Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Development of the Two Phase Flow Separator Experiment for a Reduced Gravity Aircraft Flight

The recent hardware development and testing of a reduced gravity aircraft flight experiment has provided valuable insights for the future design of the Two Phase Flow Separator Experiment (TPFSE). The TPFSE is scheduled to fly within the Fluids Integration Rack (FIR) aboard the International Space Station (ISS) in 2020. The TPFSE studies the operational limits of gas and liquid separation of passive cyclonic separators. A passive cyclonic separator utilizes only the inertia of the incoming flow to accomplish the liquid-gas separation. Efficient phase separation is critical for environmental control and life support systems, such as recovery of clean water from bioreactors, for long duration human spaceflight missions. The final low gravity aircraft flight took place in December 2015 aboard NASA's C9 airplane.

fluid mechanics↗

Simulation Evaluations of an Autonomous Urban Air Mobility Network Management and Separation Service

This paper presents an initial implementation of an autonomous Urban Air Mobility network management and aircraft separation service for urban airspace that does 1) departure and arrival scheduling across the network, 2) continuous trajectory management to ensure safe separation between aircraft, and 3) seamless integration with traditional operations. The highly-autonomous AutoResolver algorithm developed for traditional aviation was extended to provide these capabilities. An evaluation of this initial implementation was conducted in fast-time simulations using a dense, two-hour traffic scenario with Urban Air Mobility aircraft flying between a network of 20 vertiports in the Dallas-Fort Worth metroplex. When the spatial separation was reduced from 0:3nmi to 0:1nmi, the total de- lay decreased by 7:3%; when the temporal separation was reduced from 60s to 45s, the total delay decreased by 28:4%. The total number of conflict resolutions decreased by 26% and 17%, respectively. Furthermore, when a scheduling horizon greater than the duration of UAM flights was used (50min), most conflicts were resolved pre-departure producing ground delay. By comparison, when a shorter scheduling horizon was used (8min), most conflicts were resolved post-departure generating airborne delay. For all scheduling and separation constraints tested, AutoResolver prevented loss of separation from occurring. Urban Air Mobility operations have the ability to revolutionize how people and goods are transported and this paper presents initial research focusing on the high levels of autonomy required for an airspace system capable of scaling to handle significantly higher densities of aircraft.

Bosson, Christabelle S.↗

Effects of Autonomous sUAS Separation Methods on Subjective Workload, Situation Awareness, and Trust

The Unmanned Aircraft System (UAS) Traffic Management (UTM) concept was designed to support autonomous small UAS operations at a large-scale and without direct human intervention. However, human-autonomy interactions will be impacted by situation awareness, workload, and trust in the autonomy. Method: Nine participants monitored live small UAS operations in a representative UTM system during a series of traffic conflict scenarios and then provided subjective responses regarding situation awareness, workload, and trust in the autonomous separation method. The study employed a 3 (Separation Method: Autonomous Sense and Avoid, Geofence, Manual) × 2 (Incursion: High, Medium) within subjects design. Results: Situation awareness ratings for both autonomous separation methods were significantly lower than the manual condition. An interaction indicated differential workload ratings for the Autonomous Sense and Avoid separation ratings. Trust ratings significantly dropped when the Geofencing separation method failed. Conclusion: Subjective responses of remote operators in the UTM system are affected by the vehicle separation methods. Operators’ understanding of decisions made by the autonomous systems onboard the vehicle likely influence this effect

UAS↗

Charge Separation for Muon Collider Cooling

Most schemes for six dimensional muon ionization cooling work for only one sign. It is then necessary to have charge separation prior to that cooling. Schemes of charge separation using bent solenoids are described, and their simulated performances reported. It is found that for efficient separation, it should take place at somewhat higher momenta than commonly used for the cooling. Charge separation using bent solenoids can be effective if carefully designed. Bent solenoids can generate dispersion from 'momentum drift', but can spoil emittance from 'amplitude drift'. Abrupt entry into a bent solenoid causes emittance growth, but matching using integral {lambda} lengths, or Norem's method, corrects this problem. Reverse bending removes the dispersion and reduces 'amplitude drift', but only if there is no rf until after all bending. The main problem is bunch lengthening and distortion from the long transports without rf. At 230 MeV/c, even with a higher field of 3 T, non-linearities increase the 6D emittance by 117% and give 13% loss, which is not acceptable. Raising the momentum from 230 to 300 MeV gives a 6D emittance growth of 38% and the loss 5%, which may be acceptable. Raising the momentum further to 400 MeV/c gives very good results: 6D growth of 24% and 2.5% loss. Further optimization should include the acceleration to the higher momenta prior to the separation, and the higher momentum cooling immediately after it. The longitudinal phase space prior to the separation should be rotated to minimize the total bunch lengthening.

43 PARTICLE ACCELERATORS↗

Phase-separated, epitaxial composite cap layers for electronic device applications and method of making the same

An electronic component that includes a substrate and a phase-separated layer supported on the substrate and a method of forming the same are disclosed. The phase-separated layer includes a first phase comprising lanthanum manganate (LMO) and a second phase selected from a metal oxide (MO), metal nitride (MN), a metal (Me), and combinations thereof. The phase-separated material can be an epitaxial layer and an upper surface of the phase-separated layer can include interfaces between the first phase and the second phase. The phase-separated layer can be supported on a buffer layer comprising a composition selected from the group consisting of IBAD MgO, LMO/IBAD-MgO, homoepi-IBAD MgO and LMO/homoepi-MgO. The electronic component can also include an electronically active layer supported on the phase-separated layer. The electronically active layer can be a superconducting material, a ferroelectric material, a multiferroic material, a magnetic material, a photovoltaic material, an electrical storage material, and a semiconductor material.

36 MATERIALS SCIENCE↗

An advanced hybrid reprocessing system based on UF{sub 6} volatilization and chromatographic separation

To recover U, Pu, MA (Np, Am, Cm) and some specific fission products FPs (Cs, Sr, Tc, etc.) from various spent nuclear fuels (LWR/FBR: Oxide, Metal Fuels), we are studying an advanced hybrid reprocessing system based on UF6 volatilization (Pyro) and chromatographic separation (Aqueous). Spent fuels are de-cladded by means of thermal and mechanical methods and then applied to the fluorination/volatilization process, which selectively recovers the most amount of U. Then, the remained fuel components are converted to oxides and dissolved by HNO{sub 3} solution. Compared to U, since Pu, MA and FPs are significantly less abundant in spent fuels, the scale of the aqueous separation process could become reasonably small and result in less waste. For the chromatographic separation processes, we have prepared different types of porous silica-based organic/inorganic adsorbents with fast diffusion kinetics, improved chemical stability and low pressure drop in a packed column. So they are advantageously applicable to efficient separation of the actinides and FP elements from the fuel dissolved solution. In this work, adsorption and separation behavior of representative actinides and FP elements was studied. Small scale separation tests using simulated and genuine fuel dissolved solutions were carried out to verify the feasibility of the proposed process. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Facile Separation of Sr-90, Fe-55, Nb-94, Ni-59,63 with Large Amount of Ca by Controlled pH Precipitation - 17190

it is important to manage low-and intermediate-level radioactive wastes from nuclear power plants due to a permanent disposal. According to the Nuclear Safety and Security Commission (NSSC), among all the regulatory radionuclides, a few radionuclides from the fission products and corrosion products such as Sr-90, Fe-55, Nb-94, Ni-59,63 which emit low-energy x-ray and beta radiation. Thus, it is necessary to separate beta-emitting nuclides individually. For that reason, KAERI has established analytical procedures which can separate Sr-90, Fe-55, Nb-94, Ni-59,63 from radioactive waste samples. However, when radioactive wastes contain large amount of Ca (above 300 mg), it is not easy to recover the target radionuclides because high concentration of Ca has a strong influence on the effective analyses. In order to combat this problem, there was an attempt to make the precipitate as CaF{sub 2} by using hydrofluoric acid. However, this way had a limitation; Fe-55, Nb-94 were precipitated as fluoride compounds as well as Ca. In this study, we have focused on developing a separation procedure stage by stage in the radioactive wastes with Sr-90, Fe-55, Nb-94, Ni-59,63 and large amount of Ca (1500 mg). The detailed steps are described below; (1) Separation of Fe-55, Nb-94, Ni-59,63 as metal hydroxide precipitates: low solubility product constant (Ksp) between pH 6 and pH 10. (2) Selective elimination of Ca-oxalate complex under strong acidic conditions. Consequently, all the metal sources were sequentially separated and quantitatively recovered by inductively coupled plasma atomic emission spectrometric (ICP-AES) analysis, the recovery is as follows; Sr-90 (3 mg): 89.47±5.48%, Fe-55 (20 mg): 99.80±3.19%, Nb-94 (20 mg): 97.45±2.42%, Ni-59,63 (2 mg): 83.59±15.31%, Ca (1500 mg): 85.32±6.38%, respectively. This methodology will help us separation of radioactive wastes efficiently if apply properly. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Revisit of Phase Separation of Borosilicate Glass for Vitrification of High Level Radioactive Waste - 19166

Phase separation of glasses for vitrification of high level radioactive waste has been experimentally studied to know uncertainty of the phase separation conditions; temperature and glass compositions as well as to propose possibility of recycling of heavy metals on a longer time scale. Our current results at 700 and 750 deg. C for ternary borosilicate glass system showed that the phase separation region at 700 deg. C spreads along with a direction of increasing Na{sub 2}O composition when compared with the data in literature. On the other hand, at the glass composition employed in the reprocessing plant in Japan, no segregation was observed. Concerning the application of phase separation phenomena, we had previously reported recovery of almost all elements from the vitrified borosilicate glass containing simulated fission products through phase separation of the borosilicate glass and this suggests that we could propose that after vitrification of high-level radioactive waste heavy metals may be retrieved as energy or materials resources when they are required to utilize on a longer time scale. From this standpoint, phase separation of lead borosilicate glass was also studied to seek economical and versatile recycling. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The Flow Visualization for the Separation of Air-water Bubbly Two-phase Flow Through a Vertical T-junction

T-junction is a typical structure in many industrial systems such as power plants, chemical process, and hydrocarbon production industries. The separation of two-phase flow passing through T-junction is a common flow phenomenon. There are lots of investigations regarding two-phase flow separation in branching tees and wyes tees. The characteristic of the two-phase flow between the two outlets are always non-uniform, and this kind of fluid status may contribute to the unpredictable damage of downstream facilities. For the nuclear power plants, severe accidents analysis is important especially for Light-Water Reactors (LWR) when Loss of Coolant Accident (LOCA) occurs. The small break of the pipe may cause the coolant become two-phase flow due to the pressure drop. Under certain conditions, the behavior of T-junction is similar to a gas-liquid separator, as a result of the gas enters the side arm and the liquid flows straight along the run arm. The partial separation of gas-liquid mixtures can reduce the load on the main separator, probably leading to smaller units. The study aims to establish complete visual observations for the benchmark of Computational Fluid Dynamics (CFD) model. As a consequence, a vertical T-junction (D = 26 mm) experimental loop was set up for the purpose of elaborating the complex two-phase fluid phenomena. In this experiment, variables were manipulated under highly controlled conditions and a photographic method was proposed to analyze the images of phase separation. Furthermore, the images obtained by camera have been discussed to receive valuable information about the two phase flow behavior around the T-junction.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Simulation studies for beam commissioning at FRIB Advanced Rare Isotope Separator

The Facility for Rare Isotope Beams (FRIB) includes a powerful superconducting driver accelerator and an Advanced Rare Isotope Separator (ARIS). The ARIS collects and purifies the rare isotope fragments of interest for experiments in nuclear physics, nuclear astrophysics, fundamental symmetries, etc. ARIS consists of a vertical pre-separator and downstream horizontal separator section (C-Bend). Each section can provide a high-resolution separation alternatively. The resolution reduction due to the emittance induced by momentum compression can be avoided by isotope separation in different dispersive planes. Beam commissioning of ARIS for the first experiments was completed and demonstrated particle identification of fragments. The beam tuning in ARIS largely relies on numerical simulations since the limited space for diagnostics. Here, we report the result of the beam trajectory correction, transverse matching, and beam-based misalignment studies at ARIS.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Isotopic Effect on Ion Mobility and Separation of Isotopomers by High-Field Ion Mobility Spectrometry

Since early 1900-s, when vacuum techniques and ion detectors first enabled investigations of gas-phase ions, two approaches to their separation and characterization have emerged - mass spectrometry (MS) and ion mobility spectrometry (IMS).1,2 Though both exploit that distinct charged species move in electric fields differently, MS is performed in vacuum and is based only on the ion mass/charge (m/q) ratio while IMS involves sufficiently dense buffer gases and relies on ion transport properties. The first major discovery enabled by MS was the existence of isotopes by Thomson and Aston,3 and isotopic analyses have since been integral to MS. In particular, the preparative separation of U isotopes using Lawrence’s Calutron was the first industrial application of MS,4 and isotopic labeling is key to MS quantification methods. With IMS, the issue of isotopes was largely ignored as the resolving power (R) was generally too low for their separation. Here, we demonstrate that recently developed high-resolution differential IMS can separate isotopic molecular ions, including nominal isobars with different isotopic content and isotopomers. This capability may enable a new method for isotope separation in a small-scale format at ambient pressure and aid localization of labeled sites in various molecules. Perhaps most importantly, the isotopic shifts depend on the labeled atom position and thus may contain the kind of detailed structural information that is available in solution or solid state using tools such as NMR but has not generally been obtainable for gas-phase ions.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Adaptive Pore Opening to Form Tailored Adsorption Sites in a Cooperatively Flexible Framework Enables Record Inverse Propane/Propylene Separation

A proposed low-energy alternative to the separation of alkanes from alkenes by energy-intensive cryogenic distillation is separation by porous adsorbents. Unfortunately, most adsorbents preferentially take up the desired, high-value major component alkene, requiring frequent regeneration. Adsorbents with inverse selectivity for the minor component alkane would enable the direct production of purified, reagent-grade alkene, greatly reducing global energy consumption. However, such materials are exceedingly rare, especially for propane/propylene separation. Here, we report that through adaptive and spontaneous pore size and shape adaptation to optimize an ensemble of weak noncovalent interactions, the structurally responsive metal-organic framework CdIF-13 (sod-Cd(benzimidazolate) 2 ) exhibits inverse selectivity for propane over propylene with record-setting separation performance under industrially relevant temperature, pressure, and mixture conditions. Powder synchrotron X-ray diffraction measurements combined with first-principles calculations yield atomic-scale insight and reveal the induced fit mechanism of adsorbate-specific pore adaptation and ensemble interactions between ligands and adsorbates. Dynamic column breakthrough measurements confirm that CdIF-13 displays selectivity under mixed-component conditions of varying ratios, with a record measured selectivity factor of α ≈ 3 at 95:5 propylene:propane at 298 K and 1 bar. When sequenced with a low-cost rigid adsorbent, we demonstrated the direct purification of propylene under ambient conditions. In conclusion, this combined atomic-level structural characterization and performance testing firmly establishes how cooperatively flexible materials can be capable of unprecedented separation factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Benchmarking Hydrogen Isotope Separation Efficiency of Pd/k–Packed TCAP Columns

By leveraging the large isotope effect in the palladium hydrogen isotope system, the Thermal Cycling Absorption Process (TCAP) provides an efficient and advantageous means to separate protium, deuterium, and tritium. To meet increased future tritium processing demands, such as those needed for fusion power plants, current designs of the separation columns need to be adapted and optimized using the progress made in understanding hydrogen isotope science. One key to this optimization lies in understanding the baseline performance for currently employed separation packing materials. Pd/k and molecular sieves, as commonly used for the separation of hydrogen isotopes, are herein evaluated to establish a baseline for their separation efficiency. Van Deemter plots are formulated, and the influence of each parameter is evaluated to determine areas for improvement.

Thermal Cycling Absorption Process (TCAP)↗

Development of the Actinide-Lanthanide Separation (ALSEP) Process

Separating the minor actinide elements (Am and Cm) from acidic high-level raffinates arising from the reprocessing of irradiated nuclear fuel is an important step in closing the nuclear fuel cycle. Most proposed approaches to this problem involve two solvent extraction steps: 1) co-extraction of the trivalent lanthanides and actinides, followed by 2) separation of the actinides from the lanthanides. The objective of our work is to develop a single solvent-extraction process for isolating the minor actinide elements. We report here a solvent containing N,N,N',N'-tetra(2 ethylhexyl)diglycolamide (T2EHDGA) combined with 2-ethylhexylphosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) that can be used to separate the minor actinides in a single solvent-extraction process. T2EHDGA serves to co-extract the trivalent actinide and lanthanide ions from nitric acid solution. Switching the aqueous phase chemistry to a citrate buffered solution of N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid at pH 2.5 to 4 results in selective transfer of the actinides to the aqueous phase, thus affecting separation of the actinides from the lanthanides. Separation factors between the lanthanides and actinides are approximately 20 in the pH range of 3 to 4, and the distribution ratios are not highly dependent on the pH in this system.

actinide separation↗

Preliminary Analysis of Separation Standards for Urban Air Mobility using Unmitigated Fast-Time Simulation

This research provides a preliminary analysis of various separation standards for Urban Air Mobility (UAM) operations. This study focuses on understanding and analyzing potential conflicts between UAM flights and conflicts between UAM and conventional aircraft. Fast-time simulations are conducted with a projected high-density of UAM traffic scenario and historical conventional non-UAM traffic flying under Instrument Flight Rules (IFR) or Visual Flight Rules (VFR) in Dallas Fort Worth (DFW) airspace. The conflicts are analyzed by examining losses of separation and near mid-air collisions of UAM flights and unmitigated risk of collision. A set of varied separation standards are used to investigate the impact of the new UAM operations on safety. The preliminary conflict analysis results will help inform separation standards development and in airspace and route design activities for future UAM operations.

Urban air mobility↗

Tailorable Multi–Modular Pore–Space–Partitioned Vanadium Metal–Organic Frameworks for Gas Separation

Currently, few porous vanadium metal-organic frameworks (V-MOFs) are known and even fewer are obtainable as single crystals, resulting in limited information on their structures and properties. Here this work demonstrates remarkable promise of V-MOFs by presenting an extensible family of V-MOFs with tailorable pore geometry and properties. The synthesis leverages inter-modular synergy on a tri-modular pore-partitioned platform. New V-MOFs show a broad range of structural features and sorption properties suitable for gas storage and separation applications for C 2 H 2 /CO 2 , C 2 H 6 /C 2 H 4 , and C 3 H 8 /C 3 H 6 . The c/a ratio of the hexagonal cell, a measure of pore shape, is tunable from 0.612 to 1.258. Other tunable properties include pore size from 5.0 to 10.9 Å and surface area from 820 to 2964 m 2 g –1 . With C 2 H 2 /CO 2 selectivity from 3.3 to 11 and high uptake capacity for C 2 H 2 from 65.2 to 182 cm 3 g –1 (298K, 1 bar), an efficient separation is confirmed by breakthrough experiments. The near-record high uptake for C 2 H 6 (166.8 cm 3 g –1 ) contributes to the promise for C 2 H 6 -selective separation of C 2 H 6 /C 2 H 4 . The multi-module pore expansion enables transition from C 3 H 6 -selective to more desirable C 3 H 8 -selective separation with extraordinarily high C 3 H 8 uptake (254.9 cm 3 g –1 ) and high separation potential (1.25 mmol g –1 ) for C 3 H 8 /C 3 H 6 (50:50 v/v) mixture.

36 MATERIALS SCIENCE↗

Integrated Bare Narrow Capillary-Hydrodynamic Chromatographic System for Free-Solution DNA Separation at the Single-Molecule Level

We have recently introduced a new technique, Bare Narrow Capillary Hydrodynamic Chromatography (BaNC–HDC), to resolve DNA without sieving matrices. In this technique, the separation capillaries had a diameter usually from a few hundred nanometers to a few micrometers. While high resolutions were obtained (especially for large DNA fragments), the sample injection and DNA elution were tedious, and the separation results (peak areas) were not reproducible. This was caused by the extremely low injection volumes (a few picoliters) and elution rates (<1 nanoliter per minute), which prevented us from utilizing reliable injection valves and commercial high performance liquid chromatographic pumps. In this work, we incorporate a microfabricated chip injector, and a high-pressure electroosmotic pump (EOP) to address these issues. The chip injector allows us to reliably and reproducibly inject low volumes (as low as ~1 pL) of samples into the narrow separation capillary, while the EOP provides flow rates and pressures perfectly suited for BaNC–HDC separations. Using the above system, we resolve kilo base-pair DNA fragments rapidly (in a few min) with high resolutions, and the limit of detection for double stranded DNA reaches a few molecules. The experimental parameters affecting resolutions are also discussed. Incorporation of a chip injection scheme makes automating BaNC–HDC separations readily achievable.

59 BASIC BIOLOGICAL SCIENCES↗

Pore Aperture Control Toward Size‐Exclusion‐Based Hydrocarbon Separations

Metal–organic frameworks (MOFs) have been proposed as a promising material for non-thermal chemical separations owing to their high structural diversity and tunability. Here, we report the synthesis of a zinc-based MOF containing a three-dimensional (3D) linker, bicyclo[2.2.2]octane-1,4-dicarboxylic acid, with high thermal stability towards the separation of hexane isomers. The incorporation of the 3D linker enhances the structural stability and provides well-defined pore apertures/channels with sub-Ångstrom precision. This precision allowed for the separation of similarly sized hexane isomers based on subtle differences in their kinetic diameters. Multi-component liquid phase batch experiments confirmed the separation of hexanes mixture into linear, monobranched, and dibranched isomers. This work represents a significant milestone in the construction of stable Zn-based MOFs and the incorporation of 3D linkers as a potential solution to challenging separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗