Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Containment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Fast Correction of Errors in the DFT‐Calculated Energies of Gaseous Nitrogen‐Containing Species

Abstract Modeling adsorption phenomena on surfaces by DFT calculations often involves substantial errors, resulting in inaccurate predictions of catalytic activities. Such errors partly stem from the inaccurate description of the energetics of free molecules. Herein, we use a semiempirical group‐additivity method to correct the DFT‐calculated heats of formation of 106 carbon‐ and nitrogen‐containing gaseous compounds belonging to 15 different chemical families. PBE, PW91, RPBE and BEEF‐vdW initially yield mean absolute errors (MAEs) with respect to experiments in the range of 0.32–0.75 eV. After correcting the systematic errors, the overall MAEs decrease to ∼0.05 eV. Additionally, upon applying the corrections to three types of reaction enthalpies, the resulting MAEs are below 0.10 eV. These functional‐group corrections can be used in (electro)catalysis to correct the gas‐phase references necessary to evaluate equilibrium potentials and adsorption energies, predict error cancellation, and assess conflicting experimental data.

Urrego‐Ortiz, Ricardo↗
DOE OSTI2020

Effect of Electrochemical Oxidation on Physicochemical Properties of Fe-Containing Single-Walled Carbon Nanotubes

Metal catalysts are necessary for fabricating carbon nanotubes, but are often considered impurities in the end products, and arduous steps are used to remove catalyst residues from the nanotube structure. However, as metals can be electrocatalytic, instead of removing them we can utilize their role in detection of analgesics. Herein, we study the physicochemical properties of Fe-containing single-walled carbon nanotubes (SWCNTs), and the effect of simple oxidative pretreatment on them. We show that a gentle anodic pretreatment i) increased the amount of oxidized Fe nanoparticles, most likely exhibiting phases Fe3O4 and Fe2O3 and ii) effectively removed disordered carbonaceous material from SWCNT bundles surfaces. Pretreatment had only a marginal effect on sensitivity towards analgesics. However, interestingly, selectivity of Fe-SWCNTs towards paracetamol and morphine could be modified with pretreatment. Through this kind of in-depth investigation, we can, to a certain extent, correlate various material properties of SWCNTs with the observed electrochemical performance. We show this approach allows us to evaluate what factors in SWCNTs truly affect the electrochemical detection of biomolecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing Effects of Electron Addition to Polycyclic Conjugated Hydrocarbons Containing Four‐Membered Rings

The rectangular cyclobutadiene (CBD, C 4 H 4 ) is a unique moiety for building nonbenzenoid polycyclic conjugated hydrocarbons with interesting electron‐accepting properties. Herein, the investigation on chemical reduction of several CBD‐containing polycyclic hydrocarbons with increasing conjugation length is reported: biphenylene (C 12 H 8 ), dimethyl[2]naphthalene (C 22 H 16 ), and tetramethyl‐dibenzo‐[3]phenylene (C 30 H 22 ). The two‐step sequential reduction is first demonstrated by in situ spectroscopic investigation and then confirmed by the isolation of single crystals of the reduced products. The X‐ray crystallographic analysis reveals the formation of several mono‐ and doubly reduced products in solvent‐separated and complexed forms. The crystal structures for both neutral parents and corresponding reduced products unravel the changes in bond alternation in each ring of the fused systems. Density functional theory (DFT) and nucleus‐independent chemical shift (NICS) scan calculations reveal that the two‐electron addition reduces the aromatic character in the benzenoid rings but has minor influence on the antiaromatic CBD rings.

Zhu, Yikun [Department of Chemistry University at ↗
DOE OSTI2023

Crystallization of a Neptunyl Oxalate Hydrate from Solutions Containing Np V and the Uranyl Peroxide Nanocluster U 60 Ox 30

Uranyl peroxide nanoclusters are an evolving family of materials with potential applications throughout the nuclear fuel cycle. While several studies have investigated their interactions with alkali and alkaline earth metals, no studies have probed their interactions with the actinide elements. This work describes a system containing U 60 Ox 30 , [((UO 2 )(O 2 )) 60 (C 2 O 4 ) 30 ] 60- , and neptunium(V) as a function of neptunium concentration. Ultra-small and small angle X-ray scattering were used to observe these interactions in the aqueous phase, and X-ray diffraction was used to observe solid products. The results show that neptunium induces aggregation of U 60 Ox 30 when the neptunium concentration is ≤ 10 mM, whereas (NpO 2 ) 2 C 2 O 4 ·6H 2 O(cr) and studtite ultimately form at 15–25 mM neptunium. Finally, the latter result suggests that neptunium coordinates with the bridging oxalate ligands in U 60 Ox 30 , leaving metastable uranyl peroxide species in solution, and is an important finding given the potential application of uranyl peroxide nanoclusters in the recycling of used nuclear fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Behavior of copper‐containing high‐entropy alloys in harsh metal‐dusting environments

Abstract Metal dusting is still an unresolved issue at high temperatures. Currently, two material‐related strategies to mitigate metal dusting are described in the literature. On the one hand, highly alloyed materials are used, which contain large amounts of protective oxide‐forming elements, such as Cr, Al, and Si. The second mitigation strategy is based on inhibiting the catalytic effect of Fe, Ni, and Co. These elements all strongly catalyze the formation of solid carbon from the gas phase. Combining the catalytic protection of Cu alloying for metal dusting with protection by a classical alumina/chromia barrier is a native feature that high‐entropy alloys (HEAs) can offer. In this study, the behavior of different equiatomic HEAs with and without Al and/or Cu are studied when exposed at 620°C in a highly aggressive metal‐dusting environment.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Terephthalic Acid Copolyesters Containing Tetramethylcyclobutanediol for High‐Performance Plastics

Abstract There is a need for high‐performance applications for terephthalic acid (TPA) polyesters with high heat resistance, impact toughness, and optical clarity. Bisphenol A (BPA) based polycarbonates and polyarylates have such properties, but BPA is an endocrine disruptor. Therefore, new TPA polyesters that are less hazardous to health and the environment are becoming popular. Tetramethylcyclobutanediol (TMCD) is a difunctional monomer that can be polymerized with TPA and other diols to yield copolyesters with superior properties to conventional TPA polyesters. It has a cyclobutyl ring that makes it more rigid than cyclohexanedimethanol (CHDM) and EG. Thus, TMCD containing TPA copolyesters can have high heat resistance and impact strength. TPA can be made from abundantly available upcycled polyethylene terephthalate (PET). Therefore, this review discusses the synthesis of monomers and copolyesters, the impact of diol composition on material properties, molecular weight, effects of photodegradation, health safety, and substitution of cyclobutane diols for future polyesters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Ion transport in polymerized lyotropic liquid crystals containing ionic liquid

In this work, we investigate the effect of morphology and segmental dynamics on ion transport in polymerized lyotropic liquid crystals (polyLLCs) containing 1-butyl-3-methylimidazolium tetrafluoroborate as ionic liquid (IL). We demonstrate that two important factors, which affect ion conduction in polyLLCs, are grain size and chain density at the interface. The polyLLC with large grain size (70 nm) shows significant reduction in ion conductivity (one order of magnitude) compared to its homopolymer/IL mixture. However, the polyLLC with small grain size (20 nm) has little difference in ion conductivity compared to its homopolymer/IL mixture. It is observed that decreasing the chain density enhances the interaction of IL with polymer chains and consequently slows the relaxation of polymer chains. Finally, in addition, comparing the dynamics of polymer chains in mixtures of homopolymer/IL and templated LLC mesophases shows that the confinement in LLC structure prolongs the relaxation of polymer chains.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Search for bottom-squark pair production with the ATLAS detector in final states containing Higgs bosons, $b$-jets and missing transverse momentum

The result of a search for the pair production of the lightest supersymmetric partner of the bottom quark ($\tilde{b}_1$) using 139 fb -1 of proton-proton data collected at $\sqrt{s}$ = 13 TeV by the ATLAS detector is reported. In the supersymmetric scenarios considered both of the bottom-squarks decay into a b-quark and the second-lightest neutralino, $\tilde{b}_1→b+\tilde{χ}^0_2$. Each $\tilde{χ}^0_2$ is assumed to subsequently decay with 100% branching ratio into a Higgs boson (h) like the one in the Standard Model and the lightest neutralino: $\tilde{χ}^0_2→h+\tilde{χ}^0_1$. The $\tilde{χ}^0_1$ is assumed to be the lightest supersymmetric particle (LSP) and is stable. Two signal mass configurations are targeted: the first has a constant LSP mass of 60 GeV; and the second has a constant mass difference between the $\tilde{χ}^0_2$ and $\tilde{χ}^0_1$ of 130 GeV. The final states considered contain no charged leptons, three or more b-jets, and large missing transverse momentum. No significant excess of events over the Standard Model background expectation is observed in any of the signal regions considered. Limits at the 95% confidence level are placed in the supersymmetric models considered, and bottom-squarks with mass up to 1.5 TeV are excluded.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Direct determination of cellulosic glucan content in starch-containing samples

A simple and highly selective analytical procedure is presented for the determination of cellulosic glucan content in samples that contain both cellulose and starch. This method eliminates the unacceptably large compounding errors of current two-measurement methods. If both starch and cellulose are present before analytical hydrolysis, both will be hydrolyzed to glucose causing bias and inaccuracy in the method. To prevent this interference, the removal of starch prior to cellulosic quantification is crucial. The method presented here is a concise in-series procedure with minimal measurements, eliminating large compounding errors. Sample preparation consists of a starch extraction employing enzymatic hydrolysis followed by a simple filtration and wash. The samples are then subjected to a two-stage acid hydrolysis. The concentration of glucose is determined by ion exchange high-performance liquid chromatography with a Pb 2+ column and a refractive index detector. The cellulosic glucan content is calculated based on the initial dry weight of the starting material. Data for the native biomass materials studied show excellent reproducibility, with coefficients of variance of 3.0% or less associated with the method. This selectivity for cellulosic glucan by the procedure was validated with several analytical techniques such as liquid chromatography coupled with mass spectrometry (LC–MS), Raman spectroscopy, and nuclear magnetic resonance.

09 BIOMASS FUELS↗
DOE OSTI2025

Characterization of SiO 2 Thermally Grown Oxide Stress Evolution of EBCs with Al-Containing Dopants

SiC/SiC ceramic matrix composites (CMCs) are desired for use in combustion environments to achieve higher turbine operating temperatures. However, CMCs require environmental barrier coatings (EBCs) for protection from the gas environment. EBC systems are known to primarily fail through coating delamination via growth of a thermally grown oxide (TGO) at the EBC—silicon bond coating interface when exposed to steam, which accelerates the TGO growth rate. The TGO undergoes a phase transformation during thermal cycling, which results in stresses that may encourage EBC spallation. Yb-silicate EBCs with mullite and yttrium aluminum garnet (YAG) dopant additions were deposited on SiC substrates with a Si intermediate bond coating and exposed to thermal cycling in steam at 1350 °C. The impact of Al dopant additions on the TGO growth rate and the SiO 2 phase transformation was assessed. Photo-stimulated luminescence spectroscopy (PSLS) was used to characterize the Al-containing phases and to measure stress evolution in the EBC following exposure using the stress-induced peak shift of the R-lines of mullite. Raman microscopy was used to map the stresses in the Si bond coating following exposure. It was found that the TGO phase transformation upon cooling increased compressive stress in the Si bond coating within 15 µm of the TGO.

Building Materials↗
DOE OSTI2020

Temperature-Dependence of Corrosion of Ni-Based Superalloys in Hot CO 2 -Rich Gases Containing SO 2 Impurities

Future power plants will require Ni-based superalloys resistant to high-temperature corrosion in CO 2 -rich environments containing impurities. In this work, several commercially available Ni-based alloys (617, 230, 625, 263, 740H) were exposed at 600°C, 650°C, 750°C and 1 atm to 95% CO 2 , 4% H 2 O, 1% O 2 without/with 0.1% SO 2 to simulate compositions expected in a direct-fired supercritical CO 2 power cycle. The results indicate no effect of SO 2 at 750°C, a small negative effect at 650°C, and a large negative effect at 600°C. Alloys exposed at the higher temperatures (650–750°C) formed thin Cr-rich oxide scales, whereas the lowest temperature (600°C) resulted in thicker scales consisting of non-protective oxides and sulfates. Thermodynamic analysis indicates this increased corrosion is associated with a transition in the stable compounds in contact with the gas. Understanding the factors that affect this transition will aid in the selection or design of alloys for future CO 2 -based power systems.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Film condensation with high heat fluxes and scaled experiments using pure steam for reactor containment cooling

Condensation tests were performed using a newly developed test facility for scaling the passive containment cooling system (PCCS) to a small modular reactor (SMR). The PCCS of the SMR plays a pivotal role in ensuring greater safety, reliability, and compactness than what is afforded by traditional reactors. Therefore, a well-designed PCCS is essential to SMRs. However, previous studies and test data were unsuitable for scaling, due to high variation in the test geometry and operating conditions. This study intends to close this research gap by using a novel designed scaled test facility consisting of vertical condensing test sections featuring 1-, 2-, and 4-inch-diameter condensing tubes with annular water cooling, and by applying superheated and saturated steam with different steam mass flow ranges of 5–25 g/s. Further, the primary test data, including axial temperatures, mass flow rates, and pressures, were used in conjunction with a standard data reduction method to estimate critical parameters such as heat fluxes, heat transfer coefficients, and condensation rates. These scaled test data would support improving empirical correlations and validating condensation models to identify scaling distortion for SMR PCCSs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

How much information on precipitation is contained in satellite infrared imagery?

Satellite infrared (IR) brightness temperature providing information on the characteristics of cloud tops is one of the primary input data used for estimating precipitation from satellites. Thus, the natural questions to ask are: Does IR imagery contain more information about precipitation in some regions more than others? What are the factors that lead to such differences? Should we expect the amount of information provided by IR imagery to change with respect to temporal or spatial aggregation? Comprehensive analysis of the accuracy of satellite-based precipitation estimates obtained from any given algorithm may provide qualitative answers to the above questions. However, such an approach only offers conclusions within the limited context of the algorithm used to obtain precipitation estimates; that is, patterns caused by the inherent information content of IR imagery are inextricable from those induced by assumptions embedded in the precipitation estimation algorithm. Here, we address the abovementioned questions from a different perspective using an information-theoretic measure, free of structural assumptions and general to a wide range of relationships, to characterize the average and seasonal dependence between IR imagery provided by satellite sensors in the spectral range (10.7–11.5 μm) and precipitation rates in the contiguous United States (CONUS) across distinct temporal and spatial scales. We analyze a total of more than 1.3 billion pairs of IR and precipitation observations over CONUS, and we observe interesting patterns. First, we show that there is a strong inverse relationship (ρ = - 0.73) between the information content of IR data and the number of no-rain observations; however, its robustness varies regionally and seasonally with less significant correlation during the warm season. Second, we demonstrate that the intuitive relationship of increasing dependence between IR and precipitation as a result of temporal or spatial aggregation exhibits a diminishing returns behavior. For instance, temporal aggregation from 1 to 3 h increases the dependence approximately 7 times as much as temporal aggregation from 12 to 24 h. Furthermore, we quantitatively examine and re-confirm several statements previously reported in the literature such as the strong association between IR and precipitation in convective storms and the low association in orographic rainfall. Finally, we conclude by illustrating the potential of the analysis in diagnosis of operational algorithms for estimating precipitation from IR brightness temperature. The findings of this study pinpoint spatial domains and time scales at which IR is not an adequate proxy for estimating precipitation. Thus, they can potentially guide the development of operational algorithms that utilize satellite Infrared imagery for estimating, downscaling and data fusion of precipitation. Finally, the analysis presented here opens up the possibility of developing new methodologies for diagnosis of satellite-based precipitation estimation algorithms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Potent HIV‑1 protease inhibitors containing oxabicyclo octanol-derived P2-ligands: Design, synthesis, and X‑ray structural studies of inhibitor-HIV-1 protease complexes

Here, we describe here the design, synthesis, and X-ray structural studies of a new class of HIV-1 protease inhibitors containing 8-oxabicyclo[3.2.1]octanol-derived P2 ligands. We investigated the functional effect of these stereochemically defined fused-poly cyclic ligands on enzyme inhibition and antiviral activity in MT-2 cells. The tricyclic core of 8-oxabicyclo[3.2.1]octan-6-ol is designed to interact with the residues in the S2 subsite of HIV-1 protease. The syntheses of the ligands were carried out using the [5+2]-cycloaddition as the key step. Several inhibitors exhibited potent enzyme inhibitory activity. High resolution room-temperature X-ray structures of inhibitor-bound HIV-1 protease were determined. These structures provided important molecular insights for further design and optimization of inhibitor potency.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Hard, transparent, sp3-containing 2D phase formed from few-layer graphene under compression

Despite several theoretically proposed two-dimensional (2D) diamond structures, experimental efforts to obtain such structures are in initial stage. Recent high-pressure experiments provided significant advancements in the field, however, expected properties of a 2D-like diamond such as sp 3 content, transparency and hardness, have not been observed together in a compressed graphene system. Here, we compress few-layer graphene samples on SiO 2 /Si substrate in water and provide experimental evidence for the formation of a quenchable hard, transparent, sp 3 -containing 2D phase. Our Raman spectroscopy data indicates phase transition and a surprisingly similar critical pressure for two-, five-layer graphene and graphite in the 4e6 GPa range, as evidenced by changes in several Raman features, combined with a lack of evidence of significant pressure gradients or local non-hydrostatic stress components of the pressure medium up to ≈ 8 GPa. The new phase is transparent and hard, as evidenced from indentation marks on the SiO 2 substrate, a material considerably harder than graphene systems. Furthermore, we report the lowest critical pressure (≈ 4 GPa) in graphite, which we attribute to the role of water in facilitating the phase transition. Overall, theoretical calculations and experimental data indicate a novel, surface to- bulk phase transition mechanism that gives hint of diamondene formation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperature

This work studies the evolution of elastic and thermal properties of cementitious composites containing micro-size lightweight fillers after exposure to elevated temperatures (up to 800 °C). A multiscale investigation is carried out to study the thermal degradation of cementitious composite materials at multiple scale levels: at cement past level, the dehydration kinetics of cement hydrates (i.e., C–S–H, CH and aluminate hydrates) and development of microcracks are studied as functions of exposure temperatures. The damage mechanism of the inclusion phases and damages within the interfacial transition zone (ITZ) under elevated temperature are also investigated. In addition, the change of mechanical (i.e., elastic moduli, compressive strengths) and thermal (thermal conductivities) properties are measured as functions of the exposure temperature. Based on the experimental studies, a multiscale thermal degradation model is developed where the thermal degradations of cement paste (including water composition, porosity, and solid phase changes), inclusion phases, and the interfaces are captured through a multiscale sub-stepping homogenization scheme. The thermal degradation model is validated through multiple sets of experimental data. Finally, the influence of key parameters including the particle size distribution of the inclusions, the chemical composition, as well as the effects of ITZ damage are studied.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The crystal structure of a new calcium aluminate phase containing formate

A new calcium aluminate phase containing formate ions was synthesized and its crystal structure determined. This new phase is indicated as M-phase and was firstly observed in Portland cement pastes hydrated in presence of Ca-formate and in excess of water. The crystal structure of the M-phase was successfully solved in the R-3 space group of the trigonal system on the basis of synchrotron X-ray single crystal diffraction data. The structural model was confirmed by Rietveld refinement of the powder diffraction data acquired on the synthesized pure sample. The crystal structure of the M-phase is similar to that of ettringite, being characterized by columns of AlO{sub 6} octahedra alternating with groups of three edge-sharing CaO{sub 7} polyhedra. The formate ions (HCOO){sup −} share two oxygens with Ca polyhedra and are located in the interspace between the columns. The crystal structure of the M-phase testifies the strong interaction occurring between small organic molecules as formate and the calcium aluminate components of Portland cement.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of autogenous shrinkage on microcracking and mass transport properties of concrete containing supplementary cementitious materials

It is well-known that supplementary cementitious materials (SCMs) and low water-to-binder (w/b) ratio increase autogenous shrinkage, but the impact on microcracking and long-term transport properties is less understood. This paper examines the effect of microcracking induced by autogenous shrinkage on transport properties of concretes cured up to ~3.6 years. Variables include SCM type (9% SF, 70% GGBS), w/b ratio (0.20–0.45), maximum-aggregate-size (MSA: 5–20 mm) and shrinkage reducing admixture (SRA). Oxygen diffusivity, permeability and water sorptivity were correlated with microcracks characterised using laser scanning confocal microscopy and 3D X-ray microtomography. Results show greater microcracking in mixes containing SCMs, low w/b ratio and large MSA. At the same w/b ratio and binder type, strong positive correlations are observed between transport and microcracking with increasing MSA, confirming the negative impact of autogenous shrinkage. SRA was effective in reducing these effects. The significance is compared with drying shrinkage and implications for durability are discussed.

36 MATERIALS SCIENCE↗