Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Buffer Layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Strain-induced topological transitions in epitaxial films of cadmium arsenide

Strain in epitaxial thin films can have a profound influence on their electronic bands. Here, we investigate the influence of epitaxial strains on the electronic states of (001)-oriented cadmium arsenide (Cd 3 As 2 ) thin films, which are two-dimensional topological insulators. Cd 3 As 2 films were grown coherently on Al 1−x In x Sb buffer layers with varying degrees of lattice mismatch to Cd 3 As 2 , producing in-plane stresses that ranged from compressive to tensile. Using magneto-transport measurements of the Landau levels of the lowest subbands, we show that films under compression remain in the two-dimensional topological insulator state, while a sufficiently large tensile stress induces a transition to a topologically trivial phase. These results qualitatively agree with expectations from theoretical models for these films. At the topological transition, the gap avoids completely closing, and we discuss possible origins.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Synthesis and transport properties of epitaxial Bi (111) films on GaAs (111) substrates

In recent decades, the growth of ultrathin epitaxial bismuth (Bi) films on various substrates has garnered interest due to their unique electronic properties. We report upon the growth and electrical transport properties of epitaxial Bi (111) films in the thickness range of 5–32 nm deposited directly on GaAs (111) substrates, without a buffer layer. The quality of Bi films is found to depend on conditions for substrate treatment using Ar + ion-milling and annealing. Substrates milled at low ion beam currents display poor surface reconstruction after annealing, which hinders the growth of high-quality films. In contrast, substrates milled under optimized conditions led to reconstructed surfaces upon annealing, resulting in epitaxial Bi films with predominantly single-domain orientation. Although epitaxial films formed in both cases, transport measurements indicated significantly higher conductivity for films grown on optimally treated substrates. Measurements at low temperatures suggest that the transport properties are dominated by a surface state with high mobility electrons. Magneto-transport measurements suggest that conductivity and mobility improve progressively with increasing film thickness. For the thinnest 5 nm film, a hole-like state emerges, presumably as the electron-like state is gapped out. These results provide a robust methodology for growing high-quality epitaxial Bi films on GaAs (111) and offer insights into their unique transport properties and our ability to tune them.

Atomic force microscopy↗
DOE OSTI2026

Persistent structural distortion for anticipated improper ferroelectricity in ultrathin h-Lu 1− x Ca x MnO 3 films

Improper ferroelectricity in hexagonal rare-earth manganites (h-RMnO 3 , R = Ho–Lu, Y, Sc) arises from a geometric distortion as the primary order parameter, resilient to depolarizing fields and promising for ultrathin ferroelectric devices. However, the substrate-induced interface clamping effect, which suppresses the geometric distortion in the sub-nanometer regime, has thus far hindered the realization of two-dimensional improper ferroelectrics. This study demonstrates that doping with calcium can enhance ferroelectric structural distortion in h-LuMnO 3 thin films. Compressively strained h-Lu 1−x Ca x MnO 3 (x = 0.1, 0.2, 0.3, 0.4, 0.5) epitaxial thin films were stabilized on sapphire substrates using an h-ScFeO 3 buffer layer. We have found that the interface clamping effect is entirely overcome when the doping concentration reaches x ⩾ 0.2, establishing a potential quasi-2D ferroelectric system with a remarkably high estimated structural transition temperature of larger than 1200 K inferred indirectly from temperature-resolved reflection high-energy electron diffraction. This finding suggests a general strain engineering strategy to enhance improper ferroelectricity in hexagonal manganites.

hexagonal manganites↗
DOE OSTI2019

A buffer-free concept bubble chamber for PICO dark matter searches

Here, we report on the successful operation at Drexel University of the PICO collaboration's first C 3 F 8 buffer-free prototype fluorocarbon bubble chamber. Previous PICO bubble chambers have produced world-leading WIMP search results with fluorocarbon target fluids, separated from the steel bellows by a buffer layer of water. Surface tension effects at the jar walls and liquid-liquid interface lead to a class of background events which have nuclear-recoil-like acoustic signatures and thus contaminate the WIMP-like signal region in analysis. Thus new bubble chambers are to be constructed “right-side-up”, meaning that the jar of C 3 F 8 is above the bellows with no water inside the inner vessel. The Drexel Bubble Chamber (DBC), runs successfully at and below the nuclear recoil thresholds used by PICO for WIMP searches, including thresholds as low as 1.19 keV . We have demonstrated sensitivity to 137 Cs gammas and spontaneous fission neutrons from 244 Cm, and acoustic alpha discrimination is demonstrated to be possible although the observed rate of alpha decays is very low. Position reconstruction from stereoscopic imaging allows for basic analysis cuts for calibration data. The successful construction and operation of this prototype confirm the effectiveness of the right-side-up design, which will be used in future dark matter searches such as PICO-40L and PICO-500.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Atomic force microscopy phase imaging of epitaxial graphene films

Abstract Dynamic mode atomic force microscopy phase imaging is known to produce distinct contrast between graphene areas of different atomic thickness. But the intrinsic complexity of the processes controlling the tip motion and the phase angle shift excludes its use as an independent technique for a quantitative type of analysis. By investigating the relationship between the phase shift, the tip-surface interaction, and the thickness of the epitaxial graphene areas grown on silicon carbide, we shed light on the origin of such phase contrast, and on the complex energy dissipation processes underlying phase imaging. In particular, we study the behavior of phase shift and energy dissipation when imaging the interfacial buffer layer, single-layer, and bilayer graphene regions as a function of the tip-surface separation and the interaction forces. Finally, we compare these results with those obtained on differently-grown quasi free standing single- and bilayer graphene samples.

Lavini, Francesco (ORCID:0000000257223040)↗
DOE OSTI2025

Quantitative surface studies of moiré intercalated Pb structures under Gr/SiC

Quantitative growth studies using surface diffraction and scanning tunneling microscopy are carried out to determine the intercalation conditions for Pb under Gr/SiC, with initial phase a mixture of buffer-layer and single-layer graphene. Intercalation is a kinetically complex, multistage process with intercalated Pb moving between different subsurface locations with annealing, eventually to the location of higher stability. The transfer is determined by monitoring the difference of a given spot intensity from its clean value, as a function of growth parameters. In addition, a broad, low-intensity (10×10) gr moiré phase is observed exclusively originating from intercalated Pb. Well-defined growth conditions are identified for the moiré spot to be observed reversibly. The (10×10) gr phase follows changes of the Pb(10) spot during growth and annealing experiments, instead of changes of the other Gr/SiC spots indicating preferred nucleation of Pb islands on the (10×10) gr domains. These structural results are discussed in connection to different models proposed for the (10×10) gr supercell and the subsurface Pb coverage. In conclusion, mass transport of subsurface Pb is unusually high, possibly because of the very high compression of the intercalated Pb, when compared to metallic Pb(111).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Deviation from Debye-Waller behavior in single crystalline freestanding Ni⁢ O membranes studied via ultrafast electron diffraction

Here, we realize single-crystal freestanding Ni⁢O films on Si⁢N membranes, enabling thin-film scattering experiments with little or no substrate background signal. These membrane samples provide a critical platform for performing ultrafast electron diffraction (UED) to probe the response of the lattice to laser excitation. We show that epitaxial Ni⁢O films on a water-soluble Sr 2 ⁢Ca⁢Al 2⁢ O 6 buffer layer on Sr⁢Ti⁢O 3 substrates can be transferred as freestanding films to the Si⁢N membranes while maintaining the epitaxial character of the films. An above-gap photoexcitation (𝜆 =266 nm) incident on the sample stimulates an initial lattice response of the order of 1.1 ps, followed by the persistence of this state for more than 20 ps. We observe typical Debye-Waller behavior in peaks with 𝑞 above the (220) family, but a distinct deviation from this behavior is seen in low-𝑞 peaks. We relate this behavior to a dynamic decrease in sample mosaicity in response to the optical pump of the order of 3% that endures for approximately 4 ps. We suspect that this dynamic mosaicity is due to laser-induced strain propagation. This work demonstrates the viability of the thin-film transfer method for UED and paves the way for the study of the dynamic response of antiferromagnetic thin-film oxides.

Wisser, Jacob J. [Stanford Univ., CA (United State↗
DOE OSTI2024

Manipulating topological properties in Bi 2 Se 3 / BiSe /transition metal dichalcogenide heterostructures with interface charge transfer

Heterostructures of topological insulator Bi 2 Se 3 on transition metal dichalcogenides (TMDCs) offer a new materials platform for studying novel quantum states by exploiting the interplay among topological orders, charge orders and magnetic orders. Here, the diverse interface attributes, such as material combination, charge re-arrangement, defect and strain, can be utilized to manipulate the quantum properties of this class of materials. Recent experiments of Bi 2 Se 3 /NbSe 2 heterostructures show signatures of strong Rashba band splitting due to the presence of a BiSe buffer layer, but the atomic level mechanism is not fully understood. We conduct first-principles studies of the Bi 2 Se3/BiSe/TMDC heterostructures with five different TMDC substrates (1T phase VSe 2 , MoSe 2 , TiSe 2 , and 2H phase NbSe 2 , MoSe 2 ). We find significant charge transfer at both BiSe/TMDC and Bi 2 Se 3 /BiSe interfaces driven by the work function difference, which stabilizes the BiSe layer as an electron donor and creates interface dipole. The electric field of the interface dipole breaks the inversion symmetry in the Bi 2 Se 3 layer, leading to the giant Rashba band splitting in two quintuple layers and the recovery of the Dirac point in three quintuple layers, with the latter otherwise only occurring in thicker samples with at least six Bi 2 Se 3 quintuple layers. Besides, we find that strain can significantly affect the charge transfer at the interfaces. Our study presents a promising avenue for tuning topological properties in heterostructures of two-dimensional materials, with potential applications in quantum devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Surface states of strained thin films of the Dirac semimetal Cd 3 As 2

Herein we report on the growth and transport properties of strained thin films of the three-dimensional Dirac semimetal Cd 3 As 2 . Epitaxial heterostructures, consisting of (112)-oriented Cd 3 As 2 films, are grown on nearly lattice matched ( Ga 1 - x In x ) Sb buffer layers on (111) GaAs substrates by molecular beam epitaxy. The epitaxial coherency strain breaks the fourfold rotational symmetry, which protects the bulk Dirac nodes in Cd 3 As 2 . All strained films exhibit the quantum Hall effect with most carriers residing in the two-dimensional states, irrespective of the sign of the biaxial stress. The Hall mobility monotonically increases as the biaxial stress is changed from compressive towards tensile. Furthermore, pronounced anisotropy is seen in the transport properties. The results show that the quantum Hall effect, which is quite similar to that of unstrained (112)-oriented films, is independent of the presence of bulk Dirac nodes. Its appearance is consistent with the topological surface states that are a characteristic of the topological Z 2 invariant.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Defects in C d 3 A s 2 epilayers via molecular beam epitaxy and strategies for reducing them

Molecular beam epitaxy offers an exciting avenue for investigating the behavior of the topological semimetal Cd 3 As 2 , by providing routes for doping, alloying, strain engineering, and heterostructure formation. To date, however, minimal exploration has been devoted to the impact of defects that are incorporated into epilayers due to constraints imposed by the substrate and narrow growth window. Here, we use a combination of lattice-matched Zn x Cd 1-x Te buffer layers, miscut substrates, and broadband illumination to study how dislocations, twins, and point defects influence the electron mobility of Cd 3 As 2 . In conclusion, a combination of defect suppression approaches produces Cd 3 As 2 epilayers with electron mobilities upwards of 15000 cm 2 /Vs at room temperature.

14 SOLAR ENERGY↗
DOE OSTI2021

Structure-property relationships and mobility optimization in sputtered La-doped BaSn O 3 films: Toward 100cm 2 V -1 s -1

he wide band gap semiconducting perovskite BaSnO 3 is of high current interest due to outstanding room temperature mobility at high electron density, fueled by potential applications in oxide, transparent, and power electronics. Due in part to a lack of lattice-matched substrates, BaSnO 3 thin films suffer from high defect densities, however, limiting electron mobility. Additionally, the vast majority of BaSnO 3 thin film research has focused on pulsed laser deposition or molecular beam epitaxy. In this work, we present an exhaustive optimization of the mobility of Ba 0.98 La 0.02 SnO 3 films grown by a scalable, high-throughput method: high-pressure-oxygen sputter deposition. Considering target synthesis conditions, substrate selection, buffer layer structure, deposition temperature, deposition rate, thickness, and postdeposition annealing conditions, and by combining high-resolution x-ray diffraction, reciprocal space mapping, rocking curve analysis, scanning transmission electron microscopy, atomic force microscopy, and temperature-dependent electronic transport measurements, detailed understanding of synthesis-structure-property relationships is attained. Optimized room temperature mobility of 96 cm 2 V –1 s –1 is achieved in vacuum-annealed GdScO 3 (110)/BaSnO 3 (120 nm)/Ba 0.98 La 0.02 SnO 3 (200 nm) heterostructures, as well as 92 cm 2 V –1 s –1 on unbuffered substrates and 87 2 V –1 s –1 without postdeposition annealing. These results, including important trends in defect densities and a surprising dependence of mobility on lattice mismatch, substantially expand the understanding of the interplay between deposition conditions, microstructure, and transport in doped BaSnO 3 films, establishing competitive mobilities in films fabricated via a scalable, high-throughput, industry-standard technique.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Epitaxial growth, magnetoresistance, and electronic band structure of GdSb magnetic semimetal films

Motivated by observations of extreme magnetoresistance (XMR) in bulk crystals of rare-earth monopnictide (RE-V) compounds and emerging applications in novel spintronic and plasmonic devices based on thin-film semimetals, we have investigated the electronic band structure and transport behavior of epitaxial GdSb thin films grown on III-V semiconductor surfaces. The Gd 3 + ion in GdSb has a high spin S=7/2 and no orbital angular momentum, serving as a model system for studying the effects of antiferromagnetic order and strong exchange coupling on the resulting Fermi surface and magnetotransport properties of RE-Vs. Here, we present a surface and structural characterization study mapping the optimal synthesis window of thin epitaxial GdSb films grown on III-V lattice-matched buffer layers via molecular-beam epitaxy. To determine the factors limiting XMR in RE-V thin films and provide a benchmark for band-structure predictions of topological phases of RE-Vs, the electronic band structure of GdSb thin films is studied, comparing carrier densities extracted from magnetotransport, angle-resolved photoemission spectroscopy (ARPES), and density-functional theory (DFT) calculations. ARPES shows a hole-carrier rich, topologically trivial, semimetallic band structure close to complete electron-hole compensation, with quantum confinement effects in the thin films observed through the presence of quantum-well states. DFT-predicted Fermi wave vectors are in excellent agreement with values obtained from quantum oscillations observed in magnetic field-dependent resistivity measurements. An electron-rich Hall coefficient is measured despite the higher hole-carrier density, attributed to the higher electron Hall mobility. The carrier mobilities are limited by surface and interface scattering, resulting in lower magnetoresistance than that measured for bulk crystals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Role of structural defects in mediating disordering processes at irradiated epitaxial Fe 3 O 4 / Cr 2 O 3 interfaces

Disordering processes in oxide materials are complicated by the presence of interfaces, which can serve as either point defect sinks or accumulation sites; the response depends on factors such as interfacial structure, chemistry, and termination. Here, we have characterized the disordering of epitaxial Fe 3 O 4 (111) / Cr 2 O 3 (0001) thin film heterostructures after 400 keV Ar 2+ radiation at room temperature. The density of misfit dislocations in both the Fe 3 O 4 overlayer and Cr 2 O 3 buffer layer is varied by changing the thickness of Cr 2 O 3 to be pseudomorphically strained to the Al 2 O 3 (0001) substrate (5 nm thick) or partially relaxed (20 nm thick), as confirmed by Bragg filtering analysis of scanning transmission electron microscopy images. In both cases, irradiation leads to damage accumulation on the Fe 3 O 4 side of the heterointerface, as shown by Rutherford backscattering spectrometry measurements in the channeling geometry. However, the interface with more misfit dislocations exhibits disordering at a faster rate than the less-defective interface. Likewise, layer-resolved electron energy loss spectroscopy reveals interfacial reduction of Fe after irradiation at the more defective interface. Intermixing of Cr across the interface is observed by atom probe tomography, which is likely facilitated by the generation of Cr interstitials in Cr 2 O 3 under irradiation.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Electrical and Optical Properties of n-Type Indium-Doped CdTe/Mg 0.46 Cd 0.54 Te Double Heterostructures

CdTe/Mg 0.46 Cd 0.54 Te double heterostructures with n-type In doping concentrations, varied from 1 × 10 16 to 7 × 10 18 cm -3 , have been grown on InSb substrates using molecular beam epitaxy. Secondary ion mass spectroscopy measurements show strong diffusion of In from the InSb substrate to the CdTe buffer layer, while the In concentration is constant in the CdTe layer between the two Mg 0.46 Cd 0.54 Te barrier layers. Capacitance–voltage measurements show that the dopants are 100% ionized for the doping concentration range from 1 × 10 16 to 1 × 10 18 cm -3 . Additionally, the carrier lifetime decreases with increasing doping concentration (from 0.73 μs for an unintentionally doped sample to 0.74 ns for a 1 × 10 18 cm -3 doped sample) due to the decrease of both radiative and nonradiative lifetimes. Decent carrier lifetimes are achieved (~100 ns) between 1 × 10 16 and 1 × 10 17 cm -3 doping levels, which is beneficial for developing n-type monocrystalline CdTe solar cells, photodetectors, and other optoelectronic devices. Lastly, the strongest photoluminescence intensity is observed when the doping concentration is 1 × 10 17 cm -3 , which corresponds to the highest internal quantum efficiency.

14 SOLAR ENERGY↗
DOE OSTI2016

Intermixing and Formation of Cu-Rich Secondary Phases at Sputtered CdS/CuInGaSe 2 Heterojunctions

In this work, the Cu migration behavior in PVD-CdS/PVD-Cu(In,Ga)Se 2 (CIGS) heterojunctions is investigated by high-resolution electron microscopy (HREM) and energy dispersive X-ray spectroscopy (EDS). Incorporation of Cu into the CdS forms Cu-rich domains but has no effect on epitaxy of the CdS. Epitaxy is commonly observed in the CdS studied. Secondary ion mass spectroscopy depth profiles confirm the presence of Cu in the CdS. In some cases, Cd is completely replaced by Cu, resulting in a Cu-S binary compound epitaxially grown on the CIGS and fully coherent with the surrounding CdS. This is most likely to be cubic Cu 2 S, based on lattice spacing measurements from HREM images and EDS elemental quantification. In addition, we find that the buffer layer crystal structure influences the extent of Ga depletion at the CIGS surface, which is more pronounced adjacent to zinc-blende CdS than wurtzite CdS. Density functional theory calculations reveal that Cu clustering and different Ga depletion widths can be attributed to the inherent anisotropy of wurtzite CdS and differences in CIGS point-defect migration barriers. Understanding the influence of these effects on device properties is a critical step in developing more efficient CdS/CIGS-based photovoltaics.

14 SOLAR ENERGY↗
DOE OSTI2019

Tailoring MgZnO/CdSeTe Interfaces for Photovoltaics

Mg x Zn 1-x O (MZO) shows great promise to replace CdS as a buffer layer in CdTe-based solar cells. It is more transparent, and the MZO bandgap and electron density can be tuned, thus providing flexibility in controlling the conduction band offsets and recombination rates between transparent conductive oxide/MZO and MZO/CdSeTe interfaces. Integrating this material into solar cell devices has been frustrated by the common observation of abnormal current-voltage curves. Simulations indicate that this anomalous behavior can be attributed to front interface barrier effects. Experiments demonstrate that this common MZO interface problem can be resolved experimentally by surface preparation, preheat steps, and removing oxygen during absorber deposition and CdCl 2 treatment. Oxygen during the cell fabrication process is likely to alter MZO properties and MZO/CdSeTe band alignment. After addressing these interface issues and modest optimization, devices with high short-circuit density of 29 mA/cm 2 and efficiency above 16% are demonstrated.

14 SOLAR ENERGY↗
DOE OSTI2016

Device Engineering Towards Improved Tin Sulfide Solar Cell Performance and Performance Reproducibility

As novel absorber materials are developed and screened for their photovoltaic (PV) properties, the challenge remains to rapidly test promising candidates in high-performing PV devices. There is a need to engineer new compatible device architectures, including the development of novel transparent conductive oxides and buffer layers. Here, we consider the two approaches of a substrate-style and a superstrate-style device architecture for novel thin-film solar cells. We use tin sulfide as a test absorber material. Upon device engineering, we demonstrate new approaches to improve device performance and performance reproducibility.

14 SOLAR ENERGY↗
DOE OSTI2020

Optoelectronic Characterization of Emerging Solar Absorber Cu3AsS4

Enargite Cu 3 AsS 4 is a promising absorber for thin-film solar cells but little is known about its optoelectronic properties. Here, we present photoluminescence (PL) spectroscopy, time-resolved terahertz spectroscopy (TRTS), timeresolved photoluminescence (TRPL) spectroscopy, and cyclic voltammetry (CV) measurements of enargite thin films. The results indicate promising defect characteristics with minority carrier lifetimes on the order of ns, and band alignments suggest that buffer layers besides CdS must be developed to achieve high efficiency Cu 3 AsS 4 solar cells.

14 SOLAR ENERGY↗