Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “scale-up”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Multi-Column Xe/Kr Separation with AgZ-PAN and HZ-PAN

Previous multi-column xenon/krypton separation tests have demonstrated the capability of separating xenon from krypton in a mixed gas feed stream. The results of this initial testing with AgZ-PAN and HZ-PAN indicated that an excellent separation of xenon from krypton could be achieved. Building upon these initial results, a series of additional multi-column testing were performed in FY-16. The purpose of this testing was to scale up the sorbent beds, test a different composition of feed gas and attempt to improve the accuracy of the analysis of the individual capture columns’ compositions. Two Stirling coolers were installed in series to perform this testing. The use of the coolers instead of the cryostat provided two desired improvements, 1) removal of the large dilution due to the internal volume of the cryostat adsorption chamber, and 2) ability to increase the sorbent bed size for scale-up. The AgZ-PAN sorbent, due to its xenon selectivity, was loaded in the first column to capture the xenon while allowing the krypton to flow through and be routed to a second column containing the HZ-PAN for capture and analysis. The gases captured on both columns were sampled with evacuated sample bombs and subsequently analyzed via GC-MS for both krypton and xenon. The results of these tests can be used to develop the scope of future testing and analysis using this test bed for demonstrating the capture and separation of xenon and krypton using sorbents, for demonstrating desorption and regeneration of the sorbents, and for determining compositions of the desorbed gases. They indicate a need for future desorption studies in order to better quantify co-adsorbed species and final krypton purity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Tailoring Cementitious Materials Towards Value-Added Use of Large CO 2 Volumes

A novel method was developed for the use of carbon dioxide as a raw material in production of hydraulic cements. The solid raw materials were selected to produce a chemistry that is amenable to the formation of alkali aluminosilicate hydrates and carbonates. These raw materials were first pelletized using a relatively low moisture content in the presence of carbon dioxide gas. The resulting pellets were then subjected to milling action in the presence of carbon dioxide in order to mechanochemically transform them into a hydraulic cement comprising largely of alkali aluminosilicates and metastable carbonates. Hydration of this hydraulic cement produces an integrated binder comprising largely of alkali aluminosilicate hydrates and finely dispersed crystalline carbonates. Analytical chemistry and physical test methods were employed in order to evaluate the composition and properties of pellets and the resultant hydraulic cement. The CO 2 uptake of the cement was measured at about 10 wt.%, which was raised with increasing milling duration in a carbon dioxide environment. The composition of the hydraulic cement was refined to further increase the use of abundant and market-limited industrial byproducts as raw materials, and to produce a balance of performance characteristics that meet standard requirements. Concrete materials were prepared with the hybrid hydraulic cement developed in the project, and were thoroughly characterized. The hydraulic cement formulation was further refined in order to produce concrete materials with desired deicer salt scaling resistance. The fresh mix attributes of the hybrid cement concrete were thoroughly characterize in order to evaluate its rheological characteristics, bleeding and plastic shrinkage cracking resistance. The resultant concrete was found to produce mechanical, physical and durability characteristics that were superior to those of conventional Portland cement concrete. The fresh mix rheology, bleeding and plastic shrinkage cracking resistance of the hybrid cement concrete were found to be compatible with the mainstream construction practices. Scalability and compatibility with industrial-scale practices are key to the commercial success of the new class of hydraulic cements developed in this project. These attributes cannot be easily assessed in laboratory-scale investigations. Energy-based models were developed to enable scale-up of the process. Pilot-scale implementation of the process in a power plant was successful. Theoretical analyses complemented with pilot-scale experimental investigations indicated that the transformation from laboratory- to pilot-scale mechanochemical processing can reduce the milling duration by up to 85%. The data produced in pilot-scale processing of the hydraulic cement was used to assess the net carbon footprint of the resultant binder, which was found to be negative due to uptake of carbon dioxide in the process. The energy content of the new hydraulic cement was significantly below that of Portland cement, and it also offered favorable economics. Significant support has been raised for industrial-scale demonstration and commercialization of the technology. A theoretical framework was established based on thermodynamic and diffusion principles to explain the mechanochemical capture and value-added use of carbon dioxide in hydraulic cement production.

01 COAL, LIGNITE, AND PEAT↗

Cross-cutting High Surface Area Graphene-based Frameworks with Controlled Pore Structure/Dopants

The goal of this project is to enhance the performance of graphene-based materials by manufacturing specific 3D architectures. The materials have global applications regarding fuel cell catalysts, gas adsorbents, supercapacitor/battery electrodes, ion (e.g., actinide) capture, gas separation, oil adsorption, and catalysis. This research focuses on hydrogen storage for hydrogen fuel cell vehicles with a potential transformational impact on hydrogen adsorbents that exhibit high gravimetric and volumetric density, a clean energy application sought by the Department of Energy. The development of an adsorbent material would enable broad commercial opportunities in hydrogen-fueled vehicles, promote new advanced nanomanufacturing scale-up, and open other opportunities at Savannah River National Laboratory to utilize a high surface area material that is robust, chemically stable, and radiation resistant.

36 MATERIALS SCIENCE↗

Mixo-IBR BP1A Report

The objective of the initial budget period was to determine whether BioProcess Algae (BPA) had all of the data, information, facilities, and agreements presented in its proposal response to DE-FOA-0000739. BPA was to demonstrate heterotrophic lipid production, demonstrate the production of fuels by metathesis of algal oils, and develop data to justify the scale-up effort proposed for the Pilot Mixotrophic Algae Integrated Biorefinery.

09 BIOMASS FUELS↗

Low-Cost Proton Conducting Membranes for PEM Fuel Cells

Proton exchange membrane (PEM) is the key component in PEM fuel cells that critically determines the system performance and its economic viability. Presently, the state-of-the-art PEMs, such as Nafion membranes, are based on perfluorosulfonic acid (PFSA) ionomers. But these ionomer materials are expensive, particularly at the low volumes that will be needed for initial commercialization. Besides, they are not suitable for fuel cells operated beyond 100°C, because of the limitations connected to the humidification requirement of such membrane materials, limiting the maximum operating temperature to about 90°C. Fuel cells for transportation applications are required to operate in a wide temperature range from –20°C to 120°C. Low-cost PEMs with capabilities in a range of temperature and humidity conditions are urgently needed to meet the DOE fuel cell targets for transportation applications. Amsen Technologies LLC chooses to address the DOE call with a novel reinforced PEM approach based on new, non-PFSA proton conducting ionomers developed from our previous DOE SBIR projects. Along with this approach is the use of very cheap, ultra thin and highly porous microporous polymer meshes as the support for the membrane. The new PEM is expected to have significant cost advantages over traditional PEMs. The microporous polyolefin support costs $2-3/m 2 ; and the new ionomers that Amsen has developed are estimated at ~$\$$250/kg at the higher end including material costs and labor costs (which may go down in the future as the processing is optimized and production scaled up). These have led to an estimate of total material cost for the membrane at $\$$11 to $\$$12/m 2 , offering high potential of meeting the DOE cost targets (≤$\$$20/m 2 ) after adding processing cost and profit margin. The Phase I results have successfully demonstrated that it is very promising to develop the intended low-cost, high-performance PEM membrane. Suitable material system has been identified, and suitable process for forming the new PEM has been developed. Uniform membranes have been reproducibly fabricated. These membranes have been extensively characterized and evaluated in terms of microstructural features, and relevant physical and chemical properties including proton conductivity and area specific proton resistance in a range of temperature and humidity conditions, resistance to electronic conduction, water uptake/swelling, dimensional stability, chemical stability, and mechanical durability. Membrane electrode assemblies (MEA) with the new membrane have been successfully prepared and tested for fuel cell operation. The new PEM showed higher proton conductivity than Nafion membranes for all measurement conditions used in Phase I. With high proton conductivity and ultra-thin thickness (~20 /m), the new membrane showed high promise to met DOE targets for the low ASR. The ASR targets have been met for relatively high RH but not yet for RH ≤ 70%. Further optimization in ionomer chemistry and membrane processing is needed in order to meet the ASR targets for a wide range of temperature and humidity conditions. The new membrane showed fairly high electronic resistance at 1373 ohm cm 2 , meeting the DOE target for electronic resistance (> 1000 ohm cm 2 ). The new membrane also has demonstrated promisingly high chemical stability, high mechanical durability, and high dimensional stability. Fuel cell operation using MEAs with the new membrane have shown the same level of fuel cell performance as MEAs with Nafion membranes. Overall, the new membrane has been demonstrated to have high potential of meeting all DOE performance targets for fuel cell applications as well as the cost targets. The manufacturers of PEM fuel cells, PEM electrolyzers, redox flow batteries, and MEA are the end-users and customers of PEMs. For commercialization purpose and potential partnering relations, we have been talking with many such manufacturers. They have responded with extremely high interest in the new PEM being developed in the present technology. Accomplishments so far have laid down a strong base for Amsen to further the development efforts on this new PEM and to pursue commercialization. The near-term future work will be mainly focused on further development and systematical optimization of the material system, processing, and performance of the new membrane; systematical evaluation of the new membrane in terms of all relevant properties including long-term mechanical, chemical, and combined chemical/mechanical durabilities using DOE specified testing protocols; development of production scale-up scheme; and preparation for commercialization.

08 HYDROGEN↗

Development of a Reduced-Order Model for Reacting Gas-Solids Flow using Proper Orthogonal Decomposition

This report summarizes the objectives, tasks and accomplishments made during the three year duration of this research project. The report presents the results obtained by applying advanced computational techniques to develop reduced-order models (ROMs) in the case of reacting multiphase flows based on high fidelity numerical simulation of gas-solids flow structures in risers and vertical columns obtained by the Multiphase Flow with Interphase eXchanges (MFIX) software. The research includes a numerical investigation of reacting and non-reacting gas-solids flow systems and computational analysis that will involve model development to accelerate the scale-up process for the design of fluidization systems by providing accurate solutions that match the full-scale models. The computational work contributes to the development of a methodology for obtaining ROMs that is applicable to the system of gas-solid flows. Finally, the validity of the developed ROMs is evaluated by comparing the results against those obtained using the MFIX code. Additionally, the robustness of existing POD-based ROMs for multiphase flows is improved by avoiding non-physical solutions of the gas void fraction and ensuring that the reduced kinetics models used for reactive flows in fluidized beds are thermodynamically consistent.

42 ENGINEERING↗

Development of Cost-Competitive Advanced Thermoelectric Generators for Direct Conversion of Vehicle Waste Heat into Useful Electrical Power

General Motors LLC (GM) proposed a project to develop a cost-effective thermoelectric generator (TEG) that is fully integrated into a GM production light-duty vehicle. The project goal was to reduce automotive energy consumption and CO 2 emissions by generating usable electricity from exhaust gas waste heat. The project objectives were to overcome the major obstacles to TEG commercialization and demonstrate 5% fuel economy improvement over the US06 drive cycle. We investigated electrical and thermal management strategies that included: (1) reducing electrical accessory load on the alternator using thermoelectric (TE) generated power; (2) shifting engine-driven accessories to electrical drive to raise the electrical accessory load consumption; (3) attempting to use the excess electrical power for something other than the vehicle electrical load e.g., propulsion (optimal for hybrids); and (4) implementing fast engine/transmission warm-up during cold-start. We developed a TEG system and all vehicle controls and electrical systems for full vehicle integration. The TEG system was modeled and analyzed for performance and cost. Heat exchangers and thermal interfaces between heat exchangers and TE modules were optimized for TE performance. Other objectives of the project were to (1) further optimize compositions and processing parameters for TE materials, (2) develop suitable diffusion barriers, interfaces electrical interconnections, and thermal contacts within TE modules, (3) implement adequate protection of TE materials and modules from degradation during operation, and (4) develop manufacturing and assembly processes for large scale production of TE materials and components that include scale-up plans for the production of 100,000 TEG units per year.

33 ADVANCED PROPULSION SYSTEMS↗

Large Pilot-Scale Carbon Dioxide (CO2) Capture Project Using Aminosilicone Solvent.Final Scientific/Technical Report

GE Global Research has developed, over the last 8 years, a platform of cost effective CO2 capture technologies based on a non-aqueous aminosilicone solvent (GAP-1m). As demonstrated in previous funded DOE projects (DE-FE0007502 and DEFE0013755), the GAP-1m solvent has increased CO2 working capacity, lower volatility and corrosivity than the benchmark aqueous amine technology. Performance of the GAP-1m solvent was recently demonstrated in a 0.5 MWe pilot at National Carbon Capture Center, AL with real flue gas for over 500 hours of operation using a Steam Stripper Column (SSC). The pilot-scale PSTU engineering data were used to (i) update the techno-economic analysis, and EH&S assessment, (ii) perform technology gap analysis, and (iii) conduct the solvent manufacturability and scale-up study.

01 COAL, LIGNITE, AND PEAT↗

Data Driven Smart Proxy for CFD: Application of Big Data Analytics & Machine Learning in Computational Fluid Dynamics (Part 1)

Simulation technologies can reduce the time and cost of the development and deployment of advanced technologies and allow rapid scale-up of these technologies for fossil fuel based energy systems. However, to ensure their usefulness in practice, the credibility of the simulations needs to be established with Uncertainty Quantification (UQ) methods. National Energy Technology Laboratory (NETL) has been applying non-intrusive UQ methodologies to categorize and quantify uncertainties in CFD simulations of gas-solid multiphase flows. To reduce the computational cost associated with gas-solid flow simulations required for UQ analysis, techniques commonly used in the area of Artificial Intelligence (AI) and Data Mining (DM) are used to construct smart proxy models, which can reduce the computational cost of conducting large number of multiphase CFD simulations.

97 MATHEMATICS AND COMPUTING↗

Final Technical Report

In September 2010, RTI and the DOE/NETL signed a cooperative agreement (DE-FE000489) to design, build, and operate a pre-commercial syngas cleaning system that would capture up to 90% of the CO 2 in the syngas slipstream, and demonstrate the ability to reduce syngas contaminants to meet DOE’s specifications for chemical production application. This pre-commercial syngas cleaning system is operated at Tampa Electric Company’s (TEC) 250-MWe integrated gasification combined cycle (IGCC) plant at Polk Power Station (PPS), located near Tampa, Florida. The syngas cleaning system consists of the following units: Warm Gas Desulfurization Process (WDP) - this unit processes a syngas flow equivalent of 50 MWe of power (50 MWe equivalent corresponds to about 2.0 MM scfh of syngas on dry basis) to produce a desulfurized syngas with a total sulfur (H 2 S+COS) concentration ~ 10 ppmv. Water Gas Shift (WGS) Reactor - this unit converts sufficient CO into CO 2 to enable 90% capture of the CO 2 in the syngas slipstream. This reactor uses conventional commercial shift catalyst technologies. Low Temperature Gas Cooling (LTGC) - this unit cools the syngas for the low temperature activated MDEA process and separates any condensed water. Activated MDEA Process (aMDEA) - this unit employs a non-selective separation for the CO 2 and H 2 S present in the raw syngas stream. Because of the selective sulfur removal by the upstream WDP unit, the CO 2 capture target of 90% CO 2 can be achieved with the added benefit that total sulfur concentration in the CO 2 product is < 100 ppmv. An additional advantage of the activated MDEA process is that the non-selective sulfur removal from the treated syngas reduces sulfur in the treated gas to very low sub-ppmv concentrations, which are required for chemical production applications. Testing to date of this pre-commercial syngas cleaning system has shown that the technology has great potential to provide clean syngas from coal and petcoke-based gasification at increased efficiency and at significantly lower capital and operating costs than conventional syngas cleanup technologies. However, before the technology can be deemed ready for scale-up to a full commercial-scale demonstration, additional R&D testing is needed at the site to address the following critical technical risks: WDP sorbent stability and performance; Impact of WDP on downstream cleanup and conversion steps; Metallurgy and refractory; Syngas cleanup performance and controllability; Carbon capture performance and additional syngas cleanup The proposed plan to acquire this additional R&D data involves: Operation of the units to achieve an additional 3,000 hours of operation of the system within the performance period, with a target of achieving 1,000 hours of those hours via continuous operation of the entire integrated pre-commercial demonstration system; Rapid turnaround of repairs and/or modifications required as necessary to return any specific unit to operating status with documentation and lessons learned to support technology maturation, and; Proactive performance of maintenance activities during any unplanned outages and if possible while operating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Next Generation Three-Way Catalysts for Future, Highly Efficient Gasoline Engines (Final Technical Report)

Ford Motor Company, Oak Ridge National Laboratory, and the University of Michigan completed a 3.25 year project on exhaust catalysts for gasoline vehicles that exhibit higher activity at lower temperatures down to 150°C. Ford has successfully used catalysts on cars and trucks to control emissions for over forty years. Changes in gasoline engine technology have allowed the use of “high tech” three-way catalysts (TWCs) to simultaneously control HC (hydrocarbons), CO (carbon monoxide), and NOx (nitrogen oxides) at nearly 100% efficiency. Excess fueling is used upon engine start to heat the catalyst up to its full operating temperature of greater than 350°C, lowering fuel economy and creating particulate matter. It was desirable to develop new catalysts for lower operating temperatures that may occur with future, more efficient gasoline powered vehicles, while still being durable to 150,000 mi with peak temperatures of 960°C. The work included laboratory preparation, aging, and poisoning of catalyst materials, activity tests, and chemical analyses. The objective of this project was to demonstrate progress toward the USDRIVE goal of achieving durable 90% conversion (T90) of hydrocarbons (HC), carbon monoxide (CO), and oxides of nitrogen (NOx) at 150°C. The project partners focused on several supported metal catalyst structures to promote lower light-off temperatures, enhance metal-support interaction, and improve durability. The raw materials (oxides of aluminum, cerium, silicon, titanium, and zirconium) were not new, but were used in novel ways. Palladium (Pd) or rhodium (Rh) were supported either on layered metal oxide supports, on nanoparticles, or used in various core@shell configurations. Catalyst materials were aged hydrothermally to a simulated high mileage. The catalyst formulation with the lowest durable light-off was 0.5 wt% Rh supported on alumina with an overlayer of either Ti or Zr. The temperatures for 90% conversion were up to 128°C lower than those of a commercial Pd three-way catalyst that had > 3x metal loading of the new Rh catalyst. An additional material made of Pd supported on nanoparticles of ceria-zirconia (CZO) was also considered; the aged T90s were up to 40°C lower than the commercial catalyst, at similar metal loading. Further understanding of the catalyst architecture provided additional confidence to move forward with scale-up of 0.5 wt% Rh/Ti/Al2O3 to coated monolith laboratory cores for further evaluation. The team worked with Johnson Matthey to accomplish this, in addition to exploring manufacturability and potential costs. The overall benefit was estimated to be 10-15% lower NMOG and NOx tailpipe emissions on a cold start certification cycle.

54 ENVIRONMENTAL SCIENCES↗

Scale Up of Malonic Acid Fermentation Process: Cooperative Research and Development Final Report, CRADA Number CRD-16-612

The goal of this work is to use the large fermentation vessels in the National Renewable Energy Laboratory's (NREL) Integrated Biorefinery Research Facility (IBRF) to scale-up Lygos' biological-based process for producing malonic acid and to generate performance data. Initially, work at the 1 L scale validated successful transfer of Lygos' fermentation protocols to NREL using a glucose substrate. Outside of the scope of the CRADA with NREL, Lygos tested their process on lignocellulosic sugars produced by NREL at Lawrence Berkeley National Laboratory's (LBNL) Advanced Biofuels Process Development Unit (ABPDU). NREL produced these cellulosic sugar solutions from corn stover using a separate cellulose/hemicellulose process configuration. Finally, NREL performed fermentations using glucose in large fermentors (1,500- and 9,000-L vessels) to intermediate product and to demonstrate successful performance of Lygos' technology at larger scales.

09 BIOMASS FUELS↗

Combining Experiments and Simulations of Extraction Kinetics and Thermodynamics in Advanced Separation Processes for Used Nuclear Fuel

This 3-year project was a collaboration between University of California Irvine (UC Irvine), Pacific Northwest National Laboratory (PNNL), Idaho National Laboratory (INL), Argonne National Laboratory (ANL) and with an international collaborator at ForschungZentrum Jülich (FZJ). The project was led from UC Irvine under the direction of Profs. Mikael Nilsson and Hung Nguyen. The leads at PNNL, INL, ANL and FZJ were Dr. Liem Dang, Dr. Peter Zalupski, Dr. Nathaniel Hoyt and Dr. Giuseppe Modolo, respectively. Involved in this project at UC Irvine were three full time PhD graduate students, Tro Babikian, Ted Yoo, and Quynh Vo, and one MS student, Alba Font Bosch. The overall objective of this project was to study how the kinetics and thermodynamics of metal ion extraction can be described by molecular dynamic (MD) simulations and how the simulations can be validated by experimental data. Furthermore, the project includes the applied separation by testing the extraction systems in a single stage annular centrifugal contactor and coupling the experimental data with computational fluid dynamic (CFD) simulations. Specific objectives of the proposed research were: Study and establish a rigorous connection between MD simulations based on polarizable force fields and extraction thermodynamic and kinetic data. Compare and validate CFD simulations of extraction processes for An/Ln separation using different sizes (and types) of annular centrifugal contactors. Provide a theoretical/simulation and experimental base for scale-up of batch-wise extraction to continuous contactors. We approached objective 1 and 2 in parallel. For objective 1 we started by studying a well established extraction system with a relatively simple extraction mechanism, namely tributyl phosphate. What we found was that well optimized simulations can inform experiments and new information on TBP behavior was presented in this project, as well be discussed below. The second objective proved a larger challenge and most of the efforts were devoted to experimental studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Development of Mixed-Salt Technology for CO 2 Capture from Coal Power Plants

SRI International (SRI), in collaboration with Stanford University, OLI Systems (OLI), Politecnico de Milano (PoliMi), and Aqueous Systems Aps (ASApS) performed a 45-month effort to develop a promising Mixed-Salt Process (MSP) for carbon dioxide capture. The MSP combines existing ammonia and potassium-carbonate technologies with improved absorption steps for rate enhancement and ammonia emission reduction and a novel selective regeneration process with a high-pressure CO 2 product to introduce a new and advanced transformational solvent-based technology. The striking advantages of the SRI MSP include: low heat of reaction, high loading of CO 2 , high-pressure regeneration of > 99% pure dry CO 2 , low sensitivity to impurities, low process cost, use of a non-degradable low-cost solvent with a very low carbon footprint for its production, low emissions, and reduced water use compared to the state-of-the-art ammonia-based and amine technologies. The overall objective of the project was to develop and test a solvent-based CO 2 capture technology that can capture CO 2 from existing or new pulverized coal (PC) power plants at low cost. Our specific goal was to test SRI’s newly developed MSP at the large bench-scale level to demonstrate that the process could capture CO 2 at high efficiency (> 90%) with very high CO 2 loading (> 10 wt.%), require less than 2 GJ/tonne for solvent regeneration, and produce a CO 2 stream at high pressure with a purity > 95 vol.%. This 45-month MSP development program was designed to conduct (1) extensive test campaigns with different process flowsheet variants, and (2) detailed thermodynamic, kinetic, and process modeling. These tests and models were very important to identify any issues associated with the process in the early stages and then resolve them before moving into the next scale-up (> 1 MWe scale) testing. The technology development plan consisted of balanced experimental and process modeling activities as shown in Figure i. Such an approach reduces the risks associated with the process operability at large scales and provides capital and operating expenditure (CAPEX/OPEX) predictions with improved accuracies. Under the MSP development program at SRI, we performed an aggressive testing campaign with individual subsystems as well as integrated CO 2 capture and regeneration system to identify the best operating conditions. The project was carried out in two budget periods (BP1 & BP2).

20 FOSSIL-FUELED POWER PLANTS↗

Energy from Biomass Research and Technology Transfer Program

The purpose of CPBR is to foster and facilitate research that will lead to commercial applications. The goals of CPBR’s Energy from Biomass Research and Technology Transfer Program are to bring together industry, academe, and federal resources to conduct research in plant biotechnology and other bio-based technologies and to facilitate the commercialization of the research results to: (1) improve the utilization of plants as energy sources; (2) reduce the cost of renewable energy production; (3) facilitate the replacement of petroleum by plant-based materials; (4) create an energy supply that is safer in its effect on the environment, and (5) contribute to U.S. energy independence. CPBR brings together the resources of member organizations to address the problems and the future of U.S. plant-derived energy resources and plant-based energy industries through a program of industrially relevant, scientifically meritorious basic, applied, and scale-up research. The process of selecting projects is highly competitive. It insures that the work carried out through CPBR has technical merit, commercial relevance, and high potential for the transfer of new technologies from the academic research laboratory to the marketplace.

09 BIOMASS FUELS↗

SuperCDMS Prototype Detector Design and Testing

A substantial amount of astrophysical evidence indicates that approximately a quarter of all energy in the universe is composed of a nonluminous, and nonbaryonic \dark" matter. Of the potential dark matter particle candidates, Weakly Interacting Massive Particles, or WIMPs, is particularly well motivated. As a means to directly detect WIMP interactions with baryonic matter, the Cryogenic Dark Matter Search (CDMS) project was established, operating at the Soudan Underground Laboratory from 2003 - 2015, under the CDMS II and SuperCDMS Soudan experiments. CDMS detectors simultaneously measure the ionization and phonon energies of recoil events in Si and Ge crystals kept at cryogenic temperatures in a low-background environment. The ratio of ionization energy to recoil energy serves as a discrimination parameter to separate nuclear recoil events from the electron-recoil background. The next installation, SuperCDMS SNOLAB, is preparing for future operation, with an initial payload of eighteen Ge and six Si, 100 mm diameter, 33 mm thick detectors. Of this initial payload, eight Ge and four Si detectors will operate in a high-voltage ( 100 V) mode, which have an increased sensitivity to low-mass WIMPs due to decreased energy thresholds. The SuperCDMS test facility at University of Minnesota aids in the detector R&D and characterization of prototype detectors, as part of the scale-up eort for Super- CDMS SNOLAB. This thesis presents the rst full ionization and phonon characterization study of a 100 mm diameter, 33 mm thick prototype Ge detector with interleaved phonon and ionization channels. Measurements include ionization collection eciency, surface event rejection capabilities, and successful demonstration of nuclear recoil event discrimination. Results indicate that 100 mm diameter, interleaved Ge detectors show potential for use in SuperCDMS SNOLAB. As part of detector R&D, the Minnesota test facility also looks beyond the next stage of SuperCDMS, investigating larger individual detectors as a means to easily scale up the sensitive mass of future searches. This thesis presents the design and initial testing results of a prototype 150 mm diameter, 33 mm thick silicon ionization detector, which is 5.2 times larger than those used in SuperCDMS at Soudan and 2.25 times larger than those planned for use at SuperCDMS SNOLAB. In addition, the detector was operated with contact-free ionization electrodes to minimize bias leakage currents, which can limit operation at high bias voltages. The results show promise for the operation of both large volume silicon detectors and contact-free ionization electrodes for scaling up detector mass and bias.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Small-scale pilot plant for gasification of coal and coal/biomass blends and conversion of derived syngas to liquid fuels via Fischer-Tropsch synthesis

This report describes the second phase of a project to design, construct and commission an integrated coal/biomass-to-liquids facility at a capacity of 1 bbl. /day at the University of Kentucky Center for Applied Energy Research (UK-CAER) – specifically for construction, commissioning and operating of the downstream process units for water-gas-shift, Fischer-Tropsch synthesis and balance of plant [BOP]. The deliverables from the operation of this pilot plant is firstly the liquid F-T products and finished fuels which are of interest to UK-CAER’s academic, government and industrial research partners. Going forward the facility will produce research quantities of F-T liquids and finished fuels for subsequent Fuel Quality Testing, Performance and Acceptability. Moreover, the facility is expected to be employed for a range of research and investigations related to: Feed Preparation, Characteristics and Quality; Coal and Biomass Gasification; Gas Clean-up/ Conditioning; Gas Conversion by -F-T Synthesis; Product Work-up and Refining; Systems Analysis and Integration; and Scale-up and Demonstration. Environmental Considerations - particularly how to manage and reduce carbon dioxide emissions from CBTL facilities and from use of the fuels will be a primary research objective. The results of this second phase study include the FEED study and detailed engineering design of the downstream processing units and BOP, the selection of a range of technologies and technology vendors, the as-built plant - its equipment and capabilities, and the results of two trial production runs, one with coal only and one with a coal/biomass blend. These are described in detail in this report.

01 COAL, LIGNITE, AND PEAT↗

Final Technical Report

The goal of this project was to cut the per-wafer equipment cost for PECVD by more than 50% by adopting a Gen 8.5 thin-film manufacturing toolset originally developed for the LCD industry, significantly reducing the total capital-cost, cost-of-capital and wafer-to-cell production cost associated with HVM of Triex cells. Since PECVD is a common process step for many advanced Si PV cells, successful implementation of this device will broad-reaching implications across the domestic PV manufacturing industry. As a domestic PV manufacturing company in a challenging market, Silevo must focus our existing private funding and revenues on developing low-risk, short-term evolutionary improvements to our existing products and manufacturing process for scale-up. As such, without DOE funding, progress toward developing the high-impact manufacturing process described here, will not occur. However, this program leveraged more than $100M in past investment to develop this product and pilot-scale process tool, as well as significant funding that is being deployed to build our 200MW manufacturing plant in NY. With DOE funding, our proposed Gen 8.5 PECVD tool will reduce the CapEx cost associated with this expansion by 29%, allowing us to increase the scale of the Phase 2 facility to 550MW at the same level of investment as our current plan of record. Once this project is complete, all future funding needed to deploy this technology will come from private sources (product revenue and private finance), with no need for future government funding.

14 SOLAR ENERGY↗