Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Curves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Crack Growth Rate and Fracture Toughness Tests on Irradiated Ex-Plant Materials

The performance of structural materials is critical for the safe and economic operation of light water reactors. Exposed to neutron irradiation during service, the reactor core internal materials can undergo significant microstructural and microchemical changes, leading to irradiation hardening and embrittlement. To ensure the structural integrity and functionality of nuclear reactor components during long-term operation, material degradation and damage mechanisms must be understood and managed adequately. In this work, irradiated materials harvested from the decommissioned Zorita reactor were studied for their cracking susceptibility and fracture resistance as a function of irradiation dose up to 47 displacement per atom (dpa). The material is a Type 304 stainless steel sectioned from the baffle plates of this pressurized water reactor with 38 years of service. Crack growth rate and fracture toughness J-resistance (J-R) curve tests were performed in low-corrosion-potential environments at ~315°C. All samples behaved similarly under cyclic loading, and no deteriorated corrosion-fatigue behavior was observed in the test environments. Under constant stress intensity factors, most samples did not show elevated crack growth rates, suggesting an adequate stress corrosion cracking resistance in the test environments. However, an unstable cracking behavior was observed in a 47-dpa sample, resulting in significantly higher crack growth rates than expected at high stress intensity factors. Crack instability was also observed in a 0.06-dpa sample but did not lead to a sustained high crack growth rate. The impact of neutron irradiation was more evident in the fracture toughness J-R curve tests. As the dose increased, the J-R curve declined considerably and became very shallow at high doses. A fully intergranular fracture morphology was also observed among the high-dose samples ruptured in an air atmosphere at room temperature. This brittle fracture mode in the absence of high temperature water environment confirmed a high degree of embrittlement of this material resulting from its service exposure to neutron irradiation.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Hybrid Quantum-Classical Neural Network for Calculating Ground State Energies of Molecules

We present a hybrid quantum-classical neural network that can be trained to perform electronic structure calculation and generate potential energy curves of simple molecules. The method is based on the combination of parameterized quantum circuits and measurements. With unsupervised training, the neural network can generate electronic potential energy curves based on training at certain bond lengths. To demonstrate the power of the proposed new method, we present the results of using the quantum-classical hybrid neural network to calculate ground state potential energy curves of simple molecules such as H 2 , LiH, and BeH 2 . The results are very accurate and the approach could potentially be used to generate complex molecular potential energy surfaces.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2024

Heat Transport Hysteresis Generated Through Frequency Switching of a Time-Dependent Temperature Gradient

A stochastic energetics framework is applied to examine how periodically shifting the frequency of a time-dependent oscillating temperature gradient affects heat transport in a nanoscale molecular model. We specifically examine the effects that frequency switching, i.e., instantaneously changing the oscillation frequency of the temperature gradient, has on the shape of the heat transport hysteresis curves generated by a particle connected to two thermal baths, each with a temperature that is oscillating in time. Analytical expressions are derived for the energy fluxes in/out of the system and the baths, with excellent agreement observed between the analytical expressions and the results from nonequilibrium molecular dynamics simulations. We find that the shape of the heat transport hysteresis curves can be significantly altered by shifting the frequency between fast and slow oscillation regimes. We also observe the emergence of features in the hysteresis curves such as pinched loops and complex multi-loop patterns due to the frequency shifting. The presented results have implications in the design of thermal neuromorphic devices such as thermal memristors and thermal memcapacitors.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Anomalous Dispersion in Reflection and Emission of Dye Molecules Strongly Coupled to Surface Plasmon Polaritons

We have studied dispersion of surface plasmon polaritons (SPPs) in the Kretschmann geometry (prism/Ag/dye-doped polymer) in weak, intermediate, and ultra-strong exciton–plasmon coupling regimes. The dispersion curves obtained in the reflection experiment were in good agreement with the simple model predictions at small concentrations of dye (Rhodamine 590, Rh590) in the polymer (Poly(methyl methacrylate), PMMA). At the same time, highly unusual multi-segment “staircase-like” dispersion curves were observed at extra-large dye concentrations, also in agreement with the simple theoretical model predicting large, small, and negative group velocities featured by different polariton branches. In a separate experiment, we measured angular dependent emission of Rh590 dye and obtained the dispersion curves consisting of two branches, one nearly resembling the SPP dispersion found in reflection and the second one almost horizontal. The results of our study pave the road to unparalleled fundamental science and future applications of weak and strong light—matter interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Using Vertically Aligned Carbon Nanofiber Arrays on Rigid or Flexible Substrates for Delivery of Biomolecules and Dyes to Plants

The delivery of biomolecules and impermeable dyes to intact plants is a major challenge. Nanomaterials are up-and-coming tools for the delivery of DNA to plants. As exciting as these new tools are, they have yet to be widely applied. Nanomaterials fabricated on rigid substrate (backing) are particularly difficult to successfully apply to curved plant structures. This study describes the process for microfabricating vertically aligned carbon nanofiber arrays and transferring them from a rigid to a flexible substrate. We detail and demonstrate how these fibers (on either rigid or flexible substrates) can be used for transient transformation or dye (e.g., fluorescein) delivery to plants. We show how VACNFs can be transferred from rigid silicon substrate to a flexible SU-8 epoxy substrate to form flexible VACNF arrays. Further, to overcome the hydrophobic nature of SU-8, fibers in the flexible film were coated with a thin silicon oxide layer (2-3 nm). To use these fibers for delivery to curved plant organs, we deposit a 1 µL droplet of dye or DNA solution on the fiber side of VACNF films, wait 10 min, place the films on the plant organ and employ a swab with a rolling motion to drive fibers into plant cells. With this method, we have achieved dye and DNA delivery in plant organs with curved surfaces.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

The TESS–Keck Survey. I. A Warm Sub-Saturn-mass Planet and a Caution about Stray Light in TESS Cameras

We report the detection of a Saturn-size exoplanet orbiting HD 332231 (TOI 1456) in light curves from the Transiting Exoplanet Survey Satellite (TESS). HD 332231—an F8 dwarf star with a V-band magnitude of 8.56—was observed by TESS in Sectors 14 and 15. We detect a single-transit event in the Sector 15 presearch data conditioning (PDC) light curve. We obtain spectroscopic follow-up observations of HD 332231 with the Automated Planet Finder, Keck I, and SONG telescopes. The orbital period we infer from radial velocity (RV) observations leads to the discovery of another transit in Sector 14 that was masked by PDC due to scattered light contamination. A joint analysis of the transit and RV data confirms the planetary nature of HD 332231 b, a Saturn-size (0.867{sub −0.025}{sup +0.027} R{sub J}), sub-Saturn-mass (0.244±0.021 M{sub J}) exoplanet on a 18.71 day circular orbit. The low surface gravity of HD 332231 b and the relatively low stellar flux it receives make it a compelling target for transmission spectroscopy. Also, the stellar obliquity is likely measurable via the Rossiter–McLaughlin effect, an exciting prospect given the 0.14 au orbital separation of HD 332231 b. The spectroscopic observations do not provide substantial evidence for any additional planets in the HD 332231 system, but continued RV monitoring is needed to further characterize this system. We also predict that the frequency and duration of masked data in the PDC light curves for TESS Sectors 14–16 could hide transits of some exoplanets with orbital periods between 10.5 and 17.5 days.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

A Free-floating or Wide-orbit Planet in the Microlensing Event OGLE-2019-BLG-0551

High-cadence observations of the Galactic bulge by the microlensing surveys led to the discovery of a handful of extremely short-timescale microlensing events that can be attributed to free-floating or wide-orbit planets. Here, we report the discovery of another strong free-floating planet candidate, which was found from the analysis of the gravitational microlensing event OGLE-2019-BLG-0551. The light curve of the event is characterized by a very short duration (≲3 days) and a very small amplitude (≲0.1 mag). From modeling of the light curve, we find that the Einstein timescale, t{sub E}=0.381±0.017 day, is much shorter, and the angular Einstein radius, θ{sub E}=4.35±0.34 μas, is much smaller than those of typical lensing events produced by stellar-mass lenses (t{sub E}∼20 days, θ{sub E}∼0.3 mas), indicating that the lens is very likely to be a planetary-mass object. We conduct an extensive search for possible signatures of a companion star in the light curve of the event, finding no significant evidence for the putative host star. For the first time, we also demonstrate that the angular Einstein radius of the lens does not depend on blending in the low-magnification events with strong finite source effects.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

KELT-9 b’s Asymmetric TESS Transit Caused by Rapid Stellar Rotation and Spin–Orbit Misalignment

KELT-9 b is an ultra-hot Jupiter transiting a rapidly rotating, oblate early-A-type star in a polar orbit. We model the effect of rapid stellar rotation on KELT-9 b’s transit light curve using photometry from the Transiting Exoplanet Survey Satellite to constrain the planet’s true spin–orbit angle and to explore how KELT-9 b may be influenced by stellar gravity darkening. We constrain the host star’s equatorial radius to be 1.089 ± 0.017 times as large as its polar radius and its local surface brightness to vary by ∼38% between its hot poles and cooler equator. We model the stellar oblateness and surface brightness gradient and find that it causes the transit light curve to lack the usual symmetry around the time of minimum light. We take advantage of the light-curve asymmetry to constrain KELT-9 b’s true spin–orbit angle (87{sup ∘}{sub −11{sup ∘+10{sup {sup ∘}}}}), agreeing with Gaudi et al. that KELT-9 b is in a nearly polar orbit. We also apply a gravity-darkening correction to the spectral energy distribution model from Gaudi et al. and find that accounting for rapid rotation gives a better fit to available spectroscopy and yields a more reliable estimate for the star’s polar effective temperature.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Exploring the Atmospheric Dynamics of the Extreme Ultrahot Jupiter KELT-9b Using TESS Photometry

We carry out a phase-curve analysis of the KELT-9 system using photometric observations from NASA’s Transiting Exoplanet Survey Satellite (TESS). The measured secondary eclipse depth and peak-to-peak atmospheric brightness modulation are 650{sub −15}{sup +14} and 566 ± 16 ppm, respectively. The planet’s brightness variation reaches maximum 31 ± 5 minutes before the midpoint of the secondary eclipse, indicating a 5.°2 ± 0.°9 eastward shift in the dayside hot spot from the substellar point. We also detect stellar pulsations on KELT-9 with a period of 7.58695 ± 0.00091 hr. The dayside emission of KELT-9b in the TESS bandpass is consistent with a blackbody brightness temperature of 4600 ± 100 K. The corresponding nightside brightness temperature is 3040 ± 100 K, comparable to the dayside temperatures of the hottest known exoplanets. In addition, we detect a significant phase-curve signal at the first harmonic of the orbital frequency and a marginal signal at the second harmonic. While the amplitude of the first harmonic component is consistent with the predicted ellipsoidal distortion modulation assuming equilibrium tides, the phase of this photometric variation is shifted relative to the expectation. Placing KELT-9b in the context of other exoplanets with phase-curve observations, we find that the elevated nightside temperature and relatively low day–night temperature contrast agree with the predictions of atmospheric models that include H{sub 2} dissociation and recombination. The nightside temperature of KELT-9b implies an atmospheric composition containing about 50% molecular and 50% atomic hydrogen at 0.1 bar, a nightside emission spectrum that deviates significantly from a blackbody, and a 0.5–2.0 μm transmission spectrum that is featureless at low resolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Exploring the Mass-loss Histories of the Red Supergiants

We report mid- to far-infrared imaging and photometry from 7 to 37 μm with SOFIA/FORCAST and 2 μm adaptive optics imaging with LBTI/LMIRCam of a large sample of red supergiants (RSGs) in four Galactic clusters: RSGC1, RSGC2 = Stephenson 2, RSGC3, and NGC 7419. The RSGs in these clusters cover their expected range in luminosity and initial mass from ≈9 to more than 25 M {sub ⊙}. The population includes examples of very late-type RSGs such as MY Cep, which may be near the end of the RSG stage, high-mass-losing maser sources, yellow hypergiants, and post-RSG candidates. Many of the stars and almost all of the most luminous have spectral energy distributions (SEDs) with extended infrared excess radiation at the longest wavelengths. To best model their SEDs, we use the DUSTY code with a variable radial density distribution function to estimate their mass-loss rates. Our M-dot –luminosity relation for 42 RSGs basically follows the classical de Jager curve, but at luminosities below 10{sup 5} L{sub ⊙}, we find a significant population of RSGs with M-dot below the de Jager relation. At luminosities above 10{sup 5} L {sub ⊙}, there is a rapid transition to higher mass-loss rates that approximates and overlaps the de Jager curve. We recommend that instead of using a linear relation or single curve, the empirical M-dot –luminosity relation is better represented by a broad band. Interestingly, the transition to much higher M-dot at about 10{sup 5} L {sub ⊙} corresponds approximately to an initial mass of 18–20 M {sub ⊙}, which is close to the upper limit for RSGs becoming Type II supernovae.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

A Fast, Two-dimensional Gaussian Process Method Based on Celerite: Applications to Transiting Exoplanet Discovery and Characterization

Gaussian processes (GPs) are commonly used as a model of stochastic variability in astrophysical time series. In particular, GPs are frequently employed to account for correlated stellar variability in planetary transit light curves. The efficient application of GPs to light curves containing thousands to tens of thousands of data points has been made possible by recent advances in GP methods, including the celerite method. Here we present an extension of the celerite method to two input dimensions where, typically, the second dimension is small. This method scales linearly with the total number of data points when the noise in each large dimension is proportional to the same celerite kernel and only the amplitude of the correlated noise varies in the second dimension. We demonstrate the application of this method to the problem of measuring precise transit parameters from multiwavelength light curves and show that it has the potential to improve transit parameters measurements by orders of magnitude. Applications of this method include transit spectroscopy and exomoon detection, as well a broader set of astronomical problems.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Spin Change of Asteroid 2012 TC4 Probably by Radiation Torques

Asteroid 2012 TC4 is a small (∼10 m) near-Earth object that was observed during its Earth close approaches in 2012 and 2017. Earlier analyses of light curves revealed its excited rotation state. We collected all available photometric data from the two apparitions to reconstruct its rotation state and convex shape model. We show that light curves from 2012 and 2017 cannot be fitted with a single set of model parameters; the rotation and precession periods are significantly different for these two data sets, and they must have changed between or during the two apparitions. Nevertheless, we could fit all light curves with a dynamically self-consistent model assuming that the spin states of 2012 TC4 in 2012 and 2017 were different. To interpret our results, we developed a numerical model of its spin evolution in which we included two potentially relevant perturbations: (i) gravitational torque due to the Sun and Earth and (ii) radiation torque, known as the Yarkovsky–O’Keefe–Radzievskii–Paddack (YORP) effect. Despite our model simplicity, we found that the role of gravitational torques is negligible. Instead, we argue that the observed change of its spin state may be plausibly explained as a result of the YORP torque. To strengthen this interpretation, we verify that (i) the internal energy dissipation due to material inelasticity and (ii) an impact with a sufficiently large interplanetary particle are both highly unlikely causes of its observed spin state change. If true, this is the first case where the YORP effect has been detected for a tumbling body.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

AX UMa, an ab-type RR Lyrae Star with a Rapidly Decreasing Pulsation Period, and Its Binarity

The pulsation periods of RR Lyrae stars usually vary with time, and they are often used as probes to study the mechanism behind the variation. After the early discovery that the pulsation period of the RR Lyrae star AX UMa decreased rapidly, in further research, we made multiband photometric observations of this star using the Sino-Thai 70 cm telescope and the 60 cm telescope at Yunnan Observatories, and collected its light-curve data from several photometry sky surveys. The O–C diagram confirmed that AX UMa has a rapid period decrease with a rate of −7.752 ± 0.005 days Myr{sup −1}, which indicates that it is the fastest-period decreasing ab-type RR Lyrae star in the Galactic field. Moreover, the O – C residuals contain additional periodic variations. We suppose that the variation with a long period is probably caused by the light-travel time effect as the star orbits in a binary system. The calculation shows that the lower mass limit of the companion is about 1 M {sub ⊙}. Combined with the full amplitudes and color indexes, we suggested that the companion is probably a hot subdwarf star. We compared the light curves of AX UMa and those of another binary evolution pulsator, OGLE-BLG-RRLYR-02792, and found that the former shows the characteristics of ab-type RR Lyrae stars, while the latter is more like an extreme long-period c-type RR Lyrae star. However, the absence of a bump in the light curves implies that the mass loss has occurred in the outer atmosphere of AX UMa. The special features of AX UMa make it worth more attention and further observations.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Stellar and Accretion Disk Parameters of the Close Binary HD 50526

We present a photometric and spectroscopic study of HD 50526, an ellipsoidal binary member of the group Double Periodic Variable stars. Performing data mining in photometric surveys and conducting new spectroscopic observations with several spectrographs during 2008–2015, we obtained orbital and stellar parameters of the system. The radial velocities were analyzed with the genetic PIKAIA algorithm, whereas Doppler tomography maps for the Hα and Hβ lines were constructed with the Total Variation Minimization code. An optimized simplex algorithm was used to solve the inverse problem adjusting the light curve with the best stellar parameters for the system. We find an orbital period of 6.ͩ701 ± 0.ͩ001 and a long photometric cycle of 191 ± 2 days. We detected the spectral features of the coldest star and modeled it with a logg=2.79±0.02 dex giant of mass 1.13 ± 0.02 M {sub ⊙} and effective temperature 10500 ± 125 K. In addition, we determine a mass ratio q = 0.206 ± 0.033 and that the hot star is a B-type dwarf of mass 5.48 ± 0.02 M {sub ⊙}. The V-band orbital light curve can be modeled including the presence of an accretion disk around the hotter star. This fills the Roche lobe of the hotter star and has a radius 14.74 ± 0.02 R {sub ⊙} and the temperature at the outer edge is 9400 K. Two bright spots located in the disk account for the global morphology of the light curve. The Doppler tomography maps of Hα and Hβ reveal complex structures of mass fluxes in the system.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Bringing 2D Eclipse Mapping out of the Shadows with Leave-one-out Cross Validation

Abstract Eclipse mapping is a technique for inferring 2D brightness maps of transiting exoplanets from the shape of an eclipse light curve. With JWST’s unmatched precision, eclipse mapping is now possible for a large number of exoplanets. However, eclipse mapping has only been applied to two planets, and the nuances of fitting eclipse maps are not yet fully understood. Here, we use Leave-one-out Cross Validation (LOO-CV) to investigate eclipse mapping, with application to a JWST NIRISS/SOSS observation of the ultrahot Jupiter WASP-18b. LOO-CV is a technique that provides insight into the out-of-sample predictive power of models on a data-point-by-data-point basis. We show that constraints on planetary brightness patterns behave as expected, with large-scale variations driven by the phase-curve variation in the light curve and smaller-scale structures constrained by the eclipse ingress and egress. For WASP-18b we show that the need for higher model complexity (smaller-scale features) is driven exclusively by the shape of the eclipse ingress and egress. We use LOO-CV to investigate the relationship between planetary brightness map components when mapping under a positive-flux constraint to better understand the need for complex models. Finally, we use LOO-CV to understand the degeneracy between the competing “hot spot” and “plateau” brightness map models of WASP-18b, showing that the plateau model is driven by the ingress shape and the hot spot model is driven by the egress shape, but preference for neither model is due to outliers or unmodeled signals. Based on this analysis, we make recommendations for the use of LOO-CV in future eclipse-mapping studies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

X-Ray Afterglows from the Gamma-Ray Burst “Large-angle” Emission

In this work, we derive basic analytical results for the timing and decay of the gamma-ray burst (GRB) counterpart and delayed afterglow light curves for a brief emission episode from a relativistic surface endowed with angular structure, consisting of a uniform core of size ${\theta }_{c}$ (Lorentz factor ${{\rm{\Gamma }}}_{c}$ and surface emissivity ${i}_{\nu ^{\prime} }^{{\prime} }$ are angle independent) and an axially symmetric power-law envelope (${\rm{\Gamma }}\sim {\theta }^{-g}$). In this "large-angle emission" model, radiation produced during the prompt emission phase (GRB) at angles $\theta \gt {\theta }_{c}$ arrives at the observer well after the burst (delayed emission). The dynamical time range of the very fast decaying GRB "tail" and of the flat afterglow "plateau" and the morphology of the GRB counterpart/afterglow are all determined by two parameters: the core's parameter ${{\rm{\Gamma }}}_{c}{\theta }_{c}$ and the envelope's Lorentz factor index g, leading to three types of light curves that display three post-GRB phases (type 1: tail, plateau/slow decay, post-plateau/normal decay), two post-GRB phases (type 2: tail and fast decay), or just one (type 3: normal decay). We show how X-ray light-curve features can be used to determine core and envelope dynamical and spectral parameters. Testing of the large-angle emission model is done using the Swift/XRT X-ray emission of two afterglows of type 1 (GRB 060607A, GRB 061121), one of type 2 (GRB 061110A), and one of type 3 (GRB 061007). We find that the X-ray afterglows with plateaus require an envelope Lorentz factor ${\rm{\Gamma }}\sim {\theta }^{-2}$ and a comoving-frame emissivity ${i}_{\nu ^{\prime} }^{{\prime} }\sim {\theta }^{2}$; thus, for a typical afterglow spectrum ${F}_{\nu }\sim {\nu }^{-1}$, the lab-frame energy release is uniform over the emitting surface.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Further Evidence of Modified Spin-down in Sun-like Stars: Pileups in the Temperature–Period Distribution

We combine stellar surface rotation periods determined from NASA's Kepler mission with spectroscopic temperatures to demonstrate the existence of pileups at the long-period and short-period edges of the temperature–period distribution for main-sequence stars with temperatures exceeding ~5500 K. The long-period pileup is well described by a curve of constant Rossby number, with a critical value of Ro crit ≲ Ro ⊙ . The long-period pileup was predicted by van Saders et al. as a consequence of weakened magnetic braking, in which wind-driven angular momentum losses cease once stars reach a critical Rossby number. Stars in the long-period pileup are found to have a wide range of ages (~2–6 Gyr), meaning that, along the pileup, rotation period is strongly predictive of a star's surface temperature but weakly predictive of its age. The short-period pileup, which is also well described by a curve of constant Rossby number, is not a prediction of the weakened magnetic braking hypothesis but may instead be related to a phase of slowed surface spin-down due to core-envelope coupling. The same mechanism was proposed by Curtis et al. to explain the overlapping rotation sequences of low-mass members of differently aged open clusters. The relative dearth of stars with intermediate rotation periods between the short- and long-period pileups is also well described by a curve of constant Rossby number, which aligns with the period gap initially discovered by McQuillan et al. in M-type stars. These observations provide further support for the hypothesis that the period gap is due to stellar astrophysics, rather than a nonuniform star formation history in the Kepler field.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

SALT3-NIR: Taking the Open-source Type Ia Supernova Model to Longer Wavelengths for Next-generation Cosmological Measurements

Abstract A large fraction of Type Ia supernova (SN Ia) observations over the next decade will be in the near-infrared (NIR), at wavelengths beyond the reach of the current standard light-curve model for SN Ia cosmology, SALT3 (∼2800–8700 Å central filter wavelength). To harness this new SN Ia sample and reduce future light-curve standardization systematic uncertainties, we train SALT3 at NIR wavelengths (SALT3-NIR) up to 2 μ m with the open-source model-training software SALTshaker , which can easily accommodate future observations. Using simulated data, we show that the training process constrains the NIR model to ∼2%–3% across the phase range (−20 to 50 days). We find that Hubble residual (HR) scatter is smaller using the NIR alone or optical+NIR compared to optical alone, by up to ∼30% depending on filter choice (95% confidence). There is significant correlation between NIR light-curve stretch measurements and luminosity, with stretch and color corrections often improving HR scatter by up to ∼20%. For SN Ia observations expected from the Roman Space Telescope, SALT3-NIR increases the amount of usable data in the SALT framework by ∼20% at redshift z ≲ 0.4 and by ∼50% at z ≲ 0.15. The SALT3-NIR model is part of the open-source SNCosmo and SNANA SN Ia cosmology packages.

79 ASTRONOMY AND ASTROPHYSICS↗