Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “progress report”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Plasma Surface Interactions: Bridging from the Surface to the Micron Frontier through Leadership Class Computing (Final Technical Progress Report)

The performance demands on plasma-facing components (PFCs) in future fusion power plants are beyond the capability of current materials. In defining the plasma-surface interaction (PSI), it is evident that three coupled spatial regions influence PFC materials evolution and performance. These regions consist of (1) the edge and scrape-off layer region of the plasma, (2) the near-surface material response to extreme thermal and particle fluxes under the influence of, and feedback to, the plasma sheath, and (3) the structural material’s response to an intense, 14 MeV peaked neutron spectrum, which produces very high concentrations of transmuted elements through (n,p) and (n,α) reactions and structural material property degradation. The objective of this project is to develop and deploy validated, high-performance simulation tools capable of predicting the performance of tungsten-based plasma-facing components (PFCs) in a burning fusion plasma environment, which includes modeling surface morphology evolution in either erosion or re-deposition regimes, and the recycling of hydrogen species. This requires the development of a leadership-scale computational code to predict PFC behavior that is well integrated to a suite of multiscale modeling techniques to bridge the scales needed to address complex physical and computational issues at the plasma surface interface and the transition region below the surface where neutron damage processes in the bulk dominate material behavior. Successful completion of this project will provide PFC simulation tools to evaluate steady-state performance of tungsten-based PFC and divertor components in burning plasma environments. This will enable the identification of critical experiments to confirm whether practical PFC solutions exist for magnetic fusion energy beyond ITER. More specifically, the research activities within this project focus on two broadly defined research thrusts: 1) Developing a new simulation code, Xolotl-PSI to predict PFC operating lifetime and performance, that is specifically designed to take advantage of leadership class computing facilities; and 2) Integrating and applying discrete particle-based, as well as continuum-based, multiscale modeling techniques to provide scientific discovery of the mechanisms controlling PFC and bulk materials evolution under fusion plasma and 14-MeV neutron exposure; in this thrust, the challenge of scale-bridging between atomistic/microstructural modeling and the continuum-scale of PFC device performance is achieved through multiscale modeling techniques. Throughout the grant period, research at UMass Amherst focused on the atomic-scale analysis of the dynamics and kinetics (transport and reactions) of small mobile helium clusters near surfaces and grain boundaries in plasma-exposed tungsten, as well as the proper parameterization and incorporation of these processes into our SciDAC team’s continuum-level cluster dynamics code (Xolotl). Our work also included characterization of large-scale molecular-dynamics (MD) simulation results of helium implantation into tungsten based on the findings of our analysis and comparisons of Xolotl simulation predictions with the large-scale MD simulation results for Xolotl validation purposes; emphasis was placed on the impact of helium cluster dynamics/kinetics on tungsten surface morphology, near-surface tungsten structure, and helium retention. Furthermore, our work included initiation of a research program on evaluating the impact of structural defects in tungsten due to plasma exposure (such as helium nanobubbles) on tungsten’s thermophysical properties, focusing on lattice thermal conductivity. Our studies contributed to a fundamental understanding of the effects of plasma-surface interactions on the dynamical response of plasma-facing materials in nuclear fusion devices and the development of predictive hierarchical multiscale computational tools for the quantitative description of the material’s dynamical response to plasma exposure.

36 MATERIALS SCIENCE↗

CarbonSAFE Phase I: Integrated CCS Pre-Feasibility – Northwest Gulf of Mexico (Final Research Performance Progress Report)

Offshore storage achieves two major objectives for the US commercial large scale CCS deployment: 1. Adding large capacity to serve local regional, and potentially broader objectives 2. Lowering risk by providing storage with one public owner, away from population, with no conflict with water resources and reduced concern about induced seismicity. A high-concentration CO 2 source was identified as the top candidate for the project and going forward with the CarbonSAFE Phase II proposal. The top-rated source is the NET Power facility in Houston (La Porte), Texas. A manuscript based on analysis of results from the two-stage survey conducted in eight selected Texas counties was submitted to the International Journal of Greenhouse Gas Control on August 21, 2018. A primary confining interval (seal) is associated with MFS9 (biochronozone Amphistegina B) which can reach a thickness of up to 250 m. However, the Amphistegina B confining interval thins considerably in the onshore direction. Consequently, the most suitable portion of the Miocene section for future CO 2 sequestration in the study area is considered to be the offshore area where Amphistegina B is thickest. Based on three models for capacity assessment, the study proposes a base case for the High Island 10-L Field in which 9 wells operated for 12 years each completed into 4 zones will emplace a total of 150MMT of CO 2 with wells placed in the water leg where all the plume will slowly migrate into the structural trap is feasible in terms of geology and engineering. The 10-L Field was assessed in more detail than other examined oil and gas fields in the study area in order to look at some specifics about how initial future CCS projects might be accomplished in the favorable GoM of the US region and expand the sites to a larger set to experiment with matching all the possible sources to sinks. The 10-L site is large enough to accept CO 2 from multiple sinks; the expanded sinks are estimated to be large enough to accept all the CO 2 from the region plus some from outside the region. A number of uncertainties were identified. The largest and most consequential uncertainty is the cost of offshore pipelines in the study setting, which impacts the conditions where CO 2 transport would be by ship versus the cases where pipeline would be preferred. Ships are preferred for small volumes and short durations; pipelines for larger volumes and long duration. Additional work is needed to advance the maturity of multiple sinks available, to continue outreach to industries and the public, and to develop realistic source opportunities. The study demonstrates that industrial source clusters connected to a transport hub delivering CO 2 to a nearby storage complex is the most cost-effective and improved way to de-carbonize industrial activities, particularly, in an expected low-carbon and increasing carbon price environmental. The feasibility of the new business models should be based on the best use of the existing infrastructure and strategically build on new supporting infrastructure to drive down the costs of large-scale CCS deployment. Assessing the pre-feasibility of the commercial implementation of a CCS cluster and hub in the GoM energy ecosystem, our study links these elements successfully through an optimized combination (minimum cost) of CO 2 sources on land with offshore storage. Offshore storage achieves two major objectives for the US commercial large scale CCS deployment: 1. Adding large capacity to serve local regional, and potentially broader objectives 2. Lowering risk by providing storage with one public owner, away from population, with no conflict with water resources and reduced concern about induced seismicity.

54 ENVIRONMENTAL SCIENCES↗

Building America Research Dissemination (FY 2018 Annual Progress Report)

This report documents additions and upgrades to the Building America Solution Center, https://basc.pnnl.gov, a web-based resource developed and maintained by the Pacific Northwest National Laboratory for the U.S. Department of Energy’s Building Technology Office. The Building America Solution Center makes research funded by DOE through its Building America program more readily accessible and easily searchable by members of the residential building and remodeling community, including builders, contractors, installers, remodelers, code officials, raters, manufacturers, sales professionals, and building science researchers. This report fulfills 1.5.2.75 PNNL - Building America Research Dissemination, Milestone 4, "Prepare an annual summary of significant platform maintenance activities and all content uploaded to the BASC site (Tasks 1 & 2)."

42 ENGINEERING↗

FY 2017 Progress Report on the Argonne Sodium Draining and Refilling Experiments

The main incentive for utilization of compact diffusion-bonded sodium-to-CO 2 heat exchangers for a Sodium-Cooled Fast Reactor (SFR) with a supercritical carbon dioxide ( s CO 2 ) Brayton cycle power converter is the potential for reduction in heat exchanger size and cost relative to traditional shell-and-tube technology. There is an incentive for the designer to reduce the width of the sodium and CO 2 channels as much as possible to realize the greatest size and cost reductions. However, there are practical limits on minimum channel size due to fundamental phenomena particular to sodium and CO 2 . One is that the channel size must be large enough to enable the rapid draining of sodium from the heat exchanger sodium channels in the event that a sodium leak is detected in an intermediate sodium heat transport system loop, in order to rapidly drain the sodium into the loop sodium storage vessel/tank and thereby limit the sodium mass released that could potentially burn if exposed to air. Information about the minimum sodium channel size can only be obtained by actually draining sodium from representative wetted stainless steel sodium channels under prototypical conditions. It is not possible to obtain such information through modeling and simulation or through simulant experiments. The ANL Sodium Draining and Refilling experiment facility has been designed and is being assembled to obtain data on the draining of sodium from compact diffusion-bonded sodium-to-carbon dioxide heat exchanger sodium channels including the mass of sodium drained versus time, the mass of sodium retained inside of the channels, and the potential for sodium to bridge the channel, freeze, and form a plug inside the channel versus the channel size. This information is needed to determine the minimum sodium channel size required to meet the requirements for sodium draining without bridges being left inside of the channels. Initial shakedown testing has been initiated using water and glass and plastic tubes before transitioning to sodium and stainless steel test sections. For the latter, the test sections will be heated to high temperature to promote rapid sodium wetting of the stainless steel prior to draining. Testing with sodium will be initiated in FY 2018.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Nuclear Hybrid Energy Systems South East Regional Case Progress Report

This report discusses ongoing work to develop and evolve the modeling framework for evaluating nuclear hybrid energy systems (NHES) from a dynamic performance and cost perspective. A high-level multi-tiered steam header/turbine step-down system used in many chemical plants is coupled with a multi-modular nuclear reactor facility, representative of potential NHES deployment scenarios in the south eastern United States, to begin to demonstrate the feasibility of these hybrid systems in the market. The preliminary results of this system for three different scenarios is presented and future work is discussed

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Quarterly Progress Report Q1 FY2019 Oct-Dec 2018 for Gamma-ray mirrors project

Our main activity this quarter was focused on scheduling and preparing for the experiment at the Irradiated Fuel Examination Laboratory (IFEL) at ORNL in order to “Carry out the experimental campaign with the three-mirror system” in the second quarter of FY19 as described in Phase 1/Task 1/Task1.1. Access to the IFEL beam port was finalized in December and the experiment is scheduled from January 22 to February 1st 2019. We are on track to complete our first technical milestone by the end of the second quarter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Monitoring of Actinide Concentrations in Molten LiCl-KCl Salt using Alpha Spectroscopy: Final Progress Report

This project addresses the need for real time monitoring of actinide concentrations for spent fuel reprocessing utilizing alpha spectroscopy. This project specifically focuses on spent fuel reprocessing with the pyroprocessing technique that uses high temperature molten salt. Pyroprocessing uses molten salt such as lithium chloride and potassium chloride to separate out uranium and plutonium from spent fuel. To prevent any possible diversion of high purity plutonium in this process, monitoring of the actinide concentrations within the refinery are essential for safeguards and non-proliferation efforts. Alpha spectroscopy enables the identification and quantification of actinide isotopic concentrations. However, current assay methods involving intrusive sampling and ex-suit measurement require weeks to provide accurate information. A near real-time and in-situ measurement system is required to quickly quantify actinide isotopic concentrations within the salt. Semiconductor radiation detectors provide a compact, high energy resolution option for completing these measurement needs. Silicon carbide (SiC) has been shown to operate effectively at high temperatures and high chemical stability in the molten salt environment. 4H-SiC Schottky diode alpha particle detectors were fabricated and tested to determine their alpha spectroscopy capabilities. The detectors need to operate at the elevated temperatures, survive the molten salt environment, be radiation hard, and have sufficient energy resolution under all these conditions to determine isotopic concentrations. Along with the detector, a method of producing samples of the actinides in the salt is required. To produce a thin film of the actinides on the detector, which is a necessity for alpha spectroscopy, electrodeposition can be used. Electrodeposition uses an electric potential difference to selectively deposit uranium or other actinides from the salt using an anode and cathode. Deposition of the material directly onto the sensor would produce a thin film of material that would enable materials accountability measurements to be taken in real time.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Research Performance Progress Report - DOE Solar Program, Soft Costs, National Lab Projects: Promotion of PV Soft Cost Reductions in the Southeastern US

Beginning in 2014, the installed solar capacity in South Carolina (SC) grew from less than 20 megawatts to more than 300 megawatts today. Concurrently, the number of customer-sited, load-centered solar generation is expected to grow from less than 500 statewide to as many as 10,000 by 2021. This growth is the direct result of a landmark state policy initiative, Act 236, passed by the South Carolina General Assembly and signed into law by the Governor in June of 2014. Today, local policy makers in South Carolina are ill-equipped to handle the onslaught of solar permitting and zoning requests expected to come with such quick growth of an emerging market. Similarly, the state’s building inspectors, first responders, and tax assessors know little about photovoltaic (PV) technology and best practices. Finally, South Carolina’s workforce and workforce trainers continue to be underprepared to benefit from the tremendous opportunity created by the passage of Act 236. Each of these deficits in knowledge of and preparedness for solar PV translates into higher “soft costs” of installed solar PV in South Carolina.

14 SOLAR ENERGY↗

Battery Testing FY 2017 Annual Progress Report

Abuse tests are designed to determine the safe operating limits of HEV\PHEV energy storage devices. Testing is intended to achieve certain worst-case scenarios to yield quantitative data on cell\module\pack response, allowing for failure mode determination and guiding developers toward improved materials and designs. Standard abuse tests with defined start and end conditions are performed on all devices to provide comparison between technologies. New tests and protocols are developed and evaluated to more closely simulate real-world failure conditions. When scaling from cell to the battery level, a detailed understanding of cell interactions provides insight on safety performance. Single point failures from a cell or group of cells can be initiated by a number of triggers including internal short circuit, misuse or abuse, or component failure at the battery or system level. Propagation of a single failure event (regardless of the initiation trigger) through an entire battery, system, or vehicle is an unacceptable outcome with regards to EV battery safety. In this FY, our work has focused on evaluating the propagation of a single cell thermal runaway event through a battery using a variety of design considerations with an emphasis on passive thermal management impacts. This has been coupled with thermal modeling by NREL for these testing conditions. In addition, alternative failure initiation methods have been evaluated to provide direct comparisons of possible energy injection between modes. This data was compiled to better identify what propagation test method is appropriate given certain battery designs. Expanding the analysis of short circuit current during failure propagation has been done for EV relevant chemistries. Ongoing test development and validation to obtain these values has been achieved. While robust mechanical models for vehicles and vehicle components exist, there is a gap for mechanical modeling of EV batteries. The challenge with developing a mechanical model for a battery is the heterogeneous nature of the materials and components (polymers, metals, metal oxides, liquids). Our work will provide empirical data on the mechanical behavior of batteries under compressive load to understand how a battery may behave in a vehicle crash scenario. This work is performed in collaboration with the U.S. Council for Automotive Research (USCAR) and Computer Aided Engineering of Batteries (CAEBAT). These programs have supported the design and development of a drop tower testing apparatus to close the gap between cell/string level testing and full scale crash testing with true dynamic rate effects.

25 ENERGY STORAGE↗

Model Development and Analysis of Clean and Efficient Engine Combustion FY 2018 Annual Progress Report

Simulations of 1D laminar flames using detailed kinetic mechanisms are useful in a wide variety of engine combustion applications. The most common use is in the computation of laminar flame speeds, which are useful for chemical mechanism validation, as inputs to turbulent flame speed correlations, and to predict knocking in spark-ignition engines. Other applications include generation of flamelet libraries for CFD simulations and prediction of combustion dynamics in micro-flow reactors. These fundamental combustion simulations are an important component in the study of realistic transportation fuel models in boosted spark-ignition and multi-mode engine configurations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Mortandad Canyon seismic modeling (Progress Report)

The goal of this project is to assess site amplification for LANL through modeling of site and topography effects. Such assessment is difficult due to the lack of data documenting site effects for large normal faulting earthquakes such as the Pajarito Fault System that was found to be governing the seismic hazard at LANL. LANL site is also characterized by unique geologic settings, a series of mesa at the edge of the huge volcanic complex of the Jemez caldera. The latter has produced a series of successive and intertwined deposits of volcanic flow and sedimentary layer. Such layering of material with different elastic properties is expected to create large amplification effects magnified further by the presence at the surface of tuff materials. In 2014, a seismic campaign was performed in the Mortandad Canyon with a network of sensors on and near a local mesa. That campaign was designed to provide experimental data to estimation and prediction of amplification and site effects at LANL. An analysis on the seismic noise records of that campaign shows evidence of amplification of the seismic amplitude for the stations on the top of the mesa. Our goal is to reproduce the effect observed (both retrieving the resonance frequencies and amplification levels). We also plan to test if amplification effects observed for seismic noise can be extended to shaking produced by earthquakes. We are using a 3D modeling tool based on the Spectral Element Method (SEM) that is a particular type of high-order finite element modeling. Two types of seismic sources will be considered: (1) earthquakes for purpose of seismic hazard evaluation, (2) ambient noise. We show 2 series of numerical computations: (1) seismic waves are generated by random sources to simulate ambient noise. (2) seismic waves are planar waves to simulate a distant earthquake. We plan in the future to model rupture scenario on the Pajarito Fault System.

58 GEOSCIENCES↗

FY2018 Analysis Annual Progress Report

During fiscal year 2018 (FY 2018), the U.S. Department of Energy Vehicle Technologies Office (VTO) funded analysis projects supportive of VTO’s goals to pursue early stage research in vehicle and mobility system technologies to improve energy efficiency, increase energy reliability and security, improve transportation affordability, and promote economic growth. VTO analysis projects result in a foundation of data, analytical models, and applied analyses that provide insights into critical transportation energy problems and assist in research investment prioritization and portfolio planning.

33 ADVANCED PROPULSION SYSTEMS↗

Advanced Combustion Engines and Fuels 2018 Annual Progress Report

The Advanced Combustion Engines and Fuels Program supports the Vehicle Technology Office’s goal and focuses early-stage research and development (R&D) to improve understanding of the combustion processes, fuel properties, and emission control technologies while generating knowledge and insight necessary for industry to develop the next generation of engines and fuels.

33 ADVANCED PROPULSION SYSTEMS↗

Materials 2018 Annual Progress Report

The Materials Technology Program supports the Vehicles Technologies Office’s mission to help consumers and businesses reduce their transportation energy costs while meeting or exceeding vehicle performance expectations. The propulsion materials research portfolio seeks to develop higher performance materials that can withstand increasingly extreme environments and address the future properties needs of a variety of high-efficiency powertrain types, sizes, fueling concepts, and combustion modes. Advanced lightweight materials enable improvements in fuel economy by providing properties that are equal to or better than traditional materials at a lower weight. Because it takes less energy to accelerate a lighter object, replacing cast-iron and traditional steel components with lightweight materials such as high-strength steel, magnesium (Mg), aluminum (Al), and polymer composites can directly reduce a vehicle’s fuel consumption. Materials technology activities focus on the following cost and performance targets: (1) enable a 25% weight reduction for light-duty (LD) vehicles including body, chassis, and interior as compared to a model year 2012 baseline at no more than a $\$$5/lb-saved increase in cost; and (2) validate a 25% improvement in high-temperature (300°C) development of engine exhaust catalyst materials strength relative to components made with 2010 baseline cast Al alloys (A319 or A356) for improved efficiency LD engines.

33 ADVANCED PROPULSION SYSTEMS↗

First Annual Progress Report on the Procurement and Post-Irradiation Examination of the Selected Samples of Alloy 800H and Grade 92 and 91 Steels

Ferritic-martensitic steel Grade 92, with Grade 91 as a reference, together with austenitic stainless steel (or Incoloy Alloy) 800H and its grain-boundary-engineered version 800H-TMP (Thermo-Mechanical Processing), is investigated in this project. A total of fifteen Grade 92 samples from two or three heats, four T91 samples from two heats, and six 800H and six 800H-TMP samples from one heat were selected, which were primarily irradiated in the Advanced Test Reactor (ATR) of Idaho National Laboratory (INL), with the rest in the High Flux Isotope Reactor (HFIR) of Oak Ridge National Laboratory (ORNL), BOR-60 of Russia, and Phénix reactor of France. The samples were irradiated in the temperature range of 241 to 720°C and a dose range of 1.28 to ~70 displacements per atom. All the INL and ORNL samples and part of the LANL (Los Alamos National Laboratory) samples have been received at the Irradiated Materials Examination and Testing (IMET) hot cell facility. The selected ORNL samples include six Grade 92 and two 800H samples, which were irradiated in the HFIR to 0.46–14.66 dpa at 400 to ~720°C. The Grade 92 is an optimized heat and named as G92-2b. The two 800H samples have one sample as the standard solution-annealed condition and the other sample as a TMP condition with a maximized fraction of low-Σ coincidence site lattice (CSL) boundaries. Tensile test of the G92-2b samples were conducted at room temperature in the IMET hot cell. The lower temperature irradiation at 400–496.7°C to 0.52–14.66 dpa resulted in minimal changes in tensile properties. However, the higher temperature irradiation at ~683.3–720°C to 0.46–14.63 dpa tended to reduce yield and tensile strength by about –136 to –311 MPa and plastic elongation by –1 to –3% with the increasing dose. The 800H and 800H-TMP samples were tensile-tested at their irradiation temperature 580°C in the IMET hot cell, which showed >40% increase in yield and tensile strength with nearly 9% reduction in elongation for 800H-TMP compared with 800H. Three of the G92-2b samples, i.e., GB04 (7.44 dpa at ~490°C), GB05 (14.66 dpa at 496.7°C), and GB12 (14.63 dpa at ~720°C), were examined at the LAMDA for Vickers hardness measurements and microstructural characterization by SEM and TEM. Vickers hardness was successfully measured on GB12, which was reduced by is – (112.4 ± 12.3) HV1 from the control sample. However, the Vickers hardness measurements were failed on GB04 and GB05 because the samples were polished too thin to prevent the interference from the substrate (epoxy). The other half of the GB04 and GB05 will be polished for the hardness measurements, as well as nanoindentation studies. Fractography by SEM indicated increased numbers of ductile dimples (or voids) with the increasing irradiation dose, while significantly increased numbers and sizes of dimples with the increasing irradiation temperature. TEM characterization exhibited the presence of Cr 23 C 6 , VN, and Laves precipitates at boundaries and matrix, which showed pronounced precipitate-dislocation interactions (pinning effect). Dense dislocations but limited dislocation loops were observed in the samples, which noticeably reduced in GB12. Additionally, some tiny partially amorphized spherical domains were observed in GB12, which had a normal body-centered cubic lattice parameter of 9Cr steels at the surround regions but ~11% smaller than the lattice parameter of the matrix away from the amorphized spherical domains. Further characterization will be pursued to clarify the new findings.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Terry Turbopump Analytical Modeling Efforts in Fiscal Year 2017 (Progress Report)

This document details the computational fluid dynamic and system-level modeling, including a mechanistic representation of a turbine/pump, for Fukushima Daiichi Unit 2. Until this recent effort, mechanistic modeling had been confined to an otherwise coarse model of Fukushima Daiichi Unit 2 laden with manipulations of boundary conditions that substituted for detailed representations of the reactor, drywell, and wetwell. This work has provided insights in modeling uncertainties and provides confirmation for experimental efforts for the Terry turbopump.

42 ENGINEERING↗