Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AEROSPACE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Developing Interdisciplinary Workforce to Meet Future Aerospace Challenges

The presentation will focus on the importance of interdisciplinary research for addressing future aerospace challenges. Examples of current research activities at NASA's Glenn Research Center will be provided to illustrate the importance of interdisciplinary research. Challenges with conducting interdisciplinary research will be discussed.

Interdisciplinary↗

Revision of Paschen's Law Relating to the ESD of Aerospace Vehicle Surfaces

The purpose of this work is to develop a form of Paschen's law that takes into account the flow of gas past electrode surfaces. This work was performed under a NASA Science Innovation Fund (SIF) project at the Kennedy Space Center in collaboration with the University of Central Florida. In 2010 the Electrostatics and Surface Physics Laboratory (ESPL) at the Kennedy Space Center performed an electrostatic safety analysis on the flight termination system (FTS) antenna for the Ares I rocket. Paschen's law, derived by Friedrich Paschen in 1889 to relate sparking voltage to gas pressure and electrode separation, does not take into account the effect of flowing gas between the electrodes. The safety of the FTS housing to triboelectric charging was shown only after extensive laboratory testing. Potential benefits are of a form of Paschen's law that considers gas velocity. This work is applicable to current and planned rockets and aerospace vehicles and could lead to possible relaxation of electrostatic launch criteria. Launch aborts can cost up to about a million US dollars depending on the vehicle. [ElectroStatic Discharge (ESD)]

Paschen↗

Approaches to Difficult Aerospace Telecommunications Links

With the proliferation of local wireless and 4G cellular networks, it is often presumed that reliable and fast wireless links are commonplace. However, there are still systems that must leverage very constrained, lagged, and lossy communication links. This discussion explores aerospace systems that utilize these problematic links, the challenges of using modern protocols over these links, and how potential solutions can negatively impact the performance of the entire system.

IP↗

Reliability, Safety, and Performance for Two Aerospace Revolutions - UAS/ODM and Commercial Deep Space

Aerospace is in the midst of a renaissance, expanding on both the air and space side into major new commercial areas including unmanned air systems (UAS), on demand mobility (ODM), personal air vehicles (PAV), and commercial deep space. These new areas require, in the initial planning, consideration of new safety, reliability, and in some cases, enabling performance approaches for viability. For example, due to their huge numbers, if current accident rates prevail, UAS/ODM/PAV aircraft could crash at an unacceptable rate, causing life and property damage. Also, if humans in commercial space activities have serious health issues and/or there are unacceptable rocket viability issues/crash rates, these new, major markets (order of 1 trillion dollars per year) could be rapidly curtailed until agreeable and effective changes are instituted, producing additional expense, delay, and reduced revenue. This report addresses such safety and reliability issues and includes: performance enhancement possibilities such as an enabling Air Traffic Control System (ATC), crash proof vehicles, increased range for aero, space debris removal, and human health for space.

Crash Proof↗

Future Proofing the Aerospace Supply Chain

New aircraft, such as electric vertical take-off and landing vehicles, are being developed to support advanced air mobility. This talk will address gaps and risks in the aerospace supply chain and discuss how to identify and develop resiliency approaches.

Aerospace Supply Chain↗

Future Proofing the Aerospace Supply Chain

Presentation is to inform/update audience about NASA's role in helping to ensure a resilient Aerospace Supply Chain. This audience of manufacturers and supply chain experts are from a broad range of industry.

Aerospace Supply Chain↗

Robust Metal Additive Manufacturing Process Selection and Development for Aerospace Components

Metal additive manufacturing (AM) is a generic term that captures a variety of fabrication techniques. Each of these manufacturing process has unique advantages, applications for use, and challenges. The most common AM processes in use include Powder Bed Fusion (PBF) and Directed Energy Deposition (DED) as well as many solid state processes. While detailed research has been conducted among many of the processes including parameters and material properties, navigating which processes are best to select is difficult as it is based on component requirements. The focus of this presentation is to provide an overview of considerations for each of metal AM process selection for aerospace components based on various attributes. These attributes include geometric considerations, metallurgical characteristics, cost basis, post-processing and maturity of the processes. The data for these trade selections are based on studies that NASA as performed internally and with academic and industry partners. These studies include multiple AM build experiments to evaluate (1) geometric variations and constraints within the processes, (2) alloy characterization and mechanical testing, (3) pathfinder component development and hotfire evaluations, and (4) certification approaches. This presentation summarizes these results and meant to introduce various considerations when designing a metal AM component.

Additive Manufacturing↗

Historical Aerospace Software Errors Categorized to Influence Fault Tolerance

Since the first use of computers in space and aircraft, software errors have occurred. These errors can manifest as loss-of-life or less catastrophically. As the demand for automation increases, software in mission or safety-critical systems should be designed to be tolerant to the most likely software faults. This paper categorizes a set of 55 historic aerospace software error incidents from 1962 to 2023 to determine trends of how and where automation is most likely to fail, behaving unexpectedly. A distinction between software producing unexpected (erroneous) output versus no output (failsilent) is introduced. Of the historical incidents analyzed, 85% were from software producing wrong output rather than simply stopping. Rebooting was found to be ineffective to clear erroneous behavior, and not reliable to recover from silent failures. Error origin was within the code/logic itself in 58% of cases, 16% from configurable data, 15% from unexpected sensor input, and 11% from command/operator input. A substantial forty percent (40%) of unexpected software behavior was indicated by the absence of code, arising from unanticipated situations and missing requirements, and 16% of incidents were subjectively deemed “unknown-unknowns”. No incidents were found to be the result of programming language, compiler, tool, or operating system; and only sixteen percent (16%) of all incidents were considered errors traditional computer science/programming in nature. These findings indicate that for fault tolerance, erroneous automation behavior must be a primary consideration especially at critical moments, and reboot recoverability may not be viable. Special care should be taken to validate configurable data and commands prior to use. “Test-like-you-fly”, including hardware-in-the-loop combined with robust off-nominal testing should be used to uncover missing logic arising from unanticipated situations not covered by requirements alone. This study uniquely focuses on manifestations of unexpected flight software behavior, independent of ultimate root cause. We characterize software error behavior and origin to improve software design, test, and operations for resilience to the most common manifestations, and provide a rich dataset for further study.

Aerospace↗

Robotic Arm-based Antenna Metrology System for Aerospace Applications

Robotic antenna metrology presents interesting opportunities to investigate novel approaches to traditional antenna and communication system evaluation. In 2018 the National Aeronautics and Space Administration (NASA) Glenn Research Center (GRC) began exploring the use of robotic measurement for antenna and communication system metrology to address unique needs for traceability and in situ testing of a novel antenna for use in unmanned aerial systems (UAS). Since that initial development of the Portable Laser Guided Robotic Metrology (PLGRM) system many additional capabilities have been added to support a wide variety of aerospace applications. This paper provides an overview of the system itself, existing capabilities, benefits over other measurement approaches, and future work.

antennas, antenna patterns, measurements, aerospac↗

SafeAeroBERT: Towards a Safety-Informed Aerospace-Specific Language Model

As aviation systems continue to operate with high traffic, large amounts of documents containing safety-relevant data continue to be generated via reporting systems such as the ASRS. Advanced natural language processing techniques, specifically pre-trained language models, have shown great success in domain-specific applications; however, the text in aviation safety reports is inundated with jargon and thus not fully utilized by general pre-trained models. In this research, we work towards developing a safety-informed aerospace-specific language model by pre-training a Bidirectional Encoder Representations from Transformer (BERT) model on reports from the Aviation Safety Reporting System and the National Transportation Safety Board. The resulting model, called SafeAeroBERT, is fine-tuned for the specific task of document classification, and can be further tuned for named-entity recognition, relation detection, information retrieval, and summarization. Results from the classification task are compared between SafeAeroBERT, the base BERT, and SciBERT models and show SafeAeroBERT outperforms the general BERT and SciBERT on classifying reports about human factors, aircraft, and procedure. SafeAeroBERT can be used on custom tasks, not limited to document classification, and is intended to aid an intelligent knowledge manager for safety report repositories.

Aviation↗

2024 Sustainable Aviation Energy Conference: 5 Key Messages From the Accelerating Aerospace Technology Deployment Workshop

At the 2024 Sustainable Aviation Energy Conference, more than 100 aviation leaders gathered in Dallas, Texas, to discuss collaboration and research needed to clear the path to widespread adoption of sustainable aviation technologies. During open workshops, participants from state and federal agencies; airports; aircraft and engine manufacturers; liquid fuel producers; and other stakeholder groups brainstormed the biggest barriers and opportunities for realizing a sustainable aviation ecosystem. This fact sheets presents five key messages and discussion points that emerged during a workshop on accelerating aerospace technology deployment.

advanced air mobility↗

AFM study of the effects of laser surface remelting on the morphology of Al-Fe aerospace alloys

Laser beam welding has recently been incorporated into the fabrication process of aircraft and automobile structures. Surface roughness is an important parameter of product quality that strongly affects the performance of mechanical parts, as well as production costs. This parameter influences the mechanical properties such as fatigue behavior, corrosion resistance, creep life, etc., and other functional characteristics such as friction, wear, light reflection, heat transmission, lubrification, electrical conductivity, etc. The effects of laser surface remelting (LSR) on the morphology of Al-Fe aerospace alloys were examined before and after surface treatments, using optical microscopy (OM), scanning electron microscopy (SEM), low-angle X-ray diffraction (LA-XRD), atomic force microscopy (AFM), microhardness measurements (Vickers hardness), and cyclic voltammetry. This analysis was performed on both laser-treated and untreated sanded surfaces, revealing significant differences. The LA-XRD analysis revealed the presence of alumina, simple metals and metastable intermetallic phases, which considerably improved the microhardness of laser-remelted surfaces. The morphology produced by laser surface remelting enhanced the microstructure of the Al-Fe alloys by reducing their roughness and increasing their hardness. The treated surfaces showed passivity and stability characteristics in the electrolytic medium employed in this study. - Highlights: Black-Right-Pointing-Pointer The samples laser-treated and untreated showed significant differences. Black-Right-Pointing-Pointer The La-XRD revealed the presence of alumina in Al-1.5 wt.% Fe. Black-Right-Pointing-Pointer The laser-treated reducing the roughness and increasing the hardness. Black-Right-Pointing-Pointer The laser-treated surfaces showed characteristic passive in the electrolytic medium. Black-Right-Pointing-Pointer The laser-treated is a promising technique for applications technological.

36 MATERIALS SCIENCE↗

Capture, storage, and re-use of liquid hydrogen boil-off for aviation and aerospace applications

Despite major interest in the use of liquid hydrogen as a fuel for aviation and aerospace sectors, loss of hydrogen through boil-off continues to be a hurdle as it causes financial loss, indirect greenhouse gas emissions, and safety concerns. Herein, we perform techno-economic analysis, calibrated with experimental measurements, to assess the use of sorbents to capture and condition hydrogen boil-off events in the range of 1.5 to 70 tonnes per day at launch sites and airports. We evaluate the direct delivery of captured boil-off to combustion engines and fuel cells, comparing against boil-off re-liquification and compression. Results indicate probable cost-effectiveness at delivered liquid hydrogen prices above 0.9 U.S. dollar ($) per kg H2 at airports, and above 10 $ per kg H2 at launch sites where 10% or more of hydrogen is lost to boil-off.

08 HYDROGEN↗