Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Component amounts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Microbial biomass and productivity in seagrass beds

Different methods for measuring the rates of processes mediated by bacteria in sediments and the rates of bacterial cell production have been compared. In addition, net production of the seagrass Zostera capricorni and bacterial production have been compared and some interrelationships with the nitrogen cycle discussed. Seagrass productivity was estimated by measuring the plastochrone interval using a leaf stapling technique. The average productivity over four seasons was 1.28 +/- 0.28 g C m-2 day-1 (mean +/- standard deviation, n = 4). Bacterial productivity was measured five times throughout a year using the rate of tritiated thymidine incorporated into DNA. Average values were 33 +/- 12 mg C m-2 day-1 for sediment and 23 +/- 4 for water column (n = 5). Spatial variability between samples was greater than seasonal variation for both seagrass productivity and bacterial productivity. On one occasion, bacterial productivity was measured using the rate of 32P incorporated into phospholipid. The values were comparable to those obtained with tritiated thymidine. The rate of sulfate reduction was 10 mmol SO4(-2) m-2 day-1. The rate of methanogenesis was low, being 5.6 mg CH4 produced m-2 day-1. A comparison of C flux measured using rates of sulfate reduction and DNA synthesis indicated that anaerobic processes were predominant in these sediments. An analysis of microbial biomass and community structure, using techniques of phospholipid analysis, showed that bacteria were predominant members of the microbial biomass and that of these, strictly anaerobic bacteria were the main components. Ammonia concentration in interstitial water varied from 23 to 71 micromoles. Estimates of the amount of ammonia required by seagrass showed that the ammonia would turn over about once per day. Rapid recycling of nitrogen by bacteria and bacterial grazers is probably important.

NASA Program CELSS↗

Brachinite-Like Clast in the Kaidun Meteorite: First Report of Primitive Achondrite Material

Kaidun is a brecciated meteorite containing many different types of meteorites. It is composed of carbonaceous, enstatite, ordinary and R chondrites with smaller amounts of basaltic achondrites, impact melt products and unknown [1, 2]. Because of the multiple components and high abundance of carbonaceous chondrites, the Kaidun parent body was probably a large C-type asteroid in order to have accumulated clasts of many unrelated asteroids, and thus Kaidun contains previously unknown materials[1]. It has been suggested that the Kaidun parent body trawled through different regions of the solar system [3], but the formation of Kaidun meteorite is still uncertain. In this abstract, we report the first discovery of a brachinite-like clast in Kaidun.

Higashi, K.↗

Basalt Weathering in a Cold and Icy Climate: Three Sisters, Oregon as an Analog for Early Mars

There is abundant evidence for liquid water on early Mars, but the debate remains whether early Mars was warm and wet or cold and icy with punctuated periods of melting. To further investigate the hypothesis of a cold and icy early Mars, we collected rocks and sediments from the Collier and Diller glacial valleys in the Three Sisters volcanic complex in Oregon. We analyzed rocks and sediments with X-ray diffraction (XRD), scanning and transmission electron microscopies with energy dispersive spectroscopy (SEM, TEM, EDS), and visible, short-wave infrared (VSWIR) and thermal-IR (TIR) spectroscopies to characterize chemical weathering and sediment transport through the valleys. Here, we focus on the composition and mineralogy of the weathering products and how they compare to those identified on the martian surface. Phyllosilicates (smectite), zeolites, and poorly crystalline phases were discovered in pro- and supra-glacial sediments, whereas Si-rich regelation films were found on hand samples and boulders in the proglacial valleys. Most phyllosilicates and zeolites are likely detrital, originating from hydrothermally altered units on North Sister. TEM-EDS analyses of the <2 um size fraction of glacial flour samples demonstrate a variety of poorly crystalline (i.e., no long-range crystallographic order) phases: iron oxides, devitrified volcanic glass, and Fe-Si-Al phases. The CheMin XRD on the Curiosity rover in Gale crater has identified significant amounts of X-ray amorphous materials in all samples measured to date. The amorphous component is likely a combination of silicates, iron oxides, and sulfates. Although we have not yet observed amorphous sulfate in the samples from Three Sisters, the variety of poorly crystalline weathering products found at this site is consistent with the variable composition of the X-ray amorphous component identified by CheMin. We suggest that these amorphous phases on Mars could have formed in a similarly cold and icy environment.

Rampe, E. B.↗

Geochemistry of Diagenetic Fluids and Sedimentary Protolith of Gale Crater

The geochemical composition of the sediments of Gale crater can be modeled using two component mixing between a weathered basalt and a sulfate rich endmember. This suggests that the amount of in-situ weathering occurring after deposition was minimal, and most of the variation in weathering indi-ces can be explained simply through addition of Ca-sulfate minerals during diagenesis. Evidence for burial of Gale sediments can be explained through the pres-ence of large ice/dust deposits.

Niles, P. B.↗

Decoupling the Effects of Anthropogenic Emission Reductions from the Meteorology and Natural Emissions in TROPOMI NO 2 Retrievals During the 2020 COVID-19 Lockdowns

Satellite measurements during the COVID-19 lockdowns that began in 2020 revealed unprecedented reductions in NO 2 tropospheric vertical column densities (VCD). These reductions have largely been attributed to reduced anthropogenic emissions associated with abrupt decreases in road traffic and other power consuming business activities. Although decreased emissions tended to be the main contributor to the observed NO 2 VCD reduction, meteorological variability also played a role. Whereas the observed VCD changes were predominantly negative in places where public health policies were strictly enforced, meteorology had both positive and negative effects over short time intervals. Here, we present results from a global study of the NO 2 reductions aimed at disentangling the meteorological and natural emission variability from the anthropogenic emissions over the world’s most populated megacities. For this study, NASA’s TROPOMI NO 2 algorithm was used in conjunction with the Global Modeling Initiative (GMI) chemical transport model to separate the contributions due emissions and meteorology. A priori NO 2 profiles were generated from two GMI simulations performed for 2020 at a resolution of 0.25° longitude x 0.25° latitude. The first simulation used updated, COVID-impacted NOX emissions based on Forster et al. (2020), while the second simulation used the 2019 emissions with the 2020 meteorology, referred to here as 2020BAU. The 2020BAU data set allowed for the decoupling of the emission component from the meteorology. When compared to the same period in 2019, NO 2 column amounts during the lockdowns were reduced in 35 out of 36 cities. While reduced emissions contributed most to the observed total change in NO 2 during the lockdowns, the effects of meteorology were significant, ranging between 40% (Chennai) and 15% (Beijing). In China, an increase in NO 2 levels due to meteorology were observed in five out of the seven cities considered in the study. Use of different a-priori NO 2 profiles from the two simulations in our TROPOMI retrievals allowed for a determination of retrieval errors that ranged from -1.7% to -11.0%. We used the quality assurance flag > 0.75 to select the highest quality scenes in the study period. Using the GMI, we estimated the sampling biases to be in the range -11% to 10% of the total change for the cities in our study.

Brad Fisher↗

Nuclear Power Fault Diagnostics and Preventative Maintenance Optimization

The nuclear industry is beginning to see reactors shut down—even after their operating licenses have been extended—because they are not economically competitive with other energy sources. These early closures happen primarily due to economic reasons, despite excellent safety records. Therefore, it is imperative to reduce costs in order to prevent these early closures. One of the contributors to these economic reasons is the large operations and maintenance costs. This paper showcases recent research on advanced fault diagnostics techniques and preventative maintenance optimization (PMO) for reducing NPP maintenance costs. Specifically, it focuses on the feedwater and condensate system (FWCS) for both pressurized- and boiling-water reactor (BWR) systems. The computerized maintenance management system (CMMS), which contains the plant’s digital record of all corrective maintenance (CM) and preventative maintenance (PM) work orders, provided the ground truth for locating potential faults and labeling the process data as either healthy or faulted. Various feature extraction techniques were used to further differentiate the faulted data from the healthy data. Through a cross-validation procedure, support vectors machines were used to label other test sets of process data as either healthy or faulted. With relatively few faults identified in the BWR system, the potential for PMO opens up, since an unnecessary amount of PM leads to inflated maintenance costs. The steps for PMO are summarized, from component health determinations to recommendations for action. An example of PMO assessment is presented for condensate pumps, condensate booster pumps, and the respective motors that drive them.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Nuclear Power Fault Diagnostics and Preventative Maintenance Optimization NPIC presentation

The nuclear industry is beginning to see reactors shut down—even after their operating licenses have been extended—because they are not economically competitive with other energy sources. These early closures happen primarily due to economic reasons, despite excellent safety records. Therefore, it is imperative to reduce costs in order to prevent these early closures. One of the contributors to these economic reasons is the large operations and maintenance costs. This paper showcases recent research on advanced fault diagnostics techniques and preventative maintenance optimization (PMO) for reducing NPP maintenance costs. Specifically, it focuses on the feedwater and condensate system (FWCS) for both pressurized- and boiling-water reactor (BWR) systems. The computerized maintenance management system (CMMS), which contains the plant’s digital record of all corrective maintenance (CM) and preventative maintenance (PM) work orders, provided the ground truth for locating potential faults and labeling the process data as either healthy or faulted. Various feature extraction techniques were used to further differentiate the faulted data from the healthy data. Through a cross-validation procedure, support vectors machines were used to label other test sets of process data as either healthy or faulted. With relatively few faults identified in the BWR system, the potential for PMO opens up, since an unnecessary amount of PM leads to inflated maintenance costs. The steps for PMO are summarized, from component health determinations to recommendations for action. An example of PMO assessment is presented for condensate pumps, condensate booster pumps, and the respective motors that drive them.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Radiation Impact of Very Low Level Radioactive Steel Reused in Building Industry with Emphasis on External Exposure Pathway - 12569

Considerable quantities of various materials are accumulated during the decommissioning process of nuclear installations. Some of arising materials are activated or contaminated. However, many of them continue to have an economic value and exist in a form that can be recycled or reused for special purposes. Furthermore much of the material generated during decommissioning process will contain only small amounts of radionuclides. For these materials there exist environmental and economic incentives to maximize the use of the concept of clearance from further regulatory control. This impact analysis is devoted to mentioned incentives. The aim is to conditionally clear maximum amount of the scrap steel and consequently recycle and reuse it in form of reinforcing components in tunnel and bridge building scenarios. Recent calculations relevant for external exposure pathway indicate that concept of conditional clearance represent a feasible option for the management of radioactive materials. Even in chosen specific industrial applications it is possible to justify new, approximately one order of magnitude higher, clearance levels. However analysis of other possible exposure pathways relevant for particular scenario of reuse of conditionally cleared materials has to be performed in order to confirm indications from partially obtained results. Basically, the concept of conditional clearance can bring two basic benefits. Firstly it is saving of considerable funds, which would be otherwise used for treatment, conditioning and disposal of materials at appropriate radioactive waste repository. Moreover materials with intrinsic value (particularly metals) can be recycled and reused in industrial applications instead of investing resources on mining and production process in order to obtain new, 'fresh' materials. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

A Model Based Approach to Extract Health Information from Textual Data

In current nuclear power plants (NPPs) a large amount of condition-based data is being generated and stored to assess and monitor component health and performance. The format of this data can be either numeric (e.g., pump vibration data) or textual (e.g., condition report which assess component health). While assessing component health from numeric data can be performed with a large variety of methods, the extraction of information from textual data still remains a challenge. Natural language processing (NLP) methods are starting to be deployed in current NPPs mainly to filter out incident reports (IRs) that are not safety related by employing supervised machine learning methods. However, these methods do not really provide the quantitative information that might be contained in IRs. This paper presents an approach to extract information from textual data (e.g., from IRs, maintenance reports) that is based on NLP data analytics methods coupled with model-based system engineer (MBSE) models. NLP methods are employed to perform syntactic and semantic analyses. Syntactic analysis analyzes the grammatical structure of a sentence; such analysis includes: part of speech (POS) tagging (i.e., identification of grammatic elements of each string - e.g., nouns, verbs), named entity recognition (i.e., identification of text entities - e.g., names, dates, events), and relation extraction (e.g., coreference resolution). On the other hand, semantic analysis is designed to analyze the logic structure of a sentence. Through a specific set of rules, our methods can identify whether a sentence contains health information of a component (e.g., degraded performance, anomaly behavior) or the causal relationship between two events (i.e., a cause-effect pair). An innovative element of our approach is that semantic analysis relies on MBSE models to identify links between textual elements. MBSE are diagrams designed to represent system and component dependencies (from both a form and functional point of view). In our approach, MBSE models emulate system engineer knowledge about component/system architecture. This paper presents in detail how the integration of NLP methods and MBSE models is performed. Few analysis examples focusing on centrifugal pumps are presented.

97 - MATHEMATICS AND COMPUTING↗

Design and Information Content of Arrays of Sorption-based Vapor Sensors using Solubility Interactions and Linear Solvation Energy Relationships

The sorption of vapors by the selective polymeric layer on a chemical vapor sensor is described in detail and dissected into fundamental solubility interactions. The sorption process is modeled in terms of solvation parameters for vapor solubility properties and linear solvation energy relationships. The latter relationships model the log of the partition coefficient as the sum of terms related to specific types of interactions. The approaches are particularly applicable to the design and understanding of acoustic wave chemical vapor sensors such as those based on surface acoustic wave devices. It is shown how an understanding of solubility interactions informs the selection of polymers to obtain chemical diversity in sensor arrays and obtain the maximum amount of chemical information. The inherent dimensionality of the array data, as analyzed by principle components analysis, is consistent with this formulation. Furthermore, it is shown how new chemometric methods have been developed to extract the chemical information from array responses in terms of solvation parameters serving as de-scriptors of the detected vapor.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fate of phosphorus in Everglades agricultural soils after fertilizer application

Land use changes, agricultural drainage and conventional cultivation of winter vegetables and sugarcane cropping in the Everglades Agricultural Area (EAA) may alter soil conditions and organic matter decomposition and ultimately influence the fate of phosphorus (P). Theses agricultural practices promote soil subsidence, reduce the soil depth to bedrock limestone and increase the potential for incorporation of limestone into the root zone of crops. The incorporation of limestone into surface soil has significantly increased soil pH which in turns causes greater fixation of P fertilizer into unavailable forms for plant growth. Additional P fertilization is thus required to satisfy crop nutrient requirements in plant-available P form. It is important to determine how the mixing of bedrock limestone into soils influences the behavior of P fertilizers after their application. To accomplish this task, P fertilizers were applied to (1) typical cultivated soils and to (2) soils that have never been fertilized or extensively tilled. The changes in P concentrations over time were then compared between the two land uses, with differences being attributable to the impacts of cultivation practices. The P distribution in soil varied between land uses, with sugarcane having more P in inorganic pools while the uncultivated soil had more in organic pools. Water-soluble P concentrations in soil increased with increasing fertilizer application rates for all sampling times and both land uses. However, concentrations in uncultivated soil increased proportionally to P-fertilized soil due to organic P mineralization. At all sampling times, plant-available P concentrations remained higher for uncultivated than sugarcane soil. Lower P concentrations for sugarcane were related to adsorption by mineral components (e.g. limestone). Cultivated soils have higher calcium concentrations resulting from incorporation of bedrock limestone into soil by tillage, which increased pH and fostered sequestration of plant-available P into stable calcium-bound P pools. This greater P retention for sugarcane was reflected in the greater proportion of P in inorganic pools compared to uncultivated soils. Some lands within the EAA, including wetlands and seasonally-flooded prairies, are being reclaimed for water quality purposes. However, long-term effects of fertilization and cropping practices described in this document indicate that direct conversion from active farming, such as from sugarcane production directly to wetlands, may be problematic due to the changes in nutrient dynamics that may occur. The shift directly to wetlands may, in fact, release considerable amounts of P into the Everglades, thwarting the intent of the land use change. The inorganic P component in sugarcane soils may lead to the regeneration of soluble P in frequently flooded land uses such as wetlands. While most of the inorganic P pools are unavailable to sugarcane, the direct conversion of sugarcane soils to wetlands may facilitate P release. Here, reclamation of sugarcane fields for environment uses would benefit by an intermediate step to allow for a short duration of seasonal flooding allowing for P conversion from inorganic to organic forms. Prolonged flooding of organic soils previously used for intensive agriculture is not recommended.

54 ENVIRONMENTAL SCIENCES↗

How robust are the size measurements of high-redshift compact galaxies?

Massive quiescent galaxies at z ≈ 2 are apparently much more compact than galaxies of comparable mass today. How robust are these size measurements? We perform comprehensive simulations to determine possible biases and uncertainties in fitting single-component light distributions to real galaxies. In particular, we examine the robustness of the measurements of the luminosity, size, and other structural parameters. We devise simulations with increasing realism to systematically disentangle effects due to the technique (specifically using GALFIT) and the intrinsic structures of the galaxies. By accurately capturing the detailed substructures of nearby elliptical galaxies and then rescaling their sizes and signal-to-noise to mimic galaxies at different redshifts, we confirm that the massive quiescent galaxies at z ≈ 2 are significantly more compact intrinsically than their local counterparts. Their observed compactness is not a result of missing faint outer light due to systematic errors in modeling. In fact, we find that fitting multi-component galaxies with a single Sérsic profile, the procedure most commonly adopted in the literature, biases the inferred sizes higher by up to 10%-20%, which accentuates the amount of size evolution required. If the sky estimation has been done robustly and the model for the point-spread function is fairly accurate, GALFIT can retrieve the properties of single-component galaxies over a wide range of signal-to-noise ratios without introducing any systematic errors.

79 ASTRONOMY AND ASTROPHYSICS↗

A BRIGHT, SPATIALLY EXTENDED LENSED GALAXY AT z = 1.7 BEHIND THE CLUSTER RCS2 032727-132623

We present the discovery of an extremely bright and extended lensed source from the second Red Sequence Cluster Survey (RCS2). RCSGA 032727-132609 is spectroscopically confirmed as a giant arc and counterimage of a background galaxy at z = 1.701, strongly lensed by the foreground galaxy cluster RCS2 032727-132623 at z = 0.564. The giant arc extends over {approx}38'' and has an integrated r-band magnitude of 19.1, making it {approx}20 times larger and {approx}3.5 times brighter than the prototypical lensed galaxy MS1512-cB58. This is the brightest distant lensed galaxy in the universe known to date. We have collected photometry in nine bands, ranging from u to K{sub s} , which densely sample the rest-frame UV and optical light, including the age-sensitive 4000 A break. A lens model is constructed for the system and results in a robust total magnification of 2.04 {+-} 0.16 for the counterimage; we estimate an average magnification of 17.2 {+-} 1.4 for the giant arc based on the relative physical scales of the arc and counterimage on the sky. Fits of single-component spectral energy distribution models to the photometry result in a moderately young age, t = 80 {+-} 40 Myr, small amounts of dust, E(B - V) {<=} 0.11, and an exponentially declining star formation history with e-folding time {tau} = 10 - 50 Myr. After correcting for the lensing magnification, we find a stellar mass of M{sub *} {approx} 10{sup 10} M{sub sun} and a current star formation rate (SFR) {<=}77 M{sub sun} yr{sup -1}. Allowing for episodic star formation, an underlying old burst could contain up to twice the mass inferred from single-component modeling. RCSGA 032727-132609 is typical of the known population of star-forming galaxies near this redshift in terms of its age and stellar mass. Its large magnification and spatial extent provide a unique opportunity to study the physical properties of an individual high-redshift star-forming galaxy in great detail, opening up a new window to the process of galaxy evolution between z = 1.7 and our local universe.

79 ASTRONOMY AND ASTROPHYSICS↗

A survey of chemical separation in accreting neutron stars

The heavy element ashes of rp-process hydrogen and helium burning in accreting neutron stars are compressed to high density where they freeze, forming the outer crust of the star. We calculate the chemical separation on freezing for a number of different nuclear mixtures resulting from a range of burning conditions for the rp-process. We confirm the generic result that light nuclei are preferentially retained in the liquid and heavy nuclei in the solid. This is in agreement with the previous study of a 17-component mixture of rp-process ashes by Horowitz et al., but extends that result to a much larger range of compositions. We also find an alternative phase separation regime for the lightest ash mixtures which does not demonstrate this generic behavior. With a few exceptions, we find that chemical separation reduces the expected Q{sub imp} in the outer crust compared to the initial rp-process ash, where Q{sub imp} measures the mean-square dispersion in atomic number Z of the nuclei in the mixture. We find that the fractional spread of Z plays a role in setting the amount of chemical separation and is strongly correlated to the divergence between the two/three-component approximations and the full component model. The contrast in Y {sub e} between the initial rp-process ashes and the equilibrium liquid composition is similar to that assumed in earlier two-component models of compositionally driven convection, except for very light compositions which produce nearly negligible convective driving. We discuss the implications of these results for observations of accreting neutron stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Investigation of ion-beam machining methods for replicated x-ray optics

The final figuring step in the fabrication of an optical component involves imparting a specified contour onto the surface. This can be expensive and time consuming step. The recent development of ion beam figuring provides a method for performing the figuring process with advantages over standard mechanical methods. Ion figuring has proven effective in figuring large optical components. The process of ion beam figuring removes material by transferring kinetic energy from impinging neutral particles. The process utilizes a Kaufman type ion source, where a plasma is generated in a discharge chamber by controlled electric potentials. Charged grids extract and accelerate ions from the chamber. The accelerated ions form a directional beam. A neutralizer outside the accelerator grids supplies electrons to the positive ion beam. It is necessary to neutralize the beam to prevent charging workpieces and to avoid bending the beam with extraneous electro-magnetic fields. When the directed beam strikes the workpiece, material sputters in a predicable manner. The amount and distribution of material sputtered is a function of the energy of the beam, material of the component, distance from the workpiece, and angle of incidence of the beam. The figuring method described here assumes a constant beam removal, so that the process can be represented by a convolution operation. A fixed beam energy maintains a constant sputtering rate. This temporally and spatially stable beam is held perpendicular to the workpiece at a fixed distance. For non-constant removal, corrections would be required to model the process as a convolution operation. Specific figures (contours) are achieved by rastering the beam over the workpiece at varying velocities. A unique deconvolution is performed, using series-derivative solution developed for the system, to determine these velocities.

Drueding, Thomas W.↗

Monitoring Integrity Of Composite Aircraft Components

System developed that monitors integrity of composite-material structural components of aircraft in service. Includes strain gauges and accelerometers installed permanently in components to monitor vibrations, microprocessor-based data-acquisition system to process outputs of these vibration sensors, and desktop computer to analyze acquired data. By automating significant part of inspection process, system reduces amount of time needed for inspection and cost of inspection equipment. Contributes to safety by giving timely warning of hidden flaws that necessitate early, detailed inspection of critical components to determine whether components should be replaced immediately.

Tang, Shu Shing↗

Understanding Trace Iron and Chromium Incorporation During Gibbsite Crystallization and Effects on Mineral Dissolution

Incorporation of pollutants, e.g., heavy metals, or critical elements, e.g., lithium, as impurities in mineral phases can significantly affect their mobility or sequestration in the environment. Even when present at low concentrations, impurities can alter the solubility and reactivity of the host mineral. Here, in this study, we investigate the incorporation of trace amounts of iron (Fe 3+ ) and chromium (Cr 3+ ) during the crystal growth of the aluminum (Al 3+ ) hydroxide, gibbsite, a major component of bauxite ores, an important soil mineral, and a dominant mineral phase in stored radioactive wastes. Using a comprehensive suite of analytical techniques, we show that both Cr 3+ and Fe 3+ can be incorporated into the gibbsite lattice during coprecipitation by replacing Al 3+ in octahedral sites. These small amounts are consistent with limited to no structural isomorphism shared between Al 3+ and Cr 3+ /Fe 3+ hydroxide precipitates, nor room temperature miscibility of their isostructural M 2 O 3 oxide forms, in contrast with oxyhydroxide forms where Al 3+ and Fe 3+ share similar structural topologies. Despite the limited uptake of Cr 3+ /Fe 3+ , we show that these impurities have significant implications for gibbsite dissolution behavior. The limited uptake of Cr 3+ /Fe 3+ (e.g. 0.43% Cr 3+ and 0.4% Fe 3+ ), we show that these impurities have significant implications for gibbsite dissolution behavior and subsequent reactivity in complex environments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ceramic high pressure gas path seal

Stage 1 ceramic shrouds (high pressure turbine gas path seal) were developed for the GE T700 turbine helicopter engine under the Army/NASA Contract NAS3-23174. This contract successfully proved the viability and benefits of a Stage 1 ceramic shroud for production application. Stage 1 ceramic shrouds were proven by extensive component and engine testing. This Stage 1 ceramic shroud, plasma sprayed ceramic (ZrOs-BY2O3) and bond coating (NiCrAlY) onto a cast metal backing, offers significant engine performance improvement. Due to the ceramic coating, the amount of cooling air required is reduced 20% resulting in a 0.5% increase in horsepower and a 0.3% decrease in specific fuel consumption. This is accomplished with a component which is lower in cost than the current production shroud. Stage 1 ceramic shrouds will be introduced into field service in late 1987.

Liotta, G. C.↗