Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Quenching of Single-Particle Strength in A=15 Nuclei

Here, absolute cross sections for the addition of s- and d-wave neutrons to 14 C and 14 N have been determined simultaneously via the (d,p) reaction at 10 MeV/u. The difference between the neutron and proton separation energies, ΔS, is around -20 MeV for the 14 C+n system and +8 MeV for 14 N+n. The population of the 1s 1/2 and 0d 5/2 orbitals for both systems is reduced by a factor of approximately 0.5 compared with the independent single-particle model, or about 0.6 when compared with the shell model. This finding strongly contrasts with results deduced from intermediate-energy knockout reactions between similar nuclei on targets of 9 Be and 12 C. The simultaneous technique used removes many systematic uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Puzzling 𝐵⁡(𝐸⁢2;0 + → 2 + ) strength in the proton dripline nucleus 36 Ca

Recent measurements of the 𝐸⁢2 transition rate from the ground state to the first 2 + excited state of the proton dripline nucleus 36 Ca show an unusual pattern when compared to its isotopic neighbor 38 Ca: despite having a higher 𝐸 𝑥 ⁡(2$^{+}_{1}$) excitation energy, the 𝐵⁡(𝐸⁢2;0$^{+}_{1}$ → 2$^{+}_{1}$) rate in 36 Ca is larger. The question that naturally arises is to what extent this observation can be attributed to the unbound character of the 2$^{+}_{1}$ state. To understand the influence of the continuum space on the low-energy properties of 36 Ca, we carried out Gamow shell model calculations that can account for the continuum coupling effects associated with the occupation of unbound 𝑓⁡𝑝 shells. We found that in the threshold 2 + state, 36 Ca is spatially diffused, which impacts the observed 𝐵⁡(𝐸⁢2) trend.

20 ≤ A ≤ 38↗
DOE OSTI2021

Assessment of MQXF Quench Heater Insulation Strength and Test of Modified Design

The HL-LHC interaction region magnet triplets (Q1,Q2, and Q3) will be composed of superconducting Nb 3 Sn quadrupoles. The MQXF quadrupole protection system is based on CLIQ (Coupling-Loss Induced Quench system) and outer layer quench heaters. Furthermore, this paper reports a summary of quench heaters to coil high voltage tests performed on MQXF short and long coils in air after fabrication, and in air and He gas after magnet training. Breakdown voltage values demonstrate good margin with respect to the Electrical design criteria for the HL-LHC inner triplet mag-nets. A modification in the quench heater installation-with an extra layer of fiber glass between the coil and the quench heater trace-has been proposed and tested in a mirror magnet to further increase electrical margins. Results demonstrated improvements of high voltage margin at the expense of a clear increase of hot spot temperature.The baseline heater to coil insulation was assessed to be able to guarantee safe operation for the Nb 3 Sn quadrupole magnets for the interaction regions of HL-LHC.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Effect of the Electric Field Strength on the Energy Resolution of Cr/CdTe/Pt Detectors

The electrical and spectrometric characteristics of the Cr/cadmium telluride (CdTe)/Pt structure with a metal-semiconductor type rectifying contact, used in X/γ-ray detectors, are investigated. For the detectors fabrication, chlorine-doped CdTe crystals with a resistivity of (3-6) × 10 9 Ω cm at 293 K were used. 137Cs spectra and their modification by applied voltage change were obtained. The reverse bias voltage corresponding to the best energy resolution of the Cr/CdTe/Pt structure is experimentally determined. The concentration of impurities N in the crystal, which determines the thickness of the space-charge region, is estimated. Finally, an energy resolution deterioration of the Cr/CdTe/Pt structure with increasing voltage is explained due to the Gunn effect.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Bayesian optimized collection strategies for fatigue strength testing

Abstract A statistical framework is presented enabling optimal sampling and analysis of constant life fatigue data. Protocols using Bayesian maximum entropy sampling are built based on conventional staircase and stress step methods, reducing the requirement of prior knowledge for data collection. The Bayesian Staircase method shows improved parameter estimation efficiency, and the Bayesian Stress Step method shows equal accuracy to the standard method at larger step size allowing experimentalists to lessen concerns of loading history. Statistical methods for determining model suitability are shown, highlighting the influence of protocol. Experimental validation is performed, showing the applicability of the methods in laboratory testing.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Microstructural origin of high‐strength Tyranno SA4 SiC fiber studied by comparative Raman spectroscopy #

Tyranno SA4 grade SiC fiber is an emerging continuous fiber with excellent mechanical properties. The origin of the fiber's high-performance was studied by comparative Raman spectroscopy of four different grades of SiC fibers and reference SiC monolith. Analysis of the Raman spectra of fiber cross-sections, surface and homogeneity, and fibers under stress, revealed how differences in microstructure, such as crystalline order, size, and the presence of critical flaws, dictate mechanical properties. In conclusion, this information can help optimize SiC fiber manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Strengths of plasmon satellites in XPS: Real-time cumulant approach

Plasmon satellites observed in x-ray photoemission spectra (XPS) reflect many-body effects beyond the single-electron approximation. However, theoretical calculations are challenging and simplified theories based on electron gas models are not always satisfactory. Here, a cumulant Green’s function approach with a real-time time-dependent density functional theory calculation of the cumulant is described for calculations of these effects, without the need for adjustable parameters. Here, the approach yields good agreement with experimental XPS results, as illustrated for Ge and Al. Corrections due to extrinsic losses and interference are also briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Compressive strength of the plastic-bonded explosive surrogate idoxuridine under quasistatic and dynamic compression

Inert simulant materials, or “mocks”, are often used as surrogates for plastic-bonded explosives (PBX) in non-detonative tests in order to mitigate hazards. Mocks should reproduce as many non-detonative properties of the explosive as possible, including structural behavior in a variety of thermal and mechanical environments. Recently, the molecular crystal idoxuridine (IDOX) has been identified as an ideal mock for the main component in the explosive polymer-matrix composite PBX 9501, and has performed favorably under quasistatic loading conditions. Here, in order to assess robustness over a range of mechanical environments, plastic-bonded IDOX was compression tested from 0.001/s to 2000/s strain rates and compared to PBX 9501 historical data. Plastic-bonded IDOX showed good agreement to PBX 9501 across these strain rates, justifying continued development and production as a mock.

Burch, Alexandra C.↗