Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffractive production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Synthesis and characterization of iron orthophosphate by solution combustion method

Graphical abstract: Display Omitted Highlights: ► Solution combustion synthesis was firstly employed to prepare FePO{sub 4}. ► Pure, well-crystallized and porous FePO{sub 4} was obtained and characterized. ► The results proved SCS a time saving and practically applicable method. -- Abstract: The present work applies solution combustion synthesis (SCS) by employing glycine as organic fuel to stimulate the synthesis of pure iron orthophosphate with well-defined reaction parameters. The structural and morphological properties of the products were characterized and confirmed by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and surface analyzer, respectively. Thermal behaviors were also investigated by TG/DT analyses. The optimal condition was set at 500 °C in a few minutes, giving pure iron orthophosphate with a good level of crystallinity and 11,769 m{sup 2}/g surface area. The results proved SCS a time saving and practically applicable method.

36 MATERIALS SCIENCE↗

La-doped ZnO nanoparticles: Simple solution-combusting preparation and applications in the wastewater treatment

Graphical abstract: La-doped ZnO nanoparticles have been successfully prepared by a simple solution combustion route and exhibit good adsorption for Cu and Pb ion from water systems. - Highlights: • La-doped ZnO nanoparticles were successfully prepared via a simple solution-combustion route. • The integration of La{sup 3+} ions into ZnO decreased the band-gap of ZnO nanoparticles. • La-doped ZnO nanoparticles could remove more Pb and Cu ions from water resources than undoped ZnO. - Abstract: La-doped ZnO nanoparticles have been successfully synthesized by a simple solution combustion method via employing a mixture of ethanol and ethyleneglycol (v/v = 60/40) as the solvent. Zinc acetate and oxygen gas in the atmosphere were used as zinc and oxygen sources, and La(NO{sub 3}){sub 3} as the doping reagent. The as-obtained product was characterized by means of powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry and X-ray photoelectron spectroscopy. Experiments showed that La-doped ZnO nanoparticles exhibited the higher capacities for the removal of Pb{sup 2+} and Cu{sup 2+} ions in water resource than undoped ZnO nanoparticles.

36 MATERIALS SCIENCE↗

Eu 2+ -doped M 2 SiO 4 (M = Ca, Ba) phosphors prepared by a rapid microwave-assisted sol-gel method: Phase formation and optical properties

We present a rapid microwave-assisted approach for the preparation of Eu 2+ -doped orthosilicate phosphors. The preparation method relies on a citrate based sol–gel reaction with subsequent combustion in a domestic microwave oven, in contrast to more conventional solid-state methods. This sol–gel pathway yields phase pure, high quality orthosilicates, in less than 25 min of final heating time. In addition, superior morphology control is achieved employing the sol–gel method compared to solid-state preparations. In order to understand the formation process of the final products, thermogravimetric analyses and temperature-dependent X-ray diffraction data were acquired and compared to the conventional solid-state preparation. The morphology and elemental composition of the obtained luminescent materials were investigated using scanning electron microscopy and energy-dispersive X-ray spectroscopy. The optical properties were elucidated by measuring room-temperature emission and excitation spectra, and the application and efficiency of the obtained phosphors in LED devices was studied.

Birkel, Alexander↗

Structural and Electrochemical Characteristics of Ca-Doped “Flower-like” Li 4 Ti 5 O 12 Motifs as High-Rate Anode Materials for Lithium-Ion Batteries

Doped motifs offer an intriguing structural pathway toward improving conductivity for battery applications. Specifically, Ca-doped, three-dimensional “flower-like” Li 4–x Ca x Ti 5 O 12 (“x” = 0, 0.1, 0.15, and 0.2) micrometer-scale spheres have been successfully prepared for the first time using a simple and reproducible hydrothermal reaction followed by a short calcination process. The products were experimentally characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) mapping, inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge–discharge testing. Calcium dopant ions were shown to be uniformly distributed within the LTO structure without altering the underlying “flower-like” morphology. The largest lattice expansion and the highest Ti 3+ ratios were noted with XRD and XPS, respectively, whereas increased charge transfer conductivity and decreased Li + -ion diffusion coefficients were displayed in EIS for the Li 4–x Ca x Ti 5 O 12 (“x” = 0.2) sample. The “x” = 0.2 sample yielded a higher rate capability, an excellent reversibility, and a superior cycling stability, delivering 151 and 143 mAh/g under discharge rates of 20C and 40C at cycles 60 and 70, respectively. In addition, a high cycling stability was demonstrated with a capacity retention of 92% after 300 cycles at a very high discharge rate of 20C. In addition, first-principles calculations based on density functional theory (DFT) were conducted with the goal of further elucidating and understanding the nature of the doping mechanism in this study. The DFT calculations not only determined the structure of the Ca-doped Li 4 Ti 5 O 12 , which was found to be in accordance with the experimentally measured XPD pattern, but also yielded valuable insights into the doping-induced effect on both the atomic and electronic structures of Li 4 Ti 5 O 12 .

25 ENERGY STORAGE↗

Solid-State Transformation of Uranyl Peroxide Materials through High-Level Irradiation

The solid-state transformation of sodium uranyl triperoxide (Na 4 (UO 2 )(O 2 ) 3 ·9H 2 O, NaUT) to sodium uranyl tricarbonate (Na 4 (UO 2 )(CO 3 ) 3 ) by radiolysis was observed for the first time. The exposure of NaUT to 3 MGy gamma irradiation resulted in partial breakdown of the peroxides forming a mixed peroxide and carbonate species. The effects of He-ion irradiation on NaUT were also investigated up to 225 MGy using both hydrated argon and dry argon. The complete conversion to the uranyl tricarbonate phase by 56 MGy was done using hydrated argon, while dry argon did not fully convert showing the importance of water in the system. He-ion irradiated NaUT samples all convert to the tricarbonate phase with time in air post radiation exposure. This transition was monitored via Raman spectroscopy, infrared spectroscopy (IR), and powder X-ray diffraction (PXRD) to further confirm the identity of the final product as the sodium uranyl tricarbonate, čejkaite. Furthermore, this transformation outlines a mechanism for the mobility of uranyl in natural environments and in the Hanford tanks.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Status of the AFP project in the ATLAS experiment

Status of the AFP project in the ATLAS experiment is summarized. The AFP system is composed of a tracker to detect intact, diffractively scattered protons, and of a time-of-flight detector serving to suppress background from pile-up interactions. The whole system, located around 210 m from the main ATLAS detector, is placed in Roman Pots which move detectors from and to the incident proton beams. A typical distance of the closest approach of the tracker to these beams is 2–3 mm. The main physics motivation lies in measuring diffractive processes in runs with not a very high amount of pile-up.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Structure and particle size analysis of LaFeO{sub 3} nanoparticles

Particle size analysis of LaFeO{sub 3} nanoparticles has been done through different methods. A simple low temperature syntheses of LaFeO{sub 3}-NPs were carried out via PVA based sol-gel method. The role of PVA in this method is complexing agent. The product were characterized with the help of X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), and Transmission Electron Microscopy (TEM). The Rietveld refinement on X-ray diffraction peaks have been done in order to calculate various structural parameters. The Scherrer method was applied to calculate the crystallite size. Further, the crystallite size and associated lattice strain of LaFeO{sub 3}-NPs were studied using Williamson-Hallmethod. The FESEM image shows the presence of spherical morphology. The formation of LaFeO{sub 3} nanoscale particles, with their size, has been confirmed by TEM characterization.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Neutron inelastic scattering and reactions in natural Pb as a background in neutrinoless double-{beta}-decay experiments

Inelastic neutron scattering and reactions on Pb isotopes can result in {gamma} rays near the signature end-point energy in a number of {beta}{beta} isotopes. In particular, there are {gamma}-ray transitions in {sup 206,207,208}Pb that might produce energy deposits at the {sup 76}GeQ{sub {beta}}{sub {beta}} in Ge detectors used for 0{nu}{beta}{beta} searches. The levels that produce these {gamma} rays can be excited by (n,n{sup '}{gamma}) or (n,xn{gamma}) reactions, but the cross sections are small and previously unmeasured. This work uses the pulsed neutron beam at the Los Alamos Neutron Science Center to directly measure reactions of interest to {beta}{beta}-decay experiments. The cross section on {sup nat}Pb to produce the 2041-keV {gamma} ray from {sup 206}Pb is measured to be 3.6 {+-} 0.7 (stat.) {+-} 0.3 (syst.) mb at {approx_equal}9.6 MeV. The cross section on {sup nat}Pb to produce the 3061,3062-keV {gamma} rays from {sup 207}Pb and {sup 208}Pb is measured to be 3.9 {+-} 0.8 (stat.) {+-} 0.4 (syst.) mb at the same energy. We report cross sections or place upper limits on the cross sections for exciting some other levels in Pb that have transition energies corresponding to Q{sub {beta}}{sub {beta}} in other {beta}{beta} isotopes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Exploring orbital angular momentum and spin-orbit correlations for gluons at the Electron-Ion Collider

In our previous work [S. Bhattacharya , ], we introduced a pioneering observable aimed at experimentally detecting the orbital angular momentum (OAM) of gluons. Our focus was on the longitudinal double spin asymmetry observed in exclusive dijet production during electron-proton scattering. We demonstrated the sensitivity of the cos ϕ angular correlation between the scattered electron and proton as a probe for gluon OAM at small x and its intricate interplay with gluon helicity. This current work provides a comprehensive exposition, diving further into the aforementioned calculation with added elaboration and in-depth analysis. We reveal that, in addition to the gluon OAM, one also gains access to the spin-orbit correlation of gluons. We supplement our work with a detailed numerical analysis of our observables for the kinematics of the Electron-Ion Collider. In addition to dijet production, we also consider the recently proposed semi-inclusive diffractive deep inelastic scattering process, which potentially offers experimental advantages over dijet measurements. Finally, we investigate quark-channel contributions to these processes and find an unexpected breakdown of collinear factorization. Published by the American Physical Society 2025

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Fabrication and characterization of a full-size ultra-precise lamellar grating for the Cosmic beamline at ALS-U

We have developed a new process for the production of ultra-precise variable line spacing (VLS) lamellar diffraction gratings through nanofabrication. The process enables the fabrication of full-size X-ray gratings with sub-nanometre accuracy in groove depth, an optimal land-to-groove ratio, and uniform groove depth across the entire grating area. We also established a method for evaluating VLS groove density variation using stitched Fizeau interferometry. The measurements confirmed the exceptionally high accuracy of the VLS groove density in the fabricated gratings, which is well within the specification tolerances while the residual groove density errors are vanishingly small. The gold-coated grating demonstrated near-theoretical diffraction efficiency across the energy range of 100–1200 eV.

36 MATERIALS SCIENCE↗

An Effective Approach to the Synthesis of Nanocrystalline PbMoO{sub 4} in Na{sub 2}Mo{sub 4}O{sub 13}–PbCO{sub 3} Melts

This paper presents thermodynamic analysis of reactions of sodium tetramolybdate with Pb{sub 3}O{sub 4}, PbO{sub 2}, PbO, and lead carbonate and describes an effective approach to PbMoO{sub 4} synthesis in melts of the Na{sub 2}Mo{sub 4}O{sub 13}–PbCO{sub 3} system, which offers a low synthesis temperature, waste-free character of the process, high rate, and high yield of a reagent-grade synthesis product in a nanocrystalline state. The synthesis product has been identified by chemical analysis, X-ray diffraction, and particle size measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Oxygen Reduction on Platinum-Nickel and Platinum-Cobalt Alloy Based Catalysts for High Temperature Proton Exchange Membrane Fuel Cells

Catalyst layers, with commercial PtNi/TKK (TECNiE52; platinum 46.5 wt%), PtCo/TKK (TEC36E52; platinum 45.8 wt%) catalysts, and an in-house catalyst PtNi-NC (platinum 38.4 wt%), synthesised using acoustic mixer and a tube furnace, are prepared using three different ionomers: 20 wt% Nafion®, 60 wt% polytetrafluoroethylene (PTFE), and an in-house 5 wt% ionomer (‘Ionomer X’). These inks are bar-coated onto carbon paper gas diffusion layers (GDLs), which are cut into 3 cm × 5 cm pieces. The coated layers are tested for oxygen reduction in a commercial gas diffusion electrode (GDE) test cell, FlexCell® (Gaskatel GmbH, Germany), using 85 wt% phosphoric acid at both room temperature and at 155°C. This study evaluates the polynorbornene (PNB)-based in-house ionomer performance as binder and in-house catalyst oxygen reduction reaction (ORR) activity in comparison to commercial products. The catalyst layers are characterised using X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy (XPS), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Among the catalyst layers prepared with PTFE ionomer and tested at 155°C, the in-house catalyst demonstrates the highest ORR activity. Ionomer X proves to be a good candidate to be used as a per- and polyfluoroalkyl-free binder for high-temperature (HT) proton exchange membrane fuel cell (PEMFC) applications.

85 wt% phosphoric acid↗

Synthesis and Crystal Structures of Volatile Neptunium(IV) β- Diketonates

Production of certified reference materials in support of domestic nuclear forensics programs require volatile precursors for introduction into electromagnetic isotopic separation instruments. β-diketone chelates of tetravalent actinides are known for their high volatility, but previously developed synthetic approaches require starting material (NpCl 4 ) that is prohibitively difficult and hazardous to prepare. An alternative strategy was developed here that uses controlled potential electrolysis to reduce neptunium to the tetravalent state in submolar concentrations of hydrochloric acid. Four different β-diketone ligands of varying degrees of fluorination were reacted with an aqueous solution of Np 4+ . Products of this reaction were characterized via X-ray diffraction and infrared spectroscopy, and were found to be neutral 8-coordinate complexes that adopt square antiprismatic crystal geometry. Synthesis of Np β-diketonates by this approach circumvents the necessity of using NpCl 4 in tetravalent Np coordination compound synthesis. The volatility of the complexes was assessed using thermogravimetric analysis, where the temperature of sublimation was determined to be in the range of 180° to 205° C. The extent of fluorination did not appreciably alter the sublimation temperature of the complex. Thermal decomposition of these compounds was not observed during sublimation. High volatility and thermal stability of Np β-diketonates make them an ideal candidate for gaseous introduction into isotopic separation instruments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid-state transformation of uranyl peroxide materials through high-level irradiation

The solid-state transformation of sodium uranyl triperoxide (Na 4 (UO 2 )(O 2 ) 3 ∙9H 2 O, NaUT) to sodium uranyl tricarbonate (Na 4 (UO 2 )(CO 3 ) 3 ) by radiolysis has been observed for the first time. The exposure of NaUT to 3 MGy gamma irradiation resulted in partial breakdown of the peroxides forming a mixed peroxide and carbonate species. The effects of He ion irradiation on NaUT was also investigated up to 225 MGy using both hydrated argon and dry argon. The complete conversion to the uranyl tricarbonate phase by 56 MGy using hydrated argon, while dry argon did not fully convert showing the importance of water in the system. He-ion irradiated NaUT samples all convert to the tricarbonate phase with time in air post radiation exposure. This transition was monitored via Raman spectroscopy, infrared spectroscopy (IR), and powder X-ray diffraction (PXRD) to further confirm the identity of the final product as the sodium uranyl tricarbonate, čejkaite. This transformation outlines a mechanism for the mobility of uranyl in natural environments and in the Hanford tanks.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Zeolite formation from coal fly ash and its adsorption potential

The possibility in converting coal fly ash (CFA) to zeolite was evaluated. CFA samples from the local power plant in Prachinburi province, Thailand, were collected during a 3-month time span to account for the inconsistency of the CFA quality, and it was evident that the deviation of the quality of the raw material did not have significant effects on the synthesis. The zeolite product was found to be type X. The most suitable weight ratio of sodium hydroxide (NaOH) to CFA was approximately 2.25, because this gave reasonably high zeolite yield with good cation exchange capacity (CEC). The silica (Si)-to-aluminum (Al) molar ratio of 4.06 yielded the highest crystallinity level for zeolite X at 79% with a CEC of 240 meq/100 g and a surface area of 325 m{sup 2}/g. Optimal crystallization temperature and time were 90{sup o}C and 4 hr, respectively, which gave the highest CEC of approximately 305 meq/100 g. Yields obtained from all experiments were in the range of 50-72%. 29 refs., 5 tabs., 7 figs.

01 COAL, LIGNITE, AND PEAT↗

Thermodynamics and kinetics of the sulfation of porous calcium silicate

The sulfation of plasma sprayed calcium silicate in flowing SO2/air mixtures at 900 and 1000 C was investigated thermogravimetrically. Reaction products were analyzed using electron microprobe and X-ray diffraction analysis techniques, and results were compared with thermodynamic predictions. The percentage, by volume, of SO2 in air was varied between 0.036 and 10 percent. At 10 percent SO2 the weight gain curve displays a concave downward shoulder early in the sulfation process. An analytical model was developed which treats the initial process as one which decays exponentially with increasing time and the subsequent process as one which decays exponentially with increasing weight gain. At lower SO2 levels the initial rate is controlled by the reactant flow rate. At 1100 C and 0.036 percent SO2 there is no reaction, in agreement with thermodynamic predictions.

Miller, R. A.↗

One-step synthesis of dithiocarbamates from metal powders

Neutral metal dithiocarbamate complexes (M(NR2CS2)X) are well-known precursors to metal sulfides, a class of materials with numerous technological applications. We are involved in a research effort to prepare new precursors to metal sulfides using simple, reproducible synthetic procedures. We describe the results of our synthetic and characterization studies for M = Fe, Co, Ni, Cu. and In. For example, treatment of metallic indium with tetramethylthiuram disulfide (tmtd) in 4-methylpyridine (4-Mepy) at 25 deg C produces a new homoleptic indium (III) dithiocarbamate, In(N(CH3)2CS2)3(I), in yields of over 60 percent. The indium (III) dithiocarbamate was characterized by X-ray crystallography; (I) exists in the solid state as discrete distorted-octahedral molecules. Compound (I) crystallizes in the P1bar (No. 2) space group with lattice parameters: a = 9.282(1) A, b = 10.081(1) A, c = 12.502 A, alpha = 73.91(1) deg, beta = 70.21(1) deg, gamma = 85.8(1)deg, and Z = 2. X-ray diffraction and mass spectral data were used to characterize the products of the analogous reactions with Fe, Co, Ni, and Cu. We discuss both use of dithiocarbamates as precursors and our approach to their preparation.

Hepp, Aloysius F.↗

Oxidation of TaSi2-Containing ZrB2-SiC Ultra-High Temperature Materials

Hot pressed coupons of composition ZrB2-20 v% SiC-5 v% TaSi2 and ZrB2-20 v% SiC-20 v% TaSi2 were oxidized in stagnant air at temperatures of 1627 and 1927C for one, five and ten 10-minute cycles. The oxidation reactions were characterized by weight change kinetics, x-ray diffraction, and SEM/EDS. Detailed WDS/microprobe quantitative analyses of the oxidation products were conducted for the ZrB2-20 v% SiC-20 v% TaSi2 sample oxidized for five 10-minute cycles at 1927C. Oxidation kinetics and product formation were compared to ZrB2-20 v% SiC with no TaSi2 additions. It was found that the 20 v% TaSi2 composition exhibited improved oxidation resistance relative to the material with no TaSi2 additions at 1627C. However, for exposures at 1927C less oxidation resistance and extensive liquid phase formation were observed compared to the material with no TaSi2 additions. Attempts to limit the liquid phase formation by reducing the TaSi2 content to 5 v% were unsuccessful. In addition, the enhanced oxidation resistance at 1627C due to 20 v% TaSi2 additions was not achieved at the 5 v% addition level. The observed oxidation product evolution is discussed in terms of thermodynamics and phase equilibria for the TaSi2-containing ZrB2-SiC material system. TaSi2-additions to ZrB2-SiC at any level are not recommended for ultra-high temperature (>1900C) applications due to excessive liquid phase formation.

Opila, Elizabeth J.↗