Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shape analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Experimental and analytical determination of vibration characteristics of corrugated, flexibly supported, heat-shield panels

Experimental and analytical natural frequencies, nodal patterns, and typical modal displacements for a corrugated, flexibly supported, heat-shield panel are discussed. Good correlation was found between the experimental data and NASTRAN analytical results for the corrugated panel over a relatively wide frequency spectrum covered in the investigation. Of the two experimental techniques used for mode shape and displacement measurements (a noncontacting displacement sensor system and a holographic technique using a helium-neon, continuous-wave laser), the holographic technique was found, in the present investigation, to be faster and better suited for determining a large number of complex nodal patterns of the corrugated panel.

Carden, H. D.↗
NASA NTRS1979

Influence of interface on composite failure

The influence of the interface on the composite system behavior is investigated by analytical modeling. The stress analysis is based on the two-dimensional finite element procedure in which twelve-node isoparametric elements with cubic shape functions are used. The location of possible failure sites is predicted by the strain energy density (SED) failure theory which assumes failure to coincide with locations of minimum SED while the locations of maximum SED correspond to regions of excessive distortion or yielding. The results of the analysis show that the way in which the modulus of elasticity varies within the interface is as important in modeling as the average interface modulus.

Sih, G. C.↗
NASA NTRS1987

Evolution of interstellar pickup ions in the solar wind

A model is constructed for the evolution of an interstellar pickup ion distribution in the solar wind. The model assumes that the ions are immediately isotropized at ionization and follows the subsequent development of the distribution function as the particles are convected with the solar wind. The effects of energy diffusion in an ambient wave field with a power law spectrum, adiabatic deceleration in the expanding solar wind, and continual addition of newly ionized particles are all included in the model. An analytical expression describing the evolution of the distribution function in phase space velocity and heliocentric radius is obtained. The distribution quickly approaches an asymptotic shape in phase space which depends on the relative efficiency of the energy diffusion process compared to that of adiabatic deceleration. At large distances from the sun the density of pickup ions falls as 1/r in this model. An expression for the distribution function at large distances and for large particle speed is presented. The asymptotic shape should describe the distribution of pickup ions in the outer heliosphere and could be used as an input distribution for a model of the anomalous component of heliosphere and could be used as an input distribution for a model of the anomalous component of cosmic rays. Comparison of this work with the recent observation of He(+) at 1 AU implies that the energy diffusion process is very weak inside 1 AU.

Isenberg, Philip A.↗
NASA NTRS1991

A detailed numerical investigation of Burke-Schumann gaseous and spray flames

The classical Burke-Schumann gaseous diffusion flame, and the effect of introducing fuel in the form of liquid sprays are investigated numerically. The time-dependent two-dimensional, axisymmetric conservation equations are solved for the gas phase. A Lagrangian approach is used for the dispersed phase. The chemical reactions are modeled through the one-step global reaction scheme. The numerical results show that the computed flame structure is significantly different from that given by the analytical solution. The computed flame is about 15 percent longer and 5 percent narrower than the classical Burke-Schumann flame. The predicted flame shape is, however, in better agreement with experimental observations than the Burke-Schumann flame. The effects of introducing liquid sprays is found to produce thinner and longer flames than its counterpart gaseous flame. A detailed comparison of the structures of gaseous and spray flames is made, and the differences are discussed.

Mawid, M. A.↗
NASA NTRS1993

Pinching solutions of slender cylindrical jets

Simplified equations for slender jets are derived for a circular jet of one fluid flowing into an ambient second fluid, the flow being confined in a circular tank. Inviscid flows are studied which include both surface tension effects and Kelvin-Helmholtz instability. For slender jets a coupled nonlinear system of equations is found for the jet shape and the axial velocity jump across it. The equations can break down after a finite time and similarity solutions are constructed, and studied analytically and numerically. The break-ups found pertain to the jet pinching after a finite time, without violation of the slender jet ansatz. The system is conservative and admissible singular solutions are those which conserve the total energy, mass, and momentum. Such solutions are constructed analytically and numerically, and in the case of vortex sheets with no surface tension certain solutions are given in closed form.

Papageorgiou, Demetrios T.↗
NASA NTRS2011

Coordinated Analyses of Diverse Components in Whole Stardust Cometary Tracks

Analyses of samples returned from Comet 81P/Wild-2 by the Stardust spacecraft have resulted in a number of surprising findings that show the origins of comets are more complex than previously suspected. However, these samples pose new experimental challenges because they are diverse and suffered fragmentation, thermal alteration, and fine scale mixing with aerogel. Questions remain about the nature of Wild-2 materials, such as the abundances of organic matter, crystalline materials, and presolar grains. To overcome these challenges, we have developed new sample preparation and analytical techniques tailored for entire aerogel tracks. We have successfully ultramicrotomed entire "carrot" and "bulbous" type tracks along their axis while preserving their original shapes. This innovation allowed us to examine the distribution of fragments along the track from the entrance hole all the way to the terminal particle (TP). We will present results of our coordinated analysis of the "carrot" type aerogel tracks #112 and #148, and the "bulbous" type aerogel tracks #113, #147 and #168 from the nanometer to the millimeter scale. Scanning TEM (STEM) was used for elemental and detailed mineralogy characterization, NanoSIMS was used for isotopic analyses, and ultrafast two-step laser mass spectrometry (ultra L2MS) was used to investigate the nature and distribution of organic phases. The isotopic measurements were performed following detailed TEM characterization for coordinated mineralogy. This approach also enabled spatially resolving the target sample from fine-scale mixtures of compressed aerogel and melt. Eight of the TPs of track #113 are dominated by coarse-grained enstatite (En90) that is largely orthoenstatite with minor, isolated clinoenstatite lamellae. One TP contains minor forsterite (Fo88) and small inclusions of diopside with % levels of Al, Cr and Fe. Two of the TPs contain angular regions of fine-grained nepheline surrounded by enstatite. Their O isotopic compositions are in the range of meteoritic materials, implying that they originated in the inner Solar System. Complex aromatic hydrocarbons are distributed along aerogel tracks and in TPs. These organics are likely cometary but were affected by shock heating. Three TPs of track #147 and two of track 168 have completely different mineralogy. TP2 of track #147 entirely consists of Fe-Ni alloy (5 at% Ni) and TP3 contains Fa28 with partial olivine-pyroxene intergrowth and minor albite. TP4 contains pentlandite, Fe-olivine, albite and high Ca pyroxene with Na and Cr (kosmochlor component). TP1 of #168 contains Fe-olivine, albite and pentlandite, and the concentric TP2 has a core of olivine grains with co-existing indigenous amorphous SiO2 surrounded by a carbon mantle, which in turn is surrounded by a layer of compressed aerogel. The TP of the carrot track #112 is a (16)O-rich forsteritic olivine grain that likely formed in the inner Solar System. The track also contains submicron-sized diamond grains of likely Solar System origin.

Nakamura-Messenger, Keiko↗
DOE OSTI2026

Governing in Time: Temporal Capacity and the Feasibility of Energy Transitions

Energy systems function as both technological systems and temporal institutions that shape how societies coordinate, justify, and support collective choices over time. This paper introduces the concept of governance horizons to explain why energy transitions can remain morally supported yet become institutionally weak under increasing pressure. We argue that governability depends on institutions' capacity to synchronize across multiple timeframes - aligning short-term decisions with intermediate coordination and long-term commitments. When this synchronization fails, transitions struggle not because their goals are dismissed, but because governance lacks sufficient time to justify, coordinate, and uphold decisions. Comparative analysis of San Antonio, Texas, and Interior Alaska reveals how energy system pressures generate distinct temporal configurations: San Antonio exhibits governance horizon stretching, where institutions must simultaneously meet near-term reliability demands and long-term transformation goals, while Interior Alaska exhibits horizon compression, where extreme environmental constraints force decision-making into short stabilization cycles. In both contexts, public support for sustainability goals coexists with institutional strain because evaluative judgments are unevenly distributed over time. A temporal configuration analysis is introduced as a diagnostic analytic stance for identifying these patterns. By treating temporal alignment as an explanatory variable rather than a background condition, this approach clarifies how feasibility, sequencing, and legitimacy are shaped by constraints on institutional time. The analysis demonstrates that successful energy transitions depend not only on technological innovation or institutional support, but on governance systems’ ability to sustain credible coordination across multiple time horizons.

Comparative case study↗
NASA NTRS1992

Improving the efficiency of aerodynamic shape optimization procedures

The computational efficiency of an aerodynamic shape optimization procedure which is based on discrete sensitivity analysis is increased through the implementation of two improvements. The first improvement involves replacing a grid point-based approach for surface representation with a Bezier-Bernstein polynomial parameterization of the surface. Explicit analytical expressions for the grid sensitivity terms are developed for both approaches. The second improvement proposes the use of Newton's method in lieu of an alternating direction implicit (ADI) methodology to calculate the highly converged flow solutions which are required to compute the sensitivity coefficients. The modified design procedure is demonstrated by optimizing the shape of an internal-external nozzle configuration. A substantial factor of 8 decrease in computational time for the optimization process was achieved by implementing both of the design improvements.

Burgreen, Greg W.↗
NASA NTRSDate not supplied

Diffraction by Sharp Edges of Noncanonical Shape with Mean Flow and Surface Impedance

This paper presents a study on diffraction by sharp edges of noncanonical edge shape in the presence of mean flow and surface impedance, which are important features for aircraft noise but have not been accounted for in previous studies on sharp-edge diffraction. An analytical formula for the diffracted pressure is derived by applying asymptotic analysis to the integral representation of the total pressure scattered by a geometry that contains sharp edges. The asymptotic analysis is presented as a systematic process that can be carried out to any order, if needed. An illustration is given to use a higher-order result to eliminate the singularity in the first-order result to make the solution regular in the entire parameter domain. The formula for the diffracted pressure is validated by experimental data and is applied to parametric studies to reveal the effects of noncanonical edge shape, mean flow and surface impedance, as well as the impact of these effects on the total scattered pressure in the presence of other scattering components.

Yueping Guo↗
NASA NTRS2004

Analytical Solution for the Critical Velocity of Pushing/Engulfment Transition

The distribution of ceramic particles in a metal matrix composite material depends primarily on the interaction of the particles with the solid/liquid interface during the solidification process. A numerical model that describes the evolution of the shape of the solid/liquid interface in the proximity of a foreign particle will presented in this paper. The model accounts for the influence of the temperature gradient and the Gibbs-Thomson and disjoining pressure effects. It shows that for the systems characterized by k(sub p) < k(sub L) the disjoining pressure causes the interface curvature to change its sign in the close-contact particle/interface region. It also shows that the increase of the temperature gradient diminishes the effect of the disjoining pressure. The analysis of the numerical results obtained for a large range of processing conditions and materials parameters has led to the development of an analytical solution for the critical velocity of pushing/engulfinent transition. The theoretical results will be discussed and compared with the experimental measurements performed under microgravity conditions.

Catalina, Adrian V.↗
NASA NTRS2003

Experimental and Analytical Studies of Smart Morphing Structures Being Conducted

The development of morphing aeropropulsion structural components offers the potential to significantly improve the performance of existing aircraft engines through the introduction of new inherent capabilities for shape control, vibration damping, noise reduction, health monitoring, and flow manipulation. One of the key factors in the successful development of morphing structures is the maturation of smart materials technologies.

Lee, Ho-Jun↗
DOE OSTI2023

Maximum entropy distributions of dark matter in ΛCDM cosmology

Context. Small-scale challenges to ΛCDM cosmology require a deeper understanding of dark matter physics. Aims. This paper aims to develop the maximum entropy distributions for dark matter particle velocity (denoted by X ), speed (denoted by Z ), and energy (denoted by E ) that are especially relevant on small scales where system approaches full virialization. Methods. For systems involving long-range interactions, a spectrum of halos of different sizes is required to form to maximize system entropy. While the velocity in halos can be Gaussian, the velocity distribution throughout the entire system, involving all halos of different sizes, is non-Gaussian. With the virial theorem for mechanical equilibrium, we applied the maximum entropy principle to the statistical equilibrium of entire system, such that the maximum entropy distribution of velocity (the X distribution) could be analytically derived. The halo mass function was not required in this formulation, but it did indeed result from the maximum entropy. Results. The predicted X distribution involves a shape parameter α and a velocity scale, v 0 . The shape parameter α reflects the nature of force ( α → 0 for long-range force or α → ∞ for short-range force). Therefore, the distribution approaches Laplacian with α → 0 and Gaussian with α → ∞. For an intermediate value of α , the distribution naturally exhibits a Gaussian core for v ≪ v 0 and exponential wings for v ≫ v 0 , as confirmed by N -body simulations. From this distribution, the mean particle energy of all dark matter particles with a given speed, v , follows a parabolic scaling for low speeds (∝ v 2 for v ≪ v 0 in halo core region, i.e., “Newtonian”) and a linear scaling for high speeds (∝ v for v ≫ v 0 in halo outskirt, i.e., exhibiting “non-Newtonian” behavior due to long-range gravity). We compared our results against N -body simulations and found a good agreement.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1993

Analytical evaluation of a surface integral expressing the coupling between interior and exterior volumes in a FE-IE approach

Recently an approach which combines the finite element technique and an integral equation to determine the fields scattered by inhomogeneous bodies of complicated shape has been proposed. Basically, a mathematical surface which encloses the scatterers is introduced, thus dividing the space into an interior and an exterior volume, in which the finite element technique and an integral equation for EM scattering, respectively, are applied. The integral equation is set up for the tangential components of the fields at the surface, while the interior volume the unknowns are the total fields. Continuity of the tangential fields at the boundary, as required by Maxwell's equations, is imposed, thus coupling the two methods to obtain a consistent solution. The coupling term is expressed by a surface integral formed by the dot product of a FE basis function and an IE testing function, or viceversa. By choosing the boundary to be a surface of revolution and by making a convenient selection of IE basis (testing) functions, it is possible to evaluate the integrals analytically on surfaces such as curved triangles, curved quadrilaterals and curved pentagons. We will illustrate the salient steps involved in setting up and carrying out these integrals and discuss what class of basis (testing) functions and analytic surfaces of revolution they are applicable to. Analytic calculations offer the advantage of better accuracy than purely numerical ones, and, when combined with them, often shed light on issues of numerical convergence and limiting values. Furthermore, they may reduce computation time and storage requirements.

Zuffada, C.↗
DOE OSTI2020

Probability Density Function Control for Stochastic Nonlinear Systems using Monte Carlo Simulation

This paper presents a fast implementation framework of output probability density function (PDF) control for a class of stochastic nonlinear systems which are subjected to non-Gaussian noises. The statistical properties of the system outputs can be adjusted by shaping the dynamic output probability density function to track the reference stochastic distribution. However, the dynamic probability density function evolution is very difficult to obtain analytically even if the system model and the stochastic distributions of the noises are known. Motivated by Monte Carlo simulation, the dynamic probability density function can be estimated by sampling data which forms the contribution of this paper. In particular, the sampling points are generated following the stochastic distribution of the noise for each instant. These points go through the system would generate the histogram for system outputs, then the dynamic model can be established based on the dynamic histogram which reflects the randomness and the nonlinear dynamics of the investigated system. Based on the established model, the output probability density function tracking can be achieved and the simulation results and discussions show the effectiveness and benefits of the presented framework.

Zhang, Qichun↗
DOE OSTI2025

Physics-driven Explosions of Stripped High-mass Stars: Synthetic Light Curves and Spectra of Stripped-envelope Supernovae with Broad Light Curves

Stripped-envelope supernovae (SESNe) represent a significant fraction of core-collapse supernovae, arising from massive stars that have shed their hydrogen and, in some cases, helium envelopes. The origins and explosion mechanisms of SESNe remain a topic of active investigation. In this work, we employ radiative-transfer simulations to model the light curves and spectra of a set of explosions of single, solar-metallicity, massive Wolf–Rayet stars with ejecta masses ranging from 4 to 11 M ⊙ , which were computed from a turbulence-aided and neutrino-driven explosion mechanism. We analyze these synthetic observables to explore the impact of varying ejecta mass and helium content on observable features. We find that the light curve shape of these progenitors with high ejecta masses is consistent with observed SESNe with broad light curves but not the peak luminosities. The commonly used analytic formula based on rising bolometric light curves overestimates the ejecta mass of these high-initial-mass progenitor explosions by a factor of up to 2.6. In contrast, the calibrated method by Haynie et al., which relies on late-time decay tails, reduces uncertainties to an average of 20% within the calibrated ejecta mass range. Spectroscopically, the He I 1.083 μm line remains prominent even in models with as little as 0.02 M ⊙ of helium. However, the strength of the optical He I lines is not directly proportional to the helium mass but instead depends on a complex interplay of factors such as the 56 Ni distribution, composition, and radiation field. Thus, producing realistic helium features requires detailed radiative transfer simulations for each new hydrodynamic model.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1978

Spectral line shapes in spherically symmetric radially moving clouds

We present a method for the analysis of spectral line shapes arising in homogeneous, moving gas clouds in which velocity and molecular line excitation have power-law dependences on radial distance from the center. Analytical expressions are obtained for radial flows, for both optically thick and optically thin lines. The additional case of an optically thick line from a differentially rotating cloud is considered qualitatively. The method is applied to the interpretation of the C(12)O line observed in the direction of the Kleinmann-Low infrared nebula in Orion. While gravitational collapse and accelerated outflows would produce lines qualitatively similar to the observed profile, it does not appear to be possible to fit either model to the observations in detail.

Kuiper, T. B. H.↗
NASA NTRS1980

Optical phase distortion due to compressible flow over laser turrets

Analytical models for optical phase distortion due to compressible flow over a laser turret are developed. Phase distortion is calculated for both blunt and small perturbation turrets. For the blunt turret, the Janzen-Rayleigh technique is used to determine the flow field. Phase distortions of 2.2 wavelengths at 3.8 microns are calculated for the blunt turret. For small perturbation turrets, a versatile analytical model is developed for a turret on a fuselage with circular cross section. With a two dimensional Fourier series representation of the turret, any shape can be considered. Both subsonic and supersonic flows can be calculated. Phase distortions of 1.2 wavelengths at 3.8 microns are calculated for one turret at high subsonic Mach number. In addition to being of value for laser turrets, the methods are applicable to reconnaissance aircraft using photographic equipment and cruise missiles using celestial navigation.

Fuhs, A. E.↗
NASA NTRS1985

Two-dimensional modelling of compressive failure in delaminated laminates

An analytical model is developed to assess the compressive strength criticality of near-surface interlaminar defects in laminated composites. The delaminated region is elliptic in shape, separating a thick isotropic plate from a thin orthotropic layer whose material axes coincide with the ellipse axes. The growth conditions and growth behavior of this defect are studied by breaking the overall problem into an elastic stability problem and a fracture problem. Post-buckling solution for the elliptic section is obtained using the Rayleigh-Ritz method while an energy balance criterion based on a self-similar disbond growth governs the fracture. The parameters controlling the growth or arrest of the delamination damage are identified as the fracture energy, disbond depth and elastic properties of the materials from both sides of the delaminating interface. By varying the degree of material anisotropy relative to the loading axis a range in growth behavior was found including stable or unstable crack growth parallel to or normal to the loading axis.

Chai, H.↗