Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Intensity Modulated Radiation Therapy for Early-Stage Primary Gastric Diffuse Large B-Cell Lymphoma: Dosimetric Analysis, Clinical Outcome, and Quality of Life

Purpose: To evaluate the dosimetric superiority, efficacy, toxicity, and quality of life (QOL) data of intensity modulated radiation therapy (IMRT) in patients with primary gastric diffuse large B-cell lymphoma (PG-DLBCL). Methods and Materials: Forty-six consecutive patients with early-stage PG-DLBCL underwent IMRT after chemotherapy. The majority of patients (61.5%) were subclassified as the non-germinal center B cell–like subtype. Dosimetric parameters of the planning target volume (PTV) and organs at risk were assessed. Survival rates were depicted with the Kaplan-Meier method and compared with the log-rank test. Quality of life was evaluated using the QLQ-C30-STO22 questionnaires at the last follow-up contact. Results: The median PTV mean dose was 41.6 Gy. Only 0.73% of the PTV received <95% of the prescribed dose, indicating excellent target coverage. The median kidney V20 and liver V30 were 14.1% and 16.1%, respectively. The 5-year overall survival (OS), progression-free survival, and locoregional control rates for all patients were 80.4%, 75.0%, and 93.2%, respectively. Stage, lactate dehydrogenase level, and immunophenotype were significant prognostic factors for OS, and only stage was a significant factor for locoregional control. Consolidation IMRT in patients with complete response after chemotherapy resulted in significantly better OS and progression-free survival than salvage IMRT in patients with non-complete response. Two of 8 patients who had chronic liver disease experienced grade 4 or grade 5 acute hepatic failure after 4 to 5 cycles of rituximab-based chemotherapy and IMRT (40 Gy). No other serious acute or late toxicity was observed. The long-term global and functional QOL scales were excellent, with negligible symptom scales. Conclusions: Intensity modulated radiation therapy yielded excellent target coverage and critical tissue sparing and achieved favorable outcomes with acceptable toxicity and good long-term QOL in early-stage PG-DLBCL.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dosimetric and Clinical Outcomes With Intensity Modulated Radiation Therapy After Chemotherapy for Patients With Early-Stage Diffuse Large B-cell Lymphoma of Waldeyer Ring

Purpose: To assess the dosimetric benefit, prognosis, and toxicity of intensity modulated radiation therapy (IMRT) for early-stage, diffuse large B-cell lymphoma of Waldeyer ring (WR-DLBCL). Methods and Materials: Sixty-one patients with early-stage WR-DLBCL who received chemotherapy followed by IMRT were retrospectively reviewed. Dosimetric parameters for the target volume and critical normal structures were evaluated, and survival was calculated. Linear regression analysis was used to assess the effect of the mean dose (D{sub mean}) to the parotid glands on xerostomia. Results: The median conformity index and homogeneity index of the planning target volume (PTV) were 0.83 and 0.90, respectively, demonstrating very good coverage of the target volume. The mean dose to the parotid glands was 24.9 Gy. The 5-year overall survival (OS), progression-free survival (PFS), and locoregional control (LRC) were 94.7%, 93.1%, and 98.3%, respectively. Early and late toxicities were mild, and no patient experienced late grade ≥3 toxicities. The D{sub mean} to the parotid glands had a linear correlation with late grade ≥2 xerostomia. Conclusions: IMRT after chemotherapy can provide excellent dose conformity and achieve favorable survival and LRC with mild toxicities in patients with early-stage WR-DLBCL. Dose constraints for the parotid glands should be limited to <24 Gy for early-stage WR-DLBCL.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Histologic Subtype in Core Lung Biopsies of Early-Stage Lung Adenocarcinoma is a Prognostic Factor for Treatment Response and Failure Patterns After Stereotactic Body Radiation Therapy

Purpose: Stereotactic body radiation therapy (SBRT) has emerged as an effective treatment for early-stage lung cancer. The histologic subtype of surgically resected lung adenocarcinoma is recognized as a prognostic factor, with the presence of solid or micropapillary patterns predicting poor outcomes. We describe the outcomes after SBRT for early-stage lung adenocarcinoma stratified by histologic subtype. Methods and Materials: We identified 119 consecutive patients (124 lesions) with stage I to IIA lung adenocarcinoma who had undergone definitive SBRT at our institution from August 2008 to August 2015 and had undergone core biopsy. Histologic subtyping was performed according to the 2015 World Health Organization classification. Of the 124 tumors, 37 (30%) were a high-risk subtype, defined as containing a component of solid and/or micropapillary pattern. The cumulative incidences of local, nodal, regional, and distant failure were compared between the high-risk and non–high-risk adenocarcinoma subtypes using Gray's test, and multivariable-adjusted hazard ratios (HRs) were estimated from propensity score–weighted Cox regression models. Results: The median follow-up for the entire cohort was 17 months and for surviving patients was 21 months. The 1-year cumulative incidence of and adjusted HR for local, nodal, regional, and distant failure in high-risk versus non–high-risk lesions was 7.3% versus 2.7% (HR 16.8; 95% confidence interval [CI] 3.5-81.4), 14.8% versus 2.6% (HR 3.8; 95% CI 0.95-15.0), 4.0% versus 1.2% (HR 20.9; 95% CI 2.3-192.3), and 22.7% versus 3.6% (HR 6.9; 95% CI 2.2-21.1), respectively. No significant difference was seen with regard to overall survival. Conclusions: The outcomes after SBRT for early-stage adenocarcinoma of the lung correlate highly with histologic subtype, with micropapillary and solid tumors portending significantly higher rates of locoregional and metastatic progression. In this context, the histologic subtype determined from core biopsies is a prognostic factor and could have important implications for patient selection, adjuvant treatment, biopsy methods, and clinical trial design.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Brachytherapy Improves Survival in Stage III Endometrial Cancer With Cervical Involvement

Purpose: To evaluate the survival benefit of adding vaginal brachytherapy (BT) to pelvic external beam radiation therapy (EBRT) in women with stage III endometrial cancer. Methods and Materials: The National Cancer Data Base was used to identify patients with stage III endometrial cancer from 2004 to 2013. Only women who received adjuvant EBRT were analyzed. Women were grouped according to receipt of BT. Logistic regression modeling was used to identify predictors of receiving BT. Log–rank statistics were used to compare survival outcomes. Cox proportional hazards modeling was used to evaluate the effect of BT on survival. A propensity score–matched analysis was also conducted among women with cervical involvement. Results: We evaluated 12,988 patients with stage III endometrial carcinoma, 39% of whom received EBRT plus BT. Women who received BT were more likely to have endocervical or cervical stromal involvement (odds ratios 2.03 and 1.77; P<.01, respectively). For patients receiving EBRT alone, the 5-year survival was 66% versus 69% with the addition of BT at 5 years (P<.01). Brachytherapy remained significantly predictive of decreased risk of death (hazard ratio 0.86; P<.01) on multivariate Cox regression. The addition of BT to EBRT did not affect survival among women without cervical involvement (P=.84). For women with endocervical or cervical stromal invasion, the addition of BT significantly improved survival (log–rank P<.01). Receipt of EBRT plus BT was associated with improved survival in women with positive and negative surgical margins, and receiving chemotherapy did not alter the benefit of BT. Propensity score–matched analysis results confirmed the benefit of BT among women with cervical involvement (hazard ratio 0.80; P=.01). Conclusions: In this population of women with stage III endometrial cancer the addition of BT to EBRT was associated with an improvement in survival for women with endocervical or cervical stromal invasion.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Investigation of defect formation at the early stage of PVT-grown 4H-SiC crystals

Here, several 4° off-axis 4H-SiC wafers with several hundred microns of initial-stage growth by PVT method are investigated by Synchrotron Monochromatic Beam X-ray Topography (SMBXT). Defect behavior across the seed/newly grown layer interface are demonstrated. Comparison of early stage grown layers to seed sample indicates generation of threading edge dislocation (TED) and threading screw dislocation (TSD)/ threading mixed dislocation (TMD) pairs at the interface while most basal plane dislocations (BPDs) are deflected into TEDs. The (0001) facet of the crystal is already formed at early stage growth at the edge of the wafer and high nitrogen incorporation in facet leads to conditions favorable for nucleation and glide of Shockley/double Shockley faults with layers of 3C-SiC deposited on facet acting as nuclei. Unique-shaped dislocations are observed at early stage growth, which are caused by deflection of TSDs/TMDs and TEDs by macrosteps near the periphery of the sample and the subsequent glide of the a components. The effect of the quality of the seed surface before growth is manifested as randomly oriented arrays of pairs of TEDs and TSDs/TMDs on the as grown surface resulting from residual surface damage from scratches.

36 MATERIALS SCIENCE↗

Effect of zeolite type, temperature, and pH on Stage III glass alteration behavior for two nuclear waste glasses

We report long-term laboratory scale static alteration tests (up to 1500 d) were conducted on two low-activity waste glasses (LAWA44 and IDF18-A161) at S/V = 2000 m –1 . Tests were seeded with either analcime, clinoptilolite, zeolite P1, or zeolite P2 to induce Stage III glass alteration behavior. The effect of several parameters on glass Stage III behavior was studied with consideration of several variables, including temperature (22 °C – 90 °C) and pH (floating or initially set using KOH at values from 9.5 to 11.5). Temporal solution data and solids characterization at the end of the experiments are reported. Solution data demonstrated the occurrence of a sustained rate acceleration at temperatures down to 40 °C and the activation energy for these Stage III rates was determined for both glasses. Three major secondary phases were identified at the end of the experiments for both glasses: zeolite P1, zeolite P2, and/or analcime (along with minor phases: zeolites, clays, carbonates). The identification of the crystalline phases at the end of the experiment often differed from the zeolite seed phase. In addition, the use of the Avrami equation showed unimpeded zeolite growth (3-dimensional) in certain conditions, suggesting that in certain conditions the glass dissolution rate is controlled by zeolite formation kinetics whereas in other conditions the glass corrosion process impeded zeolite formation kinetics. The morphological evolution of the samples revealed the growth of the zeolites which completely fill the intergranular space in the powder bed. These results are discussed with regards to previous seeded and unseeded Stage III dissolution rate experiments performed on low- and high-activity nuclear waste glasses.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Vapor-phase synthesis of uniform silica spheres through two-stage hydrolysis of SiCl{sub 4}

We report, for the first time, a vapor-phase synthesis of nearly monodispersed silica spheres 250-300 nm in size through a two-stage hydrolysis of SiCl{sub 4}. In the first stage, SiCl{sub 4} vapor was partially hydrolyzed with water vapor in a batch reactor at 150 deg. C to form silicon oxychloride particles, nearly monodispersed and spherical. In the second stage, these oxychloride particles were converted into silica particles through further hydrolysis at 1000 deg. C in a tubular reactor, while the morphology and size after the first-stage reaction remained virtually unchanged.

36 MATERIALS SCIENCE↗

Dosimetric difference amongst 3 techniques: TomoTherapy, sliding-window intensity-modulated radiotherapy (IMRT), and RapidArc radiotherapy in the treatment of late-stage nasopharyngeal carcinoma (NPC)

To investigate the dosimetric difference amongst TomoTherapy, sliding-window intensity-modulated radiotherapy (IMRT), and RapidArc radiotherapy in the treatment of late-stage nasopharyngeal carcinoma (NPC). Ten patients with late-stage (Stage III or IV) NPC treated with TomoTherapy or IMRT were selected for the study. Treatment plans with these 3 techniques were devised according to departmental protocol. Dosimetric parameters for organ at risk and treatment targets were compared between TomoTherapy and IMRT, TomoTherapy and RapidArc, and IMRT and RapidArc. Comparison amongst the techniques was done by statistical tests on the dosimetric parameters, total monitor unit (MU), and expected delivery time. All 3 techniques achieved similar target dose coverage. TomoTherapy achieved significantly lower doses in lens and mandible amongst the techniques. It also achieved significantly better dose conformity to the treatment targets. RapidArc achieved significantly lower dose to the eye and normal tissue, lower total MU, and less delivery time. The dosimetric advantages of the 3 techniques were identified in the treatment of late-stage NPC. This may serve as a guideline for selection of the proper technique for different clinical cases.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Two-stage membrane-based process utilizing highly CO 2 -selective membranes for cost and energy efficient carbon capture from coal flue gas: A process simulation study

Membrane technology for CO 2 capture has become an attractive strategy due to its cost and energy efficiency and low materials costs. In the past decade, membrane-based process designs for post-combustion power plant CO 2 capture have been developed, utilizing existing highly CO 2 -permeable membranes with relatively low CO 2 /N 2 selectivity (<50), and have obtained reasonably economic carbon capture. However, few membrane-based process designs were proposed for moderate to highly CO 2 -selective membranes (CO 2 /N 2 selectivity of 50–300, and >300, respectively), which have vastly emerged in recent years, such as various facilitated transport membranes (FTMs). Herein, we proposed a two-stage membrane-base process design targeting economic carbon capture from coal-fired flue gas. This process design features the utilization of highly CO 2 -selective membranes for one-stage CO 2 enrichment to 95% dry-base purity in the first stage and recycle of the remaining CO 2 by a highly CO 2 -permeable membrane in the second stage, in order to achieve economic CO 2 capture with 90% capture rate and >95% CO 2 product purity. Through an integration-iteration membrane model and the Aspen Plus process simulation, a sensitivity study of operating pressures (feed and permeate pressures) and membrane properties (CO 2 permeance and CO 2 /N 2 selectivity) was conducted. Critical CO 2 /N 2 selectivity of 300–400 was found for the highly CO 2 -selctive membranes to meet the demand for cost and energy efficient results. The lowest possible membrane area of 4.8 × 10 5 m 2 and fractional energy of 19.3% were obtained, which is comparable to or even more attractive than reported membrane-based process designs. Here, this work provides a new membrane process design option for highly CO 2 -selective membranes and gives insights on the influence of membrane performance and operation condition.

42 ENGINEERING↗

A framework to implement human reliability analysis during early design stages of advanced reactors

Nuclear power plants require human actions throughout their lifecycle from design, construction, operation, and decommissioning. However, for advanced reactors (e.g., Generation IV), the reliance on human intervention in safety-related actions is expected to be reduced or completely replaced by automated actions. The Probabilistic Risk Assessment (PRA) Standard for Advanced Non-LWR Nuclear Power Plants requires that the impacts of all operator actions are captured and incorporated in the risk of the modeled plant. Moreover, the Modernization of Technical Requirements for Licensing Advanced Reactors requires human reliability analysis (HRA) to be included throughout all design and PRA development stages. However, due to the lack of details during the early design stages, HRA is often postponed until the design is mature enough. Conducting HRA in later design stages, though it may be adequate in capturing pre-, at-, and post-initiators comes short of informing the design itself in the iterative design lifecycle. Hence, this paper presents a framework to include HRA during the design's early stages, pre-conceptual or conceptual. The proposed framework provides a process for the removal of operator actions that do not contribute to the risk and the identification of all key operator actions that are critical to the safety of the design. The results of this framework are then used to inform the design of those safety-related operator actions to update the design further. Then, using information from the updated design, this framework can be reapplied to investigate the impact of the design update on human reliability. The PRA model of the X-energy's pre-conceptual Xe-100 high-temperature gas-cooled pebble-bed reactor (HTGR-PB) design is used to demonstrate the approach. In the pre-conceptual Xe-100 PRA model, also called Phase 0 PRA model, human actions were considered an integral part of analyzing the plant response to different initiating events. Hence, in this paper, all possible human actions in the Xe-100 PRA model are identified, analyzed, and removed to emulate a design relying only on the available automated control systems. The preliminary results of this assessment show how safe the Xe-100 design is even without crediting any human actions. The results also list necessary sequences in which operator actions are critical to the risk profile of the design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

The effects of staged mixing on the dispersion of reinforcing fillers in elastomer compounds

Kinetically mixed reinforcing fillers are dispersed by accumulated strain. Processing conditions such as mixing geometry, intensity and the duration of mixing are key elements that control accumulated strain. A simple method to modify mechanical mixing is the mixing schedule which involves the timing of filler additions to a compound. For example, it is known that simultaneous addition of oil with filler is disadvantageous to dispersion, while the incorporation of oil after filler addition enhances dispersion. The simplest case of mixing schedule involves timed filler additions into an elastomer, for instance in a single stage or in two-stages. This study reported herein explores the effects of staged mixing on nanoscale dispersion based on a colloidal model. Dispersion is quantified using a pseudo-thermodynamic approach coupled with ultra-small angle X-ray scattering. It was found that single stage mixing yields optimal nano-dispersion for carbon-coated silica and carbon black in polybutadiene using an internal mixer.

36 MATERIALS SCIENCE↗

Methamidophos alters sperm function and DNA at different stages of spermatogenesis in mice

Methamidophos (MET) is a highly toxic organophosphate (OP) pesticide that is widely used in developing countries. MET has male reproductive effects, including decreased fertility. We evaluated MET effects on sperm quality, fertilization and DNA integrity, exploring the sensitivity of different stages of spermatogenesis. Adult male mice received MET (3.75 or 5 mg/kg-bw/ip/day/4 days) and were euthanized 1, 28 or 45 days post-treatment (dpt) to evaluate MET's effects on epididymal maturation, meiosis or mitosis, respectively. Spermatozoa were obtained from the cauda epididymis–vas deferens and were evaluated for sperm quality, acrosome reaction (AR; Coomassie staining), mitochondrial membrane potential (by JC-1), DNA damage (comet assay), oxidative damage (malondialdehyde (MDA) production), in vitro fertilization and protein phosphorylation (immunodetection), and erythrocyte acetylcholinesterase (AChE) activity. At 1-dpt, MET inhibited AChE (43–57%) and increased abnormal cells (6%). While at 28- and 45-dpt, sperm motility and viability were significantly reduced with an increasing MET dose, and abnormal morphology increased at 5 mg/kg/day/4 days. MDA and mitochondrial activity were not affected at any dose or time. DNA damage (OTM and %DNA) was observed at 5 mg/kg/day/4 days in a time-dependent manner, whereas both parameters were altered in cells from mice exposed to 3.75 mg/kg/day/4 days only at 28-dpt. Depending on the time of collection, initial-, spontaneous- and induced-AR were altered at 5 mg/kg/day/4 days, and the fertilization capacity also decreased. Sperm phosphorylation (at serine and tyrosine residues) was observed at all time points. Data suggest that meiosis and mitosis are the more sensitive stages of spermatogenesis for MET reproductive toxicity compared to epididymal maturation. - Highlights: • Methamidophos alters sperm cell function at different stages of spermatogenesis. • Testicular stages of spermatogenesis are more sensitive to methamidophos toxicity. • Methamidophos causes sperm DNA damage at mitosis, meiosis and epididymal maturation. • Sperm cell damage by methamidophos exposure may be related to protein phosphorylation.

60 APPLIED LIFE SCIENCES↗

Hormone-dependence of sarin lethality in rats: Sex differences and stage of the estrous cycle

Chemical warfare nerve agents (CWNAs) are highly toxic compounds that cause a cascade of symptoms and death, if exposed casualties are left untreated. Numerous rodent models have investigated the toxicity and mechanisms of toxicity of CWNAs, but most are limited to male subjects. Given the profound physiological effects of circulating gonadal hormones in female rodents, it is possible that the daily cyclical fluctuations of these hormones affect females' sensitivity to the lethal effects of CWNAs, and previous reports that included female subjects did not control for the stage of the hormonal cycle. The aim of the current study was to determine the 24-hour median lethal dose (LD{sub 50}) of the CWNA sarin in male, ovariectomized (OVEX) female, and female rats during different stages of the estrous cycle (diestrus, proestrus, and estrus). Additionally, baseline activity levels of plasma acetylcholinesterase, butyrylcholinesterase, and carboxylesterase were measured to determine differences among the groups. Results indicated that females in proestrus had a significantly higher LD{sub 50} of sarin compared to OVEX and estrous females. Although some sex differences were observed in the activity levels of plasma esterases, they were not consistent and likely not large enough to significantly affect the LD{sub 50}s. These results suggest that hormonal cyclicity can influence the outcome of CWNA-related studies using female rodents, and that this variability can be minimized by controlling for the stage of the cycle. Additional research is necessary to determine the precise mechanism of the observed differences because it is unlikely to be solely explained by plasma esterase activity. - Highlights: • The LD{sub 50} of sarin was determined in female rats throughout the stages of the estrous cycle. • Females in proestrus had a significantly higher LD{sub 50} compared to estrous or ovariectomized females. • No sex differences were observed between male and female rats. • It is unlikely that plasma esterase activity underlies the observed differences in LD{sub 50}s.

60 APPLIED LIFE SCIENCES↗

Hydrogen and methane production in a two-stage anaerobic digestion system by co-digestion of food waste, sewage sludge and glycerol

Highlights: • H{sub 2} and CH{sub 4} production was assessed in a two-stage acidogenesis-methanogenesis system. • Addition of glycerol to food waste and sewage sludge increased H{sub 2} and CH{sub 4} yields. • Stable H{sub 2} and CH{sub 4} production and higher energy yield were obtained at 1% glycerol. • The use of 3% glycerol led to process instabilities in the methanogenic phase. • Co-digestion of food waste, sewage sludge and glycerol maximizes energy production. - Abstract: In this study, hydrogen and methane production from co-digestion of food waste (FW), sewage sludge (SS) and raw glycerol (GL) was evaluated in a two-stage acidogenesis-methanogenesis anaerobic system under mesophilic conditions (35 °C). The effect of glycerol addition (1 and 3% v/v) as co-substrate was assessed in ternary mixtures (FW + SS + GL), with the concentration of all substrates kept at 10 g VS/L. Besides contributing to reduce the lag phase of the acidogenic bacterial culture, the presence of GL increased the hydrogen production in all tested conditions and the maximum hydrogen yield was obtained for the FW + SS + 3%GL mixture (179.3 mL H{sub 2}/g VS). On the other hand, the highest methane production (342 mL CH{sub 4}/g VS) was achieved in the test supplemented with 1% GL. At 3% GL, abrupt reductions in the biogas CH{sub 4} content and pH values resulting from instability in methanogenesis process were noticed over the experiment. By taking into account the hydrogen and methane production stages, the highest energy yield (i.e., 15.5 kJ/g VS) was obtained with the ternary mixture containing 1% GL. Overall, the results of this study demonstrate the feasibility of using glycerol as co-substrate to increase the H{sub 2} and CH{sub 4} production efficiency in a two-stage anaerobic co-digestion process, allowing simultaneous treatment of three residues (FW, SS and GL) and energy production.

08 HYDROGEN↗

A Multi-Stage Wear Model for Grid-to-Rod Fretting of Nuclear Fuel Rods

The wear of fuel rod cladding against the supporting structures in the cores of pressurized water nuclear reactors (PWRs) is an important and potentially costly tribological issue. Grid-to-rod fretting (GTRF), as it is known, involves not only time-varying contact conditions, but also elevated temperatures, flowing hot water, aqueous tribo-corrosion, and the embrittling effects of neutron fluences. The multi-stage, closed-form analytical model described in this paper relies on published out-of-reactor wear and corrosion data and a set of simplifying assumptions to portray the conversion of frictional work into wear depth. The cladding material of interest is a zirconium-based alloy called Zircaloy-4, and the grid support is made of a harder and more wear-resistant material. Focus is on the wear of the cladding. The model involves an incubation stage, a surface oxide wear stage, and a base alloy wear stage. The wear coefficient, which is a measure of the efficiency of conversion of frictional work into wear damage, can change to reflect the evolving metallurgical condition of the alloy. Wear coefficients for Zircaloy-4 and for a polyphase zirconia layer were back-calculated for a range of times required to wear to a critical depth. Inputs for the model, like the friction coefficient, are taken from the tribology literature in lieu of in-reactor tribological data. Concepts of classical fretting were used as a basis, but are modified to enable the model to accommodate the complexities of the PWR environment. Factors like grid spring relaxation, pre-oxidation of the cladding, multiple oxide phases, gap formation, impact, and hydrogen embrittlement are part of the problem definition but uncertainties in their relative roles limits the ability to validate the model. Sample calculations of wear depth versus time in the cladding illustrate how GTRF wear might occur in a discontinuous fashion during months-long reactor operating cycles. A means to account for grid/rod gaps and repetitive impact effects on GTRF wear is proposed

fretting↗

The Influence of Intake Pressure and Ethanol Addition to Gasoline on Single- and Dual-Stage Autoignition in an HCCI Engine

Autoignition in HCCI engines is known to be controlled by the combustion kinetics of the in-cylinder fuel/air mixture which is highly influenced by the amount of low-temperature and intermediate-temperature heat release (LTHR and ITHR) that occurs. At lower intake pressures (typically <1.4 bar absolute), it has been observed that gasoline behaves as a single-stage heat release fuel, while at higher intake pressures (typically >1.8 bar absolute) gasoline behaves as a two-stage heat release fuel. Furthermore, ethanol blending into gasoline strongly affects heat release characteristics, and this warrants further investigation. This paper experimentally investigates the conditions under which gasoline transitions from a single-stage heat release fuel to a two-stage heat release fuel as intake pressure is increased. Experiments were performed in single-cylinder HCCI engine fueled with two research-grade gasolines, FACE A and FACE C. These gasolines were tested neat, and with 10% and 20% (by volume) ethanol addition. In addition, these results were compared to results previously obtained for PRF 85, and new results for PRF 84 with 10% and 20% ethanol addition. Moreover, the engine experiments were supported by rapid compression machine (RCM) ignition delay data for the same fuels. The engine experiments revealed that there were minimal differences between the heat release profiles of the two gasolines, FACE A and FACE C, a result which was supported by the RCM experiments that showed similar ignition delay times for the two FACE fuels and PRF 84. On the other hand, with ethanol addition to these gasolines and PRF 84, the occurrence of LTHR shifted to higher intake pressures compared to ethanol-free cases, from 1.4 bar intake pressure for neat fuel to 2.2 bar with 20% ethanol. Consequently, the intake temperatures required to achieve constant combustion phasing for all mixtures were drastically altered. Simulations using a detailed chemical kinetic model were utilized to understand the effects of ethanol blending on the ignition characteristics of PRF 84. The addition of ethanol was found to act as a radical sink where it inhibits the radical pool formation during the low (<850 K) and intermediate (850–1050 K) temperature chemistry regimes resulting in lower reactivity. These results help explain ethanol’s significant antiknock qualities under boosted conditions in spark-ignition engines.

42 ENGINEERING↗

Evidence of Kinetic Control of Ligand Binding and Staged Product Release in MurA (enolpyruvyl UDP-GlcNAc synthase)-catalyzed Reactions

MurA (enolpyruvyl UDP-GlcNAc synthase) catalyzes the first committed step in peptidoglycan biosynthesis. In this study, MurA-catalyzed breakdown of its tetrahedral intermediate (THI), with a k{sub cat}/K{sub M} of 520 M{sup -1} s{sup -1}, was far slower than the normal reaction, and 3 x 10{sup 5}-fold slower than the homologous enzyme, AroA, reacting with its THI. This provided kinetic evidence of slow binding and a conformationally constrained active site. The MurA cocrystal structure with UDP-N-acetylmuramic acid (UDP-MurNAc), a potent inhibitor, and phosphite revealed a new 'staged' MurA conformation in which the Arg397 side chain tracked phosphite out of the catalytic site. The closed-to-staged transition involved breaking eight MurA {center_dot} ligand ion pairs, and three intraprotein hydrogen bonds helping hold the active site loop closed. These were replaced with only two MurA {center_dot} UDP-MurNAc ion pairs, two with phosphite, and seven new intraprotein ion pairs or hydrogen bonds. Cys115 appears to have an important role in forming the staged conformation. The staged conformation appears to be one step in a complex choreography of release of the product from MurA.

08 HYDROGEN↗

Staged Self-Assembly of Colloidal Metastructures

We demonstrate sequential assembly of chemically patchy colloids such that their valence differs from stage to stage to produce hierarchical structures. For proof of concept, we employ ACB triblock spheres suspended in water, with the C middle band electrostatically repulsive. In the first assembly stage, only A–A hydrophobic attraction contributes, and discrete clusters form. They can be stored, but subsequently activated to allow B–B attractions, leading to higher-order assembly of clusters with one another. The growth dynamics, observed at a single particle level by fluorescence optical microscopy, obey the kinetics of stepwise polymerization, forming chains, pores, and networks. Between linked clusters, we identify three possible bond geometries, linear, triangular, and square, by an argument that is generalizable to other patchy colloid systems. Furthermore, this staged assembly strategy offers a promising route to fabricate colloidal assemblies bearing multiple levels of structural and functional complexity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗