Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Access”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Human factors in space station architecture 2. EVA access facility: A comparative analysis of 4 concepts for on-orbit space suit servicing

Four concepts for on-orbit spacesuit donning, doffing, servicing, check-out, egress and ingress are presented. These are: the Space Transportation System (STS) Type (shuttle system enlarged), the Transit Airlock (Shuttle Airlock with suit servicing removed from the pump-down chamber), the Suitport (a rear-entry suit mates to a port in the airlock wall), and the Crewlock (a small, individual, conformal airlock). Each of these four concepts is compared through a series of seven steps representing a typical Extra Vehicular Activity (EVA) mission: (1) Predonning suit preparation; (2) Portable Life Support System (PLSS) preparation; (3) Suit Donning and Final Check; (4) Egress/Ingress; (5) Mid-EVA rest period; (6) Post-EVA Securing; (7) Non-Routine Maintenance. The different characteristics of each concept are articulated through this step-by-step approach. Recommendations concerning an approach for further evaluations of airlock geometry, anthropometrics, ergonomics, and functional efficiency are made. The key recommendation is that before any particular airlock can be designed, the full range of spacesuit servicing functions must be considered, including timelines that are most supportive of EVA human productivity.

Cohen, Marc M.↗

A Jupiter Data Analysis Program (JDAP) research grant on wave accessibility and attributes

For more than thirty years the intense decametric radio emissions from Jupiter (DAM) and the corresponding auroral kilometric radiation from the Earth (AKR) have remained major radio science mysteries. Part of the problem, aside from their inherent complexity, has been the difficulty of measuring their source location and emission properties from limited observations. Progress has been made on this problem by locating the source directly, i.e., by analysis of the faraday rotation observed with Voyager as the wave path crossed the Io plasma torus, and indirectly by comparing the peak frequencies of the decametric emission with that at the foot of the Io flux tube. Progress was also made on the general question of how the emissions originate by finding properties of both the AKR and DAM which would imply emission by natural radio lasing.

Calvert, Wynne↗

Four spot laser anemometer and optical access techniques for turbine applications

A time-of-flight anemometer (TOFA) system utilizing a spatial lead-lag filter for bipolar pulse generation has been constructed and tested. This system, called a four-spot laser anemometer, was specifically designed for use in high-speed, turbulent flows in the presence of walls or surfaces. The TOFA system uses elliptical spots to increase the flow acceptance angle to be comparable with that of a fringe-type anemometer. The tightly focused spots used in the four spot yield excellent flare light rejection capabilities. Good results have been obtained to 75 microns normal to a surface, with an f/2.5 collection lens. This system is being evaluated for use in a warm turbine facility. Results from both a particle-lag velocity experiment and boundary layer profiles will be discussed. In addition, an analysis of the use of curved windows in a turbine casing will be presented. Curved windows, matching the inner radius of the turbine casing, preserve the flow conditions, but introduce astigmatic aberrations. A correction optic was designed that virtually eliminates these astigmatic aberrations throughout the intrablade survey region for normal incidence.

Wernet, Mark P.↗

The man/machine interface in information retrieval: Providing access to the casual user

This study is concerned with the difficulties encountered by casual users wishing to employ Information Storage and Retrieval Systems. A casual user is defined as a professional who has neither time nor desire to pursue in depth the study of the numerous and varied retrieval systems. His needs for on-line search are only occasional, and not limited to any particular system. The paper takes a close look at the state of the art of research concerned with aiding casual users of Information Storage and Retrieval Systems. Current experiments such as LEXIS, CONIT, IIDA, CITE, and CCL are presented and discussed. Comments and proposals are offered, specifically in the areas of training, learning and cost as experienced by the casual user. An extensive bibliography of recent works on the subject follows the text.

Dominick, Wayne D.↗

A preliminary investigation of communication techniques for local and remote access to image databases

A software technique which allows users to examine images remotely while minimizing transmission time, is discussed. The technique provides a browsing capability, making it possible to roam over larger images, to zoom to various resolution levels, and to specify subregions of interest in the image to display at full resolution. The software permits analysts to remotely submit images for processing and to review the processing result. The capabilities of the technique under varying conditions and the speed at which imagery can be displayed over direct connect serial lines are discussed and examples of the imagery at various levels of resolution are presented.

Ma, Mathias↗

Access of energetic particles to storm time ring current through enhanced radial 'diffusion'

It is proposed that the transport of particles with energy of at least approximately 40 keV into the geomagnetic storm time ring current can result from enhanced stochastic radial transport driven by fluctuating electric fields during a storm's main phase. The effects of such electric fields are estimated by applying radial diffusion theory, assuming a preexisting trapped-particle population as the initial condition. The feasibility of explaining observed flux increases of particles of at least approximately 40 keV at no more than approximately 4 earth radii by enhanced radial 'diffusion' is then demonstrated. It is estimated that the at least approximately 40-keV portion of the storm time ring current at approximately 3 earth radii consists of about 50 percent preexisting and about 50 percent new particles. The formation of the storm time ring current is found to be perhaps explainable via a combination of direct radial transport at energies no greater than approximately 40 keV and 'diffusive' radial transport at higher energies.

Lyons, L. R.↗

Suitport extra-vehicular access facility

In a system for entering and leaving a space station, a bulkhead divides the module into an antechamber and an airlock. A space suit has a portable life support system (PLSS) interface on its back. The suit is removably attached to the bulkhead by the interface at a hatch in the bulkhead. A PLSS is detachably mounted in the hatch cover, which is pivotally mounted to move away from the hatch to allow an astronaut to enter the suit through the open hatch and the PLSS interface. After entering the suit, the astronaut closes the hatch and attaches the PLSS to the suit by the operating control to which the glove portion of the suit is attached. The astronaut initiates pumpdown of the airlock with the control. When the pumpdown is complete, the astronaut opens the hatch, disconnects the PLSS from the hatch cover, pivots the pressure vessels of the control to one side on their supports, disconnects the glove portions from the pressure vessels and goes EVA.

Cohen, Marc M.↗

Modelling high data rate communication network access protocol

Modeling of high data rate communication systems is different from the low data rate systems. Three simulations were built during the development phase of Carrier Sensed Multiple Access/Ring Network (CSMA/RN) modeling. The first was a model using SIMCRIPT based upon the determination and processing of each event at each node. The second simulation was developed in C based upon isolating the distinct object that can be identified as the ring, the message, the node, and the set of critical events. The third model further identified the basic network functionality by creating a single object, the node which includes the set of critical events which occur at the node. The ring structure is implicit in the node structure. This model was also built in C. Each model is discussed and their features compared. It should be stated that the language used was mainly selected by the model developer because of his past familiarity. Further the models were not built with the intent to compare either structure or language but because the complexity of the problem and initial results contained obvious errors, so alternative models were built to isolate, determine, and correct programming and modeling errors. The CSMA/RN protocol is discussed in sufficient detail to understand modeling complexities. Each model is described along with its features and problems. The models are compared and concluding observations and remarks are presented.

Khanna, S.↗

Use of non-geostationary orbits for a Ka-band Personal Access Satellite system

This paper discusses the use of satellites in circular orbits at altitudes high enough for continental U.S. (CONUS) visibility. This enables one satellite to relay signals between geographically separated earth stations within CONUS at any one time and thus bypasses the need for intersatellite links. System performance is examined for three circular satellite orbits at altitudes of 20,182 km, 10,353 km, and 5143 km. Inclination angles between the satellite orbit plane and the equatorial plane of 0, 45, and 90 deg are considered. The number of satellites required to provide continuous CONUS coverage is calculated.

Estabrook, Polly↗

World-wide interactive access to scientific databases via satellite and terrestrial data network

In order to demonstrate the possibilities for scientific networking and data transfer, a first temporary satellite network link was installed between Czecholovakia and the European space operations center in Darmstadt, during the meeting of the inter-agency consultative group for space science in Prague. Several experiments to show interactive nature of the facility and the capability of the system were carried out, and it was proven that, despite the temporary nature of the installation, the planned demonstrations could be conducted in real time. Demonstrations included electronic mail message, orbit prediction and solar X-ray data. The results of the experiment provided insight into possibilities of data exchange.

Sanderson, T. R.↗

A global view of lander-to-orbiter communications accessibility for a Mars Global Network Mission

Given the mission objective to deploy a number of small landers to the surface of Mars at various latitude/longitude locations, it is of interest to obtain a global perspective of the communications link geometry between the landers and a data relay orbiter. Specifically, the question to be answered is what is the total time interval over one Martian day (1 sol) that a lander at any given latitude and longitude can communicate data to the orbiter. Results should be obtained for more than one elevation angle constraint (lander antenna design issue), and also for several time points into the mission since the orbiter's periapsis location moves under the influence of Mars' oblateness perturbation. Such information is presented in terms of global contour maps of available communications time per sol summed over all orbiter pases on that day. Global data of this type complements more detailed local site data such as communications range and elevation vs time per pass. Communications time contour maps are included here for sol grids of 180, 232, 318, 361, and 404 corresponding to orbiter periapsis latitudes of 35 S, 90 S, equatorial, 45 N, and 90 N. For each of these days, there is a map for both a 15 deg and 45 deg minimum elevation constraint on the lander-to-orbiter line of sight. The jagged appearance of the contour lines is due to computational resolution in interpolating between a finite number of latitude/longitude grid points. Although the contours should really be smooth, the general information content is represented by the lower resolution maps shown here. An example of the tabulated, finite-grid data points is also given. Communication with all sites is possible at the 15 deg elevation constraint, at times only for several minutes per sol but more generally for a much longer time up to 14 hours per sol. Significantly less time is available with a 45 deg elevation constraint, and at certain times in the mission some localized regions of the planet are inaccessible. Still, one may conclude that the reference orbit selection will support a more than adequate communications link through the mission timeline with landers emplaced at any desired location on Mars.

Friedlander, Alan L.↗

Attached shuttle payload carriers: Versatile and affordable access to space

The shuttle has been primarily designed to be a versatile vehicle for placing a variety of scientific and technological equipment in space including very large payloads; however, since many large payloads do not fill the shuttle bay, the space and weight margins remaining after the major payloads are accommodated often can be made available to small payloads. The Goddard Space Flight Center (GSFC) has designed standardized mounting structures and other support systems, collectively called attached shuttle payload (ASP) carriers, to make this additional space available to researchers at a relatively modest cost. Other carrier systems for ASP's are operated by other NASA centers. A major feature of the ASP carriers is their ease of use in the world of the Space Shuttle. ASP carriers attempt to minimized the payload interaction with Space Transportation System (STS) operations whenever possible. Where this is not possible, the STS services used are not extensive. As a result, the interfaces between the carriers and the STS are simplified. With this near autonomy, the requirements for supporting documentation are considerably lessened and payload costs correspondingly reduced. The ASP carrier systems and their capabilities are discussed in detail. The range of available capabilities assures that an experimenter can select the simplest, most cost-effective carrier that is compatible with his or her experimental objectives. Examples of payloads which use ASP basic hardware in nonstandard ways are also described.

Source record↗

Laser driven launch vehicles for continuous access to space

The availability of megawatt laser systems in the next century will make laser launch systems from ground to orbit feasible and useful. Systems studies indicate launch capabilities of 1 ton payload per gigawatt laser power. Recent research in ground to orbit laser propulsion has emphasized laser supported detonation wave thrusters driven by repetitively pulsed infrared lasers. In this propulsion concept each laser repetition cycle consists of two pulses. A lower energy first pulse is used to vaporize a small amount of solid propellant and then after a brief expansion period, a second and higher energy laser pulse is used to drive a detonation wave through the expanded vapor. The results are reported of numerical studies comparing the detonation wave properties of various candidate propellants, and the simulation of thruster performance under realistic conditions. Experimental measurements designed to test the theoretical predictions are also presented. Measurements are discussed of radiance and opacity in absorption waves, and mass loss and momentum transfer. These data are interpreted in terms of specific impulse and energy conversion efficiency.

Rollins, C. J.↗

Interactive access and management for four-dimensional environmental data sets using McIDAS

Significant accomplishments in the following areas are presented: (1) enhancements to the visualization of 5-D data sets (VIS-5D); (2) development of the visualization of global images (VIS-GI) application; (3) design of the Visualization for Algorithm Development (VIS-AD) System; and (4) numerical modeling applications. The focus of current research and future research plans is presented and the following topics are addressed: (1) further enhancements to VIS-5D; (2) generalization and enhancement of the VIS-GI application; (3) the implementation of the VIS-AD System; and (4) plans for modeling applications.

Hibbard, William L.↗