obtained, when CdS was retained along the pore wall of the support. - Abstract: Solar reduction of CO{sub 2} to valuable chemicals has captured attention of several researchers due to its cumulative effect on reduction of global warming and also as an alternative to fossil fuels. Hexagonally ordered porous anodic alumina (PAA), prepared from commercial aluminium foil, was used as a support for CdS photocatalyst due to its unique honeycomb structure. The CdS nanorods were vertically grown on the PAA template by successive ion layer adsorption reaction (SILAR) method. The photocatalytic reduction of CO{sub 2} by CdS to CH{sub 3}OH was investigated using a flat sheet reactor under 10 W LED lamp. A peak CH{sub 3}OH formation at 144.5 μmol/g/h with 45.4% of photocatalytic efficiency and 1.97% of CO{sub 2} conversion efficiency in a single pass were obtained.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

IRA Energy Community Data Layers

Data, geospatial data resources, and the linked mapping tool and web services reflect data for two types of potentially qualifying energy communities: 1) Census tracts and directly adjoining tracts that have had coal mine closures since 1999 or coal-fired electric generating unit retirements since 2009. These census tracts qualify as energy communities. 2) Metropolitan statistical areas (MSAs) and non-metropolitan statistical areas (non-MSAs) that are energy communities for 2023 and 2024, along with their fossil fuel employment (FFE) status. Additional information on energy communities and related tax credits can be accessed on the Interagency Working Group on Coal & Power Plant Communities & Economic Revitalization Energy Communities website (https://energycommunities.gov/energy-community-tax-credit-bonus/). Use limitations: these spatial data and mapping tool may not be relied upon by taxpayers to substantiate a tax return position or for determining whether certain penalties apply and will not be used by the IRS for examination purposes. The mapping tool does not reflect the application of the law to a specific taxpayer’s situation, and the applicable Internal Revenue Code provisions ultimately control.

Census Tract↗

Nuclear Hybrid Energy Systems: Challenges and Opportunities

With growing demand of energy and costs of the fossil fuels, coupled with the environmental concerns have resulted in an increased interest in alternative energy sources. Nuclear hybrid energy systems (NHES) are being considered which incorporates renewable energy sources such as solar and wind energy combined with nuclear reactor and energy storage to meet the peak hours demand imposed on the grid, along with providing process heat for other potential industrial applications. This concept could potentially satisfy various energy demands and improve reliability, robustness and resilience for the entire system as a whole, along with economic and net efficiency gains. This paper provides a brief understanding of potential NHES system and architecture along with the challenges

42 ENGINEERING↗

Aerosol, Cloud, and Climate: From Observation to Model (457th Brookhaven Lecture)

In the last 100 years, the Earth has warmed by about 1°F, glaciers and sea ice have been melting more quickly than previously, especially during the past decade, and the level of the sea has risen about 6-8 inches worldwide. Scientists have long been investigating this phenomenon of “global warming,” which is believed to be at least partly due to the increased carbon dioxide (CO 2 ) concentration in the air from burning fossil fuels. Funded by DOE, teams of researchers from BNL and other national labs have been gathering data in the U.S. and internationally to build computer models of climate and weather to help in understanding general patterns, causes, and perhaps, solutions. Among many findings, researchers observed that atmospheric aerosols, minute particles in the atmosphere, can significantly affect global energy balance and climate. Directly, aerosols scatter and absorb sunlight. Indirectly, increased aerosol concentration can lead to smaller cloud droplets, changing clouds in ways that tend to cool global climate and potentially mask overall warming from man-made CO 2 .

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Life Cycle Analysis of Natural Gas Extraction and Power Generation

Natural gas is considered a cleaner burning and more flexible alternative to other fossil fuels today. It is used in residential, commercial, industrial, and transportation applications in addition to having an expanding role in power production. However, the primary component of natural gas is methane, which is also a powerful greenhouse gas (GHG). Methane losses from natural gas extraction vary geographically and by extraction technology. This analysis inventories the GHG emissions from extraction, processing, and transmission of natural gas to large end users, and the combustion of that natural gas to produce electricity. In addition to GHG emissions, this analysis inventories other air emissions, water quality, water use, land use, and resource energy metrics.

03 NATURAL GAS↗

Energy recovery from waste incineration: Assessing the importance of district heating networks

Municipal solid waste incineration contributes with 20% of the heat supplied to the more than 400 district heating networks in Denmark. In evaluation of the environmental consequences of this heat production, the typical approach has been to assume that other (fossil) fuels could be saved on a 1:1 basis (e.g. 1 GJ of waste heat delivered substitutes for 1 GJ of coal-based heat). This paper investigates consequences of waste-based heat substitution in two specific Danish district heating networks and the energy-associated interactions between the plants connected to these networks. Despite almost equal electricity and heat efficiencies at the waste incinerators connected to the two district heating networks, the energy and CO{sub 2} accounts showed significantly different results: waste incineration in one network caused a CO{sub 2} saving of 48 kg CO{sub 2}/GJ energy input while in the other network a load of 43 kg CO{sub 2}/GJ. This was caused mainly by differences in operation mode and fuel types of the other heat producing plants attached to the networks. The paper clearly indicates that simple evaluations of waste-to-energy efficiencies at the incinerator are insufficient for assessing the consequences of heat substitution in district heating network systems. The paper also shows that using national averages for heat substitution will not provide a correct answer: local conditions need to be addressed thoroughly otherwise we may fail to assess correctly the heat recovery from waste incineration.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Use of a hybrid technology in a critical security system.

Assigning an acceptable level of power reliability in a security system environment requires a methodical approach to design when considering the alternatives tied to the reliability and life of the system. The downtime for a piece of equipment, be it for failure, routine maintenance, replacement, or refurbishment or connection of new equipment is a major factor in determining the reliability of the overall system. In addition to these factors is the condition where the system is static or dynamic in its growth. Most highly reliable security power source systems are supplied by utility power with uninterruptable power source (UPS) and generator backup. The combination of UPS and generator backup with a reliable utility typically provides full compliance to security requirements. In the energy market and from government agencies, there is growing pressure to utilize alternative sources of energy other than fossil fuel to increase the number of local generating systems to reduce dependence on remote generating stations and cut down on carbon effects to the environment. There are also conditions where a security system may be limited on functionality due to lack of utility power in remote locations. One alternative energy source is a renewable energy hybrid system including a photovoltaic or solar system with battery bank and backup generator set. This is a viable source of energy in the residential and commercial markets where energy management schemes can be incorporated and systems are monitored and maintained regularly. But, the reliability of this source could be considered diminished when considering the security system environment where stringent uptime requirements are required.

14 SOLAR ENERGY↗

Naval Station Newport Wind Resource Assessment

The U.S. Environmental Protection Agency (EPA) launched the RE-Powering America's Land initiative to encourage development of renewable energy (RE) on potentially contaminated land and mine sites. EPA is collaborating with the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) to evaluate RE options at Naval Station (NAVSTA) Newport in Newport, Rhode Island where multiple contaminated areas pose a threat to human health and the environment. Designated a superfund site on the National Priorities List in 1989, the base is committed to working toward reducing the its dependency on fossil fuels, decreasing its carbon footprint, and implementing RE projects where feasible. The Naval Facilities Engineering Service Center (NFESC) partnered with NREL in February 2009 to investigate the potential for wind energy generation at a number of Naval and Marine bases on the East Coast. NAVSTA Newport was one of several bases chosen for a detailed, site-specific wind resource investigation. NAVSTA Newport, in conjunction with NREL and NFESC, has been actively engaged in assessing the wind resource through several ongoing efforts. This report focuses on the wind resource assessment, the estimated energy production of wind turbines, and a survey of potential wind turbine options based upon the site-specific wind resource.

14 SOLAR ENERGY↗