Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source location”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Use of Beacon Satellites for Efficient Uplink Transmission for Free-Space Quantum Entanglement Distribution

Efficient transmission of optical beams from ground to space is important for free-space entanglement distribution in a dual-uplink architecture in which photons from entanglement sources at two ground locations interact in an optical Bell-state measurement implemented on a satellite. Efficient transmission requires large transmitting apertures to minimize diffraction losses and high-performance adaptive optics to overcome the effects of atmospheric turbulence. Achieving good atmospheric compensation for beams transmitted to satellites is challenging because the need to point ahead of the satellite introduces anisoplanatism error that limits the effectiveness of the adaptive optics. An attractive approach for solving the point-ahead problem is to position a separate small satellite at the point-ahead location to provide a beacon source for the adaptive optics. This paper presents analysis of the requirements for the beacon source(s) for a dual-uplink entanglement-distribution demonstration. A relative performance metric is defined and evaluated for multiple beacon configurations, from a single, fixed beacon serving both ground sites to a dedicated beacon for each site continually adjusted to be at the correct point-ahead distance from the target satellite.

quantum↗
NASA NTRSDate not supplied

Aeroacoustic Computations of a Transonic Truss-Braced Wing Aircraft: Part 2 – Acoustic Signature and Noise Source Identification

High-fidelity, time-dependent simulations of a Boeing-designed, transonic, truss-braced-wing aircraft in cruise (clean) and landing configurations are leveraged to generate synthetic microphone-phased-array data for airframe noise prediction and assessment. These data sets are used to compute source localization (beamform) maps to determine the location and strength of primary and secondary airframe noise sources associated with this unique configuration. The synthetic phased-array implementation mimics the setup of a flight test. As this study is ongoing, preliminary integrated far-field spectra for the cruise configuration obtained at multiple spatial resolutions revealed significant tonal content that lacked convergence with increased resolution. The origin of several of these tones and their unusual convergence behavior was traced to the larger-than-normal trailing-edge thickness of the “as-tested” cruise model being simulated. Reducing the trailing-edge thickness to more realistic values eliminated most of the tones at low to moderate frequencies and improved spectrum convergence significantly. Applying lessons learned from the cruise simulations, several modifications to the geometry of the landing configuration were made and are described in this work. Results from permeable and solid Ffowcs-Williams and Hawkings surfaces at two different spatial resolutions (coarse and medium) are used to illustrate the major noise sources and determine convergence of the CLEAN integrated noise levels for the entire aircraft as well as major subcomponents. We demonstrate that the low-frequency content of the far-field spectrum is dominated by noise generated from the main landing gear, while the medium- and high-frequency content is dominated by the wing-leading-edge Krueger flaps. Since analysis of the acoustic maps for the landing configuration revealed several clusters of multiple sources along the wing leading edge, “high resolution” processing of the array data was used to distinguish more accurately the locations of sources.

Transonic Truss-Braced Wing↗
NASA NTRS1976

Terrestrial kilometric radiation: 1: Spatial structures studies

Observations are presented of lunar occultations of the earth at 250 kHz obtained with the Radio-Astronomy-Explorer-2 satellite which were used to derive two dimensional maps of the location of the sources of terrestrial kilometric radiation (TKR). By examining the two dimensional source distributions as a function of the observer's location (lunar orbit) with respect to the magnetosphere, the average three dimensional location of the emission regions can be estimated. Although TKR events at 250 kHz can often be observed at projected distances corresponding to the 250 kHz electron gyro or plasma level (approximately 2 earth radii), many events are observed much farther from the earth (between 5 and 15 earth radii). Dayside emission apparently in the region of the polar cusp and the magnetosheath and night emission associated with regions of the magnetotail are examined. The nightside emission is suggestive of a mechanism involving plasma sheet electron precipitation in the pre-midnight sector.

Alexander, J. K.↗
NASA NTRS1976

Terrestrial kilometric radiation. I - Spatial structure studies

Observations of lunar occultations of earth at 250 kHz, obtained with the Radio Astronomy Explorer 2 satellite, have been used to derive two-dimensional maps of the location of the sources of terrestrial kilometric radiation (TKR). By examining the two-dimensional source distributions as a function of the observer's location (lunar orbit) with respect to the magnetosphere, the average three-dimensional location of the emission regions can be estimated. Although TKR events at 250 kHz can often be observed at projected distances corresponding to the 250-kHz electron gyro or plasma level (about 2 earth radii), many events are observed much farther from earth (about 5 to 15 radii). On the dayside, emission was apparently observed in the region of the polar cusp and the magnetosheath at a magnetic latitude of about 70 deg; in the night hemisphere, emission is found to be associated with regions of the magnetotail at latitudes of at least 70 deg. The nightside emission is suggestive of a mechanism involving plasma-sheet electron precipitation in the premidnight sector.

Alexander, J. K.↗
NASA NTRS1977

Study of large adaptive arrays for space technology applications

The research in large adaptive antenna arrays for space technology applications is reported. Specifically two tasks were considered. The first was a system design study for accurate determination of the positions and the frequencies of sources radiating from the earth's surface that could be used for the rapid location of people or vehicles in distress. This system design study led to a nonrigid array about 8 km in size with means for locating the array element positions, receiving signals from the earth and determining the source locations and frequencies of the transmitting sources. It is concluded that this system design is feasible, and satisfies the desired objectives. The second task was an experiment to determine the largest earthbound array which could simulate a spaceborne experiment. It was determined that an 800 ft array would perform indistinguishably in both locations and it is estimated that one several times larger also would serve satisfactorily. In addition the power density spectrum of the phase difference fluctuations across a large array was measured. It was found that the spectrum falls off approximately as f to the minus 5/2 power.

Berkowitz, R. S.↗
NASA NTRS1979

X-ray emission from the region of gamma 195 plus 5

X-ray emission from the vicinity of the MeV gamma ray source, gamma 195+5, was observed with the HEAO-A2 detectors. A source with an intensity of (1.5 + pr - 0.5) x 10 to the -11th power erg/sq cm s (2-6 keV) was seen in each of two separate observations at a combined confidence level of 3.1 sigma. The location of the source is l2 = 194.56 degrees, b2 = 4.92 degrees with a 90% confidence error box of 1.4 square degrees, significantly smaller than the positional uncertainty of the gamma ray source, and consistent with its location. The chance overlap of such an X-ray source with the gamma ray region is estimated to be 9% and, therefore, they may be 9% and therefore they may be associated. The spectrum appears too steep to extrapolate simply to the 100 MeV flux value for gamma 195+5.

Worrall, D. M.↗
NASA NTRS2013

The First Fermi-LAT Catalog of Sources Above 10 GeV

We present a catalog of gamma-ray sources at energies above 10 GeV based on data from the Large Area Telescope (LAT) accumulated during the first 3 yr of the Fermi Gamma-ray Space Telescope mission. The first Fermi-LAT catalog of >10 GeV sources (1FHL) has 514 sources. For each source we present location, spectrum, a measure of variability, and associations with cataloged sources at other wavelengths. We found that 449 (87%) could be associated with known sources, of which 393 (76% of the 1FHL sources) are active galactic nuclei. Of the 27 sources associated with known pulsars, we find 20 (12) to have significant pulsations in the range >10 GeV (>25 GeV). In this work we also report that, at energies above 10 GeV, unresolved sources account for 27% +/- 8% of the isotropic γ -ray background, while the unresolved Galactic population contributes only at the few percent level to the Galactic diffuse background. We also highlight the subset of the 1FHL sources that are best candidates for detection at energies above 50-100 GeV with current and future ground-based γ -ray observatories.

catalogs↗
NASA NTRS1980

An advanced panel method for analysis of arbitrary configurations in unsteady subsonic flow

An advanced method is presented for solving the linear integral equations for subsonic unsteady flow in three dimensions. The method is applicable to flows about arbitrary, nonplanar boundary surfaces undergoing small amplitude harmonic oscillations about their steady mean locations. The problem is formulated with a wake model wherein unsteady vorticity can be convected by the steady mean component of flow. The geometric location of the unsteady source and doublet distributions can be located on the actual surfaces of thick bodies in their steady mean locations. The method is an outgrowth of a recently developed steady flow panel method and employs the linear source and quadratic doublet splines of that method.

Dusto, A. R.↗
NASA NTRS1984

Effect of a buried-wire gage on the separation bubble Numerical study

A numerically simulated buried-wire separation gage is investigated with emphasis on its effect on the separation bubble. The conjugated problem of a supersonic, time-dependent, two-dimensional flowfield above a conductive solid wall with an embedded heat source is solved using implicit finite difference algorithms. Steady-state and transient cases were computed for different locations of the heat source within the bubble. Results show that by using a steady heat source, the flow direction near the wall can be detected, without distorting the flowfield, only if the source is located in regions where the bubble is thick (i.e., not too close to the separation). The flow direction near separation can be detected by using a temperature pulse at the solid/fluid interface with insignificant distortion of the flowfield.

Degani, D.↗
NASA NTRS1980

VLA observations of impulsive solar flares at 4.9 GHz

A series of snapshot synthesis maps constructed as a function of time provided a complete mapping of source structure in one dimension and absolute location in two dimensions of five impulsive solar microwave bursts observed during July 15-18, 1978. It was found that all five flares were dominated by a single 12-18 arcsec source located between the H-alpha kernels, near the magnetic neutral line. Spectral data from Sagamore Hill (1.4-35 GHz) show that the spectral turnover at low frequencies results from the absorption by the ambient active region; these results, together with the observed magnetic configuration, suggest a model which could explain the evolution in source structure at 4.9 GHz in terms of magnetic reconnection which starts below the optical depth of the ambient active region equal to 1.

Marsh, K. A.↗
NASA NTRS2006

Understanding X-Ray Source Motions in a Solar Flare Loop

RHESSI images of a solar flare on 2002 November 28 showed a 3-6 keV hard X-ray source that was initially located at the flare loop top, split and propagated to the foot points of the loop during the flare rise phase, and then propagated back up to the loop top during the declining phase of the flare (Sai, Holman, & Dennis 2006). Higher energy X-ray sources were located lower in the legs of the loop during this period of source evolution, with X-rays above 25 keV seen only at the foot points. Sui, Holman, & Dennis suggested that this spatial evolution reflected the evolution of the spectral index and low-energy cutoff to the distribution of accelerated electrons in the flare. We construct a model flare loop and electron distribution injected at the top of this loop to reproduce the source evolution of the November 28 flare. We determine the constraints on the loop model and the evolution of the accelerated electron distribution. We also study the implications of the model for energy deposition into the loop plasma, and the integrated and imaged X-ray spectra. This work is supported in part by the RHESSI Project and the NASA Guest Investigator Program.

Holman, Gordon D.↗
NASA NTRS1974

Interpretation of air pollution data as measured by an airborne remote sensor

The investigation described is a continuation of the work reported by Smith et al. (1974) in which a single source was studied. In the current study, multiple sources of known location are considered. The study is concerned with the strength of each source and the resulting pollution concentration field. The characteristics of the remotely sensed data are discussed along with the parameter estimation procedure, the estimation of pollution parameters, and a numerical example.

Smith, G. L.↗
NASA NTRS1992

A study on vortex flow control on inlet distortion in the re-engined 727-100 center inlet duct using computational fluid dynamics

Computational fluid dynamics was used to investigate the management of inlet distortion by the introduction of discrete vorticity sources at selected locations in the inlet for the purpose of controlling secondary flow. These sources of vorticity were introduced by means of vortex generators. A series of design observations were made concerning the importance of various vortex generator design parameters in minimizing engine face circumferential distortion. The study showed that vortex strength, generator scale, and secondary flow field structure have a complicated and interrelated influence on the engine face distortion, over and above the initial geometry and arrangement of the generators. The installed vortex generator performance was found to be a function of three categories of variables: the inflow conditions, the aerodynamic characteristics associated with the inlet duct, and the design parameters related to the geometry, arrangement, and placement of the vortex generators within the outlet duct itself.

Anderson, Bernhard H.↗
NASA NTRS1992

Locating very high energy gamma ray sources with arc minute accuracy

The angular accuracy of gamma-ray detectors is intrinsically limited by the physical processes involved in photon detection. Although a number of point-like sources were detected by the COS-B satellite, only two were unambiguously identified by time signature with counterparts at longer wavelengths. By taking advantage of the extended longitudinal structure of Very High Energy gamma-ray showers, measurements in the TeV energy range can pinpoint source coordinates to arc minute accuracy. This was demonstrated using Cerenkov air shower imaging techniques. With two telescopes in coincidence, the individual event circular probable error will be 0.13 deg. The half-cone angle of the field of view is effectively 1 deg.

Akerlof, C. W.↗
NASA NTRS1992

A study on vortex flow control of inlet distortion in the re-engined 727-100 center inlet duct using computational fluid dynamics

Computational fluid dynamics was used to investigate the management of inlet distortion by the introduction of discrete vorticity sources at selected locations in the inlet for the purpose of controlling secondary flow. These sources of vorticity were introduced by means of vortex generators. A series of design observations were made concerning the importance of various vortex generator design parameters in minimizing engine face circumferential distortion. The study showed that vortex strength, generator scale, and secondary flow field structure have a complicated and interrelated influence on the engine face distortion, over and above the initial geometry and arrangement of the generators. The installed vortex generator performance was found to be a function of three categories of variables: the inflow conditions, the aerodynamic characteristics associated with the inlet duct, and the design parameters related to the geometry, arrangement, and placement of the vortex generators within the outlet duct itself.

Anderson, Bernhard H.↗
NASA NTRS1992

Gamma-ray burst locations from the Burst and Transient Source Experiment

The Burst and Transient Source Experiment (BATSE) consists of eight anisotropic gamma-ray spectrometers at the corners of the Compton Gamma Ray Observatory. BATSE monitors the full sky from a fixed orientation and determines the direction of gamma-ray bursts with an accuracy appropriate for studying the bursts' celestial distribution. We describe the calculation of gamma-ray burst directions from measurements made by BATSE. We present a sample of calculated directions from BATSE's measurement of solar flaxes and compare the calculated directions with the solar direction. We describe the systematic errors apparent in these data and discuss ongoing efforts to correct them.

Brock, M. N.↗