Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Multiwalled carbon nanotubes in titania based nanocomposite as trap for photoexcitons for enhanced photocatalytic hydrogen production under solar light irradiation

Highlights: • Facile synthesis of FCNTs-TiO{sub 2} composite through wet impregnation method. • Parameters were optimized for enhanced photocatalytic hydrogen production under sunlight irradiation. • At optimal conditions nanocomposite showed 8 folds higher hydrogen efficiency than pristine TiO{sub 2}. • Functionalized carbon nanotubes acts as cocatalyst in this study. - Abstract: The impact of functionalized multiwalled carbon nanotubes in titania based nanocomposite for photocatalytic hydrogen production was investigated. Founctionalization experiments were carried out to remove amorphous carbon atttached to carbon nanotubes by strong acid treatment followed by calcination at desired temperature and time intervals. Materials characterization revealed that anatase TiO{sub 2} nanoparticles randomly dispersed onto the walls of one dimensional multiwalled carbon nanotubes with surface hydroxyl and carbonyl groups besides significant change in optical absorption. Photocatalytic activity was performed in aqueous glycerol solution under solar light and volume of hydrogen production was quantified using gas chromatography. Highest hydrogen production rate of 13,107 μmol·h{sup −1}·g{sup −1} of catalyst was recorded under optimized conditions due to cocatalyst role of functionalized carbon nanotubes. Here, photo electrons were trapped by carbon nanotubes for continuous hydrogen production through reduction reaction.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Facile synthesis and remarkable hydrogen sensing performance of Pt-loaded SnO2 hollow microspheres

Highlights: • SnO{sub 2} HMSs were prepared via a facile hydrothermal route without any additive templates. • Pt-SnO{sub 2} sensor exhibits excellent selectivity to hydrogen at room temperature. • Response of Pt-SnO{sub 2} sensor to 200 ppm H{sub 2} is 21 at 50 °C with a response time of 4 s. - Abstract: SnO{sub 2} hollow microspheres (HMSs) have been prepared through a facile hydrothermal route combining with subsequent calcination without any additive templates. The obtained porous SnO{sub 2} HMSs process a large specific surface area of 64.2 m{sup 2}·g{sup –1} and exhibit high gas sensing capabilities. Surface loading Pt nanoparticles on SnO{sub 2} HMSs improves the sensor response and reduces the operating temperature for achieving high sensitivity, fast response and excellent selectivity to hydrogen at room temperature. The sensor response to 200 ppm H{sub 2} is 21 at 50 °C with a response time of 4 s. These remarking sensing properties are attributed to the synergism provided by the unique porous hollow spherical structure of SnO{sub 2} HMSs and the catalytic activity of Pt nanoparticles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Photon upconversion characteristics of intense green emitting BaYF5:Yb3+,Er3+ nanoclusters prepared by reverse microemulsion

Highlights: • First-time synthesis of BaYF{sub 5}:Yb{sup 3+},Er{sup 3+} nanocluster by reverse microemulsion. • Intense Green upconversion emission under 980 nm excitation. • Proposed a mechanism for nanocluster formation based on XRD, FTIR and HRTEM results. • X-ray Rietveld refinement conformation on the formation of cubic BaYF{sub 5}. • BaYF{sub 5}:Yb{sup 3+},Er{sup 3+} nanocluster exhibited significant the cell viability against HT29 cells. - Abstract: This work presents the first time synthesis of photon upconverting cubic BaYF{sub 5}:Yb{sup 3+},Er{sup 3+} nanoclusters by a novel reverse microemulsion method. Rietveld refinement analysis confirmed the cubic BaYF{sub 5} and BaYF{sub 5}:Yb,Er. The spherical nanoclusters (∼35 nm) are formed by an ensemble of ∼10 nm individual nanocrystals. A plausible formation mechanism is explained based on HRSEM and HRTEM investigations. FTIR revealed the effect of CTAB and oleic acid surfactants on amine and carboxyl functionalization. The cubic BaYF{sub 5}:Yb,Er nanoclusters exhibited an intense green upconversion emission under 980 nm excitation. A three-fold upconversion green emission enhancement was achieved by increasing the calcination temperature from 200 °C to 400 °C. The energy transfer mechanism is described based on pump power dependent upconversion luminescence intensity. Furthermore, cytotoxicity effect of the different concentrations (2.5–300 μg/mL) of the BaYF{sub 5}:Yb,Er were investigated against human colon adenocarcinoma cell line (HT29 cells) for 24 h and 48 h treatment.

60 APPLIED LIFE SCIENCES↗

Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation

Highlights: • Fluorescent powder of lamps. • Fluorescent powder of cathode ray rubes. • Recovery of yttrium from fluorescent powders. • Economic simulation for the processes to recover yttrium from WEEE. - Abstract: In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides. Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%. Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Unique Role of Anchoring Penta-coordinated Al3+ Sites in the Sintering of γ Al2O3-supported Pt Catalysts

In this communication, we report on the specific role of the Alp sites in Pt sintering over γ-Al2O3 support. On the basis of HR-STEM and EXAFS results that showed a bimodal distribution of Pt clusters on γ-Al2O3 during Pt sintering under high-temperature calcination conditions, high-level density functional theory (DFT) calculations were performed to investigate the interactions of atomic Pt and PtO on γ-Al2O3 at different coverages. In agreement with experimental observations, DFT calculations indicate that the sintering processes are both thermodynamically and kinetically hindered by strong interactions of atomic Pt and PtO with the Alp sites on the γ-Al2O3 support. Therefore, increasing the quantity of (100) facets of γ-Al2O3, on which the Alp sites reside, may provide a way to control the sintering of γ-Al2O3-supported Pt catalysts. Pacific Northwest National Laboratory is operated by Battelle for the US Department of Energy.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nanosheet-structured LiV3O8 with high capacity and excellent stability for high energy lithium batteries

Highly stable LiV3O8 with a nanosheet-structure was successfully prepared using polyethylene glycol (PEG) polymer in the precursor solution as the structure modifying agent, followed by calcination in air at 400oC, 450oC, 500oC, and 550oC. These materials provide the best electrochemical performance ever reported for LiV3O8 crystalline electrodes, with a specific discharge capacity of 260 mAh g-1 and no capacity fading over 100 cycles at 100 mA g-1. The excellent cyclic stability and high specific discharge capacity of the material are attributed to the novel nanosheets structure formed in LiV3O8. These LiV3O8 nanosheets are good candidates for cathode materials for high-energy lithium battery applications.

25 ENERGY STORAGE↗

The Effect of Time dealumination and Solvent Concentration in Synthesis of Zeolite Catalyst and Catalytic Test for DiEthyl Ether Production Process

Ethanol is an alternative energy, but its has three distinct disadvantages as a transportation fuel. Its availability is currently limited, and it has a lower volumetric heating value and a lower Reid vapour pressure (RVP) than gasoline. This paper focuses for this disadvantages and to solve this problem can do with converts ethanol to DiEthyl Ether product. This research produced DiEthyl Ether by ethanol dehydration process with zeolite as catalyst. The catalyst synthesis from natural material from District Gunung Kidul, Indonesia. The catalyst produced with dealumination, neutralization, drying and calcination processes. The zeolite catalyst was analysed of Si/Al, X-ray Diffraction and specific surface area. The catalyst product then used for ethanol dehydration to produce DiEthyl Ether. The results shown the biggest surface area is 184,52 m{sup 2}/gram at catalyst production at 10 hours for time dealumination. The crystallite of catalyst product is similar like shown at diffractogram of XRD analysis. The ratio Si/Al biggest is 313.7 that obtaining at catalyst production with 7 hours for time dealumination. The catalytic test use fixed bed reactor with 1 inci diameter and ethanol fermentation both as feed. The operation condition is 150 deg. C at temperature and atmosphere pressure. The compounds product in liquid phase are diethyl ether, methanol and water.

36 MATERIALS SCIENCE↗

Al{sub 2}O{sub 3}-SrCo{sub 0.6}Fe{sub 0.4}O{sub 3} Membrane Coated on a Meso-Porous Al{sub 2}O{sub 3} Support

In this work, a membrane for oxygen separation from air was a composite system with a mesoporous alumina support and a thin layer with microporous structures. The support was formed into a disc shape using alumina powder following a press-calcination process and subsequently, a nanoscale pore membrane with narrow pore size distribution was infused following a sol-gel approach. The sol-gel method entailed the use of a stable sol prepared from an organo-metallic oxide precursor, followed by deposition of the sol onto the porous support via dip coating. The sol hardened upon drying, and forms thin Al{sub 2}O{sub 3}-SrCo{sub 0.6}Fe{sub 0.4}O{sub 3} active layer after sintering.

36 MATERIALS SCIENCE↗

Synthesis and Characterization of Lead Calcium Titanate Nanocomposite

Lead calcium titanate nanoparticles (PCT-NPs) were synthesized by the modified sol-gel method. The mixed metal alkoxide precursor was prepared by moderate refluxing using lead acetate, calcium acetate, titanium iso-propoxide and 2-methoxyethanol. The properties of PCT-NPs were studied as a function of calcination temperatures. Results from the powder X-ray diffraction (XRD) and thermal analysis (TGA/DTA), indicated that the single-phase perovskite PCT-NPs were obtained after heat treatment at temperature of 700 deg. C. The average particle size of synthesized PCT-NPs was found to be around 30 nm from transition electron microscopy (TEM).

36 MATERIALS SCIENCE↗

Perovskite phase transformation in 0.65Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-0.35PbTiO{sub 3} nanoparticles derived by sol-gel

Fabrication of 0.65Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-0.35PbTiO{sub 3} (PMN-PT) nanoparticles with an average size of about 40 nm and their phase transformation behavior from pyrochlore to perovskite phase is investigated. A novel sol-gel method was used for the synthesis of air-stable and precipitate-free diol-based sol of PMN-PT which was dried and partially calcined at 450 deg. C for 1 h to decompose organics and bring down the free energy barrier for perovskite crystallization and then finally annealed in the temperature range 600 to 700 deg. C. Annealed at around 700 deg. C for 1 h, PMN-PT gel powder exhibited nanocrystalline morphology with perovskite phase as confirmed by the transmission electron microscopy and X-ray diffraction techniques.

36 MATERIALS SCIENCE↗

Synthesis and characterization of molybdenum catalysts supported on {gamma}-Al{sub 2}O{sub 3}-CeO{sub 2} composite oxides

The physical and chemical properties of a catalyst play a vital role in various industrial applications. Molybdenum catalysts supported on {gamma}-Al{sub 2}O{sub 3} and {gamma}-Al{sub 2}O{sub 3}-CeO{sub 2} mixed oxides with varying loading of CeO{sub 2} (5, 10, 15, 20 wt% with respect to {gamma}-Al{sub 2}O{sub 3}) were prepared by wet impregnation method. The physiochemical properties of these synthesized Mo catalysts were studied with various characterization techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR), field emission scanning electron microscopy-energy dispersive analysis (FESEM-EDX) and X-ray fluorescence spectrometer (XRF). The results showed that the addition of CeO{sub 2} into the support affected the binding energies of the elements and reducibility of the metal oxides formed after calcination of catalyst samples due to the change in metal-support interaction. Further, the characterization techniques showed that the active metal was well dispersed on the surface of support material.

36 MATERIALS SCIENCE↗

Single phase synthesis and room temperature neutron diffraction studies on multiferroic PbFe{sub 0.5}Nb{sub 0.5}O{sub 3}

The lead-iron-niobate, (PbFe{sub 0.5}Nb{sub 0.5}O{sub 3} or PFN) was synthesized by low temperature sintering Single Step / Solid State Reaction Method. The 700 Degree-Sign C/2 hrs. calcined powder was sintered at 1050 Degree-Sign C/1 hr. The sintered pellets were characterized through X-Ray Diffraction and Neutron Diffraction at room temperature. It is found from the XRD pattern that the materials is in single phase with no traces of pyrochlore phase. It was also confirmed from the neutron diffraction pattern, the structure of PFN to be monoclinic, space group Cm. Structural studies has been carried out by refining the obtained neutron diffraction data by Rietveld refinement method using Fullprof program. The neutron diffraction pattern at 300 K (room temperature) was selected to refine the structure. The lattice parameters obtained are; a = 5.6709 A, b = 5.6732 A, c = 4.0136 A, and {alpha}= 90, {beta}= 89.881, {gamma}= 90. The P-E measurements showed hysteretic behavior with high remnant polarization.

36 MATERIALS SCIENCE↗

Study of de-watering from the gelatinous precipitate formed during co-precipitation of Nd-YAG powder

Neodymium doped Yttrium Aluminium Garnet (Nd:YAG) ceramics have been synthesised using coprecipitation technique and high temperature vacuum sintering. Gelatinous like precipitates were obtained when precursors of Nd, Al and Yb-nitrate solutions are co-precipitated using ammonia co-precipitant. De-watering from the gelatinous like precipitates is a big challenge and it possesses difficulty in filtration. Evaporation of water by heating resulted in strong agglomerated powder. Different agents were used to ease the filtration process, which is correlated with the phase in the calcined powder.

36 MATERIALS SCIENCE↗

Cationic (V, Y)-codoped TiO{sub 2} with enhanced visible light induced photocatalytic activity: A combined experimental and theoretical study

To employ TiO{sub 2} as an efficient photocatalyst, high reactivity under visible light and improved separation of photoexcited carriers are required. An effective co-doping approach is applied to modify the photocatalytic properties of TiO{sub 2} by doping vanadium (transition metal) and yttrium (rare earth element). V and/or Y codoped TiO{sub 2} was prepared using hydrothermal method without any post calcination for crystallization. Based on density functional theory, compensated and noncompensated V, Y codoped TiO{sub 2} models were constructed and their structural, electronic, and optical properties were calculated. Through combined experimental characterization and theoretical modeling, V, Y codoped TiO{sub 2} exhibited high absorption coefficient with enhanced visible light absorption. All the prepared samples showed pure anatase phase and spherical morphology with uniform particle distribution. Electronic band structure demonstrates that V, Y codoping drastically reduced the band gap of TiO{sub 2}. It is found that both the doped V and Y exist in the form of substitutional point defects replacing Ti atom in the lattice. The photocatalytic activity, evaluated by the degradation of methyl orange, displays that the codoped TiO{sub 2} sample exhibits enhanced visible light photocatalytic activity. The synergistic effects of V and Y drastically improved the Brunauer-Emmett-Teller specific surface area, visible light absorption, and electron-hole pair's separation leading to the enhanced visible light catalytic activity.

36 MATERIALS SCIENCE↗

Effect of Er doping on the structural and magnetic properties of cobalt-ferrite

Nanocrystalline particulates of Er doped cobalt-ferrites CoFe{sub (2−x)}Er{sub x}O{sub 4} (0 ≤ x ≤ 0.04), were synthesized, using sol-gel assisted autocombustion method. Co-, Fe-, and Er- nitrates were the oxidizers, and malic acid served as a fuel and chelating agent. Calcination (400–600 °C for 4 h) of the precursor powders was followed by sintering (1000 °C for 4 h) and structural and magnetic characterization. X-ray diffraction confirmed the formation of single phase of spinel for the compositions x = 0, 0.01, and 0.02; and for higher compositions an additional orthoferrite phase formed along with the spinel phase. Lattice parameter of the doped cobalt-ferrites was higher than that of pure cobalt-ferrite. The observed red shift in the doped cobalt-ferrites indicates the presence of induced strain in the cobalt-ferrite matrix due to large size of the Er{sup +3} compared to Fe{sup +3}. Greater than two-fold increase in coercivity (∼66 kA/m for x = 0.02) was observed in doped cobalt-ferrites compared to CoFe{sub 2}O{sub 4} (∼29 kA/m)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and catalytic activity of polysaccharide templated nanocrystalline sulfated zirconia

Nanoscaled materials are of great interest due to their unique enhanced optical, electrical and magnetic properties. Sulfate-promoted zirconia has been shown to exhibit super acidic behavior and high activity for acid catalyzed reactions. Nanocrystalline zirconia was prepared in the presence of polysaccharide template by interaction between ZrOCl{sub 2}⋅8H{sub 2}O and chitosan template. The interaction was carried out in aqueous phase, followed by the removal of templates by calcination at optimum temperature and sulfation. The structural and textural features were characterized by powder XRD, TG, SEM and TEM. XRD patterns showed the peaks of the diffractogram were in agreement with the theoretical data of zirconia with the catalytically active tetragonal phase and average crystalline size of the particles was found to be 9 nm, which was confirmed by TEM. TPD using ammonia as probe, FTIR and BET surface area analysis were used for analyzing surface features like acidity and porosity. The BET surface area analysis showed the sample had moderately high surface area. FTIR was used to find the type species attached to the surface of zirconia. UV-DRS found the band gap of the zirconia was found to be 2.8 eV. The benzylation of o-xylene was carried out batchwise in atmospheric pressure and 433K temperature using sulfated zirconia as catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fabrication of p-type ZnO nanofibers by electrospinning for field-effect and rectifying devices

Ce-doped p-type ZnO nanofibers were synthesized by electrospinning and followed calcinations. The surface morphology, elementary composition, and crystal structure of the nanofibers were investigated. The field effect curve confirms that the resultant Ce-doped ZnO nanofibers are p-type semiconductor. A p-n heterojunction device consisting of Ce-doped p-type ZnO nanofibers and n-type indium tin oxide (ITO) thin film was fabricated on a piece of quartz substrate. The current-voltage (I-V) characteristic of the p-n heterojunction device shows typical rectifying diode behavior. The turn-on voltage appears at about 7 V under the forward bias and the reverse current is impassable.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗