Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “robust estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Joint iterative reconstruction and 3D rigid alignment for X-ray tomography

X-ray tomography is widely used for three-dimensional structure determination in many areas of science, from the millimeter to the nanometer scale. The resolution and quality of the 3D reconstruction is limited by the availability of alignment parameters that correct for the mechanical shifts of the sample or sample stage for the images that constitute a scan. In this paper we describe an algorithm for marker-free, fully automated and accurately aligned and reconstructed X-ray tomography data. Our approach solves the tomographic reconstruction jointly with projection data alignment based on a rigid-body deformation model. We demonstrate the robustness of our method on both synthetic phantom and experimental data and show that our method is highly efficient in recovering relatively large alignment errors without prior knowledge of a low resolution approximation of the 3D structure or a reasonable estimate of alignment parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2020

The Intrinsic Scatter of the Broad Lines–Narrow Line Correlation in Type I AGN

A correlation between the FWHM of the broad Balmer lines and the narrow [O iii]/H{sub β} line ratio was recently applied to the black hole (BH) mass estimation in type II active galactic nuclei (AGN), where only the narrow lines are visible to the observer. The correlation was initially quantified with type I AGN using stacked spectra, in groups automatically created using a machine-learning algorithm. Such an analysis does not provide information about the intrinsic scatter of the correlation. In addition, it does not necessarily reproduce the true underlying correlation, for example, due to the stacking of spectra with different properties. Testing these two issues requires measurements of individual objects. In this work, we perform such a test by fitting the broad and narrow lines for 8302 type I AGN from the Sloan Digital Sky Survey. Due to the difficulty in reliably measuring the narrow Balmer lines in such objects, which are, in many cases, a small contribution on top of the broad lines, we visually inspect all of the fits and identify 1561 objects with robust measurements. Using these measurements, we find that while a correlation does exist, it shows a large scatter and is not well described by a linear relation. This should be taken into account when using the broad H{sub β} FWHM versus narrow [O iii]/H{sub β} correlation for type II AGN BH mass estimation.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

The updated ITPA global H-mode confinement database: description and analysis

The multi-machine ITPA Global H-mode Confinement Database has been upgraded with new data from JET with the ITER-like wall and ASDEX Upgrade with the full tungsten wall. This paper describes the new database and presents results of regression analysis to estimate the global energy confinement scaling in H-mode plasmas using a standard power law. Various subsets of the database are considered, focusing on type of wall and divertor materials, confinement regime (all H-modes, ELMy H or ELM-free) and ITER-like constraints. Apart from ordinary least squares, two other, robust regression techniques are applied, which take into account uncertainty on all variables. Regression on data from individual devices shows that, generally, the confinement dependence on density and the power degradation are weakest in the fully metallic devices. Using the multi-machine scalings, predictions are made of the confinement time in a standard ELMy H-mode scenario in ITER. The uncertainty on the scaling parameters is discussed with a view to practically useful error bars on the parameters and predictions. One of the derived scalings for ELMy H-modes on an ITER-like subset is studied in particular and compared to the IPB98(y,2) confinement scaling in engineering and dimensionless form. Transformation of this new scaling from engineering variables to dimensionless quantities is shown to result in large error bars on the dimensionless scaling. Regression analysis in the space of dimensionless variables is therefore proposed as an alternative, yielding acceptable estimates for the dimensionless scaling. The new scaling, which is dimensionally correct within the uncertainties, suggests that some dependencies of confinement in the multi- machine database can be reconciled with parameter scans in individual devices. This includes vanishingly small dependence of confinement on line-averaged density and normalized plasma pressure (β), as well as a noticeable, positive dependence on effective atomic mass and plasma triangularity. Extrapolation of this scaling to ITER yields a somewhat lower confinement time compared to the IPB98(y, 2) prediction, possibly related to the considerably weaker dependence on major radius in the new scaling (slightly above linear). Further studies are needed to compare more flexible regression models with the power law used here. In addition, data from more devices concerning possible ‘hidden variables’ could help to determine their influence on confinement, while adding data in sparsely populated areas of the parameter space may contribute to further disentangling some of the global confinement dependencies in tokamak plasmas.

Database↗
DOE OSTI2025

Estimating soybean yields from high-temporal-resolution multi-source data using deep learning

Accurate and timely crop yield prediction is crucial for ensuring food security and maintaining stable agricultural markets. In recent years, there has been a surge in interest in leveraging high-temporal-resolution, multi-source data for effective crop growth monitoring and yield estimation. A notable challenge arises from the difficulty in capturing the intricate interactions between variables across different time steps within these high-temporal-resolution time series datasets. This complexity hinders the reliable extraction of yield information from voluminous and often noisy datasets, especially during periods of extreme weather events. Here, in this study, we propose an Attention and Graph Isomorphism Network-enhanced Bi-directional Long Short-Term Memory network (AGB-LSTM) for estimating county-level soybean yield in the United States. This model integrates a diverse set of remote sensing data, including Near-Infrared Reflectance of Vegetation (NIRv), Sun-Induced chlorophyll Fluorescence (SIF), and Gross Primary Productivity (GPP), along with environmental covariates. The AGB-LSTM effectively leverages information related to crop yield from high-temporal-resolution time series data (5-days), achieving an accuracy of R²= 0.67 and rRMSE = 14.46%. This approach significantly outperforms traditional machine learning methods such as Random Forest (RF) (R²= 0.52, rRMSE = 17.36%) and Bi-LSTM (R²= 0.58, rRMSE = 16.17%). Sensitivity experiments with different time steps and ranges demonstrated that our model could accurately and stably predict yields 1 to 2 months before harvest. Moreover, data with a finer temporal resolution consistently improved prediction performance, resulting in an approximately 20% increase in and an approximately 20% decrease in rRMSE compared to using monthly composites. We also evaluated the robustness of the model under extreme climate events and observed strong performance (R²= 0.50, rRMSE = 21.32%). Finally, yield mapping for major soybean-producing regions in North America in 2023 revealed spatial patterns that closely matched USDA yield reports. Our findings suggest that the AGB-LSTM model is a promising and effective method for estimating yield and has notable potential for global crop yield forecasting.

Deep learning↗
DOE OSTI2022

Neural simulation-based inference approach for characterizing the Galactic Center γ-ray excess

The nature of the Fermi γ-ray Galactic Center Excess (GCE) has remained a persistent mystery for over a decade. Although the excess is broadly compatible with emission expected due to dark matter annihilation, an explanation in terms of a population of unresolved astrophysical point sources e.g., millisecond pulsars, remains viable. The effort to uncover the origin of the GCE is hampered in particular by an incomplete understanding of diffuse emission of Galactic origin. This can lead to spurious features that make it difficult to robustly differentiate smooth emission, as expected for a dark matter origin, from more “clumpy” emission expected from a population of relatively bright, unresolved point sources. Here, we use recent advancements in the field of simulation-based inference, in particular density estimation techniques using normalizing flows, in order to characterize the contribution of modeled components, including unresolved point source populations, to the GCE. Compared to traditional techniques based on the statistical distribution of photon counts, our machine learning-based method is able to utilize more of the information contained in a given model of the Galactic Center emission, and in particular can perform posterior parameter estimation while accounting for pixel-to-pixel spatial correlations in the γ-ray map. This makes the method demonstrably more resilient to certain forms of model misspecification. On application to Fermi data, the method generically attributes a smaller fraction of the GCE flux to unresolved point sources when compared to traditional approaches. We nevertheless infer such a contribution to make up a non-negligible fraction of the GCE across all analysis variations considered, with at least $38^{+9}_{-19}$% of the excess attributed to unresolved point sources in our baseline analysis.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Hybrid Cyber-attack Detection in Photovoltaic Farms

Here, to address the cyber-physical security in PV farms, a hybrid cyber-attack detection is proposed in this manuscript. To secure PV farms, the proposed method integrates model-based and data-driven methods by fusing the detection score at the device and system levels. First, a model-based cyber-attack detection method is developed for each PV inverter. A residual between the estimation of the Kalman filter and measurement is calculated. By leveraging the calculated residual from all inverters, a squared Mahalanobis distance is developed for device detection score generation. At the system level, a convolutional neural network (CNN) is proposed to detect cyber-attack using the waveform data at the point of common coupling (PCC) in PV farms. To improve the CNN detection accuracy, a set of well-designed features are extracted from the raw waveform data. Finally, a weighted detection score fusion method is proposed to combine device and system detection scores by using their complementary strength. The feasibility and robustness of the proposed method are validated by testing cases and a comparative experiment.

14 SOLAR ENERGY↗
DOE OSTI2026

Robust Automatic EXAFS First-Shell Fits

Extended X-ray absorption fine structure (EXAFS) is a widely used technique for atomic structure determination. Fourier transformation connects EXAFS in k space and R space. However, determining the appropriate k-range for the transformation can be challenging, but critical for the first-shell fit. In this study, we present an automatic method to determine the k-range using the Larch package and a Python program. The first step is to estimate spectral noise across a series of k-ranges with a fixed minimum value and identify the optimal maximum value in the k-range (k max ). The k max is determined by an empirical noise threshold that marks the point where the noise level in the Fourier transformed spectrum changes dramatically. Using the obtained k max value, the first shell is modeled to determine the minimum k value (k min ) by optimizing the background function through alignment of the spectrum with theory. The optimal k min corresponds to the point of the minimum R-factor, which quantifies the difference between the experimental and fitted spectrum. Our method was tested on various typical datasets and yielded suitable k-ranges for Fourier transformation and accurate first-shell fits. This approach helps avoid unreliable, irreproducible data analysis, especially for noisy data from diluted samples, and enables robust automatic first-shell EXAFS fitting.

EXAFS analysis↗
DOE OSTI2024

CO 2 storage site characterization using ensemble-based approaches with deep generative models

Estimating spatially distributed properties such as permeability from available sparse measurements is a great challenge in efficient subsurface CO 2 storage operations. In this paper, a deep generative model that can accurately capture complex subsurface structure is tested with an ensemble-based inversion method for accurate and accelerated characterization of CO 2 storage sites. We chose Wasserstein Generative Adversarial Network with Gradient Penalty (WGAN-GP) for its realistic reservoir property representation and Ensemble Smoother with Multiple Data Assimilation (ES-MDA) for its robust data fitting and uncertainty quantification capability. WGAN-GP are trained to generate high-dimensional permeability fields from a low-dimensional latent space and ES-MDA then updates the latent variables by assimilating available measurements. Several subsurface site characterization examples including Gaussian, channelized, and fractured reservoirs are used to evaluate the accuracy and computational efficiency of the proposed method and the main features of the unknown permeability fields are characterized accurately with reliable uncertainty quantification. Furthermore, the estimation performance is compared with a widely-used variational, i.e., optimization-based, inversion approach, and the proposed approach outperforms the variational inversion method in several benchmark cases. We explain such superior performance by visualizing the objective function in the latent space: because of nonlinear and aggressive dimension reduction via generative modeling, the objective function surface becomes extremely complex while the ensemble approximation can smooth out the multi-modal surface during the minimization. This suggests that the ensemble-based approach works well over the variational approach when combined with deep generative models at the cost of forward model runs unless convergence-ensuring modifications are implemented in the variational inversion.

42 ENGINEERING↗
DOE OSTI2026

Magnus method for electronic structure calculations at extreme conditions

We present the application of Magnus based methods to the solution of first order coupled ordinary differential equations in High Energy Density (HED) physics applications. Our focus is on the application to quantum mechanical methods, specifically on the solution of the radial Dirac equation for real and complex energies. HED applications require accurate solutions across a wide range of spatial and energy domains, including regimes where the solutions exhibit pronounced oscillatory behavior. Such cases pose significant computational challenges. We demonstrate that Magnus-based integrators can efficiently and accurately address these challenges. We discuss the implementation of the Magnus method for the solution of the radial Dirac equation, including practical considerations such as the evaluation of matrix exponentials, numerical integration, error estimation, and adaptive step size control. We also discuss the application of these methods to complex energy Green’s function techniques and the efficient approximation of integrals of the solutions relevant to HED electronic structure calculations. Here, we demonstrate the accuracy and robustness of the resulting method in applications to the free-particle case, for which analytic solutions are available for comparison, as well as the challenging case of gold at HED conditions.

general physics↗
DOE OSTI2024

KETCHUP: Parameterizing of large-scale kinetic models using multiple datasets with different reference states

Large-scale kinetic models provide the computational means to dynamically link metabolic reaction fluxes to metabolite concentrations and enzyme levels while also conforming to substrate level regulation. However, the development of broadly applicable frameworks for efficiently and robustly parameterizing models remains a challenge. Challenges arise due to both the heterogeneity, paucity, and difficulty in obtaining flux and/or concentration data but also due to the computational difficulties of the underlying parameter identification problem. Both the computational demands for parameterization, degeneracy of obtained parameter solutions and interpretability of results has so far limited widespread adoption of large-scale kinetic models despite their potential. Herein, we introduce the Kinetic Estimation Tool Capturing Heterogeneous Datasets Using Pyomo (KETCHUP), a flexible parameter estimation tool that leverages a primal-dual interior-point algorithm to solve a nonlinear programming (NLP) problem that identifies a set of parameters capable of recapitulating the (non)steady-state fluxes and concentrations in wild-type and perturbed metabolic networks. KETCHUP is benchmarked against previously parameterized large-scale kinetic models demonstrating an at least an order of magnitude faster convergence than the tool K-FIT while at the same time attaining better data fits. Finally, this versatile toolbox accepts different kinetic descriptions, metabolic fluxes, enzyme levels and metabolite concentrations, under either steady-state or instationary conditions to enable robust kinetic model construction and parameterization. KETCHUP supports the SBML format and can be accessed at https://github.com/maranasgroup/KETCHUP.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Subsurface Nitrogen Dissociation Kinetics in Lithium Metal from Metadynamics

The dissociation of molecular nitrogen in lithium is of interest for several promising technologies, such as the catalytic synthesis of ammonia in ambient or mild conditions. In this work we simulate nitrogen dissociation in the lithium BCC (110) surface at ambient and elevated temperatures using density functional theory (DFT) metadynamics simulations. The rate constants at temperatures of 300, 400, and 500 K are calculated by statistical analysis of the reaction time distributions from the accelerated simulations. This approach finds and estimates rate constants for transition pathways out of the initial state; the required input is the stable initial state and a reasonable choice of collective variable. A single collective variable is used in this case: the N–N distance. The results are robust to changes in metadynamics parameters, and the reaction time distributions follow the expected exponential distribution. We show that the metadynamics-derived rate constants are in agreement with results from the conventional harmonic approximation approach using a climbing image nudged elastic band (NEB) transition state search. The reaction barriers from metadynamics and the NEB/harmonic approximation agree to within 0.02–0.04 eV at all temperatures studied. This paper demonstrates that the harmonic approximation provides an accurate description of the rate constants for nitrogen dissociation in lithium metal, even at temperatures near or above the melting point of lithium, lending credence to previous and future theoretical studies using this approximation. Moreover, this work demonstrates a step toward the automated exploration and discovery of reaction mechanisms and associated rate constants for elementary surface-catalyzed reactions using DFT-based metadynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Data and code for Daily and Multi-Day Extreme Rainfall Analysis Under Future Climates Using Stochastic Storm Transposition and NEX-GDDP-CMIP6 Over CONUS

This data package provides inputs, codes, and outputs for a comprehensive analysis of projected changes in extreme precipitation across 10 regions of the continental United States, using 34 downscaled Earth System Models (ESMs) from the NASA Earth Exchange Global Daily Downscaled Projections, Coupled Model Intercomparison Project Phase 6 (NEX-GDDP-CMIP6) dataset. These models are part of the Coupled Model Intercomparison Project Phase 6 (CMIP6), a coordinated climate modeling framework widely used to assess climate change impacts. The analysis applies a stochastic storm transposition method to quantify changes in extreme rainfall under two Shared Socioeconomic Pathway (SSP) climate scenarios—SSP2-4.5 (moderate emissions) and SSP5-8.5 (high emissions)—compared to historical conditions (1995–2014 vs. 2081–2100). The dataset includes rainfall depth estimates for extreme events with return periods from 2 to 500 years across multiple storm durations (1, 3, and 5 days) for each of the 10 U.S. regions. Weighted ensemble statistics are derived from individual ESM performance against historical precipitation patterns, enabling robust uncertainty quantification through both sign-based and permutation-test-based model agreement assessments. Key analyses address: (1) relative changes in extreme precipitation for each climate scenario, (2) differences between SSP scenarios (SSP5-8.5 vs. SSP2-4.5), (3) contrasts between rare and frequent events, and (4) variations between multi-day and daily storm durations. The workflow produces ensemble statistics—median, 5th, 25th, 75th, and 95th percentiles—along with model agreement metrics that identify regions and event types with robust climate change signals. The dataset includes: processed rainfall depth outputs (netCDF format) from the RainyDay Python package, ESM weights from historical performance evaluation using DayMet observations, ensemble statistics across all storm dimensions, and figures summarizing key findings.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

PetroFit: A Python Package for Computing Petrosian Radii and Fitting Galaxy Light Profiles

PetroFit is an open-source Python package based on Astropy and Photutils that can calculate Petrosian profiles and fit galaxy images. It offers end-to-end tools for making accurate photometric measurements, estimating morphological properties, and fitting 2D models to galaxy images. Petrosian metric radii can be used for model parameter estimation and aperture photometry to provide accurate total fluxes. Correction tools are provided for improving Petrosian radii estimates affected by galaxy morphology. PetroFit also provides tools for sampling Astropy-based models (including custom profiles and multicomponent models) onto image grids and enables point-spread function convolution to account for the effects of seeing. These capabilities provide a robust means of modeling and fitting galaxy light profiles. We have made the PetroFit package publicly available on GitHub (PetroFit/petrofit) and PyPi (pip install petrofit).

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Design and analysis of a wake steering controller with wind direction variability

Wind farm control strategies are being developed to mitigate wake losses in wind farms, increasing energy production. Wake steering is a type of wind farm control in which a wind turbine's yaw position is misaligned from the wind direction, causing its wake to deflect away from downstream turbines. Current modeling tools used to optimize and estimate energy gains from wake steering are designed to represent wakes for fixed wind directions. However, wake steering controllers must operate in dynamic wind conditions and a turbine's yaw position cannot perfectly track changing wind directions. Research has been conducted on robust wake steering control optimized for variable wind directions. In this paper, the design and analysis of a wake steering controller with wind direction variability is presented for a two-turbine array using the FLOw Redirection and Induction in Steady State (FLORIS) control-oriented wake model. First, the authors propose a method for modeling the turbulent and low-frequency components of the wind direction, where the slowly varying wind direction serves as the relevant input to the wake model. Next, we explain a procedure for finding optimal yaw offsets for dynamic wind conditions considering both wind direction and yaw position uncertainty. We then performed simulations with the optimal yaw offsets applied using a realistic yaw offset controller in conjunction with a baseline yaw controller, showing good agreement with the predicted energy gain using the probabilistic model. Using the Gaussian wake model in FLORIS as an example, we compared the performance of yaw offset controllers optimized for static and dynamic wind conditions for different turbine spacings and turbulence intensity values, assuming uniformly distributed wind directions. For a spacing of five rotor diameters and a turbulence intensity of 10 %, robust yaw offsets optimized for variable wind directions yielded an energy gain equivalent to 3.24 % of wake losses recovered, compared to 1.42 % of wake losses recovered with yaw offsets optimized for static wind directions. In general, accounting for wind direction variability in the yaw offset optimization process was found to improve energy production more as the separation distance increased, whereas the relative improvement remained roughly the same for the range of turbulence intensity values considered.

17 WIND ENERGY↗
DOE OSTI2020

Flue Gas Desulfurization Wastewater Composition and Implications for Regulatory and Treatment Train Design

The U.S. Environmental Protection Agency is currently revising its regulations on trace element discharges from flue gas desulfurization (FGD) wastewater.<br>In this work, we expand a predictive model of trace element behavior at coal-fired power plants (CFPPs) to estimate the trace element concentration of FGD wastewater at the plant level. We demonstrate that variation in trace element concentrations in FGD wastewater can span several orders of magnitude and is a function of both coal rank and installed air pollution control devices. This conclusion suggests that the benefits and costs of FGD wastewater treatment for the median plant will poorly describe the actual benefits and costs over the full range of existing CFPPs.

Mauter, Meagan↗
DOE OSTI2024

On the connection between least squares, regularization, and classical shadows

Classical shadows (CS) offer a resource-efficient means to estimate quantum observables, circumventing the need for exhaustive state tomography. Here, we clarify and explore the connection between CS techniques and least squares (LS) and regularized least squares (RLS) methods commonly used in machine learning and data analysis. By formal identification of LS and RLS ``shadows'' completely analogous to those in CS---namely, point estimators calculated from the empirical frequencies of single measurements---we show that both RLS and CS can be viewed as regularizers for the underdetermined regime, replacing the pseudoinverse with invertible alternatives. Through numerical simulations, we evaluate RLS and CS from three distinct angles: the tradeoff in bias and variance, mismatch between the expected and actual measurement distributions, and the interplay between the number of measurements and number of shots per measurement. Compared to CS, RLS attains lower variance at the expense of bias, is robust to distribution mismatch, and is more sensitive to the number of shots for a fixed number of state copies---differences that can be understood from the distinct approaches taken to regularization. Conceptually, our integration of LS, RLS, and CS under a unifying ``shadow'' umbrella aids in advancing the overall picture of CS techniques, while practically our results highlight the tradeoffs intrinsic to these measurement approaches, illuminating the circumstances under which either RLS or CS would be preferred, such as unverified randomness for the former or unbiased estimation for the latter.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Robustness of Deep Learning Classification to Adversarial Input on GPUs: Asynchronous Parallel Accumulation Is a Source of Vulnerability

The ability of machine learning (ML) classification models to resist small, targeted input perturbations—known as adversarial attacks—is a key measure of their safety and reliability. We show that floating-point non associativity (FPNA) coupled with asynchronous parallel programming on GPUs is sufficient to result in misclassification, without any perturbation to the input. Additionally, we show that this misclassification is particularly significant for inputs close to the decision boundary and that standard adversarial robustness results may be overestimated up to 4.6 when not considering machine-level details. We first study a linear classifier, before focusing on standard Graph Neural Network (GNN) architectures and datasets used in robustness assessments. We develop a novel black-box attack using Bayesian optimization to discover external workloads that can change the instruction scheduling which bias the output of reductions on GPUs and reliably lead to misclassification. Motivated by these results, we present a new learnable permutation (LP) gradient-based approach to learning floating-point operation orderings that lead to misclassifications. The LP approach provides a worst-case estimate in a computationally efficient manner, avoiding the need to run identical experiments tens of thousands of times over a potentially large set of possible GPU states or architectures. Finally, using instrumentation-based testing, we investigate parallel reduction ordering across different GPU architectures under external background workloads, when utilizing multi-GPU virtualization, and when applying power capping. Our results demonstrate that parallel reduction ordering varies significantly across architectures under the first two conditions, substantially increasing the search space required to fully test the effects of this parallel scheduler-based vulnerability. These results and the methods developed here can help to include machine-level considerations into adversarial robustness assessments, which can make a difference in safety and mission critical applications.

Shanmugavelu, Sanjif [Maxeler Technologies, a Groq↗
DOE OSTI2024

Deep-Learning-derived Boundary Layer Height from Meteorological Data over the SGP, GOAMAZON, CACTI

The planetary boundary-layer (PBL) height (PBLH) is an important parameter for various meteorological and climate studies. This study presents a multi-structure deep neural network (DNN) model, designed to estimate PBLH by integrating morning temperature profiles with surface meteorological observations. The DNN model is developed by leveraging a rich data set of PBLH derived from long-standing radiosonde records and augmented with high-resolution micropulse lidar and Doppler lidar observations. We access the performance of the DNN with an ensemble of 10 members, each featuring distinct hidden layer structures, which collectively yield a robust 27-year PBLH data set over the Southern Great Plains from 1994 to 2020. The influence of various meteorological factors on PBLH is rigorously analyzed through the importance test. Moreover, the DNN model's accuracy is evaluated against radiosonde observations and juxtaposed with conventional remote-sensing methodologies, including Doppler lidar, ceilometer, Raman lidar, and micropulse lidar. The DNN model exhibits reliable performance across diverse conditions and demonstrates lower biases relative to remote-sensing methods. In addition, the DNN model, originally trained over a plain region, demonstrates remarkable adaptability when applied to the heterogeneous terrains and climates encountered during the GoAmazon (tropical rainforest) and CACTI (middle-latitude mountain) campaigns. These findings demonstrate the effectiveness of deep learning models in estimating PBLH, enhancing our understanding of boundary-layer dynamics with implications for enhancing the representation of PBL in weather forecasting and climate modeling.

54 ENVIRONMENTAL SCIENCES↗