Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variable selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Quantifying nitrogen loss hotspots and mitigation potential for individual fields in the US Corn Belt with a metamodeling approach

The high productivity in the US Corn Belt is largely enabled by the consumption of millions of tons of manufactured fertilizer. Excessive application of nitrogen (N) fertilizer has been pervasive in this region, and the unrecovered N eventually escaped from croplands in forms of nitrous oxide (N 2 O) emission and N leaching. Mitigating these negative impacts is hindered by a lack of practical information on where to focus and how much mitigation potential to expect. At a large scale, process-based crop models are the primary tools for predicting variables required by decision making, but their applications are prohibited by expensive computational and data storage costs. To overcome these challenges, we built a series of metamodels to learn the key mechanisms regarding the carbon (C) and N cycle from a well-validated process-based biogeochemical model, ecosys. The trained metamodel captures over 98% of the variability of the ecosys simulated outputs for 99 randomly selected counties in Iowa, Illinois, and Indiana. To identify hotspots with high mitigation potential, we introduce net societal benefit (NSB) as an indicator for synthesizing the loss in yield and social benefits through emissions and pollutants avoided. Our results show that reducing N fertilizer by 10% leads to 9.8% less N 2 O emissions and 9.6% less N leaching at the cost of 4.9% more SOC depletion and 0.6% yield reduction over the study region. The estimated total annual NSB is $\$395$ M (uncertainty ranges from $\$114$ M to $\$1271$ M), including $\$334$ from social benefits (uncertainty ranges from $\$46$ M to $\$1076$ M), $\$100$ M from saving fertilizer (uncertainty ranges from $\$13$ M to $\$455$ M), and –$\$40$ M due to yield changes (uncertainty ranges from –$\$261$ M to $\$69$ M). For the median scenario, we noted that 20% of the study area accounts for nearly 50% of the NSB, and thus represent hotspot locations for targeted mitigation. Although the uncertainty range suggests that developing such a high-resolution framework is not yet settled and the scenario based estimations are not appropriate to inform the management practices for individual farmers, our efforts shed light on the new generation of analytical tools for life cycle assessment.

54 ENVIRONMENTAL SCIENCES↗

Viability, behavior, and color expression in the offspring of matings between common wall lizard Podarcis muralis color morphs

Abstract Color polymorphisms are widely studied to identify the mechanisms responsible for the origin and maintenance of phenotypic variability in nature. Two of the mechanisms of balancing selection currently thought to explain the long-term persistence of polymorphisms are the evolution of alternative phenotypic optima through correlational selection on suites of traits including color and heterosis. Both of these mechanisms can generate differences in offspring viability and fitness arising from different morph combinations. Here, we examined the effect of parental morph combination on fertilization success, embryonic viability, newborn quality, antipredator, and foraging behavior, as well as inter-annual survival by conducting controlled matings in a polymorphic lacertid Podarcis muralis, where color morphs are frequently assumed to reflect alternative phenotypic optima (e.g., alternative reproductive strategies). Juveniles were kept in outdoor tubs for a year in order to study inter-annual growth, survival, and morph inheritance. In agreement with a previous genome-wide association analysis, morph frequencies in the year-old juveniles matched the frequencies expected if orange and yellow expressions depended on recessive homozygosity at 2 separate loci. Our findings also agree with previous literature reporting higher reproductive output of heavy females and the higher overall viability of heavy newborn lizards, but we found no evidence for the existence of alternative breeding investment strategies in female morphs, or morph-combination effects on offspring viability and behavior. We conclude that inter-morph breeding remains entirely viable and genetic incompatibilities are of little significance for the maintenance of discrete color morphs in P. muralis from the Pyrenees.

Abalos, Javier↗

Protoplast fusion in Bacillus species produces frequent, unbiased, genome-wide homologous recombination

Abstract In eukaryotes, fine-scale maps of meiotic recombination events have greatly advanced our understanding of the factors that affect genomic variation patterns and evolution of traits. However, in bacteria that lack natural systems for sexual reproduction, unbiased characterization of recombination landscapes has remained challenging due to variable rates of genetic exchange and influence of natural selection. Here, to overcome these limitations and to gain a genome-wide view on recombination, we crossed Bacillus strains with different genetic distances using protoplast fusion. The offspring displayed complex inheritance patterns with one of the parents consistently contributing the major part of the chromosome backbone and multiple unselected fragments originating from the second parent. Our results demonstrate that this bias was in part due to the action of restriction–modification systems, whereas genome features like GC content and local nucleotide identity did not affect distribution of recombination events around the chromosome. Furthermore, we found that recombination occurred uniformly across the genome without concentration into hotspots. Notably, our results show that species-level genetic distance did not affect genome-wide recombination. This study provides a new insight into the dynamics of recombination in bacteria and a platform for studying recombination patterns in diverse bacterial species.

59 BASIC BIOLOGICAL SCIENCES↗

TroR is the primary regulator of the iron homeostasis transcription network in the halophilic archaeon Haloferax volcanii

Abstract Maintaining the intracellular iron concentration within the homeostatic range is vital to meet cellular metabolic needs and reduce oxidative stress. Previous research revealed that the haloarchaeon Halobacterium salinarum encodes four diphtheria toxin repressor (DtxR) family transcription factors (TFs) that together regulate the iron response through an interconnected transcriptional regulatory network (TRN). However, the conservation of the TRN and the metal specificity of DtxR TFs remained poorly understood. Here we identified and characterized the TRN of Haloferax volcanii for comparison. Genetic analysis demonstrated that Hfx. volcanii relies on three DtxR transcriptional regulators (Idr, SirR, and TroR), with TroR as the primary regulator of iron homeostasis. Bioinformatics and molecular approaches revealed that TroR binds a conserved cis-regulatory motif located ∼100 nt upstream of the start codon of iron-related target genes. Transcriptomics analysis demonstrated that, under conditions of iron sufficiency, TroR repressed iron uptake and induced iron storage mechanisms. TroR repressed the expression of one other DtxR TF, Idr. This reduced DtxR TRN complexity relative to that of Hbt. salinarum appeared correlated with natural variations in iron availability. Based on these data, we hypothesize that variable environmental conditions such as iron availability appear to select for increasing TRN complexity.

59 BASIC BIOLOGICAL SCIENCES↗

From Depletion to Restoration: Lessons From Long‐Term Monitoring of Carbon Gains and Losses in Cropping Systems

As global atmospheric CO 2 rapidly approaches a key tipping point, there is an urgent need to implement strategies to reverse this pattern. A generally accepted understanding of carbon (C) in agricultural fields includes: (H1) substantial C loss occurs when natural vegetation is converted to crops, (H2) soils typically reach a steady-state C concentration under contemporary practices, and (H3) improved management or crop selection can enhance soil C stocks over time. Significant variability exists, but studies consistently show large C losses from agricultural ecosystems, supporting H1. Although steady-state C levels (H2) are commonly assumed, measuring C gains or losses in mature agroecosystems is challenging. Efforts to increase soil C storage (H3) have limited data due to the diversity of potential practices, compounded by substantial variability in soil C measurements. Here, long-term (7–17 year) ecosystem C flux data from diverse cropping systems revealed that conventionally tilled annual row crops (maize and soybean) act as significant long-term atmospheric C sources, challenging H2. Furthermore, conservation tillage practices reduced C losses compared with conventional tillage but showed minimal evidence for long-term ecosystem C storage, even after 20+ years. This indicates that no-till practices reduce C losses but imply that no soil C is added, challenging H3. By contrast, perennial Miscanthus × giganteus, Panicum virgatum, and restored tallgrass prairie systems store C at the ecosystem scale more effectively than minimally tilled annual row crops. Analysis over multiple years demonstrates significant ecosystem C storage with perennial crops, varying by species, starting in the first year of transition. These findings, although focused on one region, suggest that the assumptions of steady-state C levels and increased storage from conservation practices do not universally apply and that significant changes to agroecosystems are required to increase C storage.

59 BASIC BIOLOGICAL SCIENCES↗

Dynamic power load simulator

Two independent models simulate dynamic and steady-state responses of electrical and electronic equipment under power load. One is resistance/capacitance/inductance network, and the other is variable resistance analog device. Resistance, inductance, and/or capacitance are selected by iterative process; time-domain response is compared with that of real equipment to select optimal values.

Joncas, K. P.↗

Low-sensitivity, frequency-selective amplifier circuits for hybrid and bipolar fabrication.

A network is described which is suitable for realizing a low-sensitivity high-Q second-order frequency-selective amplifier for high-frequency operation. Circuits are obtained from this network which are well suited for realizing monolithic integrated circuits and which do not require any process steps more critical than those used for conventional monolithic operational and video amplifiers. A single chip version using compatible thin-film techniques for the frequency determination elements is then feasible. Center frequency and bandwidth can be set independently by trimming two resistors. The frequency selective circuits have a low sensitivity to the process variables, and the sensitivity of the center frequency and bandwidth to changes in temperature is very low.

Pi, C.↗

Flight experience with a digital integrated propulsion control system on an F-111E airplane

A digital integrated propulsion control system (IPCS) installed in the left side of an F-111 E aircraft was tested in flight. The F-111 aircraft was selected for the IPCS program because it incorporated a variable geometry inlet and an afterburning turbofan engine and had two engines, one of which could remain in the normal configuration to ensure flight safety. Flight data were compared with results of tests run in an altitude test chamber. The digital system was found to be capable of duplicating the standard engine and inlet control systems. Instabilities such as inlet buzz and afterburner rumble were detected and controlled. The usefulness of an altitude chamber for developing a software and testing hardware was proven. The flexibility of IPCS was demonstrated when an autothrottle, an in-flight thrust calculation, and a coannular noise study capability were added at the end of the flight tests.

Burcham, F. W., Jr.↗

A method to estimate weight and dimensions of aircraft gas turbine engines. Volume 1: Method of analysis

Weight and envelope dimensions of aircraft gas turbine engines are estimated within plus or minus 5% to 10% using a computer method based on correlations of component weight and design features of 29 data base engines. Rotating components are estimated by a preliminary design procedure where blade geometry, operating conditions, material properties, shaft speed, hub-tip ratio, etc., are the primary independent variables used. The development and justification of the method selected, the various methods of analysis, the use of the program, and a description of the input/output data are discussed.

Pera, R. J.↗

Computational modeling of multispectral remote sensing systems: Background investigations

A computational model of the deterministic and stochastic process of remote sensing has been developed based upon the results of the investigations presented. The model is used in studying concepts for improving worldwide environment and resource monitoring. A review of various atmospheric radiative transfer models is presented as well as details of the selected model. Functional forms for spectral diffuse reflectance with variability introduced are also presented. A cloud detection algorithm and the stochastic nature of remote sensing data with its implications are considered.

Aherron, R. M.↗

Development and validation of a general purpose linearization program for rigid aircraft models

A FORTRAN program that provides the user with a powerful and flexible tool for the linearization of aircraft models is discussed. The program LINEAR numerically determines a linear systems model using nonlinear equations of motion and a user-supplied, nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both the state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model. Also, included in the report is a comparison of linear and nonlinear models for a high performance aircraft.

Duke, E. L.↗

Development and validation of a general purpose linearization program for rigid aircraft models

This paper discusses a FORTRAN program that provides the user with a powerful and flexible tool for the linearization of aircraft models. The program LINEAR numerically determines a linear systems model using nonlinear equations of motion and a user-supplied, nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both the state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model. Also, included in the report is a comparison of linear and nonlinear models for a high-performance aircraft.

Duke, E. L.↗

User's manual for LINEAR, a FORTRAN program to derive linear aircraft models

This report documents a FORTRAN program that provides a powerful and flexible tool for the linearization of aircraft models. The program LINEAR numerically determines a linear system model using nonlinear equations of motion and a user-supplied nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model.

Duke, Eugene L.↗

User's manual for interactive LINEAR: A FORTRAN program to derive linear aircraft models

An interactive FORTRAN program that provides the user with a powerful and flexible tool for the linearization of aircraft aerodynamic models is documented in this report. The program LINEAR numerically determines a linear system model using nonlinear equations of motion and a user-supplied linear or nonlinear aerodynamic model. The nonlinear equations of motion used are six-degree-of-freedom equations with stationary atmosphere and flat, nonrotating earth assumptions. The system model determined by LINEAR consists of matrices for both the state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model.

Antoniewicz, Robert F.↗

An approximation based global optimization strategy for structural synthesis

A global optimization strategy for structural synthesis based on approximation concepts is presented. The methodology involves the solution of a sequence of highly accurate approximate problems using a global optimization algorithm. The global optimization algorithm implemented consists of a branch and bound strategy based on the interval evaluation of the objective function and constraint functions, combined with a local feasible directions algorithm. The approximate design optimization problems are constructed using first order approximations of selected intermediate response quantities in terms of intermediate design variables. Some numerical results for example problems are presented to illustrate the efficacy of the design procedure setforth.

Sepulveda, A. E.↗

The new BL Lacertae objects discovered by an efficient X-ray/radio/optical technique

We report the recent discovery of ten BL Lac objects in the Einstein IPC Slew Survey by means of X-ray/radio versus X-ray/optical color-color diagrams and confirming optical spectroscopy. These ten BL Lac objects were discovered using a technique proposed by Stocke et al. (1989) which exploits the characteristic broad-band spectra of BL Lac objects. New VLA detections provide accurate fluxes (limiting f(6 cm) about 0.5 mJy) and about 1 arcsec positions, facilitating the determination of an optical counterpart. All ten new BL Lac objects show essentially featureless optical spectra and lie within the range of radio/X-ray/optical colors of known X-ray-selected BL Lac objects, when about 1 mag optical variability is included. We expect about 50 new BL Lac objects in total, from complete optical follow-up of our now completed VLA work and recent Australia Telescope observations, yielding a complete Slew Survey sample of about 90 BL Lac objects.

Schachter, Jonathan F.↗

Loiter performance of turbojet-powered aircraft performance determined by off-design cycle analysis

Loitering performance of airplanes equipped with various turbojet engines was analytically investigated. The engines used in this analysis were selected to show the effects of various engine design variables. Engine performance was determined by means of an off-design cycle analysismaking use of experimentally determined component characteristics. The method of off-design cycle analysis is presented herein and is verified by a check with experimental data.

Koutz, Stanley L↗

Validating a large geophysical data set: Experiences with satellite-derived cloud parameters

We are validating the global cloud parameters derived from the satellite-borne HIRS2 and MSU atmospheric sounding instrument measurements, and are using the analysis of these data as one prototype for studying large geophysical data sets in general. The HIRS2/MSU data set contains a total of 40 physical parameters, filling 25 MB/day; raw HIRS2/MSU data are available for a period exceeding 10 years. Validation involves developing a quantitative sense for the physical meaning of the derived parameters over the range of environmental conditions sampled. This is accomplished by comparing the spatial and temporal distributions of the derived quantities with similar measurements made using other techniques, and with model results. The data handling needed for this work is possible only with the help of a suite of interactive graphical and numerical analysis tools. Level 3 (gridded) data is the common form in which large data sets of this type are distributed for scientific analysis. We find that Level 3 data is inadequate for the data comparisons required for validation. Level 2 data (individual measurements in geophysical units) is needed. A sampling problem arises when individual measurements, which are not uniformly distributed in space or time, are used for the comparisons. Standard 'interpolation' methods involve fitting the measurements for each data set to surfaces, which are then compared. We are experimenting with formal criteria for selecting geographical regions, based upon the spatial frequency and variability of measurements, that allow us to quantify the uncertainty due to sampling. As part of this project, we are also dealing with ways to keep track of constraints placed on the output by assumptions made in the computer code. The need to work with Level 2 data introduces a number of other data handling issues, such as accessing data files across machine types, meeting large data storage requirements, accessing other validated data sets, processing speed and throughput for interactive graphical work, and problems relating to graphical interfaces.

Kahn, Ralph↗