Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Asynchronous sampling of speech with some vocoder experimental results

The method of asynchronously sampling speech is based upon the derivatives of the acoustical speech signal. The following results are apparent from experiments to date: (1) It is possible to represent speech by a string of pulses of uniform amplitude, where the only information contained in the string is the spacing of the pulses in time; (2) the string of pulses may be produced in a simple analog manner; (3) the first derivative of the original speech waveform is the most important for the encoding process; (4) the resulting pulse train can be utilized to control an acoustical signal production system to regenerate the intelligence of the original speech.

Babcock, M. L.↗

Image registration - Similarity measure and preprocessing method comparisons

An experimental comparison of several similarity measures and preprocessing techniques used for the registration of temporally differing images is carried out. It is found that preprocessing of the images via a gradient operator improves the registration performance. This is in agreement with a derived optimal processor based upon image and temporal difference characteristics.

Svedlow, M.↗

Measurements of some parameters of thermal sparks with respect to their ability to ignite aviation fuel/air mixtures

A method used to generate thermal sparks for experimental purposes and methods by which parameters of the sparks, such as speed, size, and temperature, were measured are described. Values are given of the range of such parameters within these spark showers. Titanium sparks were used almost exclusively, since it is particles of this metal which are found to be ejected during simulation tests to carbon fiber composite (CFC) joints. Tests were then carried out in which titanium sparks and spark showers were injected into JP4/(AVTAG F40) mixtures with air. Single large sparks and dense showers of small sparks were found to be capable of causing ignition. Tests were then repeated using ethylene/air mixtures, which were found to be more easily ignited by thermal sparks than the JP4/ air mixtures.

Haigh, S. J.↗

Ground Vibration Testing at NASA Armstrong, Emphasizing on Passive Aeroelastic Tailored Wing Ground Vibration Test Using Fixed Base Correction Method

How does experimental mechanics contribute to aircraft aeroelastic airworthiness? The aviation community is always improving analysis and testing techniques to realize quicker, cheaper, reliable solutions. A ground vibration test (GVT) is conducted to identify structural mode shapes, frequencies, and damping values to validate analytical models used for flutter analysis, which shows whether a structure has acceptable aeroelastic flutter margins for airworthiness. The FLL recently conducted a GVT of the Passive Aeroelastic Tailored (PAT) Wing using an experimental modal technique called Fixed Base Correction (FBC). The GVT objective was to obtain the PAT wing modal characteristics to compare test results with finite element model (FEM) results for the tow-steered wingbox.

loads testing↗

Active control of sound radiation from a vibrating rectangular panel by sound sources and vibration inputs - An experimental comparison

Active control of sound radiation from a rectangular panel by two different methods has been experimentally studied and compared. In the first method a single control force applied directly to the structure is used with a single error microphone located in the radiated acoustic field. Global attenuation of radiated sound was observed to occur by two main mechanisms. For 'on-resonance' excitation, the control force had the effect of increasing the total panel input impedance presented to the nosie source, thus reducing all radiated sound. For 'off-resonance' excitation, the control force tends not significantly to modify the panel total response amplitude but rather to restructure the relative phases of the modes leading to a more complex vibration pattern and a decrease in radiation efficiency. For acoustic control, the second method, the number of acoustic sources required for global reduction was seen to increase with panel modal order. The mechanism in this case was that the acoustic sources tended to create an inverse pressure distribution at the panel surface and thus 'unload' the panel by reducing the panel radiation impedance. In general, control by structural inputs appears more effective than control by acoustic sources for structurally radiated noise.

Fuller, C. R.↗

Prediction of sonic boom from experimental near-field overpressure data. Volume 1: Method and results

A computerized procedure for predicting sonic boom from experimental near-field overpressure data has been developed. The procedure extrapolates near-field pressure signatures for a specified flight condition to the ground by the Thomas method. Near-field pressure signatures are interpolated from a data base of experimental pressure signatures. The program is an independently operated ODIN (Optimal Design Integration) program which obtains flight path information from other ODIN programs or from input.

Glatt, C. R.↗

Experimental evaluation of the certification-trail method

Certification trails are a recently introduced and promising approach to fault-detection and fault-tolerance. A comprehensive attempt to assess experimentally the performance and overall value of the method is reported. The method is applied to algorithms for the following problems: huffman tree, shortest path, minimum spanning tree, sorting, and convex hull. Our results reveal many cases in which an approach using certification-trails allows for significantly faster overall program execution time than a basic time redundancy-approach. Algorithms for the answer-validation problem for abstract data types were also examined. This kind of problem provides a basis for applying the certification-trail method to wide classes of algorithms. Answer-validation solutions for two types of priority queues were implemented and analyzed. In both cases, the algorithm which performs answer-validation is substantially faster than the original algorithm for computing the answer. Next, a probabilistic model and analysis which enables comparison between the certification-trail method and the time-redundancy approach were presented. The analysis reveals some substantial and sometimes surprising advantages for ther certification-trail method. Finally, the work our group performed on the design and implementation of fault injection testbeds for experimental analysis of the certification trail technique is discussed. This work employs two distinct methodologies, software fault injection (modification of instruction, data, and stack segments of programs on a Sun Sparcstation ELC and on an IBM 386 PC) and hardware fault injection (control, address, and data lines of a Motorola MC68000-based target system pulsed at logical zero/one values). Our results indicate the viability of the certification trail technique. It is also believed that the tools developed provide a solid base for additional exploration.

Sullivan, Gregory F.↗

Preliminary analysis of problem of determining experimental performance of air-cooled turbine I : methods for determining heat-transfer characteristics

In determining the experimental performance of an air-cooled turbine, the heat-transfer characteristics must be evaluated. The suggested formulas that are required to determine these characteristics are presented. The formulas have a form in which dependent parameters are expressed as unknown functions of independent parameters. Methods of experimenting to determine these functions are suggested. In some cases general heat-transfer discussions that lead to the suggested forms of the formulas are given.

TURBINE COOLING↗

Investigation of Flight Test Methods for measuring the performance of general aviation aircraft

A theoretical and experimental investigation of methods for measuring the performance of general aviation airplanes was conducted using relatively simple instrumentation currently available and data extraction techniques established from efforts in other disciplines. The possibilities of improving flight test data by use of improved modern instrumentation and digital data recording and data analysis were considered.

Bull, G.↗

Mass flow requirements for LFC wing design

The problem of determining optimum suction mass flow requirements for LFC wings is addressed. Some previous methods for predicting the extent of laminar flow over swept wings with suction are briefly reviewed. These range from the purely empirical to those utilizing tabulated linear stability computations. The present method is described. This method solves the linear, incompressible stability equations by spectral techniques. The maximum temporal amplification of boundary layer crossflow and 2-D disturbances is determined for waves of a given frequency. Group velocities are used to integrate these amplification rates along the wing to yield the logarithmic amplitude ratio or 'N factor' of the disturbance. The 'N factor' calibration of a computer code utilizing this method is described, using experimentally determined transition data. The method is shown to be as consistent as previously used 'fixed wavelength' methods.

Srokowski, A. J.↗

Application of the vortex-lattice technique to the analysis of thin wings with vortex separation and thick multi-element wings

Two techniques for extending the range of applicability of the basic vortex-lattice method are discussed. The first improves the computation of aerodynamic forces on thin, low-aspect-ratio wings of arbitrary planforms at subsonic Mach numbers by including the effects of leading-edge and tip vortex separation, characteristic of this type wing, through use of the well-known suction-analogy method of E. C. Polhamus. Comparisons with experimental data for a variety of planforms are presented. The second consists of the use of the vortex-lattice method to predict pressure distributions over thick multi-element wings (wings with leading- and trailing-edge devices). A method of laying out the lattice is described which gives accurate pressures on the top and part of the bottom surface of the wing. Limited comparisons between the result predicted by this method, the conventional lattice arrangement method, experimental data, and 2-D potential flow analysis techniques are presented.

Smith, C. W.↗

An evaluation of fracture analysis methods

The results of an experimental and predictive round robin on the applications of fracture analysis methods are presented. The objective of the round robin was to verify whether fracture analysis methods currently in use can or cannot predict failure loads on complex structural components containing cracks. Fracture results from tests on a number of compact specimens were used to make the predictions. The accuracy of the prediction methods was evaluated in terms of the variation in the ratio of predicted to experimental failure loads, and the predictions methods are ranked in order of minimum standard error. A range of applicability of the different methods was also considered in assessing their usefulness. For 7075-T651 aluminum alloy, the best methods were: the effective K sub R curve; the critical crack-tip opening displacement (CTOD) criterion using a finite element analysis; and the K sub R curve with the Dugdale model. For the 2024-T351 aluminum alloy, the best methods included: the two-parameter fracture criterion (TPFC); the CTOD parameter using finite element analysis; the K-curve with the Dugdale model; the deformation plasticity failure assessment diagram (DPFAD); and the effective K sub R curve with a limit load condition. For 304 stainless steel, the best methods were the limit load analysis; the CTOD criterion using finite-element analysis TPFC and DPFAD. Some sample experimental results are given in an appendix.

Newman, J. C., Jr.↗

Experimental Verification Of The Osculating Cones Method For Two Waverider Forebodies At Mach 4 and 6

The NASA Langley Research Center Unitary Plan Wind Tunnel and the 20-Inch Mach 6 Tunnel were used to test two osculating cones waverider models. The Mach-4 and Mach-6 shapes were generated using the interactive design tool WIPAR. WIPAR performance predictions are compared to the experimental results. Vapor screen results for the Mach-4 model at the on- design Mach number provide visual verification that the shock is attached along the entire leading edge, within the limits of observation. WIPAR predictions of pressure distributions and aerodynamic coefficients show general agreement with the corresponding experimental values.

Miller, Rolf W.↗

The experimental determination of the moments of inertia of airplanes

The application of the pendulum method to the experimental determination of the moments of inertia of airplanes is discussed in this report. Particular reference is made to the effects of the air, in which the airplane is immersed, on the swinging tests and to the procedure by which these effects are taken into account. This procedure has been used for some time, and the data on several airplanes for which the moments of inertia have been found are included.

Soule, Hartley A↗

TPSAS-NF1676L-27686-DND

Accurate flight prediction methods are critical for all aspects of vehicle performance, handling characteristics, and structural integrity. The first NASA/Industry/DoD workshop on wind tunnel/flight correlation was held in 1981, when discrepancies arising from Reynolds number effects, aeroelastic effects, and tunnel wall and sting interference effects posed significant barriers to experimentally-based prediction methods in use at that time. Significant advances in ground-based experimental capabilities and facilities, CFD methods, and flight test technology in the next 20 years significantly improved the tools available for predictions. In addition, numerous new production and experimental military and civil aircraft completed flight testing, offering an unprecedented experience base and data for assessing the accuracy of current prediction methods and practices. Thus, the first Flight Prediction Workshop (FPW) was held in 2002. The objective of the 2002 workshop and the current 3 day workshop for technical specialists is to provide a forum for the exchange of: experiences and lessons learned, critical assessments of the state of the art, and recommendations for further developments in flight prediction methodology. Information and opinions provided by the workshop will be incorporated in R&T planning for future government activities in aerodynamics, aeroelasticity, aeroacoustics, propulsion/air frame integration, etc.

Joseph H Morrison↗

Preliminary Results from an Experimental Assessment of a Natural Laminar Flow Design Method

A 5.2% scale semispan model of the new Common Research Model with Natural Laminar Flow (CRM-NLF) was tested in the National Transonic Facility (NTF) at the NASA Langley Research Center. The model was tested at transonic cruise flight conditions with Reynolds numbers based on mean aerodynamic chord ranging from 10 to 30 million. The goal of the test was to experimentally validate a new design method, referred to as Crossflow Attenuated NLF (CATNLF), which shapes airfoils to have pressure distributions that delay transition on wings with high sweep and Reynolds numbers. Additionally, the test aimed to characterize the NTF laminar flow testing capabilities, as well as establish best practices for laminar flow wind tunnel testing. Preliminary results regarding the first goal of validating the new design method are presented in this paper. Experimental data analyzed in this assessment include surface pressure data and transition images. The surface pressure data acquired during the test agree well with computational fluid dynamics (CFD) results. Transition images at a variety of Reynolds numbers and angles of attack are presented and compared to computational transition predictions. The experimental data are used to assess transition due to a turbulent attachment line, as well as crossflow and Tollmien-Schlichting modal instabilities. Preliminary results suggest the CATNLF design method is successful at delaying transition on wings with high sweep. Initial analysis of the transition front images showed transition Reynolds numbers that exceed historic experimental values at similar sweep angles. , section lift

Lynde, Michelle N.↗

An evaluation of random analysis methods for the determination of panel damping

An analysis is made of steady-state and non-steady-state methods for the measurement of panel damping. Particular emphasis is placed on the use of random process techniques in conjunction with digital data reduction methods. The steady-state methods considered use the response power spectral density, response autocorrelation, excitation-response crosspower spectral density, or single-sided Fourier transform (SSFT) of the response autocorrelation function. Non-steady-state methods are associated mainly with the use of rapid frequency sweep excitation. Problems associated with the practical application of each method are evaluated with specific reference to the case of a panel exposed to a turbulent airflow, and two methods, the power spectral density and the single-sided Fourier transform methods, are selected as being the most suitable. These two methods are demonstrated experimentally, and it is shown that the power spectral density method is satisfactory under most conditions, provided that appropriate corrections are applied to account for filter bandwidth and background noise errors. Thus, the response power spectral density method is recommended for the measurement of the damping of panels exposed to a moving airflow.

Bhat, W. V.↗

Investigation of Multiphase Flow in a Packed Bed Reactor Under Microgravity Conditions

In this paper we study the two-phase flow phenomena in a packed bed reactor using an integrated experimental and numerical method. The cylindrical bed is filled with uniformly sized spheres. In the experiment water and air are injected into the bed simultaneously. The pressure distribution along the bed will be measured. The numerical simulation is based on a two-phase flow solver which solves the Navier-Stokes equations on Cartesian grids. A novel coupled level set and moment of fluid method is used to construct the interface. A sequential method is used to position spheres in the cylinder. Preliminary experimental results showed that the tested flow rates resulted in pulse flow. The numerical simulation revealed that air bubbles could merge into larger bubbles and also could break up into smaller bubbles to pass through the pores in the bed. Preliminary results showed that flow passed through regions where the porosity is high. Comparison between the experimental and numerical results in terms of pressure distributions at different flow injection rates will be conducted. Comparison of flow phenomena under terrestrial gravity and microgravity will be made.

computational fluid dynamics↗