Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “'Interferometer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37

Atomic interferometer measurements of Berry and Aharonov-Anandan phases for isolated spins S>(1/2) nonlinearly coupled to external fields

In a recent paper we have studied the peculiar features of the Berry and Aharonov-Anandan geometric phases for isolated spins S{>=}1. We have assumed that they are submitted to a dipole and quadrupole coupling to external E and B fields with the mild restriction E{center_dot}B=0. This implies discrete symmetries leading to remarkable simplifications of the geometry and algebra involved. The aim of the present work is to describe realistic proposals, within the realm of atomic physics, for the verification of some of our most significant theoretical predictions. There are several challenges to be overcome. For alkali-metal atoms, most commonly used in atomic interferometers, the only practical way to generate quadrupole coupling, with a strength comparable to the dipole one, is the ac Stark effect induced by a nearly resonant light beam. One then has to face the instability of the 'dressed' atom hyperfine (hf) level, a candidate for our isolated spin. One deleterious effect is the apparition of an imaginary part in the quadrupole to dipole coupling strength ratio, {lambda}. Fortunately we have found a simple way to get rid of I({lambda}) by an appropriate detuning. We are left with an unstable isolated spin. This implies an upper bound to the quantum cycle duration T{sub c}. In the case of the Berry's phase, T{sub c} has a lower bound due to the necessity of keeping the nonadiabatic corrections below a predefined level. We have found a compromise in the case of the F=2,m=0 {sup 87}Rb ground-state hf level. This is our candidate for the measurement of the somewhat ''exotic'' Berry's phase acquired by the S=2,m=0 state at the end of a quantum cycle involving a rotation of {pi} of the E field--in practice, the linear polarization of the dressing beam --about the B field direction. We have found a way to implement, in a Ramsey-type interferometric measurement, the procedures aimed at controlling the nonadiabatic corrections, as described in detail in our previous theoretical paper. A numerical simulation of our experimental proposal shows that a 0.1% accurate determination of Berry's phase, free of nonadiabatic corrections, can be achieved. Measurements could also be considered for cold {sup 52}Cr chromium atoms with S=3, where values of {lambda}{approx_equal}1 can be obtained with an instability smaller than in the {sup 87}Rb case, due to a more favorable spectroscopic structure. The F=1,m=1 hf level of the {sup 87}Rb ground state offers the opportunity to extend the measurement of Aharonov-Anandan's phases beyond the case S=(1/2). We construct, using 'light shift', the Hamiltonian H{sub ||}(t) generating a closed circuit in the density-matrix space which satisfies at any time the 'parallel transport' condition, thus making the quantum cycle free from the adiabaticity condition. We also consider the case of half-integer spins (e.g., {sup 201}Hg, {sup 135}Ba, and {sup 137}Ba), with their own specific features. We show how the difference of Berry's phases for states S=(3/2) and S=(1/2), with m=(1/2), can be exploited to achieve a holonomic maximum entanglement of three qubits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Deterministic spin-wave interferometer based on the Rydberg blockade

The spin-wave (SW) N-particle path-entangled |N,0>+|0,N> (NOON) state is an N-particle Fock state with two atomic spin-wave modes maximally entangled. Attributed to the property that the phase is sensitive to collective atomic motion, the SW NOON state can be utilized as an atomic interferometer and has promising application in quantum enhanced measurement. In this paper we propose an efficient protocol to deterministically produce the atomic SW NOON state by employing the Rydberg blockade. Possible errors in practical manipulations are analyzed. A feasible experimental scheme is suggested. Our scheme is far more efficient than the recent experimentally demonstrated one, which only creates a heralded second-order SW NOON state.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Polarization analysis of gravitational-wave backgrounds from the correlation signals of ground-based interferometers: Measuring a circular-polarization mode

The Stokes V parameter characterizes asymmetry of amplitudes between right- and left-handed waves, and the nonvanishing value of the V parameter yields a circularly polarized signal. Cosmologically, the V parameter may be a direct probe for parity violation in the Universe. In this paper, we theoretically investigate a measurement of this parameter, particularly focusing on the gravitational-wave backgrounds observed via ground-based interferometers. In contrast to the traditional analysis that only considers the total amplitude (or equivalently {omega}{sub GW}), the signal analysis including a circular-polarized mode has a rich structure due to the multidimensionality of target parameters. We show that, by using the network of next-generation detectors, separation between polarized and unpolarized modes can be performed with small statistical loss induced by their correlation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Relating gravitational wave constraints from primordial nucleosynthesis, pulsar timing, laser interferometers, and the CMB: Implications for the early universe

We derive a general equation relating the gravitational-wave observables r and {omega}{sub 0}{sup gw}(f); or the observables {omega}{sub 0}{sup gw}(f{sub 1}) and {omega}{sub 0}{sup gw}(f{sub 2}). Here, r is the so-called 'tensor-to-scalar ratio', which is constrained by cosmic-microwave-background experiments; and {omega}{sub 0}{sup gw}(f) is the energy spectrum of primordial gravitational waves, which is constrained, e.g., by pulsar-timing measurements, laser-interferometer experiments, and the standard big bang nucleosynthesis bound. Differentiating this equation yields a new expression for the tilt dln{omega}{sub 0}{sup gw}(f)/dlnf of the present-day gravitational-wave spectrum. The relationship between r and {omega}{sub 0}{sup gw}(f) depends sensitively on the uncertain physics of the early universe, and we show that this uncertainty may be encapsulated (in a model-independent way) by two quantities: w-circumflex(f) and n-circumflex{sub t}(f), where n-circumflex{sub t}(f) is a certain logarithmic average over n{sub t}(k) (the primordial tensor spectral index); and w-circumflex(f) is a certain logarithmic average over w-tilde(a) (the effective equation-of-state parameter in the early universe, after horizon re-entry). Here, the effective equation-of-state parameter w-tilde(a) is a combination of the ordinary equation-of-state parameter w(a) and the bulk viscosity {zeta}(a). Thus, by comparing observational constraints on r and {omega}{sub 0}{sup gw}(f), one obtains (remarkably tight) constraints in the {l_brace}w-circumflex(f),n-circumflex{sub t}(f){r_brace} plane. In particular, this is the best way to constrain (or detect) the presence of a stiff energy component (with w>1/3) in the early universe, prior to big bang nucleosynthesis. (The discovery of such a component would be no more surprising than the discovery of a tiny cosmological constant at late times{exclamation_point}) Finally, although most of our analysis does not assume inflation, we point out that if cosmic-microwave-background experiments detect a nonzero value for r, then we will immediately obtain (as a free by-product) a new upper bound w-circumflex < or approx. 0.55 on the logarithmically averaged effective equation-of-state parameter during the 'primordial dark age' between the end of inflation and the start of big bang nucleosynthesis.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Thermorefractive and thermochemical noise in the beamsplitter of the GEO600 gravitational-wave interferometer

Braginsky, Gorodetsky, and Vyatchanin have shown that thermorefractive fluctuations are an important source of noise in interferometric gravitational-wave detectors. In particular, the thermorefractive noise in the GEO600 beamsplitter is expected to make a substantial contribution to the interferometer's total noise budget. Here, we present a new computation of the GEO600 thermorefractive noise, which takes into account the beam's elliptical profile and, more importantly, the fact that the laser beam induces a standing electromagnetic wave in the beamsplitter. The use of updated parameters results in the overall reduction of the calculated noise amplitude by a factor of {approx}5 in the low-frequency part of the GEO600 band, compared to the previous estimates. We also find, by contrast with previous calculations, that thermorefractive fluctuations result in white noise between 600 Hz and 39 MHz, at a level of 8.5{center_dot}10{sup -24} Hz{sup -1/2}. Finally, we describe a new type of thermal noise, which we call the thermochemical noise. This is caused by a random motion of optically active chemical impurities or structural defects in the direction along a steep intensity gradient of the standing wave. We discuss the potential relevance of the thermochemical noise for GEO600.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Long gravitational-wave transients and associated detection strategies for a network of terrestrial interferometers

Searches for gravitational waves (GWs) traditionally focus on persistent sources (e.g., pulsars or the stochastic background) or on transients sources (e.g., compact binary inspirals or core-collapse supernovae), which last for time scales of milliseconds to seconds. We explore the possibility of long GW transients with unknown waveforms lasting from many seconds to weeks. We propose a novel analysis technique to bridge the gap between short O(s)''burst'' analyses and persistent stochastic analyses. Our technique utilizes frequency-time maps of GW strain cross power between two spatially separated terrestrial GW detectors. The application of our cross power statistic to searches for GW transients is framed as a pattern recognition problem, and we discuss several pattern-recognition techniques. We demonstrate these techniques by recovering simulated GW signals in simulated detector noise. We also recover environmental noise artifacts, thereby demonstrating a novel technique for the identification of such artifacts in GW interferometers. We compare the efficiency of this framework to other techniques such as matched filtering.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Magnetic Dipolar Interaction in a Bose-Einstein Condensate Atomic Interferometer

We study the role played by the magnetic dipole interaction in the decoherence of a lattice-based interferometer that employs an alkali Bose-Einstein condensate with a tunable scattering length. The different behavior we observe for two different orientations of the dipoles gives us evidence of the anisotropic character of the interaction. The experiment is correctly reproduced by a model we develop only if the long-range interaction between different lattice sites is taken into account. Our model indicates that dipolar interaction can be compensated by a proper choice of the scattering length and that the magnetic dipole interaction should not represent an obstacle for atom interferometry with Bose-Einstein condensates with a tunable interaction.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Suppression of Dephasing due to a Trapping Potential and Atom-Atom Interactions in a Trapped-Condensate Interferometer

We propose and demonstrate a novel trapped-condensate interferometer using optical Bragg diffractions in a harmonic magnetic potential, which can realize a long coherence time with low dephasing. Dephasing of wave packets due to the magnetic potential is canceled by setting the interrogation time equal to the oscillation period of the harmonic potential. The harmonic potential also helps to suppress dephasing due to condensate atom-atom interactions. An interference signal with a fringe contrast of 30% is observed at an interrogation time of 58 ms. For a longer interrogation time about 100 ms, the spatial coherence of the condensate is still maintained with low dephasing, although the interference fringe is washed out by external vibrational noise.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Robust, common path, phase shifting interferometer and optical profilometer

We describe an improved implementation of our previously reported common-path, phase shifting, and shearing interferometer. Using a time-multiplexed phase shifting scheme, we demonstrate higher sampling resolution, better light sensitivity, and use of arbitrary phase shifting algorithms. We describe microscopic imaging of the surface profile of a copper-plated silicon wafer and demonstrate that the system is vibration insensitive with {approx}{lambda}/100repeatability. In a more general discussion of our method, we describe the different functional elements and suggest alternative designs and improvements. Possible uses include full-field coherent imaging and high dynamic range wavefront sensing, which we briefly discuss.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tilt sensitivity of the two-grating interferometer

Fringe formation in the two-grating interferometer is analyzed in the presence of a small parallelism error between the diffraction gratings assumed in the direction of grating shear. Our analysis shows that with partially coherent illumination, fringe contrast in the interference plane is reduced in the presence of nonzero grating tilt with the effect proportional to the grating tilt angle and the grating spatial frequencies. Our analysis also shows that for a given angle between the gratings there is an angle between the final grating and the interference plane that optimizes fringe contrast across the field.

36 MATERIALS SCIENCE↗

Measurement of two-dimensional small angle deviation with a prism interferometer

A new technique for the measurement of two-dimensional small angular deviation is presented. A compound prism, which effectively produces a combination of two right-angled prisms in orthogonal directions, and plane reference surfaces have been utilized for the measurement of the orthogonal components of the angular tilt of an incident plane wavefront. Each orthogonal component of the angular tilt is separately measured from the angular rotation of the resultant wedge fringes between two plane wavefronts generated due to splitting of the incident plane wavefront by the corresponding set of right-angled prism and plane reference surface. The technique is shown to have high sensitivity for the measurement of small angle deviation. A monolithic prism interferometer, which is practically insensitive to vibration, is also proposed. Results obtained for the measurement of a known tilt angle are presented.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanodisplacement measurement using spectral shifts in a white-light interferometer

We report a novel experimental method to measure nanometer displacements using wavelength shifts of spectral peaks around spectral switch or singular phase points in the interference spectra due to temporal correlation in a Michelson interferometer illuminated by a broadband white-light source. Dramatic changes in the spectral characteristics are recorded as a function of path difference between the interfering beams around the spectral switch position. These are then compared with measurements far from it in order to demonstrate the higher sensitivities involved in the proposed method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excess noise reduction by optical technique in amplitude-sensitive heterodyne interferometer for small differential phase detection

An amplitude-sensitive technique associated with a heterodyne interferometer for detecting small differential phase is reported. The excess noise with the amplitude-sensitive technique is reduced by optical subtraction instead of electronic subtraction. The differential phase introduced by the orthogonally polarized laser beams is converted to the amplitudes of two heterodyne interferometric signals, which presents amplitude and phase quadrature simultaneously. Thus the excess noise power and quantum noise power are both differential phase dependent. The advantages of differential and additive operations by optical technique and the real time differential phase determination without phase lock in are demonstrated experimentally. The theoretical signal-to-noise ratio (SNR) and minimum detectable differential phase are derived, which takes quantum noise and excess noise into consideration. The experimental results demonstrated the resolutions of differential phase detection closes to 10{sup -6} rad/{radical}Hz (10{sup -13} m/{radical}Hz) level over 100 kHz bandwidth and at 10{sup -8} rad/{radical}Hz (10{sup -15} m/{radical}Hz) level over 125 MHz bandwidth, respectively, under 2.5 mW incident power.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-accuracy interferometer with a prism pair for measurement of the absolute refractive index of glass

We propose a variable-path interferometric technique for the measurement of the absolute refractive index of optical glasses. We use two interferometers to decide the ratio between changes in the optical path in a prism-shaped sample glass and in air resulting from displacement of the sample. The method allows precise measurements to be made without prior knowledge of the properties of the sample. The combined standard uncertainty of the proposed method is 1.6x10{sup -6}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Achromatic digital speckle pattern interferometer with constant radial in-plane sensitivity by using a diffractive optical element

We report on a digital speckle pattern interferometer that applies a binary diffractive optical element (DOE) to generate double illumination and radial in-plane sensitivity. The application of the DOE ensures independence on the wavelength of the laser used as an illumination source. Furthermore, in-plane sensitivity only depends on the grating period of the DOE. An experimental setup was built allowing the measurement of a set of radial in-plane displacement fields either using a red laser as a light source or a green one. When displacement fields computed from the measured optical phase maps obtained with a red or a green laser were compared, two main results were observed: (a) deviations between mean values ranged only up to 7 nm and (b) phase maps presented the same amount of fringes. In addition, phase maps measured with the red laser were processed as they were obtained with green light. For this case, deviations have ranged only up to 0.5 nm. On the other hand, a set of measurements performed changing the DOE by a conical mirror showed clearly that radial in-plane sensitivity increased when the red laser was changed by the green one.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Disturbance-free phase-shifting laser diode interferometer using adaptive feedback control

A feedback-control-equipped phase-shifting laser diode interferometer that eliminates external disturbance is proposed. The feedback loop is stabilized by adaptive control of the polarity of the interference signal. Conventional phase-shifting interferometry can be used with the feedback control, resulting in simplified signal processing and accurate measurement. Several experiments confirm the stability of the feedback control with a measurement repeatability of 1.8 nm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Shot-noise-limited control-loop noise in an interferometer with multiple degrees of freedom

Precise measurements, such as those made with interferometric gravitational-wave detectors, require the measurement device to be properly controlled so that the sensitivity can be as high as possible. Mirrors in the interferometer are to be located at specific operation points to isolate laser noise and to accumulate the signal in resonant cavities. On the other hand, rigid control of an auxiliary degree of freedom may result in imposing sensing noise of the control on the target object as excess force noise. Evaluation of this so-called loop noise is important in order to design a decent control scheme of the measurement device. In this paper, we show the method to calculate the level of loop noise, which has been recently implemented in simulation tools that are broadly used for designing gravitational-wave detectors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗