Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “seeding”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Plasma-Assisted Epitaxy of Piezoelectric Sc x Al 1-x N Films on Sapphire for Use in Harsh-Environment Microwave Acoustic Sensors

The Sc x Al 1-x N wurtzite structure has been shown theoretically and experimentally to exhibit significantly higher piezoelectric coupling compared to pure AlN. In this work, a plasma-assisted epitaxial growth method has been used to synthesize epitaxial (0002) Sc x Al 1-x N films on c-sapphire substrates from x = 0.07 to 0.30 by co-evaporating high-purity Sc and Al sources in the presence of a nitrogen plasma generated by an RF plasma source. Epitaxial Sc x Al 1-x N films with highly oriented (0002) grains and in-plane registry were produced on c-sapphire substrates that were pre-exposed to the nitrogen plasma to form an oxynitride seed layer. Growth of Sc x Al 1-x N films was carried out at 930°C under both metal-rich and N-rich conditions using precisely controlled Sc, Al, and N-plasma fluxes. Metal-rich depositions yielded non-(0002)-oriented Sc x Al 1-x N grains and intermetallic ScAl grains. Nitrogen-rich growth with a Sc/Al flux ratio of 1/3 produced the best (0002) epitaxy as determined by x-ray diffraction analysis. Surface acoustic wave resonator (SAWR) devices were fabricated from 500-nm-thick Sc x Al 1-x N and AlN films to extract their electromechanical coupling coefficients, k 2 . As the Sc concentration in the films increases, the degree of (0002) epitaxy is reduced, yet the value of k 2 increases becasue there is more Sc in the wurzite lattice despite the decreased level of (0002) grain alignment. As a result, the use of a 10-nm-thick Si x N y capping layer on top of the Sc x Al 1-x N films aids in preventing etching during SAWR device photolithography and also helps hinder film oxidation up to 800°C.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Nanoparticles for targeted cancer radiotherapy

Radiotherapy, where ionizing radiation is locally delivered either through an external beam or by surgically implanting radionuclide-based seeds in the tumor, is one of the gold standard treatments for cancer. Due to the non-selective nature of radiation, healthy tissue surrounding the cancerous region is usually affected by the treatment. Hence, new strategies, including targeted alpha therapy, are being studied to improve the selectivity of the treatment and minimize side effects. Several challenges, however, limit the current development of targeted radiotherapy, such as the functionalization of the therapeutic agent with targeting vectors and controlling the release of recoiling daughters. Nanoparticles offer unique opportunities as drug delivery vehicles, since they are biocompatible, enhance the cellular uptake of drugs, and are easily functionalized with targeting molecules. In this review, we examine how nanoparticles can be used for targeted radiotherapy, either as sensitizers of external beams or as delivery vehicles for therapeutic radionuclides. Further, we describe the clinical relevance of different types of nanoparticles, followed by an analysis of how these nanoconstructs can solve some of the main limitations of conventional radiotherapy. Finally, we critically discuss the current situation of nanoparticle-based radiotherapy in clinical settings and challenges that need to be overcome in the future for further development of the field.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2025

SymbolFit: Automatic Parametric Modeling with Symbolic Regression

We introduce SymbolFit (API: https://github.com/hftsoi/symbolfit), a framework that automates parametric modeling by using symbolic regression to perform a machine-search for functions that fit the data while simultaneously providing uncertainty estimates in a single run. Traditionally, constructing a parametric model to accurately describe binned data has been a manual and iterative process, requiring an adequate functional form to be determined before the fit can be performed. The main challenge arises when the appropriate functional forms cannot be derived from first principles, especially when there is no underlying true closed-form function for the distribution. In this work, we develop a framework that automates and streamlines the process by utilizing symbolic regression, a machine learning technique that explores a vast space of candidate functions without requiring a predefined functional form because the functional form itself is treated as a trainable parameter, making the process far more efficient and effortless than traditional regression methods. We demonstrate the framework in high-energy physics experiments at the CERN Large Hadron Collider (LHC) using five real proton-proton collision datasets from new physics searches, including background modeling in resonance searches for high-mass dijet, trijet, paired-dijet, diphoton, and dimuon events. We show that our framework can flexibly and efficiently generate a wide range of candidate functions that fit a nontrivial distribution well using a simple fit configuration that varies only by random seed, and that the same fit configuration, which defines a vast function space, can also be applied to distributions of different shapes, whereas achieving a comparable result with traditional methods would have required extensive manual effort.

Tsoi, Ho Fung [Univ. of Pennsylvania, Philadelphia↗
DOE OSTI2020

In-situ re-crystallization of heavily-irradiated Gd 2 Ti 2 O 7

Gadolinium titanate (Gd 2 Ti 2 O 7 , or GTO) and other lanthanide pyrochlores are interesting candidates for actinide waste disposal and fast ion conduction because the relevant material properties are intimately dependent on local cation structure. Therefore, a deep understanding of the kinetics associated with cation ordering and disordering is required if such material properties are to be tuned for specific device designs. To this end, single crystals of GTO were irradiated with 190 keV helium ions to a total fluence of 1 × 10 17 ions/cm 2 , amorphizing the sample surface to a depth of ~1 μm and resulting in significant He bubble accumulation. FIB lamellae lifted out from the irradiated sections were examined during heat treatment in the (scanning) transmission electron microscope. Two distinct stages of the re-crystallization of the amorphized material were observed. The material near the end of the ions’ range transformed first and with the same orientation as the pristine material. This was due to the close proximity of the pristine material and the presence of small defect fluorite seeds, but the propagation of this growth front was frustrated by the large pores (formerly bubbles) in the He accumulation layer. This was followed by heterogeneous nucleation of new crystallites at random orientations at the top of the He accumulation layer, which is attributed to the high surface area associated with the many small He bubbles in that region. Finally, it is inferred that the kinetics of grain growth in this material are significantly faster than the kinetics of grain nucleation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Micromechanical and fatigue in situ synchrotron characterization of an additively manufactured superalloy with porosity

Additive manufacturing (AM) has the potential to transform component production, but its widespread adoption is constrained by defects, such as pores, that compromise structural integrity. Here, this study investigates the influence of porosity on the micromechanical and fatigue response of AM Inconel 718 (IN718), a widely used aerospace superalloy. One baseline specimen with minimal stochastic porosity and another intentionally seeded with lack of fusion (LOF) pores were examined using high-energy X-ray diffraction microscopy (HEDM) and micro-computed tomography during cyclic loading. Fatigue cracks in the LOF specimen initiated more frequently and at lower cycle counts than in the baseline specimen. The number fraction of fatigue cracks that grew was comparatively higher in the LOF specimen. Grain-level metrics, including stress and diffraction spot widths, were quantified using far-field HEDM. Across the thousands of grains detected in both specimens, the pores in the LOF specimen increased the variability of stress and spot width evolution in the azimuthal direction, the latter serving as a surrogate measure of plastic deformation. However, no correlations emerged between these metrics and grain proximity to fatigue crack initiation sites or pores, underscoring the limitations of grain-averaged metrics for predicting fatigue. Nonetheless, the rich dataset reported here provides a foundation for future modeling efforts.

High-energy X-ray diffraction microscopy↗
DOE OSTI2026

The productivity of perennial crops miscanthus and switchgrass is more resistant to vapor pressure deficit stress than maize

Rising atmospheric vapor pressure deficit (D) with warming is an increasingly important driver of crop productivity loss, yet the relative sensitivity of conventional seed crops and alternative perennial crops remains poorly resolved. In this study, we combined a 9-year eddy covariance carbon flux record (2008 – 2016) with 600+ midday leaf water potential (ψ L ) measurements (2024 – 2025) from adjacent maize (Zea mays), miscanthus (Miscanthus x giganteus), and switchgrass (Panicum virgatum) plots to: (1) quantify the limitations of elevated D on crop-specific productivity and (2) evaluate how these responses vary as a function of soil moisture (Θ) status. We found that maize strictly regulated ψ L and its gross primary productivity (GPP) was strongly reduced by increasing D. In contrast, miscanthus and switchgrass allowed larger ψ L declines and sustained higher GPP under similar moisture constraints. D exerted a larger limitation on maize GPP than Θ, but D-driven declines were less severe when accompanied by high Θ. GPP sensitivity to D was also influenced by Θ for miscanthus and switchgrass, but the buffering effect was stronger compared to maize. Specifically, high D paired with high Θ were the most productive conditions for the perennials, reflecting temperature-driven gains in photosynthetic efficiency when evaporative stress was mitigated by sufficient soil water supply. Overall, miscanthus and switchgrass displayed greater resistance to atmospheric drought and more stable GPP across hydroclimate variability than maize. These findings highlight that maize is more vulnerable to future projections of rising D than miscanthus or switchgrass.

drought↗
DOE OSTI2020

Enhanced flow boiling heat transfer on chromium coated zircaloy-4 using cold spray technique for accident tolerant fuel (ATF) materials

Flow boiling heat transfer tests were conducted to evaluate the Critical Heat Flux (CHF) and Heat Transfer Coefficient (HTC) of conventional and accident tolerant fuel (ATF) cladding materials, i.e., bare Zircaloy-4 (Zr4), and Zircaloy-4 coated with Chromium using physical vapor deposition (PVD) (Zr4-Cr-PVD) and cold spray process (Zr4-Cr-CS), respectively. The tests were performed on a single heater rod with a uniform heat flux profile, at the atmospheric pressure, inlet temperature (24 °C) and mass flow rate (750 kg/m 2 s). HTC’s were increased by 5.2% and 3.3% on Zr4-Cr-CS compared to bare Zr4 and Zr4-Cr-PVD. Improved HTCwas attributed to the increased void fraction and high roughness (Ra = 532 nm) of the Zr4-Cr-CS. In detail, the micro-cavities, which act as bubble seeds, were entirely distributed on the Zr4-Cr-CS, and these micro-cavities generated smaller and faster bubbles, thus the void fraction increased by 10.9% compared to bare Zr4. HTC is improved by these smaller and faster bubbles which can remove heat from the heater rod surface more efficiently. To identify the exact location of CHF, the surface temperature profile was measured using advanced fiber-optic sensors which have high temporal/spatial resolution (distance between point to point: ~2.5 mm, frequency ~100 Hz). CHF occurred at 80–95% along the heated length and showed an 11.6% reduction on Zr4-Cr-CS compared to bare Zr4. We hypothesize the CHF reduction was caused by the lower wettability of the Zr4-Cr-CS which reduces the liquid supply to the surface, and vigorous bubble accumulation owing to high void fraction near the outlet, which results in early formation of the vapor film. During the post-CHF quenching phase, the rougher Zr4-Cr-CS showed larger cooling rates compared to the bare Zr4 and Zr4-Cr-PVD, preventing of oxidation by chromium layer. In conclusion, we demonstrate that the high roughness on the Zr4-Cr-CS increased the number of micro-cavities on the surface, resulting in 5.2% increase in HTC and improvement in the quenching heat transfer performance whereas CHF was 11.6% reduced compared to bare Zr4. Overall statistically there is little effect in the coating with regards to CHF and slight improvement in HTC.

42 ENGINEERING↗
DOE OSTI2020

Low-temperature carbonization of polyacrylonitrile/graphene carbon fibers: A combined ReaxFF molecular dynamics and experimental study

Graphene inclusion in a polymer matrix is a promising route to significantly enhance the mechanical properties of low-grade carbon fibers (CFs). Using ReaxFF molecular dynamics simulation, the atomistic mechanism leading to this enhancement is investigated. We demonstrate that the graphene edges along with the nitrogen and oxygen functional groups play a catalytic role and act as seeds to expedite alignment of the all-carbon rings, which are starting sites for the growth of graphitic structures. To examine the role of this proposed mechanism that enhances the graphitic structure of PAN/graphene CFs, we discuss the experimental results wherein the PAN/graphene CFs carbonized at 1250 C demonstrate 91% (from 632 to 1207 MPa) increase in strength and 101% (from 88 to 177 GPa) enhancement in Young’s modulus compared to PAN-based CFs carbonized at 1500 C. In conclusion, these enhanced mechanical properties of low-grade carbon fibers achieved via graphene inclusion at decreased carbonization temperature provide a means to realize both energy savings and cost reduction.

42 ENGINEERING↗
DOE OSTI2025

Hempseed cell wall polysaccharides are dominated by linear xylans and cellulose: Comprehensive structural profiling of ten cultivars of industrial hemp, Cannabis sativa L .

Hempseed is a rich source of dietary fiber; however, there has been limited research on the variability of carbohydrate composition in hempseed cell walls. The primary aim of this study was to conduct a comprehensive chemical and structural analysis of the cell wall polysaccharides in ten hempseed cultivars. Water-soluble polysaccharides (WSP) and water-insoluble residues (WIR) were isolated and subsequently analyzed for their monosaccharide composition using HPAEC-PAD, glycosyl linkage analysis using GC–MS, and structural characterization via NMR spectroscopy. All hempseed cultivars contained a high proportion of insoluble fibers and smaller amounts of soluble polysaccharides. Glucose and xylose were the most abundant components of the WIR fractions, while the WSP fractions contained abundant amounts of galactose, galacturonic acid, arabinose, rhamnose, and mannose. The results of linkage and spectroscopic analysis were consistent with the compositional analysis, identifying cellulose and acetylated linear xylans as primary components of WIR, and arabinogalactans, rhamnogalacturonans, heteromannans, xyloglucans, and arabinan as predominant in WSP. Altogether, the study revealed a comparable cell wall structure among the analyzed hemp seed varieties. The high fiber content of whole hempseed-based ingredients presents significant potential for food manufacturers seeking to develop products with enhanced dietary fiber content, offering both functional and nutritional benefits for consumers.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Belite cements and their activation

Belite cements, BCs, containing mainly belite, alite and calcium aluminates, are currently used as low heat cements. These binders produce high amounts of C–S–H gel and have very good durability properties which are reviewed. Additional advantages include: (i) lower limestone demand, with lower associated CO{sub 2} emissions; (ii) lower energy demand; (iii) lower kiln operating temperature, which means lowering CO{sub 2} and NO{sub x} emissions from fuel burning; and (iv) lower temperature increase at early hydration age. However, early-age strength developments are not competitive with those of Portland cements. Hence, to improve their early-age strength developments is a research priority known as activation. This enhancement can be attained by three compatible approaches: (i) chemical, (ii) physical; and (iii) admixture activations. The current research status for BCs activation is reviewed including: cost-effective element substitutions to stabilize high-temperature forms; fast cooling, milling and mild temperature hydration as physical activation; and the use of C–S–H seeds as admixture activation. After discussion of the resulting microstructures, a research outlook is exercised.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Multidimensional simulations of Mckenna-driven flow tube configuration: Investigating non-ideality in NO x formation flow tube experiments

Multidimensional simulations have been conducted to simulate atmospheric pressure, flat-flame/McKenna-burner-driven-flow tube experiments targeted to obtain NO x speciation data for predicting/analyzing syngas combustion emissions. In a prior work, we demonstrated the impacts of multidimensional transport on post flame region prediction departures from those assuming unidimensional flow/transport conditions. In this work, we develop and utilize a multidimensional laminar reacting flow solver to simulate the fully coupled flame and post flame regions to further elucidate the impacts of the earlier unidimensional modeling assumptions on interpreting post flame NO x experimental data. The model is used to simulate a lean, premixed syngas/air flame and its associated post flame regions within a cylindrical flow-tube-like arrangement. The combustion process takes place under atmospheric condition with trace amount of NO x seeding fed into the inlet gas stream. The spatial evolution of NO x species (NO and NO 2 ) in the flame and in the post-combustion zone suggests two distinct regions: 1) a region encompassing the flame structure itself; and 2) a post flame region in which the temperature decays due to both axial and radial transport processes. The predictions show that for the conditions studied, a pulsatile flow field exists due to the formation of an expanding and contracting recirculation zone in the outer periphery of the flow tube. By resolving the nature of the flow, the resulting time-averaged temperature and species concentrations show improved agreement with existing experimental measurements. The flow-field interaction results in radial inhomogeneities in the NO 2 profiles with the maximum concentration offset from the flow centerline. The location of the peak in NO 2 is coupled with radial temperature gradients from wall cooling effects and their significant influence on NO/NO 2 interconversion kinetics, producing notable NO 2 accumulation in regions near the wall. Geometrical configurations capable of suppressing/minimizing the pulsatile nature are also investigated and the results are compared. Other experimental configurations could be considered in parametric simulations to determine the optimal configuration that would minimize non-idealities in the observations. The work shows the value in performing such computations in advance of settling on a particular design for flow tube/flow reactor experiments.

42 ENGINEERING↗
DOE OSTI2022

Temperature measurements in heavily-sooting ethylene/air flames using synchrotron x-ray fluorescence of krypton

High-fidelity temperature field measurements have been made for several heavily-sooting ethylene/air flames that have historically been challenging environments for conventional optical diagnostics. These challenges have largely been overcome here, in this study, by conducting x-ray fluorescence (XRF) measurements of a Kr fluorescent agent in the hard x-ray regime (15 keV). The current methodology presents a more economical diagnostic than a previously reported implementation of the Kr-XRF method, by limiting seeding of the expensive fluorescent agent to only the fuel stream flows. Detailed reacting flow simulations have been used to interpret experimental signals by tracking the mole fraction of the fluorescent agent in the flow field. Simulated Kr densities are in excellent agreement with measurements throughout the flow field. Temperature measurements of the flow field also agree well with simulations and recent literature studies. However, uncertainties in the measurements become increasingly large downstream of the burner surface as the krypton fraction drops due to mixing of the fuel and co-flow streams. Additionally, we demonstrate that soot particles in the heavily sooting flames studied do not impede the Kr-XRF measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of gasoline composition on the effects of nitric oxide on autoignition and knock in a DISI engine

Modern spark-ignition engines use exhaust gas recirculation (EGR) to dilute the charge and suppress knock, enabling the use of higher compression ratios and/or more optimum combustion phasing for higher efficiency. The effectiveness of EGR is affected by the composition of the fuel and its chemical-kinetic interactions with combustion products. Among those, nitric oxide (NO) has been shown to strongly affect autoignition reactivity. However, the impact of fuel composition of the effect of NO on reactivity is not well-understood. Here, in this study, engine experiments were conducted to assess the impact of NO seeded to the intake on knock-limited operation of two gasoline fuels (high cycloalkane content, or HCA, and high olefin content, or HO). Results showed that compositionally-different fuels responded differently to NO. HCA, which was less knock-limited than HO for NO < 200 ppm, became more knock-limited for NO > 200 ppm. Moreover, it was found that differences in knock between fuels were caused by differences in autoignition chemistry and not in the sequential autoignition process of the end gas that occurs due to thermal stratification. Chemical kinetic simulations were performed to better understand the experimental results. For HCA, intermediate-temperature heat release had a greater impact on autoignition reactivity than low-temperature heat release, while the opposite was observed for HO. For both fuels, NO enhances the magnitude of low-temperature heat release via NO + HO 2 → NO 2 + OH. The effect of NO on reactivity was stronger for HCA because OH produced from NO helped to overcome the OH quenching effect of cyclopentane, a main species in HCA. In contrast, HO had relatively strong inherent low-temperature chemistry arising from iso-octane, which reduced the impact of NO on reactivity. For the range of NO mole fractions tested in this study, in-cylinder NO increased fuel’s knock propensity, especially for fuels with mild low-temperature chemistry.

Autoignition↗
DOE OSTI2020

Robust galactomannan/graphene oxide film with ultra-flexible, gas barrier and self-clean properties

Here, this study examines a facile technology to manufacture food packaging alternatives with superior mechanical, ultra-flexible, gas barrier and self-cleaning properties, based on green and benign starting materials. A novel galactomannan (GM) was isolated from the Sesbania cannabina seeds, which was used as a matrix for the fabrication of GM-based films. Inspired by the brick-and-mortar structure of natural nacre, a facile method was adopted to fabricate an artificial nacre based on the self-assembly of GM and borate crosslinked graphene oxide (GO). These GM/GO composites are ultra-flexible, which can be folded into various shapes. The tensile strength reached 135.54 MPa which is 2.40 times that of the pure GM film. In addition, after coating with the poly(dimethylsiloxane) (PDMS), these films became hydrophobic (WCA around 120°) with self-cleaning properties. Our study further revealed that the oxygen and water vapor permeabilities were improved with the introduction of GO and PDMS coating.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Enhancing photoionization rate calculations in low-temperature plasmas using spectral methods

Photoionization plays a central role in the development of streamer discharges and other non-equilibrium plasma phenomena. It creates seed electrons, which are essential for positive streamer propagation, allowing the ionization front to move forward. Because of this, accurate modeling of photoionization is very important for predicting streamer behavior and plasma evolution. The photoionization process in air (N 2 – O 2 mixture) is often described by the Zheleznyak model (1982). This model is usually solved through Helmholtz-type equations that approximate the Zheleznyak photoionization model (Zheleznyak et al. 1982) as Partial Differential Equations (PDEs). Conventional numerical methods, such as the Finite Difference Method (FDM) or Finite Volume Method (FVM), are widely used to solve these equations. Although they are prevalent, the computational cost of these methods due to their need for matrix operations and iterative solver is demanding. To address this challenge, this work develops a spectral solver based on the Fast Fourier Transform (FFT) combined with Discrete Cosine Transform (DCT) and Discrete Sine Transform (DST) to calculate the photoionization rate efficiently in an axisymmetric cylindrical domain. This method naturally satisfies the boundary conditions used in the model and converts the PDE into algebraic ones in spectral space. Thus, avoids the need for iterative matrix solvers. When compared with FDM results, it is demonstrated that the new solver not only maintains accuracy, but also reduces the computational cost, showing a performance increase of approximately 100 compared to FDM over a wide range of problem sizes. The method is parallelized using Message Passing Interface (MPI) and has been integrated into a fluid plasma model for streamer simulation. Here, this FFT-based approach provides a fast and reliable alternative for calculating photoionization in fluid models, helping large-scale plasma simulations run faster and efficiently, and allows higher-resolution simulation without extra computational cost.

Axisymmetric system↗
DOE OSTI2024

An orphan gene BOOSTER enhances photosynthetic efficiency and plant productivity

Organelle-to-nucleus DNA transfer is an ongoing process playing an important role in the evolution of eukaryotic life. Here, genome-wide association studies (GWAS) of non-photochemical quenching parameters in 743 Populus trichocarpa accessions identified a nuclear-encoded genomic region associated with variation in photosynthesis under fluctuating light. The identified gene, BOOSTER (BSTR), comprises three exons, two with apparent endophytic origin and the third containing a large fragment of plastid-encoded Rubisco large subunit. Higher expression of BSTR facilitated anterograde signaling between nucleus and plastid, which corresponded to enhanced expression of Rubisco, increased photosynthesis, and up to 35% greater plant height and 88% biomass in poplar accessions under field conditions. Overexpression of BSTR in Populus tremula × P. alba achieved up to a 200% in plant height. Similarly, Arabidopsis plants heterologously expressing BSTR gained up to 200% in biomass and up to 50% increase in seed.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Initial plant community responses to hardwood control treatments in restoration of remnant longleaf pine (Pinus palustris) woodlands

Changes in land use over the past century have contributed to substantial losses of longleaf pine (Pinus palustris) woodlands in the southeastern USA and replacement with higher density, mixed pine and hardwood stands that suppress understory development and limit application of prescribed fire. To increase understanding of limiting factors and identify potential approaches for restoring longleaf pine woodlands, we studied in this work initial availability of light and soil water and 2-year (2018–2019) plant community responses after controlling overstory hardwoods in five remnant longleaf pine woodlands having no evidence of previous agriculture at the Savannah River Site near Aiken, SC, USA. Seven hardwood control treatments and a non-treated check were compared in a randomized compete block experiment: cutting, cutting + shredding of logging residues, stem injection with imazapyr herbicide, cutting + basal spray with imazapyr herbicide, cutting + basal spray with triclopyr herbicide, cutting + directed foliar spray with a mixture of glyphosate and imazapyr herbicides, and cutting + broadcast foliar spray with the same herbicide mixture. In the year prior to hardwood cutting (2016), understory light availability averaged 23% of full sun. Throughout the year of treatment installation (2017), average soil water content (SWC) was below permanent wilting point (5.5% SWC) where overstory hardwoods were retained; whereas, it was above wilting point (7.5%) where they had been cut. Thus, combined effects of shade and root competition from overstory hardwoods probably limited cover of herbaceous species in the non-treated check. In the 2 years following treatment, hardwood survival averaged > 99%, 62%, 42% and < 1% for the non-treated check, cutting, shredding, and herbicide treatments, respectively. Relative to the non-treated check, herbaceous species richness was increased by shredding, stem injection, basal spray, or directed foliar treatments; herbaceous cover was increased by basal spray or directed foliar treatments; and woody cover was decreased by directed or broadcast foliar treatments. The directed foliar spray was the most effective treatment for achieving many of the desired understory characteristics of a longleaf pine woodland, including a diverse understory dominated by herbaceous vegetation capable of supporting periodic prescribed fires. Although the imazapyr basal spray treatment increased cover of remnant woodland indicator species, none of the treatments increased richness of this species group, suggesting that restoration of native species composition will be expedited by enrichment seedings or plantings.

60 APPLIED LIFE SCIENCES↗