Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solid solution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Large reduction of thermal conductivity leading to enhanced thermoelectric performance in p-type Mg 3 Bi 2 –YbMg 2 Bi 2 solid solutions

Intensifying the phonon scattering via point defect engineering has been demonstrated to be particularly effective in minimizing the lattice thermal conductivity for enhancing thermoelectric performance. In this work, significant phonon scattering has been realized by alloying YbMg 2 Bi 2 with Mg 3 Bi 2 . The substantial mass difference between the host atom Yb and the alloying atom Mg leads to an intense phonon scattering effect that significantly reduces the lattice thermal conductivity. The room-temperature lattice thermal conductivity decreases from ~2.7 W m -1 K -1 for YbMg 2 Bi 1.96 to ~0.8 W m -1 K -1 for Yb 0.7 Mg 0.3 Mg 2 Bi 1.96 , a reduction of ~70%. Benefiting from the greatly reduced thermal conductivity, the average ZT has been effectively improved from ~0.46 for YbMg 2 Bi 1.96 to ~0.61 for Yb 0.8 Mg 0.2 Mg 2 Bi 1.96 , an enhancement of ~33%. In addition, the predicted maximum heat-to-electricity conversion efficiency can be increased from ~7% for YbMg 2 Bi 1.96 to ~10% for Yb 0.8 Mg 0.2 Mg 2 Bi 1.96 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Negative and zero thermal expansion in α-(Cu 2-x Znx)V 2 O 7 solid solutions

Negative or zero thermal expansion (NTE or ZTE) of materials is intriguing for controllable thermal expansion. In this work, we report a series of orthorhombic α-Cu 2- x Zn x V 2 O 7 ( x = 0, 0.1, 0.2), in which the volumetric coefficients of thermal expansion are successfully tuned from -10.19 × 10 -6 K -1 to -1.58 × 10 -6 K -1 in the temperature range of 100–475 K by increasing the content of Zn 2+ . It has been revealed that the transverse vibrations of oxygen bonded with vanadium are dominant in the contraction of the bc plane, leading to the overall volume NTE in α-Cu 2 V 2 O 7 . The introduction of Zn 2+ densifies the crystal structure, which is presumed to suppress the space of transverse vibrations and results in the ZTE in α-Cu 1.8 Zn 0.2 V 2 O 7 . This work presents an effective method to realize ZTE in anisotropic framework systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of Cu2Zn(GexSi1−x)Se4 solid solution: the kesterite to wurtz–kesterite structural phase transition

Developing low-cost, sustainable, and environmentally friendly top absorber layers for tandem solar cells is essential to advancing photovoltaic technologies and accelerating the transition to renewable energy. In this work, we explore the potential of tetravalent (Cu2Zn(GexSi1−x)Se4) cation mutations in chalcogenide compound semiconductors with the aim of finding a material with increased band gap and reduced structural disorder. A combination of high-resolution synchrotron powder diffraction and neutron powder diffraction was used to determine the atomic positions and monoclinic angles in monoclinic wurtz–kesterite type Cu2Zn(GexSi1−x)Se4 mixed crystals as well as to determine the cation distribution in the crystal structure of Ge-rich kesterite-type and Si-rich wurtz–kesterite type mixed crystals. These investigations enabled us to deduce the structural transition scenario within the Cu2Zn(GexSi1−x)Se4 series. The transition occurs via a region where two phases with different crystal structures, tetragonal and monoclinic and thus a different distortion of the coordination tetrahedra, but the same cation distribution within the element specific cation sites co-exist. Thus, the structural transition between the kesterite and the wurtz–kesterite structure within the Cu2Zn(GexSi1−x)Se4 series is a distortion driven transition. The study identifies cation mutation in quaternary chalcogenides as a promising strategy beyond chalcopyrites and kesterites for low cost and environmentally friendly top absorbers in tandem solar cells.

Gurieva, Galina [Helmholtz Center Berlin for Mater↗

Synthesis, crystal structure and physical properties of the solid solutions Ca 14– x RE x CdSb 11 ( RE = La–Nd, Sm, Gd–Yb, x ≈ 0.85±0.15)

This article presents new antimonides represented with the general formula Ca 14– x RE x CdSb 11 ( RE =La–Nd, Sm, Gd–Yb, x ≈ 0.85±0.15). The 12 studied compounds constitute a nearly complete series of rare-earth metal substituted variants of the ternary Ca 14 CdSb 11 phase. All have been synthesized from the respective elements, employing high-temperature reactions under molten flux conditions. The structures have been fully characterized by single-crystal X-ray diffraction methods. All materials crystallize in the tetragonal Ca 14 AlSb 11 structure type (space group I 4 1 / acd , No. 142, Z =8). Rare-earth element atoms randomly substitute Ca atoms on the four available crystallographic sites, with a noted preference for the Ca2 site in case of the light (La–Nd) rare-earth elements and the Ca1 site in case of the heavier (Sm, Gd–Yb) ones. The electronic structure calculations and resistivity measurements indicate title compounds as degenerated semiconductors. Magnetization measurements at varied temperature show Curie-Weiss paramagnetic behavior consistent with local-moment magnetism due to the 3+ ground state for the rare-earth metal ions. In the case of the Yb-containing sample, a mixed-valence Yb 2+/3+ state is apparent. Furthermore, the measured charge transport properties suggest small bandgap degenerate semiconductor-like behavior and suitability for thermoelectrics.

36 MATERIALS SCIENCE↗

Increased thermal conductivity and decreased electron–phonon coupling factor of the aluminum scandium intermetallic phase (Al 3 Sc) compared to solid solutions

Aluminum scandium alloys and their intermetallic phases have arisen as potential candidates for the next generation of electrical interconnects. Here, in this work, we measure the in-plane thermal conductivity and electron–phonon coupling factor of aluminum scandium alloy thin films deposited at different temperatures, where the temperature is used to control the grain size and volume fraction of the Al 3 Sc intermetallic phase. As the Al 3 Sc intermetallic formation increases with higher deposition temperature, we measure increasing in-plane thermal conductivity and a decrease in the electron–phonon coupling factor, which corresponds to an increase in grain size. Our findings demonstrate the role that chemical ordering from the formation of the intermetallic phase has on thermal transport.

Chemical elements↗

Delayed damage accumulation by athermal suppression of defect production in concentrated solid solution alloys

A combined experimental and computational evaluation of damage accumulation in ion-irradiated Ni, NiFe, and NiFeCoCr is presented. Furthermore, a suppressed damage accumulation, at early stages (low-fluence irradiation), is revealed in NiFeCoCr, with a linear dependence as a function of ion fluence, in sharp contrast with Ni and NiFe. This effect, observed at 16 K, is attributed to the complex energy landscape in these alloys that limits defect mobility and therefore enhances defect interaction and recombination. Our results, together with previous room-temperature and high-temperature investigations, suggest "self-healing" as an intrinsic property of complex alloys that is not a thermally activated process.

36 MATERIALS SCIENCE↗

Optical Absorption and Spectral Photoconductivity in α-(Fe 1-x Cr x ) 2 O 3 Solid-Solution Thin Films

Hematite, α-Fe 2 O 3 , is an attractive narrow gap oxide for consideration as an efficient visible light photocatalyst, with significant potential for band gap engineering via doping. We examine optical absorption in α (Fe 1-x Crx) 2 O 3 epitaxial films and explain the observed excitations, and the nature of the band gap dependence on x, through first principles calculations. The calculated and measured optical band gap becomes smaller than that of the bulk α-Fe 2 O 3 and reaches a minimum as the Cr mole fraction increases to 50%. The lowest energy transitions in the mixed-metal alloys involve electron excitation from occupied Cr 3d orbitals to unoccupied Fe 3d orbitals, and they result in a measureable photocurrent. The onset of α-Fe 2 O 3 photoconductivity can be reduced by nearly ~0.5 eV through addition of Cr.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of order-disorder transitions in multicomponent solid-solution alloys

In this paper, we will focus on the recent development of the order-disorder transition in metallic materials. The past decades have witnessed fast development in the first-principles methodologies and their applications to ordering transitions in multi-component alloys, particularly the high-entropy alloys. The driving force for the proceedings comes from (i) the advance of algorithms and increasingly cheaper hardware, and also (ii) the great passion to model alloys with increasing number of components.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗