Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “theoretical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

An exactly solvable model for calculating critical misfit and thickness in epitaxial superlattices. II - Layers of unequal elastic constants and thicknesses

The theoretical model developed by van der Merwe and Jesser (1988) is extended to permit the exact determination of the critical misfit and critical thickness of an epitaxially grown superlattice made up of layers with differing elastic constants and thicknesses. Lateral force balances are maintained by means of an explicit relationship between the homogeneous misfit strains and the thicknesses and moduli. A number of simplifying approximations are introduced, and sample numerical results are presented in graphs.

Jesser, W. A.↗

Comparison of Integrated Radiation Transport Models with TEPC Measurements for the Average Quality Factors in Spaceflights

The purpose of this work is to test our theoretical model for the interpretation of radiation data measured in space. During the space missions astronauts are exposed to the complex field of radiation type and kinetic energies from galactic cosmic rays (GCR), trapped protons, and sometimes solar particle events (SPEs). The tissue equivalent proportional counter (TEPC) is a simple time-dependent approach for radiation monitoring for astronauts on board the International Space Station. Another and a newer approach to Microdosimetry is the use of silicon-on-insulator (SOI) technology launched on the MidSTAR-1 mission in low Earth orbit (LEO). In the radiation protection practice, the average quality factor of a radiation field is defined as a function of linear energy transfer (LET), Q(sub ave)(LET). However, TEPC measures the average quality factor as a function of the lineal energy y, Q(sub ave)(y), defined as the average energy deposition in a volume divided by the average chord length of the volume. Lineal energy, y, deviates from LET due to energy straggling, delta-ray escape or entry, and nuclear fragments produced in the detector volume. Monte Carlo track structure simulation was employed to obtain the response of a TEPC irradiated with charged particle for an equivalent site diameter of 1 micron of wall-less counter. The calculated data of the energy absorption in the wall-less counter were compiled for various y values for several ion types at various discrete projectile energy levels. For the simulation of TEPC response from the mixed radiation environments inside a spacecraft, such as, Space Shuttle and International Space Station, the complete microdosimetric TEPC response, f( y, E, Z), were calculated with the Monte Carlo theoretical results by using the first order Lagrangian interpolation for a monovariate function at a given y value (y = 0.1 keV/micron 5000 keV/micron) at any projectile energy level (E = 0.01 MeV/u to 50,000 MeV/u) of each specific radiation type (Z = 1 to 28). Because the anomalous response has been observed at large event sizes in the experiment due to the escape of energy out of sensitive volume by delta-rays and the entry of delta-rays from the high-density wall into the low-density gas-volume cavity, Monte Carlo simulation was also made for the response of a walled-TEPC with wall thickness 2 mm and density 1 g/cm(exp 3). The radius of cavity was set to 6.35 mm and a gas density 7.874 x 10(exp -5) g/cm(exp 3). The response of the walled- and the wall-less counters were compared. The average quality factor Q(sub ave)(y) for trapped protons on STS-89 demonstrated the good agreement between the model calculations and flight TEPC data as shown. Using an integrated space radiation model (this includes the transport codes HZETRN and BRYNTRN, the quantum nuclear interaction model QMSFRG) and the resultant response distribution functions of walled-TEPC from Monte-Carlo track simulations, we compared model calculations with walled-TEPC measurements from NASA missions in LEO and made predictions for the lunar and the Mars missions. The Q(sub ave)(y) values for the trapped or the solar protons ranged from 1.9-2.5. This over-estimates the Qave(LET) values which ranged from 1.4-1.6. Both quantities increase with shield thickness due to nuclear fragmentation. The Q(sub ave)(LET) for the complete GCR spectra was found to be 3.5-4.5, while flight TEPCs measured 2.9-3.4 for Q(sub ave)(y). The GCR values are decreasing with the shield thickness. Our analysis for a proper interpretation of data supports the use of TEPCs for monitoring space radiation environment.

Kim, Myung-Hee Y.↗

A Computationally-Efficient, Multi-Mechanism Based Framework for the Comprehensive Modeling of the Evolutionary Behavior of Shape Memory Alloys

The report summarizes the accomplishments made during the 4-year duration of the project. Here, the major emphasis is placed on the different tasks performed by the two research teams; i.e., the modeling activities by the University of Akron (UA) team and the experimental and neutron diffraction studies conducted by the University of Central Florida (UCF) team, during this 4-year period. Further technical details are given in the upcoming sections by UA and UCF for each of the milestones/years (together with the corresponding figures and captions).The project majorly involved the development, validation, and application of a general theoretical model that is capable of capturing the nonlinear hysteretic responses, including pseudoelasticity, shape memory effect, rate-dependency, multi-axiality, asymmetry in tension versus compression response of shape memory alloys. Among the targeted goals for the SMA model was its ability to account for the evolutionary character response (including transient and long term behavior under sustained cycles) for both conventional and high temperature (HT) SMAs, as well as being able to simulate some of the devices which exploit these unique material systems. This required extensive (uniaxial and multi-axial) experiments needed to guide us in calibrating and characterizing the model. Moreover, since the model is formulated on the theoretical notion of internal state variables (ISVs), neutron diffraction experiments were needed to establish the linkage between the micromechanical changes and these ISVs. In addition, the design of the model should allow easy implementation in large scale finite element application to study the behavior of devices making use of these SMA materials under different loading controls. Summary of the activities, progress/achievements made during this period is given below in details for the University of Akron and the University (Section 2.0) of Central Florida (Section 3.0).

Alloys↗

Data analysis and interpretation related to space system/environment interactions at LEO altitude

Several studies made on the interaction of active systems with the LEO space environment experienced from orbital or suborbital platforms are covered. The issue of high voltage space interaction is covered by theoretical modeling studies of the interaction of charged solar cell arrays with the ionospheric plasma. The theoretical studies were complemented by experimental measurements made in a vacuum chamber. The other active system studied was the emission of effluent from a space platform. In one study the emission of plasma into the LEO environment was studied by using initially a 2-D model, and then extending this model to 3-D to correctly take account of plasma motion parallel to the geomagnetic field. The other effluent studies related to the releases of neutral gas from an orbiting platform. One model which was extended and used determined the density, velocity, and energy of both an effluent gas and the ambient upper atmospheric gases over a large volume around the platform. This model was adapted to study both ambient and contaminant distributions around smaller objects in the orbital frame of reference with scale sizes of 1 m. The other effluent studies related to the interaction of the released neutral gas with the ambient ionospheric plasma. An electrostatic model was used to help understand anomalously high plasma densities measured at times in the vicinity of the space shuttle orbiter.

Raitt, W. John↗

Reinforcement learning pulses for transmon qubit entangling gates

The utility of a quantum computer is highly dependent on the ability to reliably perform accurate quantum logic operations. For finding optimal control solutions, it is of particular interest to explore model-free approaches, since their quality is not constrained by the limited accuracy of theoretical models for the quantum processor—in contrast to many established gate implementation strategies. In this work, we utilize a continuous control reinforcement learning algorithm to design entangling two-qubit gates for superconducting qubits; specifically, our agent constructs cross-resonance and CNOT gates without any prior information about the physical system. Using a simulated environment of fixed-frequency fixed-coupling transmon qubits, we demonstrate the capability to generate novel pulse sequences that outperform the standard cross-resonance gates in both fidelity and gate duration, while maintaining a comparable susceptibility to stochastic unitary noise. We further showcase an augmentation in training and input information that allows our agent to adapt its pulse design abilities to drifting hardware characteristics, importantly, with little to no additional optimization. Our results exhibit clearly the advantages of unbiased adaptive-feedback learning-based optimization methods for transmon gate design.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CNO abundances and hydrodynamic models of the Nova outbursts. 4: Comparison with observations

A variety of observations of novae are discussed in light of theoretical models. It is proposed that the nearly constant bolometric luminosity of FH Ser originates in the non-degenerate hydrogen-burning region at the bottom of the hydrogen-rich envelope which remains after the primary ejection. The shift of the wavelength of peak emission from the visual to shortward of the ultraviolet is caused by the decrease of the photospheric radius of the remnant envelope as the bolometric luminosity stays nearly constant. The oscillations in the light curve of GK Per during the transition stage can be explained by a pulsation of the remnant envelope when it is the size of the Roche lobe. The CNO over-abundances in novae reported by various observers are strongly suggestive of this nova mechanism. Finally, the implications of the upper limits of C-13 and N-15 in DQ Her are discussed.

Sparks, W. M.↗

CNO abundances and hydrodynamic models of the nova outburst. IV - Comparison with observations

A variety of observations of novae are discussed in light of theoretical models. It is proposed that the nearly constant bolometric luminosity of FH Ser originates in the nondegenerate hydrogen-burning region at the bottom of the hydrogen-rich envelope which remains after the primary ejection. The shift of the wavelength of peak emission from the visual to shortward of the ultraviolet is caused by the decrease of the photospheric radius of the remnant envelope as the bolometric luminosity stays nearly constant. The oscillations in the light curve of GK Per during the transition stage can be explained by a pulsation of the remnant envelope when it is larger than the semimajor axis of the binary system. The CNO overabundances in novae reported by various observers are strongly suggestive of the proposed nova mechanism. Implications of the upper limits on C-13 and N-15 found in DQ Her are discussed.

Sparks, W. M.↗

Comparison of GSFC and JPL VLBI modeling software: Benchmark

The Very Long Base Interferometry. The VLBI modeling software packages CALC 6.0 (GSFC) and MASTERFIT (JPL) are compared in some detail. Theoretical model delays are calculated for a set of 120 fictitious observations which involve a variety of sources, baselines, and antennas. Discrepancies between the total delays given by the two programs are of the order of 2 cm (RMS). The modeling of antenna offsets appears to account for approximately half of this difference. Relativistic bending contributions to the delay differ by 3 cm (RMS), and the there appears to be some mutual cancellation of errors involving antenna offsets, bending, and the effects of the two different Solar System ephemerides employed by CALC and MASTERFIT. This cancellation has not been completely characterized here.

Sovers, O. J.↗

Modeling and data analysis of the NASA-WSTF frictional heating apparatus - Effects of test parameters on friction coefficient

A theoretical model is being developed jointly by the NASA White Sands Test Facility (WSTF) and the University of California at Santa Barbara (UCSB) to analyze data generated from the WSTF frictional heating test facility. Analyses of the data generated in the first seconds of the frictional heating test are shown to be effective in determining the friction coefficient between the rubbing interfaces. Different friction coefficients for carobn steel and Monel K-500 are observed. The initial condition of the surface is shown to affect only the initial value of the friction coefficient but to have no significant influence on the average steady-state friction coefficient. Rotational speed and the formation of oxide film on the rotating surfaces are shown to have a significant effect on the friction coefficient.

Zhu, Sheng-Hu↗

A model for the trap-assisted tunneling mechanism in diffused n-p and implanted n(+)-p HgCdTe photodiodes

A theoretical model for the trap-assisted tunneling process in diffused n-on-p and implanted n(+)-on-p HgCdTe photodiodes is presented. The model describes the traps and the trap characteristics: concentration, energy level, and capture cross sections. We have observed that the above two types of diodes differ in the voltage dependence of the trap-assisted tunneling current and dynamic resistance. Our model takes this difference into account and offers an explanation of the phenomenon. The good fit between measured and calculated DC characteristics of the photodiodes (for medium and high reverse bias and for temperatures from 65 to 140 K) supports the validity of the model.

Rosenfeld, David↗

The three-dimensional structures of X-ray bright points

Recently, the Convergin Flux Model has been proposed for X-ray bright points and cancelling magnetic features. The aim of this piece of work is to try and model theoretically specific X-ray bright points in the framework of the Converging Flux Model. The observational data used includes a magnetogram showing the normal component of the magnetic field at the photosphere and a high-resolution soft X-ray image from NIXT showing the brightenings in the lower solar corona. By approximating the flux concentrations in the magnetograms with poles of the appropriate sign and sense, the overlying three-dimensional potential field structure is calculated. Deduction of plausible motions of the flux sources are made which produce brightenings of the observed shape due to reconnection between neighbouring flux regions. Also the three-dimensional separatrix and separator structure and the way the magnetic field lines reconnect in three dimensions is deduced.

Parnell, C. E.↗

Neural Network Prediction of Failure of Damaged Composite Pressure Vessels from Strain Field Data Acquired by a Computer Vision Method

This effort used a new and novel method of acquiring strains called Sub-pixel Digital Video Image Correlation (SDVIC) on impact damaged Kevlar/epoxy filament wound pressure vessels during a proof test. To predict the burst pressure, the hoop strain field distribution around the impact location from three vessels was used to train a neural network. The network was then tested on additional pressure vessels. Several variations on the network were tried. The best results were obtained using a single hidden layer. SDVIC is a fill-field non-contact computer vision technique which provides in-plane deformation and strain data over a load differential. This method was used to determine hoop and axial displacements, hoop and axial linear strains, the in-plane shear strains and rotations in the regions surrounding impact sites in filament wound pressure vessels (FWPV) during proof loading by internal pressurization. The relationship between these deformation measurement values and the remaining life of the pressure vessels, however, requires a complex theoretical model or numerical simulation. Both of these techniques are time consuming and complicated. Previous results using neural network methods had been successful in predicting the burst pressure for graphite/epoxy pressure vessels based upon acoustic emission (AE) measurements in similar tests. The neural network associates the character of the AE amplitude distribution, which depends upon the extent of impact damage, with the burst pressure. Similarly, higher amounts of impact damage are theorized to cause a higher amount of strain concentration in the damage effected zone at a given pressure and result in lower burst pressures. This relationship suggests that a neural network might be able to find an empirical relationship between the SDVIC strain field data and the burst pressure, analogous to the AE method, with greater speed and simplicity than theoretical or finite element modeling. The process of testing SDVIC neural network analysis and some encouraging preliminary results are presented in this paper. Details are given concerning the processing of SDVIC output data such that it may be used as back propagation neural network (BPNN) input data. The software written to perform this processing and the BPNN algorithm are also discussed. It will be shown that, with limited training, test results indicate an average error in burst pressure prediction of approximately six percent,

Russell, Samuel S.↗

First Measurement Of Charged-current 1 Muon 2 Proton 0 Pion Single Differential Cross-sections On Argon-40 At 0.8 Gev Average Neutrino Energy With The MicroBooNE Detector

Constraining systematic uncertainties that arise from neutrino-nucleon cross-section modeling is critical for upcoming neutrino oscillation experiments. Neutrino interactions that lead to the ejection of 2 particles from the target nucleus, leaving the nucleus with 2 holes, are one cross-section of interest. These instances, known as 2-particle 2-hole (2p2h) states, can be produced either by neutrino interaction modes or from the influence of nuclear physics on the neutrino interaction. While there are many theoretical models that attempt to describe the nature of 2p2h states, very few experimental measurements of this process exist, making it difficult to benchmark theoretical calculations. Furthermore, no high statistic cross-section measurements of 2p2h states exist on $^{40}$Ar, the target nucleus of many current and next generation neutrino oscillation experiments. This analysis aims to address this issue by providing the first high-statistic single differential cross-section me asurements of 2p2h states. Using data collected from the first 3 years of running of the MicroBooNE experiment, we select $\nu_\mu$ charged-current interaction events that produce a single muon, 2 protons, and no pions in the final state (CC1$\mu$2p0$\pi$). The single differential cross-section is then extracted as a function of a variety of physics variables and compared to theoretical predictions from several event generator model sets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Further tests of the Suits reflectance model

Experimental measurements of the visible light and infrared reflectance of spring wheat are used in examining the validity of the Suits (1972) model for vegetative canopy reflectance. The degree of agreement between the experimental results and the theoretical model suggests a technique for the remote sensing of the leaf area index at 650 nm. However, the Suits model needs to be modified when the sun and observer zenith angles are not small.

Lemaster, E. W.↗

The stellar wind velocity function for red supergiants determined in eclipsing binaries

The potential for direct measurement of the acceleration of stellar winds from the supergiant component of Zeta Aurigae-type binary stars is discussed. The aberration angle of the interaction shock cone centered on the hot star provides a measure of the velocity of the cool star wind at the orbit of the secondary. This is confirmed by direct observations of stellar wind (P Cygni) line profile variations. This velocity is generally smaller than the final (terminal) velocity of the wind, deduced from the P Cygni line profiles. The contrast between these results and previously published supergiant wind models is discussed. The implication on the physics of energy source dissipation predicted in the theoretical models is considered.

Ahmad, Imad A.↗

The measurement, modeling, and prediction of traction for rocket propellant 1

Traction tests were performed on RP-1, a common kerosene based rocket propellant. Traction data on this fluid are required for purposes of turbopump bearing design, using codes such as SHABERTH. To obtain the traction data, an existing twin disc machine was used, operating under the side slip mode and using elliptical contacts. The range of test variables were: contact peak Hertz stress from 1.0 to 2.0 GPa, disc surface speed from 10 to 50 m/s, fluid inlet temperature from 30 to 70 C, and with a contact aspect ratio of 1.7. The resulting traction curves were reduced to fundamental fluid property parameters using the Johnson and Tevaarwerk traction model. Theoretical traction predictions were performed by back substitution of the fundamental properties into the traction model. Comparison of the predicted with the measured curves gives a high degree of confidence in the correctness of the traction model. For purposes of input to the NASA SHABERTH program, the traction model was next used to predict the expected traction of RP-1 under line contact conditions.

Tevaarwerk, J. L.↗

A variational approach to understanding white dwarf evolution

A variational approach is used to map out the effects that uncertainties in the theoretical model parameters have upon the derived ages near the observed cutoff in the white dwarf luminosity function. Two representative sequences are assessed, simulating a white dwarf with a 50/50 C/O mixture in the core and an outer helium layer and a white dwarf with a C/O convective overshooting profile. The differential effects that the variation of selected model input quantities has on the ages are reported, and it is concluded that internal theoretical uncertainties are small and getting smaller with time, and the results underscore the power of using the observed white dwarf luminosity function for studying the history of star formation in the Galaxy.

Wood, M. A.↗