Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Response of the mode Grüneisen parameters with anisotropic compression: A pressure and temperature dependent Raman study of β-Sn

The lattice dynamic response of body-centered tetragonal beta-Sn (I4 1 /amd) under high-pressure and temperature conditions is determined using experimental optical vibration modes. Here, Raman scattering is used to map the phase stability region of beta-Sn to perform mode Gruneisen analysis, and we demonstrate the necessity of an optical intensity calibration for Raman thermometry. The Gruneisen tensor is evaluated along a set of isotherms to address shortcomings of single-mode Gruneisen parameters with respect to anisotropic deformations of this tetragonal structured soft metal. The changes observed here in the Gruneisen tensor as a function of temperature are related to anharmonicity and denote potential criteria for the onset of premelting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1990

Response of laminated composite flat panels to sonic boom and explosive blast loadings

This paper deals with a theoretical analysis of the dynamic response of shear deformable symmetrically laminated rectangular composite flat panels exposed to sonic boom and explosive blast loadings. The pertinent governing equations incorporating transverse shear deformation, transverse normal stress, as well as the higher-order effects are solved by using the integral-transform technique. The obtained results are compared with their counterparts obtained within the framework of the first-order transverse shear deformation and the classical plate theories and some conclusions concerning their range of applicability are outlined. The paper also contains a detailed analysis of the influence played by the various parameters characterizing the considered pressure pulses as well as the material and geometry of the plate.

Librescu, L.↗
NASA NTRS1957

Experimental and Predicted Longitudinal and Lateral-Directional Response Characteristics of a Large Flexible 35 Degree Swept-Wing Airplane at an Altitude of 35,000 Feet

Measured and predicted dynamic response characteristics of a large flexible swept-wing airplane to control surface inputs are presented for flight conditions of 0.6 to 0.85 Mach number at an altitude of 35,000 feet. The report is divided into two parts. The first part deals with the response of the airplane to elevator control inputs with principal responses contained in a band of frequencies including the longitudinal short-period mode and several symmetrical structural modes. The second part deals with the response of the airplane to aileron and rudder control inputs with principal responses contained in a band of frequencies including the dutch roll mode, the rolling mode, and three antisymmetrical structural modes.

Cole, Henry A , Jr↗
NASA NTRS2010

Frequencies and Flutter Speed Estimation for Damaged Aircraft Wing Using Scaled Equivalent Plate Analysis

Equivalent plate analysis is often used to replace the computationally expensive finite element analysis in initial design stages or in conceptual design of aircraft wing structures. The equivalent plate model can also be used to design a wind tunnel model to match the stiffness characteristics of the wing box of a full-scale aircraft wing model while satisfying strength-based requirements An equivalent plate analysis technique is presented to predict the static and dynamic response of an aircraft wing with or without damage. First, a geometric scale factor and a dynamic pressure scale factor are defined to relate the stiffness, load and deformation of the equivalent plate to the aircraft wing. A procedure using an optimization technique is presented to create scaled equivalent plate models from the full scale aircraft wing using geometric and dynamic pressure scale factors. The scaled models are constructed by matching the stiffness of the scaled equivalent plate with the scaled aircraft wing stiffness. It is demonstrated that the scaled equivalent plate model can be used to predict the deformation of the aircraft wing accurately. Once the full equivalent plate geometry is obtained, any other scaled equivalent plate geometry can be obtained using the geometric scale factor. Next, an average frequency scale factor is defined as the average ratio of the frequencies of the aircraft wing to the frequencies of the full-scaled equivalent plate. The average frequency scale factor combined with the geometric scale factor is used to predict the frequency response of the aircraft wing from the scaled equivalent plate analysis. A procedure is outlined to estimate the frequency response and the flutter speed of an aircraft wing from the equivalent plate analysis using the frequency scale factor and geometric scale factor. The equivalent plate analysis is demonstrated using an aircraft wing without damage and another with damage. Both of the problems show that the scaled equivalent plate analysis can be successfully used to predict the frequencies and flutter speed of a typical aircraft wing.

Krishnamurthy, Thiagarajan↗
DOE OSTI2022

Pressure feedback control of electro-hydraulic actuators using fixed displacement hydraulic machines

This paper presents the development of a control strategy for Electro-Hydraulic Actuator (EHA) systems based on fixed displacement hydraulic machines. Although some previous studies on EHAs show benefits in terms of energy efficiency and regeneration capability compared to conventional hydraulic systems, few studies focus on the dynamic performance of EHAs. Unlike traditional valve-controlled systems, an EHA based on a fixed displacement pump typically relies on variation of the electric motor shaft speed to control the actuator velocity. This study shows that pressure feedback can be used to control the speed of the electric machine, thus achieving the required actuator/machine dynamic response. A simulation model is developed by including the EM, the hydraulic system, and the actuation system, which can give a realistic prediction of the EHA performance for a typical duty cycle. An open-circuit EHA previously proposed by the authors is used to validate the control strategy, and the simulation results show superior dynamic performance, exhibiting a reduction in response time and oscillatory behavior, compared to a feedforward EHA controller. Following the method presented in this study, it is possible to design a controller with a pressure feedback strategy for EHA systems with different size and actuation requirements

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Electrodynamic Shaker Capability Estimation Through Experimental Dynamic Substructuring [Thesis]

Electrodynamic shaker systems are an essential tool in shock and vibration testing of dynamic environments. However, the specific performance capability of these systems is difficult to characterize. The dynamics of the shaker itself, the device under test and the specific test configuration used all couple to create a dynamic response unique to each test. Poorly predicted limitations in shaker capability affect the ability to achieve test specifications, delay testing schedules, and create difficulties for choosing test equipment. To predict shaker capability for a specific test configuration prior to setup, a lumped parameter model of the shaker system and a modal model of a device under test was developed. These models were then analytically coupled using LaGrange multiplier frequency based substructuring to estimate their coupled frequency response functions. The coupled frequency response functions were used to predict electrical inputs required to meet a given test specification. These input requirements were finally compared to a validation test using the specification and setup. Input requirements estimated using the substructuring estimated frequency response functions showed significant error. However, results using an ideal frequency response function showed very little error. These results indicate that with a better method of experimental dynamic substructuring employed it would be possible to accurately predict shaker capability for a given test configuration prior to setup.

42 ENGINEERING↗
NASA NTRS1985

The investigation of tethered satellite system dynamics

Progress in tethered satellite system dynamics research is reported. A retrieval rate control law with no angular feedback to investigate the system's dynamic response was studied. The initial conditions for the computer code which simulates the satellite's rotational dynamics were extended to a generic orbit. The model of the satellite thrusters was modified to simulate a pulsed thrust, by making the SKYHOOK integrator suitable for dealing with delta functions without loosing computational efficiency. Tether breaks were simulated with the high resolution computer code SLACK3. Shuttle's maneuvers were tested. The electric potential around a severed conductive tether with insulator, in the case of a tether breakage at 20 km from the Shuttle, was computed. The electrodynamic hazards due to the breakage of the TSS electrodynamic tether in a plasma are evaluated.

Lorenzini, E.↗
NASA NTRS1991

Mixing processes following the final stratospheric warming

An investigation is made of the dynamics responsible for the mixing and dissolution of the polar vortex during the final stratospheric warmings. The dynamics and transport during a Northern Hemisphere final stratospheric warming are simulated via a GCM and an associated offline N2O transport model. The results are compared with those obtained from LIMS data for the final warming of 1979, with emphasis on the potential vorticity evolution in the two datasets, the modeled N2O evolution, and the observed O3 evolution. Following each warming, the remnants of the originally intact vortex are found to gradually homogenize with the atmosphere at large. Two processes leading to this homogenization are identified following the final warmings, namely, the potential vorticity field becomes decorrelated from that of the chemical tracer, and the vortex remnants begin to tilt dramatically in a vertical direction.

Hess, Peter G.↗
DOE OSTI2020

Role of the Terrestrial Biosphere in Atmospheric Chemistry and Climate

The terrestrial biosphere–atmosphere interface provides a key chemical, biological, and physical lower boundary for the atmosphere. The presence of vegetation itself modifies the physical boundary, or the biogeophysical aspects of the system, by controlling important climate drivers such as soil moisture, light environment, and temperature. The leaf surface area of the terrestrial biosphere provides additional surface area for emissions, and it can be up to 55% of the total Earth’s surface area during the boreal summer. Vegetation also influences the biogeochemical aspects of the system by emitting a broad suite of reactive trace gases such as biogenic volatile organic compound (BVOC) emissions and climate-relevant primary biological aerosol particles (PBAP). Many of these emissions are a function of meteorological and climatological conditions at the surface, including temperature, light environment, soil moisture, and winds. Once emitted, they can be processed in the troposphere through a suite of chemical reactions. BVOC can contribute to the formation of ozone and secondary organic aerosols (SOA), and PBAP can rupture to form smaller particles with climatic relevance. These emissions and subsequent aerosol products can influence atmospheric processes that affect the surface climate, such as the attenuation of radiation, the formation of greenhouse gases such as ozone that can feedback to surface air temperature, and the alteration of clouds and subsequent precipitation. These atmospheric changes can then feedback to the land surface and emissions themselves, creating positive or negative feedback loops that can dampen or amplify the emission response. For the dominant BVOC isoprene, the feedback response to temperature can be positive or negative depending on ambient temperatures that drive isoprene emissions. The feedback response to soil moisture and precipitation can be positive, negative, or uncoupled depending on the moisture content of the soil and the total atmospheric aerosol loading. For light, the isoprene response can be positive or negative depending on the role of diffuse light. Overall, these feedbacks highlight the dynamical response of the biosphere to changing atmospheric conditions across a range of time scales, from minutes for trace gases and aerosols, to months for phenological changes, to years for land cover and land use change. Here, the dynamic aspect of this system requires us to understand, simulate, and predict the complex feedbacks between the biosphere and atmosphere and understand their role in the simulation and understanding of climate and global change. From the observational perspective, these feedbacks are challenging to identify in observations, and predictive modeling tools provide a crucial link for understanding how these feedbacks will change under warming climate scenarios.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1987

A flight investigation of helicopter low-speed response requirements

A flight experiment has been conducted using the Canadian National Aeronautical Establishment's variable-stability airborne simulator to define the dynamic response requirements for operations at hover and low speeds. Fourteen Attitude Command/Attitude Hold, Rate, and Rate Command/Attitude Hold configurations were evaluated by six pilots using both conventional controls and a four-axis integrated sidestick over a low-speed course consisting of precision hover, landing, sidestep, and dash/quickstop tasks. The results indicate that with conventional controls all three response-types were acceptable as long as their response bandwidth was sufficiently high, and higher bandwidths were required in roll than in pitch. With the four-axis sidestick, there was a preference for the Rate systems. The range of acceptable bandwidths was lower, and the spread in pilot ratings smaller, than were found in a similar ground-based simulation.

Mitchell, David G.↗
DOE OSTI2025

Cyanobacteria and Chloroflexota cooperate to structure light-responsive biofilms

Microbial mats are stratified communities often dominated by unicellular and filamentous phototrophs within an exopolymer matrix. It is challenging to quantify the dynamic responses of community members in situ as they experience steep gradients and rapid fluctuations of light. To address this, we developed a binary consortium using two representative isolates from hot spring mats: the unicellular oxygenic phototrophic cyanobacterium Synechococcus OS-B′ (Syn OS-B′) and the filamentous anoxygenic phototroph Chloroflexus MS-CIW-1 (Chfl MS-1). We quantified the motility of individual cells and entire colonies and demonstrated that Chfl MS-1 formed bundles of filaments that moved in all directions with no directional bias to light. Syn OS-B′ was slightly less motile but exhibited positive phototaxis. This binary consortium displayed cooperative behavior by moving further than either species alone and formed ordered arrays where both species aligned with the light source. No cooperative motility was observed when a nonmotile pilB mutant of Syn OS-B′ was used instead of Syn OS-B′. The binary consortium also produced more adherent biofilm than individual species, consistent with the close interspecies association revealed by electron microscopy. We propose that cyanobacteria and Chloroflexota cooperate in forming natural microbial mats by colonizing new niches and building robust biofilms.

Functional and Systems Biology↗
NASA NTRSDate not supplied

Retrospectives: Current State of Knowledge on the Intersection of Spaceflight Stressors and Microbial Risks to Crew and Craft

OVERVIEW The spaceflight environment has several unique stressors that affect the health of both the crew and the spacecraft. An area of continued, albeit incomplete, study is the interaction of these stressors on microbial populations inherent to both astronauts and spacecraft surfaces and systems. A primary concern is the potential for the spaceflight environment to perturb the phenotype of these populations towards negative outcomes for crew and craft. In order to effectively mitigate these potential risks, they must first be characterized. We performed a retrospective literature analysis to assess the current state of knowledge regarding the affects of ionizing radiation and elevated CO2 on relevant microbial populations. The results of these retrospectives will guide next steps in the decisions of what (if any) further studies should be pursued and to guide decisions of the need for countermeasures. STRESSORS Ionizing radiation. The health risk involved with increased exposure to cosmic radiation has been studied in crew for 35+ years, with human health and cancer risk being the main focus. However, space radiation could also affect both the resident microorganisms aboard the ISS and the normal, healthy astronaut microbiomes that are of direct concern for crew health. A retrospective review of over 250 publications was accomplished looking at the impact of cumulative ionizing radiation doses lower than 3 Gy (chronic or acute) on microbial populations. Elevated CO2. The health risk involved with elevated atmospheric CO2 in spacecraft, primarily focusing on human toxicological risks, is understudied. The current Spaceflight Maximum Allowance Concentration for 24-hour average CO2 is 0.4% (3 mm Hg), which is significantly higher than terrestrial levels (0.04%). Whether these elevated ambient CO2 levels aboard spacecraft influence the diversity and phenotypic responses of the resident microbial communities from both the spacecraft environment (air, surface, water) and crew members (gut, nasal, skin microbiomes) is not known. A retrospective review was accomplished looking at the impact of chronic CO2 exposure up to 0.7% (5 mm Hg) for up to 6 months and acute exposure up to 2.6% (20 mm Hg) for up to 24 hours. CONCLUSIONS: MICROBIOME OF THE BUILT ENVIRONMENT The microbiome of the built spacecraft environment has been sampled consistently over the course of human spaceflight and significant advancements have been made in identifying microbial populations on the ISS. The dominant source of microbes on spacecraft surfaces are human-derived. Once in the spacecraft built environment, the extreme environment selects for features that enhance survival. While efforts to understand potential antibiotic resistance and pathogenicity of ISS isolates is robust, there is little to no understanding of which spaceflight environmental stressors, to include ionizing radiation or elevated CO2, drive the evolutionary trajectory of spacecraft-associated microbial populations. CONCLUSIONS: MICROBE-HOST INTERACTIONS The host-microbiome field has emerged as an important factor in human health on Earth as well in spaceflight. The field is struggling with the complexity of the system under investigation as there is substantial taxonomic and functional heterogeneity in these communities, making it difficult to establish clear stimulus-response dynamics. Taxonomic characterization is the norm; however, the functional role of each community member is key to linking environmental perturbations to potential dysbiosis. For both ionizing radiation and elevated CO2, the likely target of the perturbation is the host tissue, not the microbes themselves.. Any resulting changes to the microbial community composition and/or function is likely a result of adapting to those changes in the host physiology. RECOMMENDATIONS Emphasize functional characterization as opposed to taxonomic characterization of microbial communities. Increase the number of investigations using chronic, spaceflight-relevant doses of ionizing radiation. MoBE studies should move away from observational studies towards predictive modeling of community dynamics. Continue to develop scale-down models, such as tissues-on-a-chip & defined microbial communities. Focus on the crew response to elevated CO2 over MoBE considerations. Assess how direct contact with the hypercapnic environment affects skin microbiome dynamics.

retrospective↗
DOE OSTI2024

Tailored ultrasound propagation in microscale metamaterials via inertia design

The quasi-static properties of micro-architected (meta)materials have been extensively studied over the past decade, but their dynamic responses, especially in acoustic metamaterials with engineered wave propagation behavior, represent a new frontier. However, challenges in miniaturizing and characterizing acoustic metamaterials in high-frequency (megahertz) regimes have hindered progress toward experimentally implementing ultrasonic-wave control. Here, we present an inertia design framework based on positioning microspheres to tune responses of 3D microscale metamaterials. We demonstrate tunable quasi-static stiffness by up to 75% and dynamic longitudinal-wave velocities by up to 25% while maintaining identical material density. Using noncontact laser-based dynamic experiments of tunable elastodynamic properties and numerical demonstrations of spatio-temporal ultrasound wave propagation, we explore the tunable static and elastodynamic property relation. This design framework expands the quasi-static and dynamic metamaterial property space through simple geometric changes, enabling facile design and fabrication of metamaterials for applications in medical ultrasound and analog computing.

42 ENGINEERING↗
NASA NTRS1980

Analyses and tests of the B-1 aircraft structural mode control system

Analyses and flight tests of the B-1 structural mode control system (SMCS) are presented. Improvements in the total dynamic response of a flexible aircraft and the benefits to ride qualities, handling qualities, crew efficiency, and reduced dynamic loads on the primary structures, were investigated. The effectiveness and the performance of the SMCS, which uses small aerodynamic surfaces at the vehicle nose to provide damping to the structural modes, were evaluated.

Wykes, J. H.↗
NASA NTRS1981

Fundamental aspects in the quantitative ultrasonic determination of fracture toughness: General equations

The problem of establishing a theoretical groundwork for experimentally-found correlations between ultrasonic and fracture toughness factors in polycrystalline metals is discussed. It is noted that the link between these material properties and ultrasonic factors are the microstructural parameters that interact with stress wave propagation during deformation and fracture. The dynamic response of material inhomogeneities and the strains and displacements they undergo under incident stress waves are considered. Dynamic strains and displacements inside and outside scatterers are treated. The underlying approach, the formulation and governing equations for the eigenstrains, and the determination of the energy due to the presence of inhomogeneities are presented. The stress wave interaction problem is presented in terms of the dynamic eigenstrain concept.

Fu, L. S.↗
NASA NTRS1986

Vibration of a large space beam under gravity effect

The structural characteristics of a large simply supported beam subjected to gravity are described. The nonlinear governing equations for both the static and the dynamic response are derived and solved analytically. The results show the feasibility of verifying the on-orbit dynamic characteristics of a large space beam by utilizing ground test data of such a structure. It is noted that the gravity effect interacts mostly with the first vibration mode. It was also found that the system of a large space beam subjected to its own weight is a hardening system. The differential equation for the asymmetric mode is a Duffing type equation. However, the governing equation for the symmetric mode has an additional quadratic term. It is this term that causes the maximum vibration amplitudes at different phases to be non-identical.

Shih, C.-F.↗
NASA NTRS2015

Creep Burst Testing of a Woven Inflatable Module

A woven Vectran inflatable module 88 inches in diameter and 10 feet long was tested at the NASA Johnson Space Center until failure from creep. The module was pressurized pneumatically to an internal pressure of 145 psig, and was held at pressure until burst. The external environment remained at standard atmospheric temperature and pressure. The module burst occurred after 49 minutes at the target pressure. The test article pressure and temperature were monitored, and video footage of the burst was captured at 60 FPS. Photogrammetry was used to obtain strain measurements of some of the webbing. Accelerometers on the test article measured the dynamic response. This paper discusses the test article, test setup, predictions, observations, photogrammetry technique and strain results, structural dynamics methods and quick-look results, and a comparison of the module level creep behavior to the strap level creep behavior.

Selig, Molly M.↗