Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sunlight”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Interference of silibinin with IGF-1R signalling pathways protects human epidermoid carcinoma A431 cells from UVB-induced apoptosis

Highlights: ► Silibinin protects A431 cells from UVB irradiation-induced apoptosis. ► Up-regulation of the IGF-1R-JNK/ERK pathways by UVB induces cell apoptosis. ► Silibinin inhibits IGF-1R pathways to repress caspase-8-mediated apoptosis. -- Abstract: Ultraviolet B (UVB) from sunlight is a major cause of cutaneous lesion. Silibinin, a traditional hepatic protectant, elicits protective effects against UVB-induced cellular damage. In A431 cells, the insulin-like growth factor-1 receptor (IGF-1R) was markedly up-regulated by UVB irradiation. The activation of the IGF-1R signalling pathways contributed to apoptosis of the cells rather than rescuing the cells from death. Up-regulated IGF-1R stimulated downstream mitogen-activated protein kinases (MAPKs), such as c-Jun N-terminal kinases (JNK) and extracellular signal-regulated protein kinases 1/2 (ERK1/2). The subsequent activation of caspase-8 and caspase-3 led to apoptosis. The activation of IGF-1R signalling pathways is the cause of A431 cell death. The pharmacological inhibitors and the small interfering RNA (siRNA) targeting IGF-1R suppressed the downstream activation of JNK/ERK-caspases to help the survival of the UVB-irradiated A431 cells. Indeed, silibinin treatment suppressed the IGF-1R-JNK/ERK pathways and thus protected the cells from UVB-induced apoptosis.

60 APPLIED LIFE SCIENCES↗

Nuclear DNA damage-triggered NLRP3 inflammasome activation promotes UVB-induced inflammatory responses in human keratinocytes

Ultraviolet (UV) radiation in sunlight can result in DNA damage and an inflammatory reaction of the skin commonly known as sunburn, which in turn can lead to cutaneous tissue disorders. However, little has been known about how UV-induced DNA damage mediates the release of inflammatory mediators from keratinocytes. Here, we show that UVB radiation intensity-dependently increases NLRP3 gene expression and IL-1β production in human keratinocytes. Knockdown of NLRP3 with siRNA suppresses UVB-induced production of not only IL-1β, but also other inflammatory mediators, including IL-1α, IL-6, TNF-α, and PGE{sub 2}. In addition, inhibition of DNA damage repair by knockdown of XPA, which is a major component of the nucleotide excision repair system, causes accumulation of cyclobutane pyrimidine dimer (CPD) and activation of NLRP3 inflammasome. In vivo immunofluorescence analysis confirmed that NLRP3 expression is also elevated in UV-irradiated human epidermis. Overall, our findings indicate that UVB-induced DNA damage initiates NLRP3 inflammasome activation, leading to release of various inflammatory mediators from human keratinocytes. - Highlights: • UVB radiation induces NLRP3 inflammasome activation in human keratinocytes. • NLRP3 knockdown suppresses production of UVB-induced inflammatory mediators. • UVB-induced DNA damage triggers NLRP3 inflammasome activation. • NLRP3 expression in human epidermis is elevated in response to UV radiation.

60 APPLIED LIFE SCIENCES↗

De-pollution efficacy of photocatalytic roofing granules

Photocatalytic building surfaces can harness sunlight to reduce urban air pollution. The NO x abatement capacity of TiO 2 -coated granules used in roofing products was evaluated for commercial product development. A laboratory test chamber and ancillary setup were built following conditions prescribed by ISO Standard 22197-1. It was validated by exposing reference P25-coated aluminum plates to a 3 L min -1 air flow enriched in 1 ppm NO under UVA irradiation (360 nm, 11.5 W m -2 ). We characterized prototype granule-surfaced asphalt shingles and loose granules prepared with different TiO 2 loadings and post-treatment formulations. Tests performed at surface temperatures of 25 and 60 °C showed that NO x abatement was more effective at the higher temperature. Preliminary tests explored the use of 1 ppm NO 2 and of 1 ppm and 0.3 ppm NO/NO 2 mixtures. Specimens were aged in a laboratory accelerated weathering apparatus, and by exposure to the outdoor environment over periods that included dry and rainy seasons. Laboratory aging led to higher NO removal and NO 2 formation rates, and the same catalyst activation was observed after field exposure with frequent precipitation. However, exposure during the dry season reduced the performance. This inactivation was mitigated by cleaning the surface of field-exposed specimens. Doubling the TiO 2 loading led to a 50–150% increase in NO removal and NO x deposition rates. Finally, application of different post-treatment coatings decreased NO removal rates (21–35%) and NO x deposition rates (26–74%) with respect to untreated granules. The mass balance of nitrogenated species was assessed by extracting granules after UV exposure in a 1 ppm NO-enriched atmosphere.

54 ENVIRONMENTAL SCIENCES↗

Fe 2 O 3 –TiO 2 core–shell nanorod arrays for visible light photocatalytic applications

By using the glancing angle deposition technique and post-deposition annealing, Fe 2 O 3 –TiO 2 core-shell nanorod arrays with specific crystalline states can be designed and fabricated. The Fe 2 O 3 –TiO 2 core-shell samples annealed at temperatures greater than 450°C formed α-Fe 2 O 3 and anatase TiO 2 , and showed higher catalytic efficiency for the degradation of methylene blue (MB) under visible light illumination when compared with pure anatase TiO 2 or α-Fe 2 O 3 nanorod arrays. Solar conversion of carbon dioxide and water vapor in the presence of Fe 2 O 3 –TiO 2 core-shell nanorod arrays was also investigated. Carbon monoxide, hydrogen, methane, and methanol along with other hydrocarbons were produced after only several hours’ exposure under ambient sunlight. It was determined that the core-shell structure showed greater efficiency for solar CO 2 conversion than the pure TiO 2 nanorod arrays.

Glancing angle deposition↗

Phenylene-linked tetrapyrrole arrays containing free base and diverse metal chelate forms – Versatile synthetic architectures for catalysis and artificial photosynthesis

Tetrapyrrole macrocycles are central to photosynthesis yet a single macrocycle does not carry out photosynthesis; rather, assemblies of tetrapyrrole macrocycles work in concert in antenna complexes, reaction centers, and electron-transport chains to harvest sunlight, funnel excited-state energy and separate charge for biological use. A longstanding theme in artificial photosynthesis has been to construct covalently linked “arrays” of metalated and free base tetrapyrrole macrocycles for fundamental studies of such processes, which entail excited-state and ground-state interactions. Among linkers in arrays chemistry, the 1,2-, 1,3-, or 1,4-disubstituted phenylene unit has proved very attractive owing to the resulting short distance, defined architecture, and appropriate extent of electronic coupling of adjacent macrocycles to give rapid electron and/or energy transfer while largely retaining desired spectral features. Eight distinct strategies to construct phenylene-linked tetrapyrrole arrays are identified in a review with comprehensive coverage since inception in the early 1970s through mid-year 2021. The arrays predominantly incorporate porphyrins with very few chlorins and bacteriochlorins, reflecting historic availability of synthetic methods for macrocycle formation. Of the eight strategies, only two appear applicable to (bacterio)chlorins. While studies in artificial photosynthesis have largely fueled this field, applications in catalysis have also been examined. Altogether >400 arrays are covered. The review delves into synthesis and molecular design, sketches photophysical properties, and suggests unrealized opportunities in arrays chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Feeding from the sun—Successes and prospects in bioengineering photosynthesis for food security

There is an urgent need for increased crop productivity to reduce food insecurity and improve sustainability. Photosynthesis converts sunlight energy into carbohydrates, providing the source of nearly all of humanity’s food. Photosynthesis is a key target for improvement, owing to inherent inefficiencies in the biochemical process. Over the last decade of advancements in bioengineering, strategies to increase the efficiency of photosynthesis were tested with proven enhancements to crop yields in field trials. Simple strategies like increasing the content of photosynthetic proteins have reliably increased photosynthesis and productivity in crops, as have more complex strategies such as bypassing photorespiration. While insertion of carbon-concentrating mechanisms into C3 plants remains an engineering challenge, modeling suggests that achieving that would have the greatest gain for crop improvement. This review discusses the many successes in improving photosynthesis achieved over the past decade and quantifies the potential for future engineering targets to increase crop productivity.

Long, Stephen P. [University of Illinois, Urbana, ↗

An attached microalgae platform for recycling phosphorus through biologically mediated fertilizer formation and biomass cultivation

Nutrient management is a global challenge for protecting water bodies from eutrophication and for retaining and sustainably recycling phosphorus within the biosphere. This challenge is especially important for water resource recovery facilities (WRRFs) in jurisdictions that limit nutrient loads in plant effluent. A microalgae-based biofilm platform has been designed, constructed, and tested to remove phosphorus and nitrogen from anaerobic digester (AD) effluent filtrate through cultivating biomass and inducing the precipitation of a mineral called struvite (NH₄MgPO₄ · 6H₂O) using a rotating algae biofilm reactor (RABR). RABRs function by rotating a growth substratum through nutrient rich water and then into the atmosphere, immersing microalgae in both sunlight and water. Photosynthesis is utilized in RABR operation to enhance struvite formation by increasing the pH value within the biofilm through the uptake of carbon dioxide from solution. Measurements of pH trended higher with depth through the biofilm when exposed to light confirming the function of photosynthesis in increasing pH and, as a consequence, struvite formation. In addition, reducing RPM allows more time for water to evaporate through exposure of the biofilm to the atmosphere and provides a management option to exceed struvite solubility product. Struvite precipitation was predicted based on chemical analysis and MINTEQ modeling of ADE, was confirmed using Scanning Electron Microscopy and Energy Dispersive X-ray Spectroscopy, and quantified by determining ash content. Increase in pH within the biofilm was confirmed as photosynthetic photon flux density increased. While struvite precipitation and removal from wastewater is conventionally accomplished through physicochemical methods, this research is the first report of struvite enhanced formation through algae biofilm-based photosynthesis processes.

09 BIOMASS FUELS↗

Metabolic model guided strain design of cyanobacteria

Cyanobacteria are oxygenic photoautotrophs that serve as potential platforms for the production of biochemicals from cheap and renewable raw materials – sunlight, water, and carbon dioxide. Systems level analysis of the metabolic network of these organisms could enable the successful engineering of these organisms for the enhanced production of target chemicals. Metabolic modeling techniques including both stoichiometric and kinetic modeling with a genome-wide coverage enable a global assessment of metabolic capabilities. Recent studies guided by such modeling techniques have engineered strains for the enhanced production of valuable chemicals such as ethanol, n-butanol, 1,3-propanediol, glycerol, limonene, and isoprene from CO 2 .

59 BASIC BIOLOGICAL SCIENCES↗

Demand for off-grid desalination technology in small-island communities — Can interfacial solar vapor generation be the answer?

The demand for an off-grid desalination technology and the feasibility of using interfacial solar vapor generation (ISVG) to address the problem were evaluated within the context of Bungin Island. Bungin Island is a small-island community in Indonesia facing water scarcity. By conducting interviews with households there, we found that households located on the exterior portion of the island faced the greatest challenges to water access. For example, only 17% of exterior households had piped water access, whereas 67% central households had piped water access. Similar inequities for exterior households were also found with respect to the cost of getting additional water. Thus, we determined that an off-grid desalination technology is best suited for solving the water access problems for the most vulnerable communities in small islands. Further, ISVG technologies that draw on the radiative energy in sunlight to achieve desalination are promising in increasing water access by offering a floating off-grid devices on water near exterior households, passive operation, low capital investment, and simple maintenance. These findings stress the importance of understanding how contextual factors shape barriers to water access and provide a road map on how to begin incorporating these factors into the development of a more sustainable desalination technology.

42 ENGINEERING↗

Angular selective window systems: Assessment of technical potential for energy savings

Static angular selective shading systems block direct sunlight and admit daylight within a specific range of incident solar angles. The objective of this study is to quantify their potential to reduce energy use and peak demand in commercial buildings using state-of-the art whole-building computer simulation software that allows accurate modeling of the behavior of optically-complex fenestration systems such as angular selective systems. Three commercial systems were evaluated: a micro-perforated screen, a tubular shading structure, and an expanded metal mesh. This evaluation was performed through computer simulation for multiple climates (Chicago, Illinois and Houston, Texas), window-to-wall ratios (0.15-0.60), building codes (ASHRAE 90.1-2004 and 2010) and lighting control configurations (with and without). The modeling of the optical complexity of the systems took advantage of the development of state-of-the-art versions of the EnergyPlus, Radiance and Window simulation tools. Results show significant reductions in perimeter zone energy use; the best system reached 28% and 47% savings, respectively without and with daylighting controls (ASHRAE 90.1-2004, south facade, Chicago,WWR=0.45). As a result, angular selectivity and thermal conductance of the angle-selective layer, as well as spectral selectivity of low-emissivity coatings, were identified as factors with significant impact on performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Potential benefits of cool walls on residential and commercial buildings across California and the United States: Conserving energy, saving money, and reducing emission of greenhouse gases and air pollutants

Solar-reflective “cool” walls reduce absorption of sunlight by the building envelope, which may decrease cooling load in warm weather and increase heating load in cool weather. Changes to annual heating, ventilation, and air conditioning (HVAC) energy use depend on climate, wall construction, wall orientation, building geometry, HVAC efficiency, and operating schedule. Changes to annual energy cost and energy-related emissions further vary with local energy prices and emission factors. In this work, we used EnergyPlus to perform over 100,000 whole-building energy simulations, spanning 10 different building categories, three building vintages, 16 California climate zones, and 15 United States (U.S.) climate zones. We find that cool walls yielded annual source energy, energy cost, and emission savings in all California climate zones and in warm U.S. (ASHRAE) climate zones. In California, annual whole-building HVAC energy cost savings were 4.0–27% in single-family homes, 0.5–3.8% in medium office buildings, and 0.0–8.5% in stand-alone retail stores. In warm U.S. climates—zones 1A (Miami, FL) through 4B (Albuquerque, NM)—annual HVAC energy cost savings were 1.8–8.3% in single-family homes, 0.3–4.6% in medium office buildings, and 0.5–11% in stand-alone retail stores. California and U.S. fractional source energy and emission savings were comparable to fractional energy cost savings. Per unit surface area modified, cool-wall savings often exceeded cool-roof savings because building codes typically prescribe much less wall insulation than roof insulation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Roof-integrated radiative air-cooling system to achieve cooler attic for building energy saving

The building attic usually subjects to substantial solar heat gain and has much higher temperature compared to the conditioned living space during the day, especially in summer and in hot areas. Reducing attic temperature can reduce cooling energy consumption in buildings. However, conventional techniques such as cool roof or attic ventilation, suffer from either heating penalty in winter or limited attic temperature reduction. In this work, a new roof-integrated radiative air-cooling system is introduced, which couples radiative sky cooling with attic ventilation to reduce attic temperature. A radiative air cooler with 1.08 m 2 surface area is constructed using a recently developed daytime radiative sky cooling metamaterial [Zhai et al., Science 355, pp. 1062–1066, 2017]. Experimental tests show that sub-ambient air cooling is achieved throughout 24-h day-and-night cycle in a summer day with clear sky conditions. Depending on air flow rates, measured sub-ambient temperature reductions of air are 5–8°C at night and 3–5°C at noon under direct sunlight, respectively. An in-house model is first developed for the radiative air-cooling system, the model is then coupled with EnergyPlus to study annual energy saving of buildings. The performance of the radiative air-cooling system is compared with three reference systems: shingle roof, attic ventilation, and cool roof. Results show that for a single-family house, attic temperature can be substantially reduced by 15.5–21.0°C, varying with attic insulation level, compared to shingle roof on typical summer days. Compared to a shingle roof (solar reflectance 0.25, thermal emittance 0.9) residential building with attic insulations of R-30 (RSI-5.28), R-10 (RSI-1.76), and R-0.8 (RSI-0.14), the roof-integrated radiative air-cooling system can achieve annual cooling energy savings of 0.4–1.5 kWh/m 2 (4.6–18.8%), 1.2–3.6 kWh/m 2 (10.2–41.4%), and 3.7–11.8 kWh/m 2 (26.5–76.1%) respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Unprotected daily sun exposure is differently associated with central adiposity and beta-cell dysfunction by gender: The Korean national health and nutrition examination survey (KNHANES) V

Background: Ultraviolet irradiation by sun exposure has been associated with both harms and benefits to metabolic health. Objective: The objective of this study was to determine whether unprotected daily sun exposure is associated with the prevalence of diabetes and explore the underlying mechanism. Methods: We analyzed the Korean National Health and Nutrition Survey V from 2010 to 2011. Participants 19–60 years of age were asked about the average amount of time they had been exposed to direct sunlight per day since the age of 19. We categorized participants into three groups with different levels of lifetime daily sun exposure and explored the association of sun exposure with the prevalence of diabetes. Results: The risk of diabetes was higher in subjects with more than 5 h of unprotected sun exposure per day, with an odds ratio of 2.39 (95% CI 1.75–3.25), compared to those with less than 2 h of sun exposure, and the association remained significant after adjusting for diabetes risk factors. Long-term sun exposure was associated with increased central obesity and the possibility of an increase in visceral adiposity, especially among women, and with decrease in beta cell function and peripheral adiposity or percent body fat in men. Conclusions: Our study provides a cutoff for upper limit of sun exposure and suggests unprotected daily sun exposure for more than 5 h should be avoided to prevent diabetes. Increased central adiposity and decreased beta cell function were observed in women and men, respectively, who had long-term unprotected daily sun exposure. - Highlights: • Sun exposure for more than 5 h per day is associated with diabetes risk. • Insulin resistance associated with visceral adiposity may play a role in women. • Insulin secretory defect may explain diabetes risk in men.

54 ENVIRONMENTAL SCIENCES↗

It's not just the food you eat: Environmental factors in the development of food allergies

The dramatic rise in the prevalence of food allergy and food allergy-associated anaphylaxis in the past few decades has fueled investigative interest into understanding this puzzling trend. Here, we review the question as to whether important external environmental determinants beyond dietary habits and exposure to food allergens are involved. This review will summarize our current understanding of these environment determinants, derived from the latest experimental and epidemiological research. Specifically, we will review the role of exposures that affect skin barrier function, development of a diverse microbiome, and food processing. Additional exposures of concern are insufficient sunlight, endocrine disrupting chemicals and pesticides, and use of specific pharmaceutical agents that may drive or modify the risk for food allergy. Despite limitations in the quantity and quality of research to date, many new epidemiological associations and experimental data in support of this paradigm have emerged.

54 ENVIRONMENTAL SCIENCES↗

Numerical evaluation of photosensitive tracers as a strategy for separating surface and subsurface transient storage in streams

For this work, we numerically evaluated photosensitive tracers as a potential strategy for separating the effects of surface and hyporheic storage zones (SSZs and HSZs, respectively) on stream corridor transport. Correctly separating HSZ and SSZ effects is critical to estimating the hydro-biogeochemical function of a stream because HSZs and SSZs expose solutes to significantly different biogeochemical conditions, like sunlight exposure, microbial processes, and oxygen availability. Our numerical experiments used a multiscale river-corridor transport model implemented in the ATS code, which accommodates multiple storage zones with distinct travel time distributions and biogeochemical reactions. For parameter inferences, we used Bayesian inverse modeling. We found that breakthrough curves for photo-decaying tracers from day and night injection can delineate surface and hyporheic transient storage contributions, but only when interpreted jointly through a two-storage zone model. Numerical experiments that used only daytime injection or interpreted breakthrough curves with a single storage zone model yielded good fit to breakthrough curves, but parameter estimates were biased and controlling processes misattributed, examples of good model fits for the wrong reasons. Using those biased parameter estimates in reactive transport simulations resulted in significantly different projections of denitrification, which underscores the potential for stream function to be mischaracterized if tracer tests are interpreted through an inappropriately simplified model for transient storage. More generally, this study highlights the role of modeling in evaluating the experimental design and identifying the potential of system mischaracterization and its implications.

54 ENVIRONMENTAL SCIENCES↗

Enhanced performance of dye-sensitized solar cells based on TiO{sub 2} with NIR-absorption and visible upconversion luminescence

TiO{sub 2} with NIR-absorption and visible upconversion luminescence (UC-TiO{sub 2}) is prepared by a sol-gel method and calcined at 700 Degree-Sign C for 6 h. The material broadens the response region of dye sensitized solar cells (DSSCs) from an ultraviolet-visible region to the whole region of the solar spectrum. It shifts NIR sunlight to visible light which matches the strong absorbing region of the dye (N719). DSSCs based on UC-TiO{sub 2} achieved higher conversion efficiency than that on raw TiO{sub 2}. UC-TiO{sub 2} was mixed with commercial raw TiO{sub 2} as additive, and the short-circuit current density, open-circuit voltage and conversion efficiency of the DSSC reached to the optimum values 13.38 mA/cm{sup 2}, 0.78 V and 6.63% (AM1.5 global), comparing with the blank values: 7.99 mA/cm{sup 2}, 0.75 V and 4.07%, respectively. Also the mechanisms of upconversion by multiphoton absorption and energy transfer processes are interpreted in this paper. - Graphical abstract: By introducing TiO{sub 2} with NIR-absorption and visible up-conversion luminescence into DSSC, a signal reflection was explored from ultra-violet region to visible region, and to near-IR region. Highlights: Black-Right-Pointing-Pointer TiO{sub 2} with NIR-absorption and visible up-conversion luminescence (UC-TiO{sub 2}) was prepared by a sol-gel method. Black-Right-Pointing-Pointer A systematic characterization and analysis was carried out to discuss the mechanism. Black-Right-Pointing-Pointer A significantly enhanced performance of DSSC was explored by using UC-TiO{sub 2} as an additive.

36 MATERIALS SCIENCE↗

Graphitic carbon nitride/Cu{sub 2}O heterojunctions: Preparation, characterization, and enhanced photocatalytic activity under visible light

As a metal-free semiconductor material, graphitic carbon nitride (C{sub 3}N{sub 4}), the high recombination rate of photogenerated charges and insufficient sunlight absorption limit its solar-based photocatalytic activity. Here, we reported the heterojunctions of C{sub 3}N{sub 4}–Cu{sub 2}O with a p–n junction structure, which was synthesized by a hydrothermal method. The HR-TEM result revealed an intimate interface between C{sub 3}N{sub 4} and Cu{sub 2}O in the heterojunction, and UV–vis diffuse reflection spectra showed their extended spectral response in the visible region compared with pure C{sub 3}N{sub 4}. These excellent structural and spectral properties, as well as p–n junction structures, endowed the C{sub 3}N{sub 4}–Cu{sub 2}O heterojunctions with enhanced photocatalytic activities. The possible photocatalytic mechanism that photogenerated holes as the mainly oxidant species in photocatalysis was proposed base on the trapping experiments. - Highlights: • A hydrothermal method was used to prepare C3N{sub 4}–Cu{sub 2}O heterojunction. • The resulting heterojunction possesses broader absorption in the visible region. • The material owns a high visible light activity and stability for dye degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Preparation of highly photocatalytic active CdS/TiO{sub 2} nanocomposites by combining chemical bath deposition and microwave-assisted hydrothermal synthesis

CdS/TiO{sub 2} nanocomposites were prepared from Cd and Ti (1:1 M ratio) using cetyltrimethylammonium bromide by a two-step chemical bath deposition (CBD) and microwave-assisted hydrothermal synthesis (MAHS) method. A series of nanocomposites with different morphologies and activities were prepared by varying the reaction time in the MAHS (2, 4, and 6 h). The crystal structure, morphology, and surface physicochemical properties of the nanocomposites were characterized by X-ray diffraction, UV–visible diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, and N{sub 2} adsorption–desorption measurements. The results show that the CdS/TiO{sub 2} nanocomposites were composed of anatase TiO{sub 2} and hexagonal CdS phases with strong absorption in the visible region. The surface morphologies changed slightly with increasing microwave irradiation time, while the Brunauer–Emmett–Teller surface area increased remarkably. The photocatalytic degradation of methyl orange (MO) was investigated under UV light and simulated sunlight irradiation. The photocatalytic activity of the CdS/TiO{sub 2} (6 h) composites prepared by the MAHS method was higher than those of CdS, P25, and other CdS/TiO{sub 2} nanocomposites. The CdS/TiO{sub 2} (6 h) nanocomposites significantly affected the UV and microwave-assisted photocatalytic degradation of different dyes. To elucidate the photocatalytic reaction mechanism for the CdS/TiO{sub 2} nanocomposites, controlled experiments were performed by adding different radical scavengers. - Graphical abstract: CdS/TiO{sub 2} nanocomposites were prepared using CTAB by CBD combined with MAHS method. In addition, with increasing microwave irradiation time, the morphology of CdS/TiO{sub 2} changed from popcorn-like to wedge-like structure. - Highlights: • The CdS/TiO{sub 2} was prepared by CBD combined with MAHS two-step method under CTAB. • The morphologies of as-samples were different with the time of microwave increased. • Compared with TiO{sub 2}, as-samples show strong absorbance in the visible light region. • The CdS/TiO{sub 2} (6 h) exhibits remarkably effects on photodegradation under multi-mode. • A possible growth process of CdS/TiO{sub 2} nanocomposite was illustrated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗