SEARCH · Engineering Papers

Results for “reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2015

Operational constraints and strategies for systems to effect the sustainable, solar-driven reduction of atmospheric CO 2

The operational constraints for a 6-electron/6-proton CO 2 reduction system that operates at the concentration of CO 2 in the current atmosphere (p CO 2 = 400 ppm) have been evaluated on a variety of scale lengths that span from laboratory scale to global scale. Due to the low concentration of CO 2 in the atmosphere, limitations due to mass transport of CO 2 from the tropopause have been evaluated through five different regions, each with different characteristic length scales: the troposphere; the atmospheric boundary layer (ABL); the canopy layer; a membrane layer; and an aqueous electrolyte layer. The resulting CO 2 conductances, and associated physical transport limitations, will set the ultimate limit on the efficiency and areal requirements of a sustainable solar-driven CO 2 reduction system regardless of the activity or selectivity of catalysts for reduction of CO 2 at the molecular level. At the electrolyte/electrode interface, the steady-state limiting current density and the concomitant voltage loss associated with the CO 2 concentration overpotential in a one-dimensional solar-driven CO 2 reduction cell have been assessed quantitatively using a mathematical model that accounts for diffusion, migration and convective transport, as well as for bulk electrochemical reactions in the electrolyte. At p CO 2 = 400 ppm, the low diffusion coefficient combined with the low solubility of CO 2 in aqueous solutions constrains the steady-state limiting current density to <0.1 mA cm -2 in a typical electrochemical cell with natural convection and employing electrolytes with a range of pH values. Hence, in such a system, the CO 2 capture area must be 100- to 1000-fold larger than the solar photon collection area to enable a >10% efficient solar-driven CO 2 reduction system (based on the solar collection area). This flux limitation is consistent with estimates of oceanic CO 2 uptake fluxes that have been developed in conjunction with carbon-cycle analyses for use in coupled atmosphere/ocean general circulation models. Two strategies to improve the feasibility of obtaining efficient and sustainable CO 2 transport to a cathode surface at p CO 2 = 400 ppm are described and modeled quantitatively. The first strategy employs yet unknown catalysts, analogous to carbonic anhydrases, that dramatically accelerate the chemically enhanced CO 2 transport in the aqueous electrolyte layer by enhancing the acid–base reactions in a bicarbonate buffer system. The rapid interconversion from bicarbonate to CO 2 in the presence of such catalysts near the cathode surface would in principle yield significant increases in the steady-state limiting current density and allow for >10% solar-fuel operation at the cell level. The second strategy employs a thin-layer cell architecture to improve the diffusive transport of CO 2 by use of an ultrathin polymeric membrane electrolyte. Rapid equilibration of CO 2 at the gas/electrolyte interface, and significantly enhanced diffusive fluxes of CO 2 in electrolytes, are required to increase the steady-state limiting current density of such a system. This latter approach however only is feasible for gaseous products, because liquid products would coat the electrode and therefore thicken the hydrodynamic boundary layer and accordingly reduce the diffusive CO 2 flux to the electrode surface. Regardless of whether the limitations due to mass transport to the electrode surface are overcome on the laboratory scale, at global scales the ultimate CO 2 flux limitations will be dictated by mass transport considerations related to transport of atmospheric CO 2 to the boundary plane of the solar-driven reactor system. The transport of CO 2 across the troposphere/ABL interface, the ABL/canopy layer interface, and the canopy layer/electrolyte interface have therefore been assessed in this work, to provide upper bounds on the ultimate limits for the solar-to-fuel (STF) conversion efficiency for systems that are intended to effect the reduction of atmospheric CO 2 in a sustainable fashion at global scale.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2015

Uranium isotopes fingerprint biotic reduction

Knowledge of paleo-redox conditions in the Earth’s history provides a window into events that shaped the evolution of life on our planet. The role of microbial activity in paleo-redox processes remains unexplored due to the inability to discriminate biotic from abiotic redox transformations in the rock record. The ability to deconvolute these two processes would provide a means to identify environmental niches in which microbial activity was prevalent at a specific time in paleo-history and to correlate specific biogeochemical events with the corresponding microbial metabolism. Here, we demonstrate that the isotopic signature associated with microbial reduction of hexavalent uranium (U), i.e., the accumulation of the heavy isotope in the U(IV) phase, is readily distinguishable from that generated by abiotic uranium reduction in laboratory experiments. Thus, isotope signatures preserved in the geologic record through the reductive precipitation of uranium may provide the sought-after tool to probe for biotic processes. Because uranium is a common element in the Earth’s crust and a wide variety of metabolic groups of microorganisms catalyze the biological reduction of U(VI), this tool is applicable to a multiplicity of geological epochs and terrestrial environments. The findings of this study indicate that biological activity contributed to the formation of many authigenic U deposits, including sandstone U deposits of various ages, as well as modern, Cretaceous, and Archean black shales. In addition, engineered bioremediation activities also exhibit a biotic signature, suggesting that, although multiple pathways may be involved in the reduction, direct enzymatic reduction contributes substantially to the immobilization of uranium.

58 GEOSCIENCES↗

DOE OSTI2023

Fast Response of East Asian Precipitation in June 2020 to Local and Remote Aerosol Emission Reductions during COVID-19

Here, in this study, the fast response of East Asian summer precipitation to COVID-19–induced aerosol emission reductions is examined using the Community Earth System Model, version 2.2 (CESM2.2). The emission reductions decreased aerosol optical depth and cloud cover over northern China in June 2020. The troposphere became warmer, strengthening the land–sea thermal contrast and anomalous southerly winds. The subtropical westerly jet accelerated and shifted southward, favoring low-level convergence, upward air motions, and subsequent condensational heating over the Yangtze River basin (YRB). The feedback of condensational heating in return strengthened the convergence and ascent. The western North Pacific subtropical high was intensified, which further enhanced the moisture advection and convergence over the YRB. Both the enhanced moisture convergence and ascent increased precipitation over the YRB during June 2020. Furthermore, local and remote emission reductions show different impacts on convection and moisture transport over the YRB. The emission reductions over China caused stronger convective precipitation (1.15 vs 0.63 mm day −1 ) but weaker larger-scale precipitation (1.17 vs 2.24 mm day −1 ) than the emission reductions outside China. In addition to the emission reductions, the sea surface temperature (SST) anomalies in 2020 also play an important role in increasing precipitation over the YRB, contributing about 42.8%. The relative contribution of SST anomalies also increases under the COVID-19–induced emission scenario.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2018

Electrolytic Oxide Reduction of Plutonium Oxide Surrogates

Our research team has investigated electrolytic oxide reduction (EOR) as an improved metal production process versus the currently employed multiple cycle direct oxide reduction (MCDOR) process for the conversion of plutonium oxide to plutonium metal. Inherent advantages in safety, waste generation, efficiency, and operational ease make EOR an attractive alternative to traditional metal production practices. Phase I of the project consisted of the construction of a prototype electrochemical cell, and proof of concept experiments towards the reduction of SnO 2 and CeO 2 compounds. Phase II of the project was focused on the optimization of the cerium system in preparation for future plutonium EOR experiments. We observed the electrolytic reduction of cerium oxide resulting in mixed degrees of success, and discovered this was a result of parasitic side reactions and partial reduction. We employed cyclic voltammetry (CV) to identify the products of these side reactions and characterize partially reduced species. We also observed that, when metal was successfully produced by EOR, a large amount of passed charge was required. We concluded that this observation was due to several inefficiencies of the process relating to the reduction mechanism (e.g. inefficient use of cathodically produced calcium). We used our CV results to guide our optimization of the EOR of CeO 2 by refining our electrochemical method, cell geometry, and materials of construction. Finally, we developed a next generation cell, worked to establish a new molten salt electrochemical capability in the Plutonium Facility, and completed a strategy for plutonium experiments. Our electrochemical method to produce plutonium metal clearly supports the core mission of the laboratory. Furthermore, this project has allowed for the development of capabilities that will provide valuable data to programs interested in characterization and detection, as well as science of signatures. Additionally, establishing this capability in the plutonium facility will facilitate future safeguard studies that can assist with safeguard development in molten salt reprocessing flowsheets, and molten salt reactor designs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Adoption of Plug-in Electric Vehicles: Local Fuel Use and Greenhouse Gas Emissions Reductions Across the U.S.

The dependence on gasoline-powered light-duty automobiles has made U.S. households vulnerable to the burden of fuel costs. Tailpipe emissions from these vehicles constitute 58% of greenhouse gas (GHG) emissions in the U.S., which are damaging to the environment (EPA, 2023). The adoption of plug-in electric vehicles (PEVs) has been shown to effectively reduce fuel costs and GHG emissions. However, local effects on these benefits are not well understood by American consumers, potentially limiting adoption and therefore the realization of PEV benefits at scale (MacInnis & Krosnick, 2020; EY Americas, 2023). To fill this research gap, this study estimates the fuel cost savings and GHG emission reductions at the state and ZIP code levels by considering local fuel prices, vehicle class preference, average vehicle model year, fuel efficiencies, and driving intensities. The study's findings reveal that the adoption of PEVs can yield substantial benefits in terms of fuel cost savings and GHG emission reductions nationwide. Specifically, driving a battery electric vehicle (BEV) is estimated to result in annual savings of up to $\$2,200$, while driving a plug-in hybrid electric vehicle (PHEV) can lead to savings up to $\$1,500$, when compared to an internal combustion engine vehicle (ICEV) of equivalent size. Moreover, using population-weighted averages by ZIP code, BEVs and PHEVs show the potential to save 400 and 200 grams of carbon dioxide equivalent per mile, respectively, compared to a representative ICEV of the same class. The magnitude of fuel cost savings and emissions reduction vary by region due to various factors. Generally, regions with high gasoline prices, low electricity prices, preferences for larger vehicles, and high driving intensities tend to see relatively large fuel savings. The emissions reductions are more pronounced in areas with clean grids where consumer preferences lie with large vehicles. This regional variability underscores the importance of considering local contextual factors when assessing the potential benefits of PEV adoption. In more than 99% of U.S. ZIP codes, PEVs result in overall savings in fuel use (and subsequent costs) and GHG emissions. While not a central focus of this analysis, reductions in GHG tailpipe emissions from PEV adoption would also come with reductions in criteria pollutant emissions, contributing to improved local air quality depending on the PEV penetration, population density, and electricity generation infrastructure in the locality.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2022

Realistic Estimation of CO2 Emission Reductions Due to Building Retrofit

Constant CO2 emission factors of electricity are often used to study the emissions of buildings. However, in the era of increased renewable energy for power generation, emission factors of electricity are dynamically changing. This study is to investigate the impact of dynamic CO2 emission factors, which are more realistic than constant ones, on the emission reductions due to building retrofits. The results reveal that if dynamic CO2 emission factors are used for U.S. medium office buildings, improving the efficiency of lighting or electric equipment will lead to more emission reductions in locations with high wind power penetration (e.g., 12% more reductions in Rochester) and fewer reductions in locations with high solar power penetration (e.g., 8% fewer reductions in San Diego). As for improving envelope insulation, dynamic CO2 emission factors have more impact on the emission reductions in hot climates than in cold climates.

Lou, Yingli↗

DOE OSTI2022

Diesel-Range Fuel Property Effects on Medium-Duty Advanced Compression Ignition for Low-Load NO X Reduction

A diesel premixed-charge compression ignition (PCCI) technique was used at low loads at which exhaust temperature makes urea-selective catalytic reduction (SCR) use for nitrogen oxides (NOx) reduction challenging. A fuels matrix to examine the effects of increasing fuel volatility, bio-blendstocks, and cetane number on PCCI was formulated using a near-constant 15% aromatic content. The results showed that PCCI could provide greater than 67% NOx emissions reductions at 1,200 RPM, 3.1 bar indicated mean effective pressure (IMEP), and 2.0 bar IMEP. The filter smoke number (FSN) could also be reduced relative to a conventional diesel combustion (CDC) baseline. The reductions in FSN were more moderate in the order of 40-50%, depending upon the fuel used, IMEP, and combustion phasing (CA50) timing. Hydrocarbon (HC) emissions could be held to a marginally lower level than CDC emissions at some CA50 conditions by using higher-volatility and higher cetane number fuels and could potentially be traded for further NOx reductions. This outcome is important as it points to the possibility of achieving significant NOx reduction while doing no harm in terms of HC emissions. Carbon monoxide (CO) emissions increased in PCCI, but increasing the fuel volatility and cetane number could be helpful in keeping these emissions at a manageable level.

02 PETROLEUM↗

NASA NTRS1978

The cost of applying current helicopter external noise reduction methods while maintaining realistic vehicle performance

Analytical methods were developed and/or adopted for calculating helicopter component noise, and these methods were incorporated into a unified total vehicle noise calculation model. Analytical methods were also developed for calculating the effects of noise reduction methodology on helicopter design, performance, and cost. These methods were used to calculate changes in noise, design, performance, and cost due to the incorporation of engine and main rotor noise reduction methods. All noise reduction techniques were evaluated in the context of an established mission performance criterion which included consideration of hovering ceiling, forward flight range/speed/payload, and rotor stall margin. The results indicate that small, but meaningful, reductions in helicopter noise can be obtained by treating the turbine engine exhaust duct. Furthermore, these reductions do not result in excessive life cycle cost penalties. Currently available main rotor noise reduction methodology, however, is shown to be inadequate and excessively costly.

Bowes, M. A.↗

NASA NTRS1979

The effect of oblique angle of sound incidence, realistic edge conditions, curvature and in-plane panel stresses on the noise reduction characteristics of general aviation type panels

Experiments and a theoretical analysis were conducted to predict the noise reduction of inclined and curved panels. These predictions are compared to the experimental results with reasonable agreement between theory and experiment for panels under an oblique angle of sound incidence. Theoretical as well as experimental results indicate a big increase in noise reduction when a flat test panel is curved. Further curving the panel slightly decreases the noise reduction. Riveted flat panels are shown to give a higher noise reduction in the stiffness-controlled frequency region, while bonded panels are superior in this region when the test panel is curved. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial in-plane stresses are presented and discussed. These test results indicate an important improvement in the noise reduction of these panels in the frequency range below the fundamental panel/cavity frequency.

Grosveld, F.↗

NASA NTRS1981

Recent advances in reduction methods for nonlinear problems

Status and some recent developments in the application of reduction methods to nonlinear structural mechanics problems are summarized. The aspects of reduction methods discussed herein include: (1) selection of basis vectors in nonlinear static and dynamic problems, (2) application of reduction methods in nonlinear static analysis of structures subjected to prescribed edge displacements, and (3) use of reduction methods in conjunction with mixed finite element models. Numerical examples are presented to demonstrate the effectiveness of reduction methods in nonlinear problems. Also, a number of research areas which have high potential for application of reduction methods are identified.

Noor, A. K.↗

NASA NTRS1981

Experimental study of noise reduction for an unstiffened cylindrical model of an airplane fuselage

Noise reduction measurements were made for a simplified model of an airplane fuselage consisting of an unstiffened aluminum cylinder 0.5 m in diameter by 1.2 m long with a 1.6-mm-thick wall. Noise reduction was first measured with a reverberant field pink-noise load on the cylinder exterior. Next, noise reduction was measured by using a propeller to provide a more realistic noise load on the cylinder. Structural resonance frequencies and acoustic reverberation times for the cylinder interior volume were also measured. Comparison of data from the relatively simple test using reverberant-field noise with data from the more complex propeller-noise tests indicates some similarity in both the overall noise reduction and the spectral distribution. However, all of the test parameters investigated (propeller speed, blade pitch, and tip clearance) had some effect on the noise-reduction spectra. Thus, the amount of noise reduction achieved appears to be somewhat dependent upon the spectral and spatial characteristics of the flight conditions. Information is also presented on cyclinder resonance frequencies, damping, and characteristics of propeller-noise loads.

Willis, C. M.↗

NASA NTRS1981

A research program to reduce interior noise in general aviation airplanes. Influence of depressurization and damping material on the noise reduction characteristics of flat and curved stiffened panels

Some 20 x 20 aluminum panels were studied in a frequency range from 20 Hz to 5000 Hz. The noise sources used were a swept sine wave generator and a random noise generator. The effect of noise source was found to be negligible. Increasing the pressure differential across the panel gave better noise reduction below the fundamental resonance frequency due to an increase in stiffness. The largest increase occurred in the first 1 psi pressure differential. The curved, stiffened panel exhibited similar behavior, but with a lower increase of low frequency noise reduction. Depressurization on these panels resulted in decreased noise reduction at higher frequencies. The effect of damping tapes on the overall noise reduction values of the test specimens was small away from the resonance frequency. In the mass-law region, a slight and proportional improvement in noise reduction was observed by adding damping material. Adding sound absorbtion material to a panel with damping material beneficially increased noise reduction at high frequencies.

Navaneethan, R.↗

NASA NTRS1982

Noise reduction experience at Hughes Helicopter, Inc.

Noise reduction is mostly limited to light helicopters whose noise signature is dominated by their tail rotors. It is primarily hardware oriented. Well known noise reduction techniques such as reduction of rotor speeds with an accompanying increase in solidity to maintain performance, engine noise reduction with the use of exhaust mufflers, and acoustic blanketing of transmission and engine compartment are used. The concept of blade phasing as a means of reducing tail rotor noise is also used. Engine noise (exhaust noise), power train noise and airframe noise becomes important at low rotor tip speeds and means must be found to reduce these noise sources if further noise reductions are desired. The use of a special test rig aids in isolating the various noise sources and arriving at the penalties (performance or payload) involved in quieting them. Significant noise reduction are achieved for the light helicopter with minimum performance or weight penalties because of the dominance of a single noise source (the tail rotor).

D S Janakiram↗

NASA NTRS1987

Equivalent beam modeling using numerical reduction techniques

Numerical procedures that can accomplish model reductions for space trusses were developed. Three techniques are presented that can be implemented using current capabilities within NASTRAN. The proposed techniques accomplish their model reductions numerically through use of NASTRAN structural analyses and as such are termed numerical in contrast to the previously developed analytical techniques. Numerical procedures are developed that permit reductions of large truss models containing full modeling detail of the truss and its joints. Three techniques are presented that accomplish these model reductions with various levels of structural accuracy. These numerical techniques are designated as equivalent beam, truss element reduction, and post-assembly reduction methods. These techniques are discussed in detail.

Chapman, J. M.↗

NASA NTRS1986

On model reduction

Three model reduction methods are described. These are the discrete balanced realizations of Mullis and Roberts (1976) where a characterization of the reduction error is given and a previously unknown L(infinity) norm bound on the reduction error, is obtained. Another method is a new model reduction technique for discrete time systems which has the advantage that the reduced order model is balanced and has an L(infinity) norm bound on the reduction error. The last method derived is a frequency weighting technique for continuous and discrete systems where it is possible to specify the approximation accuracy with frequency and also, for this method, an L(infinity) norm on the weighted reduction error is obtained.

Al-Saggaf, Ubaid M.↗

NASA NTRS1989

Model reduction for flexible spacecraft with clustered natural frequencies

Two approaches to the problem of model reduction for flexible spacecraft that have proved very useful are balancing and model truncation. Furthermore, it is well known that a model representation of a lightly damped flexible structure with widely spaced natural frequencies is approximately balanced. Consequently, reduction in either coordinate system gives similar results for this case. It is important to note, however, that flexible space structures typically have clusters of closely spaced frequencies. In such cases, reduction in model coordinates can give large errors, while the error obtained using balancing is generally much smaller. A new reduction procedure which combines the best features of model and balanced reduction is therefore developed. It is more efficient than balanced reduction of the full system, as it only involves balancing those subsystems of close modes that are highly correlated, yet is shown to yield results which are essentially as good.

Williams, T. W. C.↗

NASA NTRS1991

Aerobic sulfate reduction in microbial mats

Measurements of bacterial sulfate reduction and dissolved oxygen (O2) in hypersaline bacterial mats from Baja California, Mexico, revealed that sulfate reduction occurred consistently within the well-oxygenated photosynthetic zone of the mats. This evidence that dissimilatory sulfate reduction can occur in the presence of O2 challenges the conventional view that sulfate reduction is a strictly anaerobic process. At constant temperature, the rates of sulfate reduction in oxygenated mats during daytime were similar to rates in anoxic mats at night: thus, during a 24-hour cycle, variations in light and O2 have little effect on rates of sulfate reduction in these mats.

Canfield, Donald E.↗

NASA NTRS1990

Model reduction for flexible structures

Several conditions for a near-optimal reduction of general dynamic systems are presented focusing on the reduction in balanced and modal coordinates. It is shown that model and balanced reductions give very different results for the flexible structure with closely-spaced natural frequencies. In general, balanced reduction is found to give better results. A robust model reduction technique was developed to study the sensitivity of modeling error to variations in the damping of a structure. New concepts of grammians defined over a finite time and/or a frequency interval are proposed including computational procedures for evaluating them. Application of the model reduction technique to these grammians is considered to lead to a near-optimal reduced model which closely reproduces the full system output in the time and/or frequency interval.

Gawronski, Wodek↗