Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIPS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

RS-232 communications analyzer module for HP-1602A logic analyzer

The design and construction of a simple ASCII analyzer is described. It was built to interface directly to a Hewlett-Packard 1602A logic state analyzer but the circuitry could easily be configured to operate with any logic analyzer. The design of the ASCII analyzer allows the use of all the trace and delay functions for the HF-1602A. The ASCII analyzer circuit utilizes two universal Asynchronous Receiver/Transmitters (UAR/Ts) to simultaneously examine both the transmit and receive serial data lines. Baud rates from 300 to 9600 bits per second are selectable with the externally mounted DIP switch. The unit requires no external power supply connection and all of the integrated circuits are CMOS for low power consumption.

Yost, S. R.↗

Thin wire pointing method

A method is described for forming sharp tips on thin wires, in particular phosphor bronze wires of diameters such as one-thousandth inch used to contact micron size Schottky barrier diodes, which enables close control of tip shape and which avoids the use of highly toxic solutions. The method includes dipping an end of a phosphor bronze wire into a dilute solution of sulfamic acid and applying a current through the wire to electrochemically etch it. The humidity in the room is controlled to a level of less than 50%, and the voltage applied between the wire and another electrode in the solutions is a half wave rectified voltage. The current through the wire is monitored, and the process is stopped when the current falls to a predetermined low level.

Green, G.↗

Constraints on the expansion of Ganymede and the thickness of the lithosphere

Since grooved terrain has formed from extensional faulting of at least one half of the surface of Ganymede, grooves may be due to planetary expansion which can be constrained by determining the extension associated with groove formation. The geometry and kinematics of a fault or group of faults must be known in order to determine the extension. Although neither of these is known for grooves on Ganymede, geologically reasonable end members of the dip, displacement and extension of faults which bound the graben can be estimated in order to place valuable constraints on possible surface area and radius increases as well as on the thickness of the Ganymede lithosphere. Minimum lithosphere thickness is estimated to be 5 km in the Marius and 9 km in the Galileo regions, at the time of furrow formation, and 4 km at the time of groove formation.

Golombek, M. P.↗

Active-region evolution and solar rotation variations in solar UV irradiance, total solar irradiance, and soft X rays

Variations in the total solar irradiance, solar UV spectral irradiance, and solar soft X-ray emission caused by active region evolution and solar rotation are analyzed by using concurrent measurements from the NIMBUS 7 and GOES satellites. The observations are interpreted by using simple empirical models that relate ground-based observations of the size and location of sunspots and plages to the full-disk temporal variations. It is found that the major dips in the photospheric total solar irradiance S, which are evident in both satellite measurements and model predictions, are usually not accompanied by outstanding enhancements in the chromospheric and upper photospheric UV spectral irradiance or coronal X rays. The main cause of this difference between the variability of S and of the UV flux is that the total chromospheric plage enhancements are not outstanding at those times when the total sunspot are outstanding. X rays are even more variable because of a much wider CMD sensitivity.

Donnelly, R. F.↗

H0323 + 022 - A puzzling high-latitude X-ray/optical/radio source

HEAO 1 has located a flaring X-ray source, H0323 + 022, at high galactic latitude. This source is identified with a V = 16.5 UV-excess object. While the counterpart has been observed on two occasions to have zero redshift absorption lines, these features have been absent on at least five other occasions. The high IR flux of the object indicates a multicomponent source. Einstein Observatory observations indicate that the X-ray source has two components, a steady soft component and a variable hard one which exhibits a pronounced 60-sec dip, as well as flaring activity, on time scales as small as six hours. A 5 GHz detection of the source, with a flux density of 41 + or - 1 mJy, has also been made by Feigelson et al (1982).

Doxsey, R.↗

A two-component X-ray spectrum from SMC X-1

HEAO 1 A-2 and Einstein Solid State Spectrometer (SSS) observations of SMC X-1 are presented. An unpulsed soft component is found with a blackbody temperature of 0.16 keV and an area for the emission region of 10 to the 15th to 10 to the 17th sq cm. The hard X-ray component is pulsed; the phase-averaged spectrum is a power law with alpha of about 0.5 up to 17 keV, above which it steepens. The SSS sets an upper limit of less than 4 x 10 to the 21st H/sq cm to any absorption, and is consistent with that expected from the wind of Sk 160. Absorption dips with a timescale of several hundred seconds are seen immediately following an eclipse exit, and are probably caused by inhomogeneities in the wind of Sk 160.

Marshall, F. E.↗

Theoretical modeling of low-latitude Mg

The appearance of metal ions at altitudes near 100 km has long been known. The interest in metal ions arises from the contributions they can make towards understanding atmospheric dynamics. A description is presented of the results of a theoretical investigation of Mg(+) using an ionospheric model which incorporates realistic geomagnetic and electric fields. In particular, longitudinal effects can be included. The data base for comparison is the altitude profiles and latitude-local time cross sections of Mg(+) densities at fixed altitudes from the Visual Airglow Experiment on Atmospheric Explorer 'E' (AE-E), which was in equatorial orbit. Mg(+) number densities were found as functions of dip latitude, altitude, and local time in three longitudinal regions.

Fesen, C. G.↗

Flutter analysis of a transport wing using XTRAN3S

As part of the continuing process of evaluating and validating the XTRAN3S unsteady transonic aerodynamic computer program, the code has been applied to the flutter analysis of a transport type wing. The configuration analyzed was an aspect ratio 8 wing with a taper ratio of 0.4, a quarter chord sweep of 20 degrees and a NACA 65A-012 airfoil section. The analytical results compare well with the experimental flutter boundary and exhibit the classical 'transonic dip'. A literature search of available transport wing transonic flutter data is included.

Myers, M. R.↗

ANS spectrophotometry - Delta Pictoris as an upper-main-sequence algol system

The early-type eclipsing binary Delta Pictoris has been studied with 260 observations in each of five UV bands. These are the most accurate observations to date, and no strong evidence for light-curve complications produced by circumstellar material has been found. Combined light curves from four epochs separated by intervals of six months do not show any strong dips or shoulders as seen in earlier investigations. The strength of th C IV wavelength 1550 line is independent of phase to better than 0.01 m. The root-mean-square scatterer shown by the light curves ranges from 0.006 m to 0.014 and may be evidence that either or both of the components are intrinsically variable. The integrated colors of the system are consistent with a B1 V spectral type and very little interstellar extinction. A detached solution of the light curves for a Roche model well with the spectroscopic mass ratio, but a semidetached solution cannot be ruled out.

Eaton, J. A.↗

Sorting Titanium Welding Rods

Three types of titanium welding wires identified by their resistance to current flow. Welding-wire tester quickly identifies unknown titaniumalloy wire by touching wire with test probe, and comparing meter response with standard response. Before touching wire, tip of test probe dipped into an electrolyte.

Ross, W. D., Jr.↗

A Kosloff/Basal method, 3D migration program implemented on the CYBER 205 supercomputer

Conventional finite difference migration has relied on approximations to the acoustic wave equation which allow energy to propagate only downwards. Although generally reliable, such approaches usually do not yield an accurate migration for geological structures with strong lateral velocity variations or with steeply dipping reflectors. An earlier study by D. Kosloff and E. Baysal (Migration with the Full Acoustic Wave Equation) examined an alternative approach based on the full acoustic wave equation. The 2D, Fourier type algorithm which was developed was tested by Kosloff and Baysal against synthetic data and against physical model data. The results indicated that such a scheme gives accurate migration for complicated structures. This paper describes the development and testing of a vectorized, 3D migration program for the CYBER 205 using the Kosloff/Baysal method. The program can accept as many as 65,536 zero offset (stacked) traces.

Pyle, L. D.↗

Workshop on a Cross Section of Archean Crust

Various topics relevant to crustal genesis, especially the relationship between Archean low - and high-grade terrains, were discussed. The central Superior Province of the Canadian Shield was studied. Here a 120 km-wide transition from subgreenschist facies rocks of the Michipicoten greenstone belt to granulite facies rocks of the Kapuskasing structural zone represents an oblique cross section through some 20 km of crust, uplifted along a northwest-dipping thrust fault.

Ashwal, L. D.↗

Ground-based Measurements of Solar Irradiance Variations

Observations and analysis programs being carried out at the San Fernando Observatory are reviewed. A digital analysis of sunspot areas from full disk photographs shows an especially good correlation with areas published in the Solar Geophysical Data Bulletin with scale factor near unity. Results are presented from photoelectric photometry of active regions using the Extreme Limb Photometer. These results suggest energy balance between sunspots and faculae. Preliminary results are presented from a new program of photoelectric photometry using a linear array of diodes. Results are presented for the August 1982 passage of a large active region. This active region caused a maximum dip in the quiet Sun irradiance of about 800 parts per million.

Chapman, G. A.↗

Temporal Variations of Solar UV Spectral Irradiance Caused by Solar Rotation and Active Region Evolution

Variations in the solar 100 to 400 nm UV spectral irradiance caused by solar rotation and active region evolution, are discussed as a function of UV wavelength, CMD dependence, and in relation to the temporal variations in the total solar irradiance, 10.7 cm radio flux, sunspot number and Ca K plage data. Active region radiation at cm wavelengths includes a component proportional to the magnetic field. Active region evolution involves a more rapid growth, peak and decay of sunspots and their strong magnetic fields than the Ca K plages and their related UV enhancements. Major plages often last a rotation or more longer than the active region's sunspots. Large active regions, including those associated with major dips in the total solar irradiance, tend to produce the strongest peaks in 10.7 cm and sunspot numbers on their first rotation, while the Ca K plages and UV enhancements peak on the next rotation and decay more slowly on subsequent rotations. Differences in CMD dependencies cause temporal differences including the stronger presence of 13 day variations in the UV flux.

Donnelly, R. F.↗

Andean tectonics: Implications for Satellite Geodesy

Current knowledge and theories of large scale Andean tectonics as they relate to site planning for the NASA Crustal Dynamics Program's proposed high precision geodetic measurements of relative motions between the Nazca and South American plates are summarized. The Nazca Plate and its eastern margin, the Peru-Chile Trench, is considered a prototype plate marked by rapid motion, strong seismicity and well defined boundaries. Tectonic activity across the Andes results from the Nazca Plate subducting under the South American plate in a series of discrete platelets with different widths and dip angles. This in turn, is reflected in the tectonic complexity of the Andes which are a multitutde of orogenic belts superimposed on each other since the Precambrian. Sites for Crustal Dynamics Program measurements are being located to investigate both interplate and extraplate motions. Observing operations have already been initiated at Arequipa, Peru and Easter Island, Santiago and Cerro Tololo, Chile. Sites under consideration include Iquique, Chile; Oruro and Santa Cruz, Bolivia; Cuzco, Lima, Huancayo and Bayovar, Peru; and Quito and the Galapagos Islands, Ecuador. Based on scientific considerations, Santa Cruz, Huancayo (or Lima), Quito and the Galapagos Islands should be replaced by Isla San Felix, Chile; Brazilia or Petrolina, Brazil; and Guayaquil, Ecuador. If resources permit, additional important sites would be Buenaventura and Villavicencio or Puerto La Concordia, Colombia; and Mendoza and Cordoba, Argentina.

Allenby, R. J.↗

The rings of Uranus - Occultation profiles from three observatories

Occultation profiles for the nine confirmed Uranian rings obtained from Las Campanas, the European Southern Observatory, and Cerro Tololo on 15-16 August 1980 are compared. The alpha ring shows a 'double-dip' structure; the eta ring shows a broad and narrow component (similar to Saturn's F ring); and the epsilon ring shows six features that appear in the data from all three observatories. Diffraction fringes appear at the edges of several of the occultation profiles.

Elias, J. H.↗

The birthline for low-mass stars

Using the results of protostar theory, the locus in the Hertzsprung-Russell diagram is found where pre-main-sequence stars of subsolar mass should begin their quasi-static contraction phase and first appear as visible objects. This 'birthline' is in striking agreement with observations of T Tauri stars, providing a strong confirmation of the fact that these stars are indeed contracting along Hayashi tracks. The assumption that most T Tauri stars first appear along this line forces a recalibration of their ages. This recalibration removes the puzzling dip in present-day star formation seen in age histograms of several cloud complexes. Since the underlying protostar calculation assumes that the parent cloud was only thermally supported prior to its collapse, the observed location of the birthline places severe restrictions on the degree of extrathermal support provided by rotation, magnetic fields, or turbulence. In addition, the hypothesis that the collapse from thermally supported clouds to low-mass stars proceeds through protostellar disks appears untenable, since the disk accretion process almost certainly produces pre-main-sequence stars with radii well below the observed birthline.

Stahler, S. W.↗

Differences in the temporal variations of solar UV flux, 10.7-cm solar radio flux, sunspot number, and Ca-K plage data caused by solar rotation and active region evolution

Attention is given to two types of temporal variations in the solar UV spectral irradiance caused by solar rotation and active region evolution. It is noted that the first type of dissimilar temporal behavior occurs when concentrations of solar active regions evolve at solar longitudes nearly 180 deg apart. Both the UV observations and modeled UV fluxes based on Ca-K plage data then exhibit pronounced 13-day periodicity, whereas the 10.7-cm solar radio flux and sunspot number exhibit quite dissimilar temporal variations. This type of dissimilarity is related to the modeled UV flux and has a dependence on the solar central meridian distance that is narrower than that for the 10.7-cm radio flux or for sunspot numbers. A second case of marked dissimilarity is seen when major new solar active regions arise and dominate the full-disk fluxes for several rotations. It is found that the strongest peaks in 10.7 cm and sunspot numbers tend to occur on their first rotation, for example, during major dips in the total solar irradiance, whereas the Ca-K plages and UV enhancements peak on the next rotation and then decay more slowly on subsequent rotations.

Donnelly, R. F.↗