Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy Recovery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Efficient Removal of Metolachlor and Bacterial Community of Biofilm in Bioelectrochemical Reactors

The microbial fuel cell (MFC) provides an inexhaustible electron acceptor to generate current and enhance the degradation of organic compounds. In MFCs with metolachlor as the sole carbon source, the degradation efficiency accelerated by 98%, with 61–76% of enhancement for the degradates, ethane sulfonic acid and oxanilic acid, respectively. According to quantifying primary metabolites of deschloro and metolachlor-2-hydroxyas, dechlorination and alcoholization were deemed as antecedent steps of metolachlor bioelectrochemical degradation. The energy recovery was infeasible by sole addition of metolachlor (at 13 ± 4 °C from equivalent weight of 0.224 mg). In MFCs with metolachlor and sodium acetate as the concomitant carbon sources, the electricity generation recovered to a level comparable to the controls, instead of increasing the removal efficiency of metolachlor. These results suggest that a low-efficiently direct electron transfer occurred between electricigens and metolachlor degraders. The Illumina sequencing showed that species of Paracoccus and Aquamicrobium played a potential degradation effect, while Comamonas sp. replaced Geobacter sp. as the predominant electricigen after addition of metolachlor. This study demonstrates that MFCs could be used as a promising alternative for treatment of chloroacetanilide herbicide contaminated wastewaters by means of a rapidly established active bacterial community. .

60 APPLIED LIFE SCIENCES↗

Application of unsupervised deep learning to image segmentation and in-situ contact angle measurements in a CO 2 -water-rock system

Rock surface wettability is a critical property that regulates multiphase flows in porous media, which can be quantified using the surface contact angle (CA). X-ray micro-computed tomography (μCT) provides an effective approach to in-situ measurements of surface CAs. However, the CA measurement accuracy depends significantly on the quality of CT image segmentation, which is the clustering of CT pixels into separate phases. Inspired by this, we developed a deep learning (DL)-based CA measurement workflow. Motivated by the recent tremendous progress in unsupervised learning techniques and aiming to avoid expensive manual data annotations, an unsupervised DL pipeline for CT image segmentation was proposed and implemented, which includes unsupervised model training and post-processing. The unsupervised model training was driven by a novel loss function constrained with feature similarity and spatial continuity and implemented by iterative forward and backward paths; the former clustered the pixel-wise feature vectors extracted by convolution neural networks, whereas the latter updated the parameters using gradient descent. An over-segmentation strategy was adopted for model training. The post-processing steps based on agglomerative hierarchical clustering (AHC) were implemented to further merge the over-segmented model output to the desired cluster number, which is intended to improve the efficiency of image segmentation. The developed unsupervised DL pipeline was compared with other commonly-used image segmentation methods using pixel-wise and physics-based evaluation metrics on a synthetic raw-image dataset, which had a known ground truth. The unsupervised DL pipeline showed the best performance. Next, the segmented images were input to an automatic CA measurement tool, and the results were validated by comparisons with manual measurements. The CA values from the manual and automatic measurements showed similar distributions and statistical properties. The automatic measurement demonstrated a wider spectrum because of the much larger number of measurement data points. The primary novelty of the unsupervised DL pipeline developed in this study lies in the novel loss function and the over-segmentation strategy associated with AHC post-processing. Finally, the workflow has been proven an efficient tool for pore-scale wettability characterization, which has a wide range of applications in fundamental studies of multiphase flows in natural porous media, which have critical implications to geological carbon sequestration, hydrocarbon energy recovery, and contaminant transport in groundwater.

42 ENGINEERING↗

Numerical analysis of experimental studies of methane hydrate dissociation induced by depressurization in a sandy porous medium

Methane Hydrates (MHs) are a promising energy source abundantly available in nature. Understanding the complex processes of MH formation and dissociation is critical for the development of safe and efficient technologies for energy recovery. Many laboratory and numerical studies have investigated these processes using synthesized MH-bearing sediments. A near-universal issue encountered in these studies is the spatial heterogeneous hydrate distribution in the testing apparatus. In the absence of direct observations (e.g. using X-ray computed tomography) coupled with real time production data, the common assumption made in almost all numerical studies is a homogeneous distribution of the various phases. In an earlier study (Yin et al., 2018) that involved the numerical description of a set of experiments on MH-formation in sandy medium using the excess water method, we showed that spatially heterogeneous phase distribution is inevitable and significant. In the present study, we use as a starting point the results and observations at the end of the MH formation and seek to numerically reproduce the laboratory experiments of depressurization-induced dissociation of the spatially-heterogeneous MH distribution. This numerical study faithfully reproduces the geometry of the laboratory apparatus, the initial and boundary conditions of the system, and the parameters of the dissociation stimulus, capturing accurately all stages of the experimental process. Using inverse modelling (history-matching) that minimized deviations between the experimental observations and numerical predictions, we determined the values of all the important flow, thermal, and kinetic parameters that control the system behaviour, which yielded simulation results that were in excellent agreement with the measurements of key monitored variables, i.e. pressure, temperature, cumulative production of gas and water over time. We determined that at the onset of depressurization (when the pressure drop – the driving force of dissociation – is at its maximum), the rate of MH dissociation approaches that of an equilibrium reaction and is limited by the heat transfer from the system surroundings. Furthermore, as the effect of depressurization declines over time, the dissociation reaction becomes kinetically limited despite significant heat inflows from the boundaries, which lead to localized temperature increases in the reactor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Wettability Alteration of Calcite, Silica and Illite Surfaces in Subsurface Environments: A Case Study of Asphaltene Self-Assembly at Solid Interfaces

A basic understanding of dynamic wettability alteration at complex solid interfaces in varying fluidic environments representative of the subsurface environments is essential for engineering field-scale strategies to enhance energy recovery while reducing environmental impacts. In this study, we characterize dynamic wettability alteration at solid surfaces (e.g., calcite, silica and illite) resulting from the self-assembly and adsorption of polyaromatic macromolecules known as asphaltenes in heptane and toluene solvents at 200 bar and 313 K using classical molecular dynamics simulations. These conditions are chosen to be representative of the subsurface environments. On adding asphaltenes, the equilibrium contact angles on calcite, silica and illite surfaces which are in the range of 25–34° increased to 69–79°. The adsorption and self-assembly of asphaltene molecules on the solid surfaces and the accumulation on water/hydrocarbon interfaces reduces the spreading distances of water molecules and enhances the hydrophobicity of the solid surfaces. Moreover, the accumulation of asphaltene molecules at the water/liquid hydrocarbon interfaces results in a reduction of the interfacial tension of water/heptane and water/toluene, thus stabilizing the water droplet. The enhanced surface hydrophobicity contributes to the formation of layered structures of heptane and toluene close to the solid surfaces and reduces the self-diffusivities of these molecules close to the surface.

42 ENGINEERING↗

Improving anaerobic digestion of sewage sludge to renewable natural gas by the Advanced Pretreatment & Anaerobic Digestion technology (APAD): Pilot testing

Conventional anaerobic digestion (AD) of sewage sludge in wastewater treatment facilities suffers from low carbon conversion efficiency (CCE = 40%) and requires costly CO2 removal for injection of the produced CH4 into the natural gas grid. To address these limitations, we developed the Advanced Pretreatment and Anaerobic Digestion (APAD) process. This integrates Advanced Wet Oxidation & Steam Explosion (AWOEx) pretreatment of residual sludge after conventional AD, followed by biogas upgradation using a novel methanogenic strain, Methanothermobacter wolfeii BSEL, converting CO2 with H2 into CH4 or RNG (renewable natural gas). Pilot-scale results demonstrated that AWOEx pretreatment achieved a CCE of 62% for the residual sludge, 68% higher than the conventional AD process. The CH4 production was further increased by 79%. Subsequent biogas upgrading in a trickling bed reactor with H2 further enhanced total methane output by 100% and resulted in a final CO2 concentration of =3%. The integrated APAD process achieved a remarkable overall CCE of 83%, resulting in a 200% increase in RNG output when compared to conventional AD. Techno-economic analysis revealed that AWOEx pretreatment alone reduced sludge treatment costs from $494 to $253 per ton of dry solids. The complete APAD process incurred a higher cost of treatment of $530 per ton, driven by prices for bottled H2. The process did, however, show gains in energy recovery and decarbonization. Renewable H2, which may reduce in price in the near future, can positively improve the economics of biogas upgrading for the APAD process.

Life Cycle Assessment (LCA)↗

Hydrothermal liquefaction of Cyanidioschyzon merolae and Salicornia bigelovii Torr.: The interaction effect on product distribution and chemistry

Hydrothermal liquefaction (HTL) has proven to be a promising technology for processing wet biomass into valuable biofuel intermediates. We investigated the influence of HTL process parameters on the individual and co-liquefaction of Salicornia bigelovii Torr. (SL) and Cyanidioschyzon merolae (CM) biomass and their respective product properties and characteristics. SL and CM biomasses were subjected to HTL conditions of process temperatures (250–350 °C), 10 wt% solid loading, 30 min reaction time, and co-liquefaction ratios (80–20, 50–50, 20–80, CM-SL, respectively). The individual maximum HTL biocrude yields for CM (34.63 wt%) and SL (7.63 wt%) were obtained at 300 °C. In both cases, biocrude oils had a higher carbon and hydrogen content relative to those of the original biomass. The HHV (higher heating value) values for the biocrude samples ranged from 24.2 to 33.12 MJ/kg, which were significantly higher than those of the original biomasses. A positive synergistic effect was observed during the co-liquefaction of two biomasses, where the experimental yield of biocrude oil was higher than the theoretical value. During the co-liquefaction experiments, a maximum biocrude yield of 32.95 wt% was obtained at 300 °C and 80–20 CM-SL biomass mix ratio. Co-liquefaction led to an increase in the energy content of the co-liquefied biocrude oil and a higher energy recovery rate. Finally, the properties of HTL products and biomasses were determined with TGA, CHN elemental analyzer, GC/MS, bomb calorimeter, HACH Spectrophotometer, and ICP OES.

09 BIOMASS FUELS↗

Application of Box-Behnken design in optimizing product properties of supercritical methanol co -liquefaction of rice straw and linear low-density polyethylene

We report co-processing of plastic and biomass wastes to produce high-quality fuel has been attracting considerable interest in energy recovery. This work employed Box-Behnken Design (BBD) to optimize yield and properties of oil from supercritical methanol (scMeOH) co-liquefaction of rice straw (RS) and linear low-density polyethylene (LLDPE). Three independent variables of reaction temperature (270, 300, and 330°C), holding time (60, 90, and 120 mins), and RS/LLDPE mass ratio (0.15, 0.50, and 0.85) were selected for experiments. A maximum oil yield of 34.17 wt% was achieved at 303°C, 96 mins, and RS/LLDPE ratio of 0.59 according to BBD. Temperature and RS/LLDPE ratio dominated the oil yield and synergistic effects during co-liquefaction, whereas time was an insignificant factor. Optimum oil from co-liquefaction contained substantial hydrocarbons content of 32.91% compared to that from single RS-derived oil of 7.77%. Solid product obtained at the optimum condition could be used as solid fuel, due to its relatively high HHV of 43.08 MJ/kg compared to the other solid fuels (13.90–32.14 MJ/kg). This work provides a deep understanding of the co-processing of solid biomass and plastic wastes.

09 BIOMASS FUELS↗

Catalytic degradation of waste rubbers and plastics over zeolites to produce aromatic hydrocarbons

Catalytic conversion of waste rubbers and plastics into aromatic hydrocarbons is a promising approach to waste management and energy recovery. In the present study, acidic HY zeolites were supported by cobalt, iron, and zirconium, and the catalysts were characterized by powder X-ray diffraction, nitrogen adsorption-desorption, ammonia temperature programmed desorption, X-ray photoelectron spectroscopy, and pyridine-Fourier transform infrared spectroscopy. Here, the catalytic degradation of waste polybutadiene rubbers (BR) was conducted to investigate the degradation mechanism and evaluate the catalytic activity of supported zeolites. Experimental results indicated that HY loaded by zirconium and iron led to a higher content of Lewis acid sites as opposed to cobalt supported one. Compared with the non-catalytic pyrolysis of BR, the zirconium supported HY (Zr/HY) led to a 10-fold increase in aromatic hydrocarbons production with a distinctively high selectivity of 97.9%. A series of waste polymers including waste tires (WT), polyethylene (PE), polycarbonate (PC), and BR, were subjected to catalytic pyrolysis to explore the effects of polymer type on aromatic hydrocarbons generation, and BR was the most effective substrate, with yield enhancement reaching 2.4 over Zr/HY. Catalytic co-pyrolysis of waste rubbers and plastics was conducted to probe the effect of polymer structure on aromatic hydrocarbons formation, where a significant synergistic effect was observed in the PE co-fed with PC run.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Transmission of High-Power Electron Beams Through Small Apertures

Tests were performed to pass a 100 MeV, 430 kWatt c.w. electron beam from the energy-recovery linac at the Jefferson Laboratory's FEL facility through a set of small apertures in a 127 mm long aluminum block. Beam transmission losses of 3 p.p.m. through a 2 mm diameter aperture were maintained during a 7 hour continuous run.

43 PARTICLE ACCELERATORS↗

HOM frequency control of SRF cavity in high current ERLs

The acceleration of high-current beam in Superconducting Radio Frequency (SRF) cavities is a challenging but essential for a variety of advanced accelerators. SRF cavities should be carefully designed to minimize the High Order Modes (HOM) power generated in the cavities by the beam current. The reduction of HOM power we demonstrate in a particular case can be quite large. This paper presents a method to systematically control the HOM resonance frequencies in the initial design phase to minimize the HOM power generation. This method is expected to be beneficial for the design of high SRF cavities addressing a variety of Energy Recovery Linac (ERL) applications.

43 PARTICLE ACCELERATORS↗

Particulate solid attrition in CFB systems – An assessment for emerging technologies

Over the years, circulating fluidized bed systems have been designed for chemical conversion and energy recovery due to the ability of allowing continuous processing. While many CFB technologies are well established, a number of emerging technologies in recent years are utilizing the CFB concept, such as chemical looping combustion, novel continuous temperature swing adsorption, and transport gasifiers. A major uncertainty in these new technologies is the effect that attrition of bed material has on the overall process economics and system operability. Furthermore this work presents a review of the study of attrition for CFB systems, including relevant material properties, basic modeling and prediction, as well as particle population balance techniques. Because some of these new processes use novel materials, this work focuses on applying fundamental material properties to the understanding of attrition.

01 COAL, LIGNITE, AND PEAT↗

Experimental investigation of wood combustion in a fixed bed with hot air

Highlights: • Upward combustion is a new combustion concept with ignition by hot primary air. • Upward combustion has three stages: short drying, rapid devolatilization and char combustion. • Variation of fuel moisture and inert content have little influence on the combustion. • Experimental comparison between conventional and upward combustion is presented. - Abstract: Waste combustion on a grate with energy recovery is an important pillar of municipal solid waste (MSW) management in the Netherlands. In MSW incinerators fresh waste stacked on a grate enters the combustion chamber, heats up by radiation from the flame above the layer and ignition occurs. Typically, the reaction zone starts at the top of the waste layer and propagates downwards, producing heat for drying and devolatilization of the fresh waste below it until the ignition front reaches the grate. The control of this process is mainly based on empiricism. MSW is a highly inhomogeneous fuel with continuous fluctuating moisture content, heating value and chemical composition. The resulting process fluctuations may cause process control difficulties, fouling and corrosion issues, extra maintenance, and unplanned stops. In the new concept the fuel layer is ignited by means of preheated air (T > 220 °C) from below without any external ignition source. As a result a combustion front will be formed close to the grate and will propagate upwards. That is why this approach is denoted by upward combustion. Experimental research has been carried out in a batch reactor with height of 4.55 m, an inner diameter of 200 mm and a fuel layer height up to 1 m. Due to a high quality two-layer insulation adiabatic conditions can be assumed. The primary air can be preheated up to 350 °C, and the secondary air is distributed via nozzles above the waste layer. During the experiments, temperatures along the height of the reactor, gas composition and total weight decrease are continuously monitored. The influence of the primary air speed, fuel moisture and inert content on the combustion characteristics (ignition rate, combustion rate, ignition front speed and temperature of the reaction zone) is evaluated. The upward combustion concept decouples the drying, devolatilization and burnout phase. In this way the moisture and inert content of the waste have almost no influence on the combustion process. In this paper an experimental comparison between conventional and reversed combustion is presented.

09 BIOMASS FUELS↗

Effect of a food waste disposer policy on solid waste and wastewater management with economic implications of environmental externalities

Highlights: • Integrating food waste disposers in waste management systems. • Emissions reduction can reach ∼42% depending on tested scenarios. • Economic gains can reach ∼28% including environmental externalities. • Variation in cost of sludge management exhibit a significant impact on savings. - Abstract: In this study, the carbon footprint of introducing a food waste disposer (FWD) policy was examined in the context of its implications on solid waste and wastewater management with economic assessment of environmental externalities emphasizing potential carbon credit and increased sludge generation. For this purpose, a model adopting a life cycle inventory approach was developed to integrate solid waste and wastewater management processes under a single framework and test scenarios for a waste with high organic food content typical of developing economies. For such a waste composition, the results show that a FWD policy can reduce emissions by nearly ∼42% depending on market penetration, fraction of food waste ground, as well as solid waste and wastewater management schemes, including potential energy recovery. In comparison to baseline, equivalent economic gains can reach ∼28% when environmental externalities including sludge management and emissions variations are considered. The sensitivity analyses on processes with a wide range in costs showed an equivalent economic impact thus emphasizing the viability of a FWD policy although the variation in the cost of sludge management exhibited a significant impact on savings.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Evolution of phosphorus complexation and mineralogy during (hydro)thermal treatments of activated and anaerobically digested sludge: Insights from sequential extraction and P K-edge XANES

(Hydro)thermal treatments of sewage sludge is a promising option that can simultaneously target safe waste disposal, energy recovery, and nutrient recovery/recycling. The speciation of phosphorus (P) in sludge is of great relevance to P reclamation/recycling and soil application of sludge-derived products, thus it is critical to understand the effecHere, this study systematically characterized P speciation (i.e. complexation and mineral forms) in chars derived from pyrolysis and hydrothermal carbonization (HTC) of municipal sewage sludges. Combined sequential extraction and P K-edge X-ray absorption near edge structure (XANES) spectroscopy analysis revealed the dependence of P transformation on treatment conditions and metal composition in the feedstocks. Pyrolysis of sludges decreased the relative abundance of phytic acid while increased the abundance of Al-associated P. HTC thoroughly homogenized and exposed P for interaction with various metals/minerals, with the final P speciation closely related to the composition/speciation of metals and their affinities to P. Results from this study revealed the mechanisms of P transformation during (hydro)thermal treatments of sewage sludges, and might be applicable to other biosolids. Finally, it also provided fundamental knowledge basis for the design and selection of waste management strategies for better P (re)cycling and reclamation.

54 ENVIRONMENTAL SCIENCES↗

Process design tools and techno-economic analysis for capacitive deionization

Capacitive deionization (CDI) devices use cyclical electrosorption on porous electrode surfaces to achieve water desalination. Process modeling and design of CDI systems requires accurate treatment of the coupling among input electrical forcing, input flow rates, and system responses including salt removal dynamics, water recovery, energy storage, and dissipation. Techno-economic analyses of CDI further require a method to calculate and compare between a produced commodity (e.g. desalted water) versus capital and operational costs of the system. In this work, we demonstrate a new modeling and analysis tool for CDI developed as an installable Matlab program that allows direct numerical simulation of CDI dynamics and calculation of key performance and cost parameters. The program is provided for free and is used to run open-source Simulink models. The Simulink environment sends information to the program and allows for a drag and drop design space where users can connect CDI cells to relevant periphery blocks such as grid energy, battery, solar panel, waste disposal, and maintenance/labor cost streams. The program allows for simulation of arbitrary current forcing and arbitrary flow rate forcing of one or more CDI cells. We employ validated well-mixed reactor formulations together with a non-linear circuit model formulation that can accommodate a variety of electric double layer sub-models (e.g. for charge efficiency). The program includes a graphical user interface (GUI) to specify CDI plant parameters, specify operating conditions, run individual tests or parameter batch-mode simulations, and plot relevant results. The techno-economic models convert among dimensional streams of species (e.g. feed, desalted water, and brine), energy, and cost and enable a variety of economic estimates including levelized water costs.

42 ENGINEERING↗

Quantification of the Impact of Acidified Brine on Fracture-Matrix Transport in a Naturally Fractured Shale Using in Situ Imaging and Modeling

Understanding flow, transport, chemical reactions, and hydromechanical processes in fractured geologic materials is key for optimizing a range of subsurface processes including carbon dioxide and hydrogen storage, unconventional energy resource extraction, and geothermal energy recovery. Flow and transport processes in naturally fractured shale rocks have been challenging to characterize due to experimental complexity and the multiscale nature of quantifying continuum scale descriptions of mass exchange between micrometer-scale fractures and nanometer-scale pores. In this study, we use positron emission tomography (PET) to image the transport of a conservative tracer in a naturally fractured Wolfcamp shale core before and after the core was exposed to low pH brine conditions. Image-based experimental observations are interpreted by fitting an analytical transport model to fracture-containing voxels in the core. Results of this analysis indicate subtle increases in matrix diffusivity and a slightly more uniform fracture velocity distribution following exposure to low pH conditions. These observations are compared with a multicomponent one-dimensional reactive transport model that indicates the capacity for a 10% increase in porosity at the fracture-matrix interface as a result of the low pH brine exposure. This porosity change is the result of the dissolution of carbonate minerals in the shale matrix to low pH conditions. Further, this image-based workflow represents a new approach for quantifying spatially resolved fracture-matrix transport processes and provides a foundation for future work to better understand the role of coupled transport, reaction, and mechanical processes in naturally fractured rocks.

58 GEOSCIENCES↗