Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer mechanics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Covalently-Bonded Laminar Assembly of Van der Waals Semiconductors with Polymers: Toward High-Performance Flexible Devices

Van der Waals semiconductors (vdWS) offer superior mechanical and electrical properties and are promising for flexible microelectronics when combined with polymer substrates. However, the self-passivated vdWS surfaces and their weak adhesion to polymers tend to cause interfacial sliding and wrinkling, and thus, are still challenging the reliability of vdWS-based flexible devices. Here, in this study, an effective covalent vdWS–polymer lamination method with high stretch tolerance and excellent electronic performance is reported. Using molybdenum disulfide (MoS 2 ) and polydimethylsiloxane (PDMS) as a case study, gold–chalcogen bonding and mercapto silane bridges are leveraged. The resulting composite structures exhibit more uniform and stronger interfacial adhesion. This enhanced coupling also enables the observation of a theoretically predicted tension-induced band structure transition in MoS 2 . Moreover, no obvious degradation in the devices’ structural and electrical properties is identified after numerous mechanical cycle tests. This high-quality lamination enhances the reliability of vdWS-based flexible microelectronics, accelerating their practical applications in biomedical research and consumer electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Achieving ultrahigh modulus of resilience and enhanced thermal stability in ZnO x /SU-8 interpenetrating network polymer nanocomposite nanopillars

The modulus of resilience, a mechanical property that quantifies the maximum strain energy density a material can store during elastic deformation, is a crucial parameter for materials used in flexible displays, micro/nano-electro-mechanical system (M/NEMS) actuators, and ultra-sensitive pressure sensors. In this study, ZnO x /SU-8 nanocomposite nanopillars with a diameter of 300 nm, fully infiltrated with a uniformly distributed, interpenetrating amorphous ZnO x filler network, were synthesized via vapor-phase infiltration (VPI). In-situ uniaxial nano-compression tests revealed that the modulus of resilience of ZnO x /SU-8 reaches ∼ 12 MJ/m 3 , which is an ultrahigh value among all engineering materials with comparable strength. In addition, the synthesis fidelity, inorganic infiltration depth, and mechanical performance were all significantly improved compared to VPI-synthesized AlO x nanocomposites. Thermal stability, another key requirement for M/NEMS device materials operating under extreme environments, was also notably enhanced. Furthermore, partial crystallization of the amorphous ZnO x fillers during annealing contributed to an additional increase in modulus of resilience, reaching up to ∼ 13.9 MJ/m 3 . This work presents an effective fabrication strategy for producing nanostructured organic–inorganic hybrid nanocomposites with ultrahigh modulus of resilience and superior thermal stability, paving the way for their integration into next-generation flexible displays and high-performance M/NEMS devices working under harsh environments.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Molecular Origin of Strain-Induced Chain Alignment in PDPP-Based Semiconducting Polymeric Thin Films

Donor–acceptor (D–A) type semiconducting polymers have shown great potential for the application of deformable and stretchable electronics in recent decades. However, due to their heterogeneous structure with rigid backbones and long solubilizing side chains, the fundamental understanding of their molecular picture upon mechanical deformation still lacks investigation. Here, the molecular orientation of diketopyrrolopyrrole (DPP)-based D–A polymer thin films is probed under tensile deformation via both experimental measurements and molecular modeling. The detailed morphological analysis demonstrates highly aligned polymer crystallites upon deformation, while the degree of backbone alignment is limited within the crystalline domain. Besides, the aromatic ring on polymer backbones rotates parallel to the strain direction despite the relatively low overall chain anisotropy. Additionally, the effect of side-chain length on the DPP chain alignment is observed to be less noticeable. These observations are distinct from traditional linear-chain semicrystalline polymers like polyethylene due to distinct characteristics of backbone/side-chain combination and the crystallographic characteristics in DPP polymers. Furthermore, a stable and isotropic charge carrier mobility is obtained from fabricated organic field-effect transistors. This study deconvolutes the alignment of different components within the thin-film microstructure and highlights that crystallite rotation and chain slippage are the primary deformation mechanisms for semiconducting polymers.

36 MATERIALS SCIENCE↗
NASA NTRS2003

Temperature effects on polymer-carbon composite sensors

At JPL we have investigated the effects of temperature on polymer-carbon black composite sensors. While the electrical properties of polymer composites have been studied, with mechanisms of conductivity described by connectivity and tunneling, it is not fully understood how these properties affect sensor characteristics and responses.

JPL Enose polymer-carbon composite sensor temperat↗
DOE OSTI2021

Fluoropolymer Aging Assessments

Fluoropolymer (FP) binders are commonly only a few percent of polymer bonded explosive compositions but they are essential for the mechanical integrity of the part. Because we are using newly manufactured binders, we need to understand how lot variations might affect processing, aging, and mechanical properties. Time, temperature and radiation induce phase changes in fluoropolymers. These phase changes can rearrange the polymer causing crystalline domains to nucleate and grow that can alter mechanical properties. These studies quantify the aging process so that it may be cross correlated with changes in the adhesion, strength, and other properties important for performance.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Toughening by Nanodroplets: Polymer–Droplet Biocomposite with Anomalous Toughness

The development of new polymer composites is highly dependent on the design of novel fillers that can bring more benefits in the design and control of structure–property–function than conventional solid particles. Here, inspired by the unique coupling structures of tough mussel byssus, we employ nanodroplets of high-boiling-point oligomers as the liquid filler to fabricate a new class of polymer–droplet composites (PDCs). The combination of nanodroplets and chain end/tail modifier in PDCs finally generates soft-coupling structures with chain ends coupled by the nanodroplets. With this strategy, brittle poly(lactic acid) is successfully transformed into a tough bioplastic with toughness improved by over 2000% via a minimal amount of the modifiers (1.5 wt %). Moreover, the composites show unexpected speed-enhanced energy absorption capability. A soft-coupling toughening mechanism is further proposed for the first time to understand the PDCs’ mechanical properties. This work also indicates the potential of nanodroplets as a new tool for tuning the mechanical properties and even functions of polymer composites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Blending Compostable Plastics for Packaging Applications

Non-sustainable packaging materials (polymers) are a large portion of the increasing amount of plastic waste that become environmental pollutants. While many biodegradable or compostable polymers have been developed in recent years, most fail to compete with the non-sustainable polymers dominating the market, due to lack of certain desired properties, such as thermal (high melt temperature) and mechanical (high ductility) performance. For example, the popular compostable polymer polylactic acid (PLLA) has a high melt temperature but is very brittle. Another polymer, poly(d-valerolactone) (PVL) demonstrates great ductility but has a very low melt temperature. By blending PLLA and PVL, there is an opportunity to create a new biodegradable material with synergistic desired properties for packaging applications. In this study, we produce several (9) physical blends of PVL and PLLA with varying compositions of the two polymers while applying three different materials to make them more compatible (compatibilizers). We test the success of compatibilization by scanning electron microscopy (SEM), mechanic testing (strain at break) and differential scanning calorimetry (melting temperature). Overall, we highlight several promising materials with high compatibility and desired thermomechanical properties for sustainable packaging. Ideally, these materials could help mitigate future plastic pollution in Colorado and beyond.

blending↗
DOE OSTI2021

Tuning the Double Gyroid Phase Window in Block Copolymers via Polymer Chain Conformation Near the Interface

Block copolymer network morphologies have been proven interesting for applications ranging from mechanical to transport and optical properties. The shape of the polymer chain and its ability to stretch across an interface can be used as handles to target these network morphologies. Here, we show that the double gyroid phase window is broadened when there is a flexible segment near the interface and narrowed when a more constrained segment is placed there by using a series of poly(styrene-b-peptoid) block copolymers in which the polypeptoid block chain conformation can be tuned to adopt either a helical or a coil conformation (NRpe 6 vs Npe 6 ). The double gyroid phase is accessed in both block copolymer series, while the phase boundaries are shifted toward larger polypeptoid volume fractions in the helix-forming PS–(NRpe 6 Nmey) series, due to the more compact helix segment (i.e., the helix segment has the same chain volume as its random coil counterpart but occupies less space). The space-filling difference between the helix and coil segment is further confirmed by the smaller domain spacing of PS–(NRpe 6 Nme 39 ) compared to PS–(Npe 6 Nme 36 ) (13.9 nm vs 14.3 nm) despite the former having a longer polypeptoid block. Furthermore, a broadened double gyroid phase window is accessed in the PS–(Npe 6 Nme y ) series that has a flexible coil segment near the interface. These results demonstrate the possibility of tuning the double gyroid phase in linear block copolymers by chain conformation near the interface alone, highlighting chain conformation as a versatile handle in block copolymer design.

36 MATERIALS SCIENCE↗
NASA NTRS1986

Origin of life and iron-rich clays

The premise that life began with self-replicating iron-rich clays is explored. In association with these clays and UV light, polar organic molecules, such as oxalic acid, were synthesized. The carbonaceous chondrites have both iron-rich clays and organic molecules. It is convenient to classify meteoritic organic matter into 3 categories: insoluble polymer, hydrocarbons and polar organics (soluble in water). Recent work on the delta D, delta N-15 and delta C-13 has made it clear that these three fractions have been made by three different mechanisms. A significant fraction of the insoluble polymer has a delta-D which suggests that it was made in an interstellar medium. The hydrocarbons seem to have been made on a parent body by a Fischer-Tropsch mechanism. The polar organics were probably synthesized in a mixture of carbonate (NH4)2CO3, Fe(++) ion and liquid water by radiolysis. In a set of experiments the radiolysis of (NH4)2CO3 in the presence and absence of Fe(++) ion has been examined. The synthesis of glycine in the presence of Fe(++) ion is 3-4 times that in the absence of ferrous ion. The effects of the addition of hydrocarbons to this mixture are explored. Iron-rich clays at low temperature and pressure are synthesized. So far the results are not sufficiently crystalline to look for replication. It should be noted that organic chelating agents such as oxalic acid do increase the crystallinity of the clays but not sufficiently. The hydrothermal synthesis of iron-rich clays is being examined.

Hartman, H. H.↗
DOE OSTI2025

B‐Staging and Crosslinking of Polycarbosilane at Room Temperature: Cure Mechanism and Properties

The viscosity of polycarbosilane (PCS) polymers is not advantageous for free forming. Various fillers and heat are used to obtain a formable paste. Due to the low yield stress, structures and preforms tend to slump or resin will flow out, especially during the curing of the polymer. B-staging of PCS allows for a more stable structure from room temperature until the full cure of the allyl groups occurs with heat. Additionally, hydrosilation is an effective means of crosslinking at room temperature and controlling viscosity. A network structure was formed in SMP-10 using silane and a vinyl-based crosslinker to bridge each polymer chain. Pt addition catalysts were added to enhance the increase in viscosity to make a lightly crosslinked gel to aid in thickening and forming and to improve the ceramic yield at 1000°C. In conclusion, this enables several options for controlling rheology and improving the properties of preceramic polymers to avoid slumping during curing.

inorganic polymers↗
NASA NTRS1988

Probing Polymer-Segment Motions By ESR

Molecular origins of mechanical properties and aging processes studied. Rotational motions of segments of poly(methyl methacrylate) molecules studied theoretically and experimentally. Activation energies of these motions as determined from temperature dependencies of ESR spectra agree closely with predictions of theory.

Tsay, Fun-Dow↗
NASA NTRS1994

High elongation elastomers

A new class of liquid curable elastomers with unusual strength and elasticity has been developed at the Naval Air Warfare Center Weapons Division, China Lake. Over the years, studies have been conducted on polymer structure and its influence on the mechanical properties of the ensuing composites. Different tools, including nuclear magnetic resonance, have been used. This paper presents a summary of the factors controlling the mechanical behavior of composites produced with the new liquid curable elastomers, including the effects of plasticizers. It also provides an overview of the nuclear magnetic resonance study on polymer structure, the composition and properties of some live and inert formulations produced at China Lake, and some possible peace-time applications for these new elastomeric materials.

Brady, V. L.↗
DOE OSTI2023

A comparison of mechanical properties from natural and process-induced interfaces in filament extrusion AM of polymer blends

Polymer blends are commonly tuned for specific applications to achieve desired properties otherwise inaccessible or prohibitively expensive to obtain via homopolymers. The interfacial characteristics of the polymer A-polymer B interface and resultant domain sizes govern key performance properties. Micro- and meso-scale morphology forms through the interplay of surface forces between the polymers and between each polymer and the surrounding atmosphere. Analogously, the layer-layer and road-road interfaces of material extrusion (MEX) additive manufacturing (AM) govern key performance properties of printed parts. This work explores the effect of layer height on the thermomechanical performance of polystyrene (PS)-polycarbonate (PC) blends. Filament is prepared from a 50/50 weight ratio of the two polymers and compared against dual-nozzle printing where every layer alternates between PS or PC homopolymer forming a part with an overall 50/50 polymer ratio. Typical indicators of polymer blend compatibility are also studied.

Chatham, Camden A.↗
NASA NTRS2000

Mechanical properties of a biodegradable bone regeneration scaffold

Poly (Propylene Fumarate) (PPF), a novel, bulk erosion, biodegradable polymer, has been shown to have osteoconductive effects in vivo when used as a bone regeneration scaffold (Peter, S. J., Suggs, L. J., Yaszemski, M. J., Engel, P. S., and Mikos, A. J., 1999, J. Biomater. Sci. Polym. Ed., 10, pp. 363-373). The material properties of the polymer allow it to be injected into irregularly shaped voids in vivo and provide mechanical stability as well as function as a bone regeneration scaffold. We fabricated a series of biomaterial composites, comprised of varying quantities of PPF, NaCl and beta-tricalcium phosphate (beta-TCP), into the shape of right circular cylinders and tested the mechanical properties in four-point bending and compression. The mean modulus of elasticity in compression (Ec) was 1204.2 MPa (SD 32.2) and the mean modulus of elasticity in bending (Eb) was 1274.7 MPa (SD 125.7). All of the moduli were on the order of magnitude of trabecular bone. Changing the level of NaCl from 20 to 40 percent, by mass, did not decrease Ec and Eb significantly, but did decrease bending and compressive strength significantly. Increasing the beta-TCP from 0.25 g/g PPF to 0.5 g/g PPF increased all of the measured mechanical properties of PPF/NVP composites. These results indicate that this biodegradable polymer composite is an attractive candidate for use as a replacement scaffold for trabecular bone.

NASA Discipline Cell Biology↗
DOE OSTI2024

Improving the Recyclability of Polymer Composites With Cellulose Nanofibrils

Cellulose nanofibers (CNFs) have been widely studied for their reinforcing potential in high-performance composites. While there are numerous publications on CNF-reinforced composites in a variety of polymer matrices, few have considered the recyclability of such thermoplastic composites and whether the incorporation of CNFs deteriorates or improves their performance upon reprocessing. In this study, two thermoplastic resins, poly(lactic acid) (PLA), and glycol-modified polyethylene terephthalate (PETg), were prepared with CNF reinforcement and thermomechanically recycled to investigate the effect of CNF inclusion on the composite properties after reprocessing as well as their effect on the composites’ number of useful life cycles. Additionally, changes in mechanical, thermal, rheological, molecular, and microstructural properties of the composites and/or base resins were monitored as a function of cycle numbers. As is typical, the polymers’ molecular weight and mechanical performance deteriorated with continued processing. However, the addition of spray dried CNF was found to better maintain the mechanical performance of both polymers throughout multiple recycling steps as compared to neat samples. For example, the tensile strength of PETg with 20 wt% CNF after 6 processing cycles was found to exceed that of virgin neat PETg, and higher loadings of CNF were found to preserve a higher yield strength during multiple rounds of reprocessing compared to PETg composites with lower CNF loadings. Ultimately this study indicates that the addition of CNF to some thermoplastic materials can increase both their sustainability by offsetting the use of high-embodied energy resins and their circularity by enabling performance retention over more use cycles.

42 ENGINEERING↗
DOE OSTI2024

Additive friction stir deposition induced stress ripples in aluminum alloy

In additive manufacturing, modification of the viscosity of softened or molten metal plays a significant role in the development of mechanical properties distribution. Similar to soft polymers, molten or softened metal usually exhibits vastly different viscoelastic properties. During scratching tests, viscoelastic polymers undergo spatiotemporal stress development and relaxation, causing stress ripples to form on their surfaces. Here, it is observed that friction stir-based solid-state manufacturing can yield similar stress ripples on softened aluminum alloys due to the linear motion of the deposition tool. Softened aluminum alloys exhibit viscoelastic and viscoplastic responses similar to polymeric material during the solid-state deposition process. In the final product, residual stress ripples appear on the surface of the metal alloy due to periodic residual stress relaxation, leading to oscillatory behavior from the bulk mechanical properties of the material. The orientation of the in-built stress pattern formed in the bulk of the additively manufactured metal alloy underneath the visually evident onion ring-like surface pattern formation is diametrically in the opposite direction. The experimentally observed results are consistent with analytical calculation and numerical simulations in terms of behaviors.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Designing Physicochemically‐Ordered Interphases for High‐Performance Composites

To enhance the mechanical properties of carbon fiber‐reinforced polymer composites, a physicochemical scaffold is designed incorporating microscopically architected chemically reactive nanofibers that act as a multiscale bridge between the carbon fibers and the matrix. Thermally activated nanofibers leverage their morphologically driven mechanochemical properties to form covalent bonds with adjacent polymer molecules, creating a co‐continuous network that dramatically enhances fiber‐matrix load transfer. By meticulously controlling the nanofiber architecture through variable surface area, functional group availability, and polymer chain alignment effects, the extent of covalent bonding between nanofibers and the matrix is manipulated ultimately resulting in improved carbon fiber‐matrix adhesion. Further, the concept was validated using polyacrylonitrile nanofibers within an acrylonitrile butadiene styrene matrix in a discontinuous carbon fiber‐reinforced composite system. Nanomechanical studies using atomic force microscopy and low‐field nuclear magnetic resonance spectroscopy confirmed immobilized, chemically transferred, and ordered nanostructures at the interphase. The resulting composites demonstrated ≈56% and ≈175% improvements in tensile strength and toughness, respectively, compared to composites without nanofiber. Comprehensive thermal, rheological, and X‐ray scattering analyses, along side all‐atomic molecular dynamics simulations, revealed the fundamental mechanisms behind these improvements in mechanical behavior. The versatility and efficacy of the approach have the potential to address longstanding interphase challenges in the composite industry.

36 MATERIALS SCIENCE↗