Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Satellite-based Assessment of Global Warm Cloud Properties Associated with Aerosols, Atmospheric Stability, and Diurnal Cycle

This study examines variability in marine low cloud properties derived from semi-global observations by the Tropical Rainfall Measuring Mission (TRMM) satellite, as linked to the aerosol index (AI) and lower-tropospheric stability (LTS). AI is derived from the Moderate Resolution Imaging Spectroradiometer (Terra MODIS) sensor and the Goddard Chemistry Aerosol Radiation and Transportation (GOCART) model, and is used to represent column-integrated aerosol concentrations. LTS is derived from the NCEP/NCAR reanalysis, and represents the background thermodynamic environment in which the clouds form. Global statistics reveal that cloud droplet size tends to be smallest in polluted (high-AI) and strong inversion (high-LTS) environments. Statistical quantification shows that cloud droplet size is better correlated with AI than it is with LTS. Simultaneously, the cloud liquid water path (CLWP) tends to decrease as AI increases. This correlation does not support the hypothesis or assumption that constant or increased CLWP is associated with high aerosol concentrations. Global variability in corrected cloud albedo (CCA), the product of cloud optical depth and cloud fraction, is very well explained by LTS, while both AI and LTS are needed to explain local variability in CCA. Most of the local correlations between AI and cloud properties are similar to the results from the global statistics, while weak anomalous aerosol-cloud correlations appear locally in the regions where simultaneous high (low) AI and low (high) LTS compensate each other. Daytime diurnal cycles explain additional variability in cloud properties. CCA has the largest diurnal cycle in high-LTS regions. Cloud droplet size and CLWP have weak diurnal cycles that differ between clean and polluted environments. The combined results suggest that investigations of marine low cloud radiative forcing and its relationship to hypothesized aerosol indirect effects must consider the combined effects of aerosols, thermodynamics, and the diurnal cycle.

Matsui, Toshihisa↗

Crystal structure and elementary electronic properties of Bi-stabilized α-In{sub 2}Se{sub 3}

Highlights: • The introduction of Bi stabilizes α-In{sub 2}Se{sub 3} and facilitates the crystal growth. • Optical measurements show an indirect band gap. • Transport measurements show semiconducting temperature dependence. - Abstract: The introduction of Bi as a substitution for In at ∼12% in In{sub 2}Se{sub 3} stabilizes the α-polymorph and facilitates the crystal growth by the modified Bridgeman method. The crystal structure (R−3m, Z = 3, a = 3.9978(8) Å, c = 28.276(6) Å) and composition, (In{sub 0.88}Bi{sub 0.12}){sub 2}Se{sub 3}, of the crystals were determined by single crystal X-ray diffraction. The structure, of the tetradymite type, displays positional disorder within the middle Se layer. Optical measurements indicate that (In{sub 0.88}Bi{sub 0.12}){sub 2}Se{sub 3} has an indirect band gap of about 1.19 eV, shown by electronic structure calculations to be from valence band states near the Γ point to conduction band states at the L point. Resistivity and Hall effect measurements on Sn-doped crystals of composition (In{sub 0.88}Bi{sub 0.115}Sn{sub 0.005}){sub 2}Se{sub 3} show it to have a relatively high semiconducting resistivity, about 6 × 10{sup 4} Ω cm at 300 K, with an n-type carrier concentration varying from 10{sup 12}/cm{sup 3} at 300 K to 10{sup 15}/cm{sup 3} at 400 K.

36 MATERIALS SCIENCE↗

Origin of the enhanced piezoelectric thermal stability in BiScO 3 -PbTiO 3 single crystals

BiScO 3 -PbTiO 3 single crystals were reported to possess high piezoelectric coefficient of 1200 pC/N and Curie temperature of >400 °C, exhibiting excellent thermal stability of properties up to 350 °C. However, the origin of the thermal stability is yet unclear. In this research, high resolution synchrotron-based technique was used to study the temperature driven structural evolution in BiScO 3 -PbTiO 3 system, where two competing symmetries and local distortion were observed, accounting for the high piezoelectric activity. Here, a strong correlation between thermal stability of structure and temperature-dependent properties was established, which will benefit the design of ferroelectric materials with broad temperature usage range.

36 MATERIALS SCIENCE↗

Enabling Tailorable Optical Properties and Markedly Enhanced Stability of Perovskite Quantum Dots by Permanently Ligating with Polymer Hairs

Abstract Instability of perovskite quantum dots (QDs) toward humidity remains one of the major obstacles for their long‐term use in optoelectronic devices. Herein, a general amphiphilic star‐like block copolymer nanoreactor strategy for in situ crafting a set of hairy perovskite QDs with precisely tunable size and exceptionally high water and colloidal stabilities is presented. The selective partition of precursors within the compartment occupied by inner hydrophilic blocks of star‐like diblock copolymers imparts in situ formation of robust hairy perovskite QDs permanently ligated by outer hydrophobic blocks via coprecipitation in nonpolar solvent. These size‐ and composition‐tunable perovskite QDs reveal impressive water and colloidal stabilities as the surface of QDs is intimately and permanently ligated by a layer of outer hydrophobic polymer hairs. More intriguingly, the readily alterable length of outer hydrophobic polymers renders the remarkable control over the stability enhancement of hairy perovskite QDs.

Yoon, Young Jun↗

Stability, Electronic and Magnetic Properties of Rare Earth (Eu, Tm) Implanted InGaN

The electronic structure and magnetic behavior of InGaN:RE (RE = Eu, Tm) have been studied by using scalar relativistic full-potential linear augmented-plane-wave plus local orbital (FPLAPW + lo) calculations with LSDA+U approximation. Band structure and density of states are analyzed. It appears that the In-site is the preferred site for doping InGaN alloy with rares earth (Eu, Tm) from the formation energy. Our study reveals that these materials are semiconductors with a direct band gap of 1.2345 eV and 1.3657 eV for InGaN:Eu and InGaN:Tm respectively. The total energy of the FM phase is lower than the AFM total energy; this confirms the fact that the ground state at zero temperature is ferromagnetic. A small-induced magnetic moment on other nonmagnetic atoms (Ga, In, and N) and the total magnetic moment of these compounds is mainly due to RE-4f states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal energy storage composites with preformed expanded graphite matrix and paraffin wax for long-term cycling stability and tailored thermal properties

Harvesting solar energy, preventing hot spots in electronics, transport of temperature-sensitive materials, and capture and repurposing of thermal energy require a latent heat thermal energy storage (TES) system to store/discharge heat repeatedly. For the practical application of phase change material (PCM) composites within TES systems, reliable thermal performance throughout its operational lifetime is essential. Nevertheless, the reliability of thermal conductivity in multi-phase composites over relevant numbers (>10 3 ) of melt/freeze cycles has barely been studied, particularly for composites containing fillers for thermal conductivity enhancement. Here, we introduce a preform-type expanded graphite (EG)/paraffin wax composite possessing highly robust heat transfer and storage properties even after 10,000 melt/freeze cycles. To achieve such excellent reliability, comparative studies on the combined influence of fabrication process, particle size, EG vol%, binder amount, and compaction on both magnitude and robustness of thermal conductivity were undertaken. Our parametric study has yielded a trade-off between thermal conductivity and latent heat. Based on our modeling, 20 vol% EG approaches the case where all EG particles are well-connected thermally while 10 vol% EG is close to loosely connected fillers in the matrix. Thermal conductivity of our paraffin composites containing 20 vol% EG (25.1 W·m -1 ·K -1 ) is highest among other EG/paraffin composites without aligned EG in the literature. After 10,000 thermal cycling, negligible conductivity fading was observed for the 10 vol% EG composite, while reduction in latent heat remained within 10% for all 10, 14, 17 and 20 vol% EG samples. Here we anticipate this work provides insight on suitable recipe for desirable magnitude and robustness of thermal conductivity of EG/paraffin composites.

25 ENERGY STORAGE↗

Structural, electronic and optical properties of novel carbonate fluorides ABCO{sub 3}F (A=K, Rb, Cs; B=Ca, Sr)

In the present study, we performed first principles calculations on the electronic and optical properties of layered alkali–alkaline earth carbonate fluorides which attract attention in the domain of nonlinear optics. The calculated lattice parameters and volumes with and without inclusion of van der Waals (vdW) correction methods to standard density functional methods were compared with experiments. We observed that vdW interactions are predominant in RbCaCO{sub 3}F and CsCaCO{sub 3}F as compared with other computed compounds. The calculated bulk modulus from single crystal elastic constants reveals that these materials are all relatively harder than the KH{sub 2}PO{sub 4} (KDP) crystal. We also found that these materials are wide band gap insulators as obtained from Tran–Blaha modified Becke–Johnson potential. The linear optical properties such as dielectric function, refractive indices, birefringence and absorption spectra are presented. Finally, the calculated birefringence values indicate that these crystals could be promising for producing phase matching in the deep ultra-violet region. - Graphical abstract: The co- and anti-parallel alignment of CO{sub 3} groups leads to larger and smaller SHG coefficients in (a) KCaCO{sub 3}F, (b) KSrCO{sub 3}F, (c) RbSrCO{sub 3}F, (d) RbCaCO{sub 3}F, and (e) CsCaCO{sub 3}F. - Highlights: • Effect of van der Waals interactions on structural properties. • Single-crystalline elastic constants and mechanical stability. • Electronic properties. • Linear optical properties. • Comparison of present computed compounds with other well known materials in non-linear optical materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coprecipitation of Fe/Cr Hydroxides with Organics: Roles of Organic Properties in Composition and Stability of the Coprecipitates

Iron hydroxides are important scavengers for dissolved chromium (Cr) via coprecipitation processes; however, the influences of organic matter (OM) on Cr sequestration in Fe/ Cr-OM ternary systems and the stability of the coprecipitates are not well understood. Here, Fe/Cr-OM coprecipitation was conducted at pH 3, and Cr hydroxide was undersaturated. Acetic acid (HAc), poly(acrylic acid) (PAA), and Suwannee River natural organic matter (SRNOM) were selected as model OMs, which showed different complexation capabilities with Fe/Cr ions and Fe/Cr hydroxide particles. HAc had no significant effect on the coprecipitation, as the monodentate carboxyl ligand in HAc did not favor complexation with dissolved Fe/Cr ions or Fe/Cr hydroxide nanoparticles. Contrarily, PAA and SRNOM with polydentate carboxyl ligand had strong complexation with Fe/Cr ions and Fe/Cr hydroxide nanoparticles, leading to significant amounts of PAA/SRNOM sequestered in the coprecipitates, which caused the structural disorder and fast aggregation of the coprecipitates. In comparison with that of PAA, preferential complexation of Cr ions with SRNOM resulted in higher Cr/Fe ratios in the coprecipitates. This study advances the fundamental understanding of Fe/Cr-OM coprecipitation and mechanisms controlling the composition and stability of the coprecipitates, which is essential for successful Cr remediation and removal in both natural and engineered settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principle study of geometric stabilities, electronic and magnetic properties of low coverage vanadium adsorption on graphene

Stable geometries, electronic and magnetic properties of low coverage vanadium (V) atoms adsorption on graphene sheet have been investigated by first principles calculations, using generalized gradient approximation. Calculation shows that center of the ring is energetically favorable for both V adatom and perpendicular dimer after relaxation. Moreover, the proportion of orbital contribution of C-V bonding are mainly dominated by 2p{sub z} orbital of C and partially occupied by the 3d like states of V. It is also found that the low coverage V atom adsorbed graphene system is metallic and magnetic, and has demonstrated additional hint on its usefulness in magnetic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural stability, vibrational, and bonding properties of potassium 1, 1′-dinitroamino-5, 5′-bistetrazolate: An emerging green primary explosive

Potassium 1,1′-dinitroamino-5,5′-bistetrazolate (K{sub 2}DNABT) is a nitrogen rich (50.3% by weight, K{sub 2}C{sub 2}N{sub 12}O{sub 4}) green primary explosive with high performance characteristics, namely, velocity of detonation (D = 8.33 km/s), detonation pressure (P = 31.7 GPa), and fast initiating power to replace existing toxic primaries. In the present work, we report density functional theory (DFT) calculations on structural, equation of state, vibrational spectra, electronic structure, and absorption spectra of K{sub 2}DNABT. We have discussed the influence of weak dispersive interactions on structural and vibrational properties through the DFT-D2 method. We find anisotropic compressibility behavior (b<a<c) from pressure dependent structural properties. The predicted equilibrium bulk modulus reveals that K{sub 2}DNABT is softer than toxic lead azide and harder than the most sensitive cyanuric triazide. A complete assignment of all the vibrational modes has been made and compared with the available experimental results. The calculated zone center IR and Raman frequencies show a blue-shift which leads to a hardening of the lattice upon compression. In addition, we have also calculated the electronic structure and absorption spectra using recently developed Tran Blaha-modified Becke Johnson potential. It is found that K{sub 2}DNABT is a direct band gap insulator with a band gap of 3.87 eV and the top of the valence band is mainly dominated by 2p-states of oxygen and nitrogen atoms. K{sub 2}DNABT exhibits mixed ionic (between potassium and tetrazolate ions) and covalent character within tetrazolate molecule. The presence of ionic bonding suggests that the investigated compound is relatively stable and insensitive than covalent primaries. From the calculated absorption spectra, the material is found to decompose under ultra-violet light irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

1.3-µm passively mode-locked quantum dot lasers epitaxially grown on silicon: gain properties and optical feedback stabilization

Abstract This work reports on an investigation of the optical feedback in an InAs/InGaAs passively mode-locked quantum dot (QD) laser epitaxially grown on silicon. Under the stably-resonant optical feedback condition, experiments demonstrate that the radio-frequency linewidth is narrowed whatever the bias voltage applied on the saturable absorber (SA) is; on the other hand, the effective linewidth enhancement factor of the device increases with the reverse bias voltage on the SA, hence it is observed that such an increase influences the mode-locking dynamic and the stability of device under optical feedback. This work gives insights for stabilizing epitaxial QD mode-locked lasers on silicon which is meaningful for their applications in future large-scale silicon electronic and photonic applications requiring low power consumption as well as for high-speed photonic analog-to-digital conversion, intrachip/interchip optical clock distribution and recovery.

Dong, Bozhang (ORCID:0000000158266723)↗

Effect of Deposition Conditions on Phase Content and Mechanical Properties of Yttria-Stabilized Zirconia Thin Films Deposited by Sol-Gel/Dip-Coating

The effect of yttria concentration (0-33.4 mol%), extraction rates (0.17, 0.33, 0.50, and 0.67 mm s -1 ), and the number of layers (up to four) on the phase content, surface defects, thickness, hardness, adhesion strength, and wear rate of yttria-stabilized zirconia coatings produced by sol-gel/dip-coating were studied for its use on thermolabile substrates. At 700°C, a metastable tetragonal phase ($\mathcal{t''}$) was obtained even with 33.4 mol% yttria when heat treated for 24 hours; however, a fully cubic structure was attained by extending the heat treatment up to 48 hours as confirmed by Raman spectroscopy. Furthermore, it was necessary to use withdrawal speeds of at least 0.67 mm s -1 to produce defect-free coatings. Although the coatings were produced at low temperature, they showed 41% lower wear rate than steel and an adhesion strength of 30 MPa. Our work stresses the importance of the heat treatment history on the stabilization of the cubic phase in sol-gel YSZ coatings.

36 MATERIALS SCIENCE↗