Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vapor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Forced convection heat transfer to air/water vapor mixtures

Heat transfer coefficients were measured using both dry air and air/water vapor mixtures in the same forced convection cooling test rig (jet array impingement configurations) with mass ratios of water vapor to air up to 0.23. The primary objective was to verify by direct experiment that selected existing methods for evaluation of viscosity and thermal conductivity of air/water vapor mixtures could be used with confidence to predict heat transfer coefficients for such mixtures using as a basis heat transfer data for dry air only. The property evaluation methods deemed most appropriate require as a basis a measured property value at one mixture composition in addition to the property values for the pure components.

Richards, D. R.↗

Measurements of mesospheric water vapor in 1984 and 1985 - Results and implications for middle atmospheric transport

The detailed results of ground-based mesospheric water vapor measurements obtained by microwave spectroscopy at the Jet Propulsion Laboratory (JPL) from December 1984 to April 1985 (JPL 1984/85), and an overview of results obtained the previous year from April to June 1984 are presented. The JPL 1984/85 spectral data appeared to contain an instrumental baseline curvature which was bracketed and removed. In general, the JPL 1984/85 results are in good agreement with those of previous measurements. They indicate water vapor mixing ratios between 6 and 8 ppmv at 60 or 65 km and falling off steeply with height above this point to values of less than 2 ppmv at 80 km. In addition, there is a large amount of day-to-day variability indicated in the data. A major result of the study is that it is found that both the observed vertical gradient of water vapor mixing ratio and its seasonal variation are consistent with the hypothesis that vertical transport time scales are smaller, perhaps by an order of magnitude, than values currently used in both one- and two-dimensional photochemical/dynamical models.

Bevilacqua, Richard M.↗

Advancements in oxygen generation and humidity control by water vapor electrolysis

Regenerative processes for the revitalization of manned spacecraft atmospheres or other manned habitats are essential for realization of long-term space missions. These processes include oxygen generation through water electrolysis. One promising technique of water electrolysis is the direct conversion of the water vapor contained in the cabin air to oxygen. This technique is the subject of the present program on water vapor electrolysis development. The objectives were to incorporate technology improvements developed under other similar electrochemical programs and add new ones; design and fabricate a mutli-cell electrochemical module and a testing facility; and demonstrate through testing the improvements. Each aspect of the water vapor electrolysis cell was reviewed. The materials of construction and sizing of each element were investigated analytically and sometime experimentally. In addition, operational considerations such as temperature control in response to inlet conditions were investigated. Three specific quantitative goals were established.

Heppner, D. B.↗

A review of melt and vapor growth techniques for polydiacetylene thin films for nonlinear optical applications

Methods for the growth of polydiacetylene thin films by melt and vapor growth and their subsequent polymerization are summarized. Films with random orientations were obtained when glass or quartz were used as substrates in the vapor growth process. Oriented polydiacetylene films were fabricated by the vapor deposition of diacetylene monomer onto oriented polydiacetylene on a glass substrate and its subsequent polymerization by UV light. A method for the growth of oriented thin films by a melt-shear growth process as well as a method of film growth by seeded recrstallization from the melt between glass plates, that may be applied to the growth of polydiacetylene films, are described. Moreover, a method is presented for the fabrication of single crystal thin films of polyacetylenes by irradiation of the surface of diacetylene single crystals to a depth between 100 and 2000 angstroms.

Penn, B. G.↗

Mass spectroscopic characterization of the GeSe:GeI4 vapor transport system

The GeSe:GeI4 vapor crystal growth system was characterized mass spectroscopically. A steady-state Knudsen effusion technique was developed to simulate the equilibrium conditions at one end of a vapor transport ampoule. It was found that the previously neglected equilibrium GeSe2(s) = GeSe(v) + 1/2Se2(v) reduces the Se2(v) concentration to an extent that sublimation/condensation of GeSe becomes the dominant transport mechanism. At total pressures near 1 atm the concentration of an additional Ge-Se-I vapor species becomes comparable to that of GeSe(v).

Buchan, Nicholas I.↗

Droplet Vaporization in a Supercritical Microgravity Environment

A model is presented which describes single liquid droplet vaporization at nearly critical liquid pressures and temperatures. A modified Redlich-Kwong equation of state is used to evaluate the fugacities and liquid and vapor mole fractions at the interface under the assumption of interface equilibrium. Results obtained for different droplet sizes and conditions indicate significant differences in behavior in comparison with low-pressure quasi-steady droplet vaporization.

Curtis, E. W.↗

Discovery of sodium and potassium vapor in the atmosphere of the moon

A ground-based telescopic study of the lunar surface with high resolution spectroscopy has led to the discovery of sodium and potassium vapor 'atmospheres'. The scale height for the sodium atmosphere is 120 + or - 42 km, and for potassium 90 + or - 20 km; these values imply that the effective temperature of the two elements closely approximates that of the lunar surface. The sodium density at the south polar region is similar to that at the subsolar point, indicating widespread distribution of the vapor. The ratio of sodium to potassium densities, at 6 (+ or - 3):1, is close to the lunar surface ratio and suggests that the atmosphere originated in the vaporization of surface minerals.

Potter, A. E.↗

Vapor concentration measurement with photothermal deflectometry

Theoretical and experimental results for using the photothermal deflection technique to measure vapor species concentration, while minimizing the disturbance of the transport (material) parameters due to vapor heating, are developed and described. In contrast to common practice, the above constraints require using a pump-beam duty cycle of less than 50 percent. The theoretical description of the shortened heating time is based on a step-function formulation of the pumping cycle. The results are obtained as closed-form solutions of the energy equation for many chopping cycles until steady state is reached, by use of a Green's-function method. The Euler formulation of the Fermat principle is used to calculate the deflection angle. The equations are expanded to include the effects of vapor velocity on both the temperature and temperature gradient profiles. The effects of finite (unfocused) pump and probe beams and thermal (Soret) diffusion are also accounted for. Excellent agreement between theory and experiment is obtained.

Banish, R. Michael↗

The observed day-to-day variability of Mars water vapor

The diurnal variability of atmospheric water vapor as derived from the Viking MAWD data is discussed. The detection of day to day variability of atmospheric water would be a significant finding since it would place constraints on the nature of surface reservoirs. Unfortunately, the diurnal variability seen by the MAWD experiment is well correlated with the occurrence of dust and/or ice hazes, making it difficult to separate real variations from observational effects. Analysis of the day to day variability of water vapor in the Martian atmosphere suggests that the observations are, at certain locations and seasons, significantly affected by the presence of water-ice hazes. Because such effects are generally limited to specific locations, such as Tharsis, Lunae Planum, and the polar cap edge during the spring, the seasonal and latitudinal trends in water vapor that have been previously reported are not significantly affected.

Jakosky, Bruce M.↗

Retrieval of water vapor profiles from microwave radiometric measurements at 183 and 92 GHz

Microwave radiometric measurements made from an aircraft altitude of 20 km at 183.3 + or - 2, 183.3 + or - 5, and 183.3 + or - GHz, and at 92 GHz were used to retrieve the atmospheric water vapor profiles. Retrieval techniques shown to function properly in cloudfree conditions, were improved and extended to profile water vapor under moderate cloud cover conditions. The retrieved water vapor profiles compare favorably with those of rawinsonde observations at times nearly concurrent with the radiometric measurements.

Wang, J. R.↗

Flux of water vapor in the terrestrial stratosphere and in the Martian atmosphere

A summary of the terrestrial satellite data is presented. The observations indicate that at equatorial latitudes, relatively dry air is introduced at the tropopause and carried to the upper stratosphere. At that altitude, any methane present in the ascending air mass is oxidized photochemically into water vapor. This vapor is eventually transported to high latitudes, where it is carried to the lower stratosphere by the descending leg of the diabatic circulation. The Pressure Modulator Infrared Radiometer instrument aboard the Mars Observer should provide a comparable picture of vapor transport in the martian atmosphere.

Leovy, Conway↗

Production of sodium vapor from exposed regolith in the inner solar system

The likely supply of sodium to the lunar exosphere by impact vaporization, by charged particle sputtering, and by photon stimulated desorption has been calculated. These were each compared to the supply of sodium needed to maintain the observed sodium exosphere about the Moon. The two processes already known to act on the lunar regolith, impact vaporization and charged particle sputtering, appear to be sufficient to explain the observed column density of sodium in the lunar atmosphere. Photon-stimulated desorption, given the estimates for the yield of sodium due to this process available in the literature, would produce 100 to 1000 times more sodium than is observed. If impact vaporization is the main source of sodium to the atmosphere of Mercury, then sodium photo-ions in the exosphere of Mercury are efficiently recycled to the planet.

Morgan, T. H.↗

Mesospheric water vapor measurements from Penn State - Monthly mean observations (1984-1987)

Mesospheric water vapor measurements obtained by ground-based microwave spectroscopy between November 1984 and July 1987 are examined. Monthly mean water vapor profiles are used to establish annual and interannual variability. The results suggest that the seasonal variation of upper mesospheric water vapor is dominated by an annual component with low mixing ratios in winter and high mixing ratios in summer. The results are compared with those reported by Bevilacqua et al. (1987).

Bevilacqua, Richard M.↗

An opacity-sampled treatment of water vapor

Although the bands of H2O are strong in the spectra of cool stars and calculations have repeatedly demonstrated their significance as opacity sources, only approximate opacities are currently available, due both to the difficulty of accounting for the millions of lines involved and to the inadequacy of laboratory and theoretical data. To overcome these obstacles, a new treatment is presented, based upon a statistical representation of the water vapor spectrum derived from available laboratory data. This statistical spectrum of water vapor employs an exponential distribution of line strengths and random positions of lines whose overall properties are forced to reproduce the mean opacities observed in the laboratory. The resultant data set is then treated by the opacity-sampling method exactly as are all other lines, both molecular and atomic. Significant differences are found between the results of this improved treatment and the results obtained with previous treatments of water-vapor opacity.

Alexander, David R.↗

Universal adsorption at the vapor-liquid interface near the consolute point

The ellipticity of the vapor-liquid interface above mixtures of methylcyclohexane (C7H14) and perfluoromethylcyclohexane (C7F14) has been measured near the consolute point T(c) = 318.6 K. The data are consistent with a model of the interface that combines a short-ranged density-vs height profile in the vapor phase with a much longer-ranged composition-versus-height profile in the liquid. The value of the free parameter produced by fitting the model to the data is consistent with results from two other simple mixtures and a mixture of a polymer and solvent. This experiment combines precision ellipsometry of the vapor-liquid interface with in situ measurements of refractive indices of the liquid phases, and it precisely locates the consolute point.

Schmidt, James W.↗

A comparison of ER-2 measurements of stratospheric water vapor between the 1987 Antarctic and 1989 Arctic Airborne missions

Vertical profiles of water vapor inside the Antarctic vortex have been compared with those taken outside it over Punta Arenas (53 deg S, 71 deg W). A similar exercise was performed with Arctic vortex profiles and those taken over Stavanger (59 deg N, 6 deg E). Residual water, defined as the stratospheric water vapor mixing ratio with the contribution from methane oxidation subtracted, is also shown as profiles inside and outside the vortex for both missions. The Arctic and Antarctic profiles of water vapor and residual water are compared. Locally dehydrated air was evident both inside and outside the Antarctic vortex, but such dehydration was not evident in and around the Arctic vortex. Arctic profiles of residual water are consistent with nontropical entry for some air.

Kelly, K. K.↗

Observation of a strong inverse temperature dependence for the opacity of atmospheric water vapor in the mm continuum near 280 GHz

Results are presented of the field measurements of atmospheric opacity at 278 GHz (9.3/cm) conducted at the McMurdo Station (Antarctica) during the austral springs of 1986 and 1987, in conjunction with balloon measurements of water vapor profile and total column density, showing a strong inverse temperature dependence when normalized to precipitable water vapor. The value of measured opacity per mm of precipitable water vapor (PWV) is roughly two times greater at -35 C than at -10 C and three times greater than measurements at +25 C reported by Zammit and Ade (1981). Various theories proposed to explain excess absorption in continuum regions are reviewed.

Emmons, Louisa K.↗

LOX vaporization in high-pressure, hydrogen-rich gas

LOX droplet vaporization in high-pressure hydrogen-rich gas is analyzed, with special attention to thermodynamic effects which compel the surface to heat to the critical state and to supercritical vaporization processes on heating to criticality. Subcritical vaporization is modeled using a quasi-steady diffusion-controlled gas-phase transport formulation coupled to an effective-conductivity internal-energy-transport model accounting for circulation effects. It is demonstrated how the droplet surface might heat to the critical state, for ambient pressures slightly greater than the critical pressure of oxygen, such that the bulk of propellant within the droplet remains substantially below the critical mixing temperature.

Litchford, Ron J.↗