Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron correlation calculations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Biexcitons are bound in CsPbBr 3 perovskite nanocrystals

Here, we study the energetics of quasiparticle excitations in CsPbBr 3 perovskite nanocrystals using path integral molecular dynamics simulations. Employing detailed molecular models, we elucidate the interplay of anharmonic lattice degrees of freedom, dielectric confinement, and electronic correlation on exciton and biexciton binding energies of a range of nanocrystal sizes. We find generally good agreement with some experimental observations of binding energies and additionally explain the observed size-dependent Stokes shift. The explicit model calculations are compared with simplified approximations to rationalize the lattice contributions to binding. We find that polaron formation significantly reduces exciton binding energies, whereas these effects are negligible for biexciton interactions. While experimentally the binding energy of biexcitons is uncertain, based on our study, we conclude that biexcitons are bound in CsPbBr 3 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Ag-doped As–S–Se chalcogenide glasses: a correlative study of structural and dielectrical properties

This work is focused on investigating the effect of Ag doping on the dielectric and structural properties of the As–S–Se glass system and their suitability for potential applications in optoelectronics, such as electronic and switching components. A series of glasses from the system Agx(As40S30Se30)100-x (x = 5 at.% Ag) were prepared with melt-quenching technique. Morphological and compositional analysis was performed by scanning electron microscopy and energy-dispersive X-ray spectroscopy. Raman spectroscopy measurements have shown structural modifications of the glass network upon Ag doping, with creation of new Ag–(S,Se)–As structures, resulting in increased number of defect states. Variations in dielectric permittivity (e') and dielectric loss (e") were investigated in a wide frequency and temperature range, and explained by dominant dipolar and electronic polarization, as well as correlated with the observed structural changes. Improvement in dielectric properties is observed upon doping with Ag. Furthermore, the low dielectric tangent loss at high frequencies for all glassy samples points to a beneficial ability of the material to absorb energy of the external electric field. Good thermal stability of these glasses is confirmed by the calculated temperature coefficient of the dielectric permittivity. Density of localized states in all glasses was determined from AC conductivity and the dielectric tangent loss using a correlated barrier hopping model, and found to increase with Ag concentration. The overall results suggest that Ag doping enhances the electrical and optical quality of this type of glasses, making them suitable as nonlinear optical materials and their applications in devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Emergent surface resonance from charge density wave symmetry breaking in TiSe 2

Surface confined electronic states provide a fertile ground for discovering emergent phenomena that have no counterpart in the bulk, offering new routes to manipulate correlations, symmetry breaking, and dimensionality at the atomic scale. Here, in this study, we show that charge density wave (CDW) symmetry breaking can yield surface states in 1⁢T−TiSe 2 . Micro–angle-resolved photoemission spectroscopy (µ-ARPES) resolves a sharp, two-dimensional surface resonant state (SRS) that emerges within the CDW reconstructed low energy spectrum. The SRS exhibits notable temperature dependence and its spectral weight collapses around ∼ 160 K, while CDW transition temperature 𝑇 CDW is commonly reported as ≈ 202 K. Slab DFT + 𝑈 calculations reproduce a surface localized resonance when CDW folding brings valence and conduction states into near degeneracy, suggesting a correlation tuned, surface selective origin. These results point to a form of correlation-tuned surface resonance in a layered CDW compound and suggest a framework for engineering low-dimensional quantum states in van der Waals materials via symmetry breaking and electronic structure tuning.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Correlation energy of the uniform electron gas determined by ground-state conditional probability density functional theory

Conditional-probability density functional theory (CP-DFT) is a formally exact method for finding correlation energies from Kohn-Sham DFT without evaluating an explicit energy functional. We present details on how to generate accurate exchange-correlation energies for the ground-state uniform gas. We also use the exchange hole in a CP antiparallel spin calculation to extract the high-density limit. We give a highly accurate analytic solution to the Thomas-Fermi model for this problem, showing its performance relative to Kohn-Sham and may be useful at high temperatures. We explore several approximations to the CP potential. Furthermore, results are compared to accurate parameterizations for both exchange-correlation energies and holes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Accurate Atomic Correlation and Total Energies for Correlation Consistent Effective Core Potentials

Very recently, we introduced a set of correlation consistent effective core potentials (ccECPs) constructed within full many-body approaches. By employing significantly more accurate correlated approaches, we were able to reach a new level of accuracy for the resulting effective core Hamiltonians. We also strived for simplicity of use and easy transferability into a variety of electronic structure methods in quantum chemistry and condensed matter physics. Here, as a reference for future use, we present exact or nearly exact total energy calculations for these ccECPs. The calculations cover H–Kr elements and are based on the state-of-the-art configuration interaction (CI), coupled-cluster (CC), and quantum Monte Carlo (QMC) calculations with systematically eliminated/improved errors. In particular, we carry out full CI/CCSD(T)/CCSDT(Q) calculations with cc-pVnZ with up to n = 6 basis sets and we estimate the complete basis set limits. Using combinations of these approaches, we achieved an accuracy of ≈1–10 mHa for K–Zn atoms and ≈0.1–0.3 mHa for all other elements—within about 1% or better of the ccECP total correlation energies. We also estimate the corresponding kinetic energies within the feasible limit of full CI calculations. In order to provide data for QMC calculations, we include fixed-node diffusion Monte Carlo energies for each element that give quantitative insights into the fixed-node biases for single-reference trial wave functions. The results offer a clear benchmark for future high-accuracy calculations in a broad variety of correlated wave function methods such as CI and CC as well is in stochastic approaches such as real space sampling QMC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Ab initio description of the Bi 2 Sr 2 CaCu 2 O 8+δ electronic structure

Bi-based cuprate superconductors are important materials for both fundamental research and applications. As in other cuprates, the superconducting phase in the Bi compounds lies close to an antiferromagnetic phase. Here, our density functional theory calculations based on the strongly-constrained-and-appropriately-normed exchange correlation functional in Bi 2 Sr 2 CaCu 2 O 8+δ reveal the persistence of magnetic moments on the copper ions for oxygen concentrations ranging from the pristine phase to the optimally hole-doped compound. We also find the existence of ferrimagnetic solutions in the heavily doped compounds, which are expected to suppress superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

A comprehensive first-principles study of the effects of the exchange-correlation functional and magnetism on defect and diffusion properties of the CoCrNi medium-entropy alloy

The present work is a novel, systematic study of the effect of density functional theory input parameters on the vacancy formation energy (VFE), migration barrier for diffusion, and electronic structure for each element in the CoCrNi medium-entropy alloy (MEA). In particular, the novelties include: (1) calculating the aforementioned properties of Co, Cr, or Ni, in the CoCrNi MEA using magnetic and non-magnetic states, and two versions of the generalized gradient approximation: Perdew, Burke, and Ernzerhof (PBE) and the PBE version for solids (PBEsol), and (2) a detailed comparison of 0 K activation energy to experimental creep activation energies. First-principles calculations at 0 K are performed using the Vienna ab-initio simulation package. Special quasirandom structures (SQS) and Widom-type substitution are employed. For each element, Co, Cr, or Ni, non-magnetic calculations result in a higher VFE and larger range of calculated values for the configurations studied. The averaged migration barrier is the highest for Co in the CoCrNi for three of four sets of calculation parameters in the configurations studied. Finally, the results indicate that the average 0 K activation energy for diffusion makes up 70–80% of the experimental creep activation energy, depending on the exchange-correlation functional employed.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Influence of geometry on columnar to equiaxed transition during electron beam powder bed fusion of IN718

Correlation between spot-melt scan parameters (linear spot-density aka areal energy density), build geometry, and solidification microstructure evolution (columnar vs equiaxed) in a powder bed fusion technology is investigated. It is shown that to maintain the equiaxed solidification microstructure evolution in electron beam powder bed additive manufacturing (AM), the areal energy density per layer needs to be scaled with respect to the 2D cross-sectional area of the layer being melted. Samples with two different cross-sectional areas (40 × 40 mm and 20 × 20 mm) have been fabricated with varying areal energy densities. For a given square cross-section (20 × 20 mm), increasing the areal energy density (4.8 MJ/sq.m to 14.7 MJ/sq.m) transitioned the solidification microstructure from columnar to equiaxed. The observed microstructure data (Electron Back Scattered Diffraction - EBSD) is quantified by calculating the principal component (PC) score using a spatial statistics methodology. The sample with equiaxed grains is found to have a low PC score while the sample with columnar grain had a high PC score. A semi-analytical model is used to simulate the heat transfer and the local solidification conditions as a function of processing parameters (linear spot-density). The result from the heat transfer model is correlated with previously quantified microstructure data. Space-Time analysis of the melt pattern is done and correlated with the observed microstructure. In addition, from the findings, appropriate parameters have been used to additively manufacture a turbine blade with site-specific or hybrid solidification microstructure (traditional fabrication possible via a patented method of localized cold working and heat treatment).

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electronic structures and pseudogap nature of the strongly correlated Kondo semimetals and insulators CeNiSn and CeRhX(X=As, Sb)

Employing temperature (T)-dependent angle-resolved photoemission spectroscopy (ARPES) near the Ce 4d absorption edge, we have investigated the electronic structures of the strongly correlated Kondo insulators (KIs) and/or Kondo semimetals of CeNiSn and CeRhX (X=As, Sb), which also belong to potential topological KIs (TKIs). Good agreement is found between the Fermi surfaces (FSs) measured at the Ce 4d→4f on resonance and those calculated and unfolded into the Ce-only Brillouin zone, supporting the crucial Ce 4f contribution to the Fermi-edge states in them. While the FSs of CeRhSb and CeNiSn are similar to each other, they are quite different from those of CeRhAs, which is understood to originate from the semimetallic Kondo ground states of CeNiSn and CeRhSb in contrast to the insulating Kondo ground state of CeRhAs. T-dependent ARPES demonstrates the existence of the Kondo resonance above the Fermi level (EF) and its T-driven decoherence in CeNiSn and CeRhSb, and the existence of the Ce 4f Kondo-like peak well below EF with a pseudogap in CeRhAs. With increasing T, the tail of the Kondo resonance in CeNiSn and CeRhSb loses its coherence, whereas the Ce 4f Kondo-like peak in CeRhAs persists up to T≥200 K. The Kondo temperatures (TKs) are estimated via the analysis of T-dependent ARPES, yielding TK≈80 K (CeNiSn), TK≈180 K (CeRhSb), and TK≫200 K (CeRhAs). High-resolution, low-T ARPES confirms the Kondo resonance just above EF in CeNiSn and CeRhSb Kondo semimetals and the KI ground state of CeRhAs with a pseudogap of Δ≈30 meV, demonstrating the importance of the coherent Kondo states in determining their potential topological properties. The differences in the T-dependent ARPES of CeNiSn and CeRhSb suggest the weaker f-c hybridization in CeNiSn than in CeRhSb (c: conduction electron), which is likely due to the more localized Ni 3d orbitals than the delocalized Rh 4d orbitals. The differences between the T-dependent ARPES of CeNiSn/CeRhSb Kondo semimetals and those of CeRhAs Kondo insulator are likely due to the smaller volume of CeRhAs than those of CeNiSn/CeRhSb.

Kang, J-S↗
DOE OSTI2025

Impact of Pendant Amine Basicity on Electrochemically-Promoted Cobalt Hydride Formation: Kinetic and Mechanistic Analysis

Here, we report the role of pendant amine basicity on the proton-coupled electron transfer (PCET) reactivity for the conversion of [Co III Cp(P Ph 2 N R 2 )(CH 3 CN)] 2+ complexes to [HCo III Cp(P Ph 2 N R 2 )] + , which is a key transformation involved in catalytic CO 2 conversion to formate and in H 2 evolution. Three complexes were studied, where the amine substituent (R) varies from benzyl, methoxyphenyl, or phenyl. In previous work on the benzyl system, we showed that the amine on the P Ph 2 N Bn 2 ligand serves as a kinetically accessible protonation site and enables three participating hydride formation mechanisms. In this work, a combination of electrochemical measurements and theoretical calculations were used to show that the electronic donation at the pendant amine influences the accessible PCET mechanism and proton transfer kinetics related to cobalt hydride formation under analogous reaction conditions. Notably, the amine with the most electron-donating substituent correlates to the lowest barrier for amine protonation, and specific cobalt hydride formation mechanisms can be shut off for the amine with the least electron-donating substituent. The mechanistic and kinetic changes upon modulation of the amine substituent have great implications for overall catalytic efficiency and selectivity, especially to generate the cobalt hydride intermediate involved in selective CO 2 reduction to formate. This work shows how to exploit kinetic basicity using ligand-cooperative design to facilitate PCET reactions involved in energy related transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Strongly Correlated States of Transition Metal Spin Defects: The Case of an Iron Impurity in Aluminum Nitride

We investigate the electronic properties of an exemplar transition metal impurity in an insulator, with the goal of accurately describing strongly correlated defect states. Here, we consider iron in aluminum nitride, a material of interest for hybrid quantum technologies, and we carry out calculations with quantum embedding methods, density matrix embedding theory (DMET) and quantum defect embedding theory (QDET), and with spin-flip time-dependent density functional theory (TDDFT). We show that both DMET and QDET accurately describe the ground state and low-lying excited states of the defect and that TDDFT yields photoluminescence spectra in agreement with experiments. In addition, we provide a detailed discussion of the convergence of our results as a function of the active space used in the embedding methods, thus defining a protocol to obtain converged data directly comparable with experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Lattice distortions and metal-insulator transition in hexagonal FeS

Using total x-ray scattering and density functional theory calculations based on experimental data, we study the metal-insulator transition (MIT) in the strongly correlated system FeS with hexagonal symmetry. We find that it arises from the combined effect of static lattice distortions and antiferromagnetic ordering, while electron-electron correlations appear to play a minor role. The presence of local lattice distortions above the MIT explains well the evolution of transport and magnetic properties with changing temperature or pressure. Intrinsically, lattice distortions in hexagonal FeS act as lattice degrees of freedom that bridge competing electronic phases, thus facilitating transitions between them. The mechanism of MIT operating in h-FeS appears to be common to strongly correlated binary systems involving 3d transition metals, warranting further investigations on the lattice distortions-property relationship in this broad class of materials using the approach adopted here.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Calculated electric dipole moment of NiH X2Delta

A calculated dipole moment of 2.39 D at R sub e = 2.79 a sub 0 is reported, obtained from complete active space SCF/configuration interaction calculations plus one natural orbital iteration. The calculation is in good agreement with the experimental value of 2.4 + or - 0.1 D measured for the lowest vibrational level. In agreement with Gray et al. (1985), it is found that the dipole moment is strongly correlated with the 3d electron population; the good agreement with experiment thus provides verification of the mixed state model of NiH. It is concluded that the electric dipole moment of NiH is a sensitive test of the quality of the NiH wave function.

Walch, S.↗
NASA NTRS1986

The effect of vertical drift on the equatorial F-region stability

Time-dependent ionospheric model calculations for day-time and night-time solutions are presented. The behavior of the growth rate and ion-electron recombination rate for the Rayleigh-Taylor instability on the F-region bottomside is examined as a function of the vertical eastward electric field-magnetic field strength drift velocity. It is observed that on the bottomside F-layer the growth rate exceeds the ion-electron recombination rate even without vertical drift; however, an eastward electric field-magnetic field strength drift can produce an increase in the growth rate by an order of magnitude. The calculated data are compared with previous research and good correlation is detected. The formation of bubbles from a seeding mechanism is investigated.

Hanson, W. B.↗
DOE OSTI2020

Predicting Bond Dissociation Energies and Bond Lengths of Coordinatively Unsaturated Vanadium–Ligand Bonds

Understanding the electronic structure of coordinatively unsaturated transition-metal compounds and predicting their physical properties are of great importance for catalyst design. Bond dissociation energy D e and bond length r e are two of the fundamental quantities for which good predictions are important for a successful design strategy. In the present work, recent experimentally measured bond energies and bond lengths of VX diatomic molecules (X = C, N, S) are used as a gauge to consider the utility of a number of electronic structure methods. Single-reference methods are one focus because of their efficiency and utility in practical calculations, and multireference configuration interaction (MRCISD) methods and a composite coupled cluster (CCC) method are a second focus because of their potential high accuracy. The comparison is especially challenging because of the large multireference M diagnostics of these molecules, in the range 0.15–0.19. For the single-reference methods, Kohn–Sham density functional theory (KS-DFT) has been tested with a variety of approximate exchange-correlation functionals. Of these, MOHLYP provides the bond dissociation energies in best agreement with experiments, and BLYP provides the bond lengths that are in best agreement with experiments; but by requiring good performance for both the D e and r e of the vanadium compounds, MOHLYP, MN12-L, MGGA_MS1, MGGA_MS0, O3LYP, and M06-L are the most highly recommended functionals. The CCC calculations include up to connected pentuple excitations for the valence electrons and up to connected quadruple excitations for the core–valence terms; this results in highly accurate dissociation energies and good bond lengths. In conclusion, averaged over the three molecules, the mean unsigned deviation of CCC bond energies from experimental ones is only 0.4 kcal/mol, demonstrating excellent convergence of theory and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Vibrational properties of heme-nitrosoalkane complexes in comparison with those of their HNO analogs, and reactivity studies towards nitric oxide and Lewis acids

C-Nitroso compounds (RNO, R = alkyl and aryl) are byproducts of drug metabolism and bind to heme proteins, and their heme-RNO adducts are isoelectronic to ferrous nitroxyl (NO-/HNO) complexes. Importantly, heme-HNO compounds are key intermediates in the reduction of NO to N 2 O and nitrite to ammonium in the nitrogen cycle. Ferrous heme-RNO complexes act as stable analogs of these species, potentially allowing for the investigation of the vibrational and electronic properties of unstable heme-HNO intermediates. In this paper, a series of six-coordinate ferrous heme-RNO complexes (where R = iPr and Ph) were prepared using the TPP 2- and 3,5-Me-BAFP 2- co-ligands, and tetrahydrofuran, pyridine, and 1-methylimidazole as the axial ligands (bound trans to RNO). These complexes were characterized using different spectroscopic methods and X-ray crystallography. The complex [Fe(TPP)(THF)(iPrNO)] was further utilized for nuclear resonance vibrational spectroscopy (NRVS), allowing for the detailed assignment of the Fe–N(R)O vibrations of a heme-RNO complex for the first time. The vibrational properties of these species were then correlated with those of their HNO analogs, using DFT calculations. Our studies support previous findings that RNO ligands in ferrous heme complexes do not elicit a significant trans effect. In addition, the complexes are air-stable, and do not show any reactivity of their RNO ligands towards NO. So although ferrous heme-RNO complexes are suitable structural and electronic models for their HNO analogs, they are unsuitable to model the reactivity of heme-HNO complexes. We further investigated the reaction of our heme-RNO complexes with different Lewis acids. Here, [Fe(TPP)(THF)(iPrNO)] was found to be unreactive towards Lewis acids. In contrast, [Fe(3,5-Me-BAFP)(iPrNO) 2 ] is reactive towards all of the Lewis acids investigated here, but in most cases the iron center is simply oxidized, resulting in the loss of the iPrNO ligand. In the case of the Lewis acid B 2 (pin) 2 , the reduced product [Fe(3,5-Me-BAFP)(iPrNH 2 )(iPrNO)] was identified by X-ray crystallography.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Tunable metal hydroxide–organic frameworks for catalysing oxygen evolution

The oxygen evolution reaction is central to making chemicals and energy carriers using electrons. Combining the great tunability of enzymatic systems with known oxide-based catalysts can create breakthrough opportunities to achieve both high activity and stability. Here we report a series of metal hydroxide–organic frameworks (MHOFs) synthesized by transforming layered hydroxides into two-dimensional sheets crosslinked using aromatic carboxylate linkers. MHOFs act as a tunable catalytic platform for the oxygen evolution reaction, where the π–π interactions between adjacent stacked linkers dictate stability, while the nature of transition metals in the hydroxides modulates catalytic activity. Substituting Ni-based MHOFs with acidic cations or electron-withdrawing linkers enhances oxygen evolution reaction activity by over three orders of magnitude per metal site, with Fe substitution achieving a mass activity of 80A $g^{-1}_{catalyst}$ 1 at 0.3 V overpotential for 20 h. Density functional theory calculations correlate the enhanced oxygen evolution reaction activity with the MHOF-based modulation of Ni redox and the optimized binding of oxygenated intermediates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Interpretation of multiple solutions in fully iterative GF2 and GW schemes using local analysis of two-particle density matrices

Due to the presence of non-linear equations, iterative Green’s function methods can result in multiple different solutions even for simple molecular systems. In contrast to the wave-function methods, a detailed and careful analysis of such molecular solutions was not performed before. In this work, we use two-particle density matrices to investigate local spin and charge correlators that quantify the charge resonance and covalent characters of these solutions. When applied within the unrestricted orbital set, spin correlators elucidate the broken symmetry of the solutions, containing necessary information for building effective magnetic Hamiltonians. Based on GW and GF2 calculations of simple molecules and transition metal complexes, we construct Heisenberg Hamiltonians, four-spin-four-center corrections, and biquadratic spin–spin interactions. These Hamiltonian parameterizations are compared to previous wave-function calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗