Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Conductor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Pole-strength of the earth from Magsat and magnetic determination of the core radius

A model based on two days of Magsat data is used to numerically evaluate the unsigned magnetic flux linking the earth's surface, and a comparison of the 16.054 GWb value calculated with values from earlier geomagnetic field models reveals a smooth, monotonic, and recently-accelerating decrease in the earth's pole strength at a 50-year average rate of 8.3 MWb, or 0.052%/year. Hide's (1978) magnetic technique for determining the radius of the earth's electrically-conducting core is tested by (1) extrapolating main field models for 1960 and 1965 downward through the nearly-insulating mantle, and then separately comparing them to equivalent, extrapolated models of Magsat data. The two unsigned fluxes are found to equal the Magsat values at a radius which is within 2% of the core radius; and (2) the 1960 main field and secular variation and acceleration coefficients are used to derive models of 1930, 1940 and 1950. The same core magnetic radius value, within 2% of the seismic value, is obtained. It is concluded that the mantle is a nearly-perfect insulator, while the core is a perfect conductor, on the decade time scale.

Voorhies, G. V.↗

DE-2 photoelectron measurements consistent with a large scale parallel electric field over the polar cap

Winningham and Heikkila (1974) presented observations of various polar cap particle morphologies. They interpreted observations of 'anomalous' photoelectron angular distribution over the polar caps to be indicative of a large scale, outwardly directed, parallel electric field over the polar cap. The parallel field was observed to be spatially and/or temporarily variable. However, results obtained by Winningham and Heikkila have one weakness, which is related to the lack of simultaneous observations at many pitch angles. The present investigation is, therefore, concerned with the presentation of results from Dynamics Explorer 2 (DE-2) which confirm the experimental results of Winningham and Heikkila. It is concluded that the earth's polar caps act much like any conductor immersed in a plasma and illuminated by sunlight. DE-1 and DE-2 would then represent tiny point probes examining the internal details in the sheath region of the polar cap.

Winningham, J. D.↗

Metallization for large-area solar cells

In large area, low cost solar cells of any type, the contact and grid structure metallization is an important factor which has an effect on the efficiency of the solar cell and its reliability. The present investigation is concerned with aspects of solar cell efficiency. An optimized metallization design leads to minimum total power loss, which is related to a simultaneous minimization of ohmic voltage drops and of shading of the front surface of the cell by the overlaid metal. The requirements regarding the design for a low-loss metallization pattern for the front surface of large area solar cells are represented by a set of design rules listed in a table. The total shading and voltage drop on such cells can be held to about 5%. However, not every metallization process is suited for meeting the requirements of the low-cost design. The low losses can be achieved only by use of several bus lines containing a bulk conductor, such as a wire.

Wolf, M.↗

Improved Connector Shell for Cable Shields

Cable connector shell improves electrostatic and electromagnetic shielding by electrically connecting cable braid around entire circumference. Connector cable braid is slipped over ferrule and sleeve is slipped over braid, clamping it tightly to shell. Connector shell completely shields cable conductors.

Prisk, A. L.↗

Dielectric Scanning Locates Voids in Glass Foam

Capacitive probes succeed where X-ray and ultrasonic equipment do not. Crossbar switching of pairs of conductors enables detection of dielectric inhomogeneities in selected small volume elements of slab of material. Large void in sample detected as low capacitance reading for volume element containing void. Applicable in nondestructive testing of other dielectric objects for internal defects that exhibit dielectric inhomogeneities.

Gammell, P. M.↗

Status Panel For Video Cassette Recorders

Central array of light-emitting diodes displays status of 30 video cassette recorders (VCR's) monitoring integrated testing of Space Shuttle. Remote status panel linked to VCR's by one 37-conductor cable. Transistor/ transistor logic chips in interface circuit allow LED array to function without drawing power from VCR control circuits.

Talley, G. L., Jr.↗

Application of the Hughes-LIU algorithm to the 2-dimensional heat equation

An implicit explicit algorithm for the solution of transient problems in structural dynamics is described. The method involved dividing the finite elements into implicit and explicit groups while automatically satisfying the conditions. This algorithm is applied to the solution of the linear, transient, two dimensional heat equation subject to an initial condition derived from the soluton of a steady state problem over an L-shaped region made up of a good conductor and an insulating material. Using the IIT/PRIME computer with virtual memory, a FORTRAN computer program code was developed to make accuracy, stability, and cost comparisons among the fully explicit Euler, the Hughes-Liu, and the fully implicit Crank-Nicholson algorithms. The Hughes-Liu claim that the explicit group governs the stability of the entire region while maintaining the unconditional stability of the implicit group is illustrated.

Malkus, D. S.↗

Electrical rotary joint apparatus for large space structures

A structural array and electrical rotary joint for transmitting an electrical power between large space structures having relative rotational movement is disclosed which includes large support framework structures which rotate relative to one another about a common axis of rotation. A rotary interface joint is defined between the structures. A cylindrical hub member is carried by one structure and a cylindrical hub member is carried by a support structure with a third hub member being concentrically within a fourth hub member for relative rotation. Tension connecting cables connect hub members with their associated outer structures whereby relative rotational movement between the structures is transmitted to the cylindrical hub members for unitary motion therewith. Electrical conductor brush members are carried by one hub and electrical contact rings are carried by another hub member in sliding electrical contact with the brushes for transmission of electrical power during relative rotational movement between the two support structures.

Belew, R. R.↗

Advanced electrical power system technology for the all electric aircraft

The application of advanced electric power system technology to an all electric airplane results in an estimated reduction of the total takeoff gross weight of over 23,000 pounds for a large airplane. This will result in a 5 to 10 percent reduction in direct operating costs (DOC). Critical to this savings is the basic electrical power system component technology. These advanced electrical power components will provide a solid foundation for the materials, devices, circuits, and subsystems needed to satisfy the unique requirements of advanced all electric aircraft power systems. The program for the development of advanced electrical power component technology is described. The program is divided into five generic areas: semiconductor devices (transistors, thyristors, and diodes); conductors (materials and transmission lines); dielectrics; magnetic devices; and load management devices. Examples of progress in each of the five areas are discussed. Bipolar power transistors up to 1000 V at 100 A with a gain of 10 and a 0.5 microsec rise and fall time are presented. A class of semiconductor devices with a possibility of switching up to 100 kV is described. Solid state power controllers for load management at 120 to 1000 V and power levels to 25 kW were developed along with a 25 kW, 20 kHz transformer weighing only 3.2 kg.

Finke, R. C.↗

Aircraft lightning-induced voltage test technique developments

High voltage safety, fuels safety, simulation, and response/measurement techniques are discussed. Travelling wave transit times, return circuit conductor configurations, LC ladder network generators, and repetitive pulse techniques are also discussed. Differential conductive coaxial cable, analog fiber optic link, repetitive pulse sampled data instrumentation system, flash A/D optic link system, and an FM telemetry system are considered.

Crouch, K. E.↗

Electromagnetic deep-probing (100-1000 kms) of the Earth's interior from artificial satellites: Constraints on the regional emplacement of crustal resources

The reconnaissance phase of using satellite observtions to studying electromagnetic induction in the solid earth is summarized. Several points are made: (1) satellite data apparently suffer far less from the effects of near surface lateral heterogeneities in the earth than do ground-based data; (2) zonal ionospheric currents during the recovery phase of major magnetic storms appear to be minimal, at least in the dawn and dusk sectors wher MAGSAT was flown; hence the internal contributions that satellites observe during these times is in fact due primarily to induction in the Earth with little or no contribution from ionospheric currents; and (3) the interpretation of satellite data in terms of primitive electromagnetic response functions, while grossly over-simplified, results in a surprisingly well-resolved radius for an equivalent super-conductor representing the conductivity region of the Earth's interior (5,370 + or - 120 km).

Hermance, J. F.↗

Advanced axial field D.C. motor development for electric passenger vehicle

A wound-field axial-flux dc motor was developed for an electric vehicle drive system. The motor is essentially an axial-flux version of the classical Gramme-ring winding motor, but the active conductors are recessed into slots cut into the two opposite faces of the laminated tape-wound core ring. Three motors were built and tested in the program. The second (functional) model was a six-pole machine which weighed 88.5 kg. It developed 16.9 km (33.0 hp), and a max speed of 4800 rpm. Full load efficiency was 92% and predicted SAE D-cycle efficiency was 88%. The last engineering) model was a 4-pole machine with compoles, allowing a weight reduction to 45 kg (100 lbs.) while addressing some manufacturability problems. The engineering model was rated at 13.2 kw (17.6 hp) at 3000 rpm, with a peak power of 19.8 km (26.4 hp) and a max speed of 7200 rpm. Initial test results on this motor showed poor commutation and efficiency; the program was terminated without resolution of these problems.

Jones, W. J.↗

Structural features of conducting quasi-one-dimensional organic halides and pseudohalides

The physical properties of quasi-one-dimensional conductors are profoundly influenced by slight changes in structure. The unusual structural features of this class of materials include only short range order of the anions and structure modulation. The nature of disorder and structure modulation can affect the character of the metal-to-insulator transition at low temperature, and may allow us to make some predictions of low temperature behavior based on room temperature structural properties.

Williams, R.↗

Potentials on large spacecraft in LEO

A system-oriented computer code is used to predict surface charging due to voltages generated within a satellite operating in the typical dense plasma environment of LEO. The use of this code is demonstrated by predicting the expansion of electric fields onto a kapton surface from a pinhole over a biased conductor in a LEO environment. The results are compared to a more-exact solution and experimental data.

Mandell, M. J.↗

Thermoelectric energy conversion with solid electrolytes

The alkali metal thermoelectric converter (AMTEC) is a device for the direct conversion of heat to electrical energy. The sodium ion conductor beta-double prime-alumina is used to form a high-temperature regenerative concentration cell for elemental sodium. An AMTEC of mature design should have an efficiency of 20 to 40 percent, a power density of 0.5 kilowatt per kilogram or more, no moving parts, low maintenance requirements, high durability, and efficiency independent of size. It should be usable with high-temperature combustion, nuclear, or solar heat sources. Experiments have demonstrated the feasibility of the AMTEC and confirmed the theoretical analysis of the device. A wide range of applications from aerospace power to utility power plants appears possible.

Cole, T.↗

Sferics in the stratosphere

Experimental and theoretical work on describing the propagation of sferics (electromagnetic waves) in the stratosphere is reviewed. Measurements are made with a double Langmuir probe that measures the potential difference between two identical, separated conductors, thereby permitting calculation of the electric field. The probe is usually mounted on a balloon floated up to the stratosphere. Data are presented that were taken over a thunderstorm and a theory of sferic propagation is developed, including defined relationships among the source, the propagation medium, and the detected signal. It is demonstrated that the signals recorded by the balloon instrumentation can be used to define the upper limit of the current density and total current in the stratosphere when a sferic is propagating.

Holzworth, R. H.↗

Thermoelectric Generator

Small modular alkali metal thermoelectric generator with no moving parts directly converts heat to electrical energy with efficiency of 20 to 40 percent. Unit uses closed regenerative electrochemical concentration cell based on sodium-ion conductor beta alumina.

Cole, T.↗

Improved Optical Keyboard

Optical keyboard surfaces used in typewriters, computer terminals, and telephone inexpensively fabricated using stack of printed-circuit cards set in laminate. Internal laminations carry all illuminating and sensing light conductors to keys.

Jamieson, R. S.↗