Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CROSS SECTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Correspondence between theoretical models and dual energy x-ray absorptiometry measurements of femoral cross-sectional growth during adolescence

We have developed an analytical model of long bone cross-sectional ontogeny in which appositional growth of the diaphysis is primarily driven by mechanical stimuli associated with increasing body mass during growth and development. In this study, our goal was to compare theoretical predictions of femoral diaphyseal structure from this model with measurements of femoral bone mineral and geometry by dual energy x-ray absorptiometry. Measurements of mid-diaphyseal femoral geometry and structure were made previously in 101 Caucasian adolescents and young adults 9-26 years of age. The data on measured bone mineral content and calculated section modulus were compared with the results of our analytical model of cross-sectional development of the human femur over the same age range. Both bone mineral content and section modulus showed good correspondence with experimental measurements when the relationships with age and body mass were examined. Strong linear relationships were evident for both parameters when examined as a function of body mass.

NASA Discipline Musculoskeletal↗

Divergence of the total cross section for three body rearrangement collisions with coulomb interactions

Three charged particles 1, 2, 3 collide according to the reaction 1+(2+3) yields (1+3)+2, where (2+3) and (1+3) are hydrogenlike bound states. It is shown when (1+3) is in a highly excited state n, due to the repulsive potential, the cross section in the first Born approximation behaves as 1/n which makes the total cross section to diverge like ln n. The total cross sections in the higher orders of the Born approximation are similarly divergent logarithmically.

Omidvar, K.↗

Measurements of inclusive and differential cross sections for top quark production in association with a Z boson in proton-proton collisions at $\sqrt{s} $ = 13 TeV

Measurements are presented of inclusive and differential cross sections for Z boson associated production of top quark pairs ($ \textrm{t}\overline{\textrm{t}}\textrm{Z} $) and single top quarks (tZq or tWZ). The data were recorded in proton-proton collisions at a center-of-mass energy of 13 TeV, corresponding to an integrated luminosity of 138 fb$^{−1}$. Events with three or more leptons, electrons or muons, are selected and a multiclass deep neural network is used to separate three event categories, the $ \textrm{t}\overline{\textrm{t}}\textrm{Z} $ and tWZ processes, the tZq process, and the backgrounds. A profile likelihood approach is used to unfold the differential cross sections, to account for systematic uncertainties, and to determine the correlations between the two signal categories in one global fit. The inclusive cross sections for a dilepton invariant mass between 70 and 110 GeV are measured to be 1.14 ± 0.07 pb for the sum of $ \textrm{t}\overline{\textrm{t}}\textrm{Z} $ and tWZ, and 0.81 ± 0.10 pb for tZq, in good agreement with theoretical predictions.[graphic not available: see fulltext]

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of inclusive and differential cross sections for W + W − production in proton-proton collisions at $\sqrt{s} = 13$ TeV

Measurements at $\sqrt{s} = 13$ TeV of the opposite-sign W boson pair production cross section in proton-proton collisions are presented. The data used in this study were collected with the CMS detector at the CERN LHC in 2022, and correspond to an integrated luminosity of 34.8 fb -1 . Events are selected by requiring one electron and one muon of opposite charge. A maximum likelihood fit is performed on signal- and background-enriched data categories defined by the flavor and charge of the leptons, the number of jets, and number of jets originating from b quarks. The overall sensitivity is significantly better than that of previous results with a similar integrated luminosity. The improvement comes from a more refined control of experimental uncertainties and an improved fit strategy. An inclusive W + W - production cross section of 125.7 ± 5.6 pb is measured, in agreement with standard model predictions. Cross sections are also reported in a fiducial region close to that of the detector acceptance, both inclusively and differentially, as a function of the jet multiplicity in the event. For the first time in proton-proton collisions, WW events with zero, one, and at least two jets are studied simultaneously and compared with recent theoretical predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Cross sections of the 83 Rb⁢(p,γ)⁢ 84 Sr and 84 Kr⁢(p,γ)⁢ 85 Rb reactions at energies characteristic of the astrophysical γ process

We have measured the cross section of the Rb 83 ( p , γ ) Sr 84 radiative capture reaction in inverse kinematics using a radioactive beam of Rb 83 at incident energies of 2.4 and 2.7 A MeV. Prior to the radioactive beam measurement, the Kr 84 ( p , γ ) Rb 85 radiative capture reaction was measured in inverse kinematics using a stable beam of Kr 84 at an incident energy of 2.7 A MeV. The effective relative kinetic energies of these measurements lie within the relevant energy window for the γ process in supernovae. The central values of the measured partial cross sections of both reactions were found to be 0.17 – 0.42 times the predictions of statistical model calculations. Assuming the predicted cross section at other energies is reduced by the same factor leads to a slightly higher calculated abundance of the p nucleus Sr 84 , caused by the reduced rate of the Sr 84 ( γ , p ) Rb 83 reaction derived from the present measurement.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of the 70 Ge( d , n ) 71 As cross section from 2.1 MeV to 10 MeV

This work reports experimental 70 Ge(d,n) 71 As cross sections producing Arsenic-71 (t 1/2 = 65.3 h, 28% β + ), a potentially useful diagnostic radionuclide. Target stacks containing two nat Ge foils, a nat Ni monitor foil, and an Al degrader were irradiated with 5.5–10 MeV deuterons using an FN Tandem Van de Graaff accelerator. 71 As and 61 Cu, 56 Co, and 58 Co (from nat Ni(d,x)) were quantified in the foils by high purity germanium gamma spectrometry. Furthermore, the measured cross sections are larger than previously reported and suitable for producing preclinical quantities of diagnostic radiopharmaceuticals.

07 ISOTOPE AND RADIATION SOURCES↗

DUNE and MINERvA Flux Studies and a Measurement of the Charged-Current Quasielastic Antineutrino Scattering Cross Section with $<E_{\nu}> \sim 6 $ GeV on a CH Target

One of the biggest open questions in physics is the prevalence of matter over anti-matter in the present universe. One of possible answers lies in the violation of charge and parity symmetry in the lepton sector that would favor matter over anti-matter so that the universe becomes dominated by matter over time. Recent results from neutrino experiments like T2K and NOvA have indicated that there is CP violation in the leptonic sector \citep{Abe:2019vii}. However, the precise measurement of CP violation will require an unprecedented level of accuracy in these oscillation experiments. One of the challenges lies with the systematic uncertainties that come with the measurements, which include uncertainties related to the neutrino flux modeling, interaction modeling and detector related systematic uncertainties.\\ The first part of this thesis will go through the challenges related to flux uncertainties. It will discuss the flux uncertainties related to hadron production in the LBN F beamli ne for the DUNE experiment. Hadron production models used in flux simulations vary widely depending on the simulation and choice of physics models used to simulate the hadron production. This thesis will explain the method of using existing hadron production data to constrain these uncertainties, a method which has been used in MINERvA experiment.\\ The second part of the thesis goes through the effect of possible flux mismodeling and MINERvA's approach to address this effect. In doing so, we discovered that the suspected mismodeling could also result from incorrect estimation of the energy scale of the muons. This project not only demonstrated the challenges of flux modeling but also led to a novel approach of using neutrino energy spectra to understand the correlation between detector and neutrino beamline parameters. \\ A high statistics measurement of the anti-neutrino scattering cross section in the charged current quasielastic (CCQE) channel is the final part of the th esis. Th e 2-body interactions in this channel have the advantage of allowing reconstruction of the interaction kinematics from the outgoing muon trajectory which can be measured very well. Double differential cross sections as a function of muon kinematics, one of the deliverables of this analysis, will help future oscillation experiments understand their data. The cross-section as a function of the four-momentum transferred from the leptonic system to the hadronic system ($Q^{2}_{QE}$) can be used to test models used in simulating antineutrino interactions and the nuclear effects that can modify the predicted cross sections. Nuclear effects arise from the complex nuclear environment and both modify the initial scattering and change the fate of the particles produced from in neutrino-nucleus interactions. Study of nuclear effects will help to understand the structure of the atomic nucleus and its impact on neutrino interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of simplified template cross sections of the Higgs boson produced in association with W or Z bosons in the H → b b ¯ decay channel in proton-proton collisions at s = 13 TeV

Differential cross sections are measured for the standard model Higgs boson produced in association with vector bosons (W, Z) and decaying to a pair of b quarks. Measurements are performed within the framework of the simplified template cross sections. The analysis relies on the leptonic decays of the W and Z bosons, resulting in final states with 0, 1, or 2 electrons or muons. The Higgs boson candidates are either reconstructed from pairs of resolved b-tagged jets, or from single large-radius jets containing the particles arising from two b quarks. Proton-proton collision data at $\sqrt{s}$ =13 TeV, collected by the CMS experiment in 2016–2018 and corresponding to a total integrated luminosity of 138 fb -1 , are analyzed. The inclusive signal strength, defined as the product of the observed production cross section and branching fraction relative to the standard model expectation, combining all analysis categories, is found to be μ = $1.15^{+0.22}_{-0.20}$. This corresponds to an observed (expected) significance of 6.3 (5.6) standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the total and differential Higgs boson production cross-sections at $ \sqrt{s} $ = 13 TeV with the ATLAS detector by combining the H → ZZ* → 4ℓ and H → γγ decay channels

The total and differential Higgs boson production cross-sections are measured through a combined statistical analysis of the H → ZZ* → 4ℓ and H → γγ decay channels. The results are based on a dataset of 139 fb –1 of proton–proton collisions at a centre-of-mass energy of 13 TeV, recorded by the ATLAS detector at the Large Hadron Collider. The measured total Higgs boson production cross-section is $55.5$$^{+4.0}_{–3.8}$ pb, consistent with the Standard Model prediction of 55.6 ± 2.5 pb. All results from the two decay channels are compatible with each other, and their combination agrees with the Standard Model predictions. A combined statistical interpretation of the measured fiducial cross-sections as a function of the Higgs boson transverse momentum is performed in order to probe the Yukawa couplings to the bottom and charm quarks. A similar interpretation is performed by including also the constraints from the measurements of Higgs boson production in association with a W or Z boson in the H → bb¯ and cc¯ decay channels.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Absorption cross sections of stratospheric molecules

Two classes of molecular species must be considered in a calculation of photochemical rates in the stratosphere. The first class consists of molecular oxygen and ozone, while the second class contains the remainder of the minor constituents. If accurate values of the transmitted fluxes are required at large optical depths, the cross sections for molecular oxygen and ozone must be known to within a few per cent at least. On the other hand, the photochemical rates for the minor species are given simply by the relevant cross sections. A review of published cross sections is presented, giving attention to molecular oxygen, ozone, nitric oxide, nitrogen dioxide, nitrous oxide, nitric acid, ammonia, water vapor, hydrogen peroxide, carbon monoxide, carbon dioxide, and sulfur dioxide.

Hudson, R. D.↗

Measurement of W±-boson differential cross-sections in proton–proton collisions with low pile-up data at s=5.02 TeV and 13TeV with the ATLAS detector

High precision single-differential W±$$W^\pm $$-boson production cross-sections as a function of electron or muon transverse momentum pT$$p_\textrm{T}$$ or their pseudorapity η$$\eta $$, as well as double-differential cross-sections as functions of these variables, are measured in proton–proton collisions at centre-of-mass energies s=5.02$$\sqrt{s}=5.02$$ TeV and 13 TeV. The W-boson charge asymmetry as a function of lepton η$$\eta $$ is also measured. The data, collected in dedicated runs at reduced instantaneous luminosity with the ATLAS detector at the Large Hadron Collider, correspond to integrated luminosities of 255 pb-1$$^{-1}$$ at 5.02 TeV and 338 pb-1$$^{-1}$$ at 13 TeV. The measurements are in agreement with Standard-Model predictions calculated at next-to-next-to-leading-order in the strong coupling constant αs$$\alpha _s$$ including transverse-momentum resummation at next-to-next-to-leading logarithmic accuracy using several parton distribution functions. The impact of the measured differential cross-sections as a function of lepton η$$\eta $$ on the determination of these functions is studied using a profiling technique.

Aad, G↗

FiXR : a framework to reconstruct fiber cross-sections from X-ray fiber diffraction experiments

Ab initio reconstruction methods have revolutionized the capabilities of small-angle X-ray scattering (SAXS), allowing the data-driven discovery of previously unknown molecular conformations, exploiting optimization heuristics and assumptions behind the composition of globular molecules. While these methods have been successful for the analysis of small particles, their impact on fibrillar assemblies has been more limited. The micrometre-range size of these assemblies and the complex interaction of their periodicities in their scattering profiles indicate that the discovery of fibril structures from SAXS measurements requires novel approaches beyond extending existing tools for molecular discovery. In this work, it is proposed to use SAXS measurements, together with diffraction theory, to infer the electron distribution of the average cross-section of a fiber. This cross-section is modeled as a discrete electron density with continuous support, allowing representations beyond binary distributions. Additional constraints, such as non-negativity or smoothness/connectedness, can also be added to the framework. The proposed approach is tested using simulated SAXS data from amyloid β fibril models and using measured data of Tobacco mosaic virus from SAXS experiments, recovering the geometry and density of the cross-sections in all cases. The approach is further tested by analyzing SAXS data from different amyloid β fibril assemblies, with results that are in agreement with previously proposed models from cryo-EM measurements. The limitations of the proposed method, together with an analysis of the robustness of the method and the combination with different experimental sources, are also discussed.

Biochemistry & Molecular Biology↗

Inclusive production cross sections at N 3 LO

We present for the first time the inclusive cross section for associated Higgs boson production with a massive gauge boson at next-to-next-to-next-to-leading order in QCD. Furthermore, we introduce n3loxs, a public, numerical program for the evaluation of inclusive cross sections at the third order in the strong coupling constant. Our tool allows to derive predictions for charged- and neutral-current Drell-Yan production, gluon- and bottom-quark-fusion Higgs boson production and Higgs boson associated production with a heavy gauge boson. We discuss perturbative and parton distribution function (PDF) uncertainties of the aforementioned processes. We perform a comparison of global PDF sets for a variety of process including associated Higgs boson production and observe 1σ deviations among predictions for several processes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of differential t t ¯ production cross sections using top quarks at large transverse momenta in p p collisions at s = 13 TeV

A measurement is reported of differential top quark pair (${t\bar{t}}$) production cross sections, where top quarks are produced at large transverse momenta. The data collected with the CMS detector at the LHC are from pp collisions at a center-of-mass energy of 13 TeV corresponding to an integrated luminosity of 35.9 fb$^{-1}$. The measurement uses events where at least one top quark decays as t$ \to $Wb $ \to q\bar{q}'b$ and is reconstructed as a large-radius jet with transverse momentum in excess of 400 GeV. The second top quark is required to decay either in a similar way, or leptonically, as inferred from a reconstructed electron or muon, a bottom quark jet, and a missing transverse momentum due to the undetected neutrino. The cross section is extracted as a function of kinematic variables of individual top quarks or of the ${t\bar{t}}$ system. The results are presented at the particle level, within a region of phase space close to that of the experimental acceptance, and at the parton level, and are compared to various theoretical models. In both decay channels the observed absolute cross sections are significantly lower than the predictions from theory, while the normalized differential measurements are well described.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improved calculation of total cross section for pair production by relativistic heavy ions

A calculation of the total cross section for direct electron-positron pair production by heavy ions is described. It combines the use of the Weizsaecker-Williams method for low-energy transfers and existing calculations for high-energy transfers. Higher-order corrections to the total cross section are calculated based on the Weizsaecher-Williams method and existing results for pair production by photons.

Eby, P. B.↗

Triangular cross-section beam splitters in silicon carbide for quantum information processing

Abstract Triangular cross-section color center photonics in silicon carbide is a leading candidate for scalable implementation of quantum hardware. Within this geometry, we model low-loss beam splitters for applications in key quantum optical operations such as entanglement and single-photon interferometry. We consider triangular cross-section single-mode waveguides for the design of a directional coupler. We optimize parameters for a 50:50 beam splitter. Finally, we test the experimental feasibility of the designs by fabricating triangular waveguides in an ion beam etching process and identify suitable designs for short-term implementation.

42 ENGINEERING↗

Erratum: Monoenergetic photon-induced fission cross-section ratio measurements for U 235 , U 238 , and Pu 239 from 9.0 to 17.0 MeV

In this erratum we report a correction to the previously published photofission cross-section ratio data. The actinide fission-chamber foils utilized in this work were extensively characterized during a new campaign using α- and γ-ray spectroscopy, and 2π alpha counting. These three techniques agreed, resulting in an improved accuracy of the fission-chamber foil masses used in the original experiment. The foil masses measured by α spectroscopy are detailed in Table I. All foils were counted on the same α spectrometer, using an identical geometry, which reduces the systematic uncertainty in the calculated mass ratios since the α spectrometer efficiency cancels out in the ratio. This results in a relative uncertainty on the mass ratio of 1.0% for 235 U/ 238 U, 0.62% for 239 Pu/ 235 U, and 1.1% for 239 Pu/ 238 U. The published cross-section ratio data are re-calculated to reflect the updated target masses and uncertainties. The new mass values cause a 2.40% decrease for the σ( 235 U(γ, f)/ 238 U(γ, f)) ratio, a 5.10% decrease for the σ( 235 U(γ, f)/ 239 Pu(γ, f)) ratio, and a 2.77% decrease for the σ( 238 U(γ, f)/ 239 Pu(γ, f)) ratio. The updated cross-section ratios are presented in Tables II, III, and IV, which are corrected versions of Tables III, IV, and V in Ref. [1]

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗