Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Ozone air broadening coefficients in the 9-micron region

Air broadening coefficients and line strengths are reported for selected ozone lines in the 8.8 to 10 micron spectral region. These parameters were obtained from a least squares fit of the Voigt line shape to experimental ozone absorption spectra obtained with a tunable diode laser. Analysis of 11 lines in the nu 1 and 18 lines in the nu 3 band suggest a transition dependent coefficient, although no definitive relationship was identified. The average air broadening coefficient for the nu 1 and nu 3 ozone lines is 0.077 and 0.083 per cm/atm, respectively. The measured line strengths are typically 10% to a factor of 2 larger than those given in the AFGL compilation.

Hoell, J. M.↗

Minority carrier diffusion lengths and absorption coefficients in silicon sheet material

Most of the methods which have been developed for the measurement of the minority carrier diffusion length of silicon wafers require that the material have either a Schottky or an ohmic contact. The surface photovoltage (SPV) technique is an exception. The SPV technique could, therefore, become a valuable diagnostic tool in connection with current efforts to develop low-cost processes for the production of solar cells. The technique depends on a knowledge of the optical absorption coefficient. The considered investigation is concerned with a reevaluation of the absorption coefficient as a function of silicon processing. A comparison of absorption coefficient values showed these values to be relatively consistent from sample to sample, and independent of the sample growth method.

Dumas, K. A.↗

SEL and EPNL noise duration coefficients for the 747 and T-38 aircraft

Duration coefficient were calculated for Boeing 747 and T-38 airplanes for sound exposure level (SEL) and effective perceived noise level (EPNL) scales. The measured SEL suration coefficients were 8.4 for the Boeing 747 and 5.5 for the T-38 result was in good agreement with a previous result for a similar F-5 airplane. In EPNL, the duration coefficients were 7.2 for the Boeing 747 and 5.7 for the T-38. The difference in the results between the two airplanes is believed to be due to their different engine noise source spectra. The difference in the Boeing 747 results in the two different metric was due to the different frequency weighting of A-weighted sound pressure level, used in SEL, and tone-corrected perceived noise level, used in EPNL, when applied to the 747 spectra.

Willshire, W. L., Jr.↗

Review of analysis methods for rotating systems with periodic coefficients

Two of the more common procedures for analyzing the stability and forced response of equations with periodic coefficients are reviewed: the use of Floquet methods, and the use of multiblade coordinate and harmonic balance methods. The analysis procedures of these periodic coefficient systems are compared with those of the more familiar constant coefficient systems.

Dugundji, J.↗

Stratospheric eddy diffusion coefficients from tracer data

Global distributions of nitrous oxide, methane, ozone, and carbon 14 are used to estimate four sets of stratospheric eddy diffusion coefficients. A photochemical equilibrium model calculates O(3P), O(1D), H, HO2, OH, H2O2, NO, and NO2 densities, as a function of altitude, latitude, and time. The calculated O(1D), OH, and observed Cl densities are used to obtain the eddy profiles associated with the methane and nitrous oxide distributions, for altitudes between 10 and 40 km. Application of a constant flux condition to the seasonally averaged ozone data yields eddy values below 20 km. Time-dependent carbon 14 calculations produce eddy coefficients between 13 and 27 km. A composite profile is obtained by comparing the four sets of coefficients. Further, carbon 14 computations are used to test these profiles as well as those recommended in reports issued by the National Academy of Sciences in 1976 and 1979. The composite eddy profile produces the best agreement.

Massie, S. T.↗

Laser measurement of the spectral extinction coefficients of fluorescent, highly absorbing liquids

A conceptual method is developed to deduce rapidly the spectral extinction coefficient of fluorescent, highly absorbing liquids, such as crude or refined petroleum oils. The technique offers the advantage of only requiring one laser wavelength and a single experimental assembly and execution for any specific fluorescent liquid. The liquid is inserted into an extremely thin wedge-shaped cavity for stimulation by a laser from one side and flurescence measurement on the other side by a monochromator system. For each arbitrarily selected extinction wavelength, the wedge is driven slowly to increasing thicknesses until the fluorescence extinguishes. The fluorescence as a function of wedge thickness permits a determination of the extinction coefficient using an included theoretical model. When the monochromator is set to the laser emission wavelength, the extinction coefficient is determined using the usual on-wavelength signal extinction procedure.

Hoge, F. E.↗

On the energy dependence of the radial diffusion coefficient and spectra of inner radiation belt particles - Analytic solutions and comparison with numerical results

A theoretical method by which the energy dependence of the radial diffusion coefficient may be deduced from spectral observations of the particle population at the inner edge of the earth's radiation belts is presented. This region has previously been analyzed with numerical techniques; in this report an analytical treatment that illustrates characteristic limiting cases in the L shell range where the time scale of Coulomb losses is substantially shorter than that of radial diffusion (L approximately 1-2) is given. It is demonstrated both analytically and numerically that the particle spectra there are shaped by the energy dependence of the radial diffusion coefficient regardless of the spectral shapes of the particle populations diffusing inward from the outer radiation zone, so that from observed spectra the energy dependence of the diffusion coefficient can be determined. To insure realistic simulations, inner zone data obtained from experiments on the DIAL, AZUR, and ESRO 2 spacecraft have been used as boundary conditions. Excellent agreement between analytic and numerical results is reported.

Westphalen, H.↗

Estimating regression coefficients from clustered samples: Sampling errors and optimum sample allocation

A number of surveys were conducted to study the relationship between the level of aircraft or traffic noise exposure experienced by people living in a particular area and their annoyance with it. These surveys generally employ a clustered sample design which affects the precision of the survey estimates. Regression analysis of annoyance on noise measures and other variables is often an important component of the survey analysis. Formulae are presented for estimating the standard errors of regression coefficients and ratio of regression coefficients that are applicable with a two- or three-stage clustered sample design. Using a simple cost function, they also determine the optimum allocation of the sample across the stages of the sample design for the estimation of a regression coefficient.

Kalton, G.↗

Piezoelectric and pyroelectric coefficients for ferroelectric crystals with polarizable molecules

Expressions for piezoelectric and pyroelectric coefficients for a crystal of polarizable point dipoles are derived. The effect of crystal structure on the local electric field acting to polarize the molecules is included via the Lorentz-factor formalism. The derived expressions for the piezo- and pyroelectric coefficients are found to contain terms dependent on derivatives of the Lorentz factors. These terms reflect the changing of molecular dipole moments in response to the changing local electric field in the strained crystal. Inclusion of this effect results in predictions of coefficients substantially different from those obtained using the Lorentz field approximation.

Purvis, C. K.↗

Some analysis methods for rotating systems with periodic coefficients

Two of the more common procedures for analyzing the stability and forced response of equations with periodic coefficients are reviewed: the use of Floquet methods, and the use of multiblade coordinate and harmonic balance methods. The analysis procedures of these periodic coefficient systems are compared with those of the more familiar constant coefficient systems. Previously announced in STAR as N82-23702

Dugundji, J.↗

Measurement of the absorption coefficient using the sound-intensity technique

The possibility of using the sound intensity technique to measure the absorption coefficient of a material is investigated. This technique measures the absorption coefficient by measuring the intensity incident on the sample and the net intensity reflected by the sample. Results obtained by this technique are compared with the standard techniques of measuring the change in the reverberation time and the standing wave ratio in a tube, thereby, calculating the random incident and the normal incident adsorption coefficient.

Atwal, M.↗

Coupling coefficient of gain-guided lasers

An analytical model is presented for the coupling coefficient for two gain-guided coupled waveguides, e.g., semiconductor laser arrays. A common parabolic gain distribution is assumed for the lasers, and the effective dielectric constant distribution is approximated in terms of the bulk refraction index, wavelength, power filling factor, and the antiguiding factor. The fundamental mode is then formulated and used in an integral for the coupling coefficient. The dependence of the coefficient of various waveguide parameters is described.

Katz, J.↗

Analysis for leakage and rotordynamic coefficients of surface roughened tapered annular gas seals

In order to soften the effects of rub, the smooth stators of turbine gas seals are sometimes replaced by a honeycomb surface. This deliberately roughened stator and smooth rotor combination retards the seal leakage and may lead to enhanced rotor stability. However, many factors determine the rotordynamic coefficients and little is known as to the effectiveness of these honeycomb seals under various changes in the independent seal parameters. An analytical-computational method to solve for the rotordynamic coefficients of this type of compressible-flow seal is developed. The governing equations for surface roughned tapered annular gas seals are based on a modified Hirs' turbulent bulk flow model. A perturbation analysis is employed to develop zeroth and first-order perturbation equations. These equations are numerically integrated to solve for the leakage, pressure, density, and velocity for small motion of the shaft about the centered position. The resulting pressure distribution is then integrated to find the corresponding rotor-dynamic coefficients.

Nelson, C. C.↗

Low temperature diffusion coefficients in the Fe-Ni and FeNiP systems: Application to meteorite cooling rates

The interdiffusion coefficient of FeNi in fcc taenite (gamma) of Fe-Ni and Fe-Ni-0.2 P alloys was measured as a function of temperature between 600 and 900 C. This temperature range is directly applicable to the nucleation and growth of the Widmanstatten pattern in iron meteorites and metal regions of stony and stony-iron meteorites. Diffusion couples were made from FeNi or FeNiP alloys which ensured that the couples were in the taenite phase at the diffusion temperature. The presence or absence of grain boundary diffusion was determined by measuring the Ni profile normal to the existing grain boundaries with the AEM. Ignoring any variation of interdiffusion coefficient with composition, the measured data was plotted versus the reciprocal of the diffusion temperature. The FeNi data generally follow the extrapolated Goldstein, et al. (1965) data from high temperatures. The FeNiP data indicates that small additions of P (0.2 wt%) cause a 3 to 10 fold increase in the FeNi interdifussion coefficient increasing with decreasing temperature. This increase is about the same as that predicted by Narayan and Goldstein (1983) at the Widmanstatten growth temperature.

Dean, D. C.↗

On the solar cycle variation in the barometer coefficients of high latitude neutron monitors

Evaluation of barometer coefficients of neutron monitors located at high latitudes has been performed by using the results of the spherical harmonic analysis based on the records from around twenty stations for twelve years from January 1966 to December 1977. The average of data at eight stations, where continuous records are available for twelve years, show that the absolute value of barometer coefficient is in positive correlation with the cosmic ray neutron intensity. The variation rate of the barometer coefficient to the cosmic ray neutron intensity is influenced by the changes in the cutoff rigidity and in the primary spectrum.

Kusunose, M.↗

Developing sensitivity coefficients for a state variable model of a flexible spacecraft with modular attitude control

The numerical value for the sensitivity coefficient of each scalar state variable with respect to each parameter of a five body model of the rotational dynamics of a flexible spacecraft with modular attitude control is generated. The maximum magnitudes of these sensitivity coefficients are arranged in descending order in one table while the final time (steady state) values of these sensitivity coefficients are arranged in order of descending magnitude in a second table.

Chichester, F. D.↗

FTIR-spectrometer-determined absorption coefficients of seven hydrazine fuel gases - Implications for laser remote sensing

The absorption spectra of three hydrazines and four of their air-oxidation products were measured in the 9-12-micron spectral region with a Fourier transform infrared (FTIR) spectrometer with a 0.05-kayser resolution to determine absorption coefficients at CO2 and tunable diode laser wavelengths. The measurements agreed well with published CO2 laser determinations for many of the absorption coefficients, except where the published values are thought to be in error. The coefficients were then used to estimate the sensitivity for remote detection of these gases using CO2 and tunable diode lasers in long-path differential absorption measurements.

Molina, L. T.↗

Coefficient of restitution for low velocity transverse impact of thin graphite-epoxy laminates

A simple model is presented for the low velocity impact behavior of thin plates composed of T300/5208 graphite/epoxy. The model, which is constructed on the assumption that the plate is inextensible in the fiber direction and that the material is incompressible in the z direction, is able to predict the energy absorbed by the target during an impact event, or the 'coefficient of restitution'. The plate essentially deforms by shear, allowing the model to neglect bending deformations. The coefficient of restitution is predicted to increase with large interlaminar shear strength and low transverse shear modulus of the laminate. The coefficient's experimentally measured values agree with model-predicted values within a reasonable error.

Lal, K. M.↗