Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Preliminary economic evaluation of the use of graphite composite materials in surface transportation, phase 1 results

Composite materials are discussed with emphasis on the identification of the characteristics of those materials that make them attractive for use in surface transportation. Potential uses of graphite composites are given including automotive applications and the effects of materials substitution on vehicle characteristics and performance. Preliminary estimates of the economic effects of the use of graphite composite materials on vehicle manufacturers and consumers are included. The combined impact on the national economy of vehicle design changes to meet mandated fuel efficiency requirements and the extensive use of graphite composite materials in the automotive industry is considered.

Source record↗

Hydrothermal alteration of CM carbonaceous chondrites: Implications of the identification of tochilinite as one type of meteoritic PCP

Poorly characterized phases (PCP's) constitute up to 30 volume percent of some CM carbonaceous chondrites, and are therefore an important key to an understanding of the physico-chemical conditions attending matrix evolution. An iron rich form of the terrestrial phase tochilinite was recently identified as a common type of PCP. Tochilinite has the general formula 6Fe(0.9)S.5(Mg,Fe)(OH)2 and consists of alternating machinawite (FeS) and brucite ((Mg,Fe)(OH)2) sheets, with iron vacancies in the sulfide sheets. In iron rich tochilinite, ferrous hydroxide, called amakinite, replaces brucite. If CM carbonaceous kchondrites have underdone hydrothermal alteration, iron rich tochilinite, at least, probably grew from aqueous solutions characterized by low FO2, high FS2, pH 10 to 12, and at a temperature at or below 170 C.

Zolensky, M. E.↗

Uranyl/12-crown-4 Ether Complexes and Derivatives: Structural Characterization and Isomeric Differentiation

The following gas-phase uranyl/12-crown-4 (12C4) complexes were synthesized by electrospray ionization: [UO 2 (12C4) 2 ] 2+ and [UO 2 (12C4) 2 (OH)] + . Collision-induced dissociation (CID) of the dication resulted in [UO 2 (12C4-H)] + (12C4-H is a 12C4 that has lost one H), which spontaneously adds water to yield [UO 2 (12C4-H)(H 2 O)] + . The latter has the same composition as complex [UO 2 (12C4)(OH)] + produced by CID of [UO 2 (12C4) 2 (OH)] + but exhibits different reactivity with water. The postulated structures as isomeric [UO 2 (12C4-H)(H 2 O)] + and [UO 2 (12C4)(OH)] + were confirmed by comparison of infrared multiphoton dissociation (IRMPD) spectra with computed spectra. The structure of [UO 2 (12C4-H)] + corresponds to cleavage of a C-O bond in the 12C4 ring, with formation of a discrete U-O eq bond and equatorial coordination by three intact ether moieties. Comparison of IRMPD and computed IR spectra furthermore enabled assignment of the structures of the other complexes. Theoretical studies of the chemical bonding features of the complexes provide an understanding of their stabilities and reactivities. Finally, the results reveal bonding and structures of the uranyl/12C4 complexes and demonstrate the synthesis and identification of two different isomers of gas-phase uranyl coordination complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First Results of the Phase II SIMPLE Dark Matter Search

We report results of a 14.1 kg d measurement with 15 superheated droplet detectors of total active mass 0.208 kg, comprising the first stage of a 30 kg d Phase II experiment. In combination with the results of the neutron-spin sensitive XENON10 experiment, these results yield a limit of |a{sub p}|<0.32 for M{sub W}=50 GeV/c{sup 2} on the spin-dependent sector of weakly interacting massive particle-nucleus interactions with a 50% reduction in the previously allowed region of the phase space, formerly defined by XENON, KIMS, and PICASSO. In the spin-independent sector, a limit of 2.3x10{sup -5} pb at M{sub W}=45 GeV/c{sup 2} is obtained.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Visible Wavelength Spectroscopy of Ferric Minerals: A Key Tool for Identification of Ancient Martian Aqueous Environments

The mineralogic signatures of past aqueous alteration of a basaltic Martian crust may include iron oxides and oxyhydroxides, zeolites, carbonates, phyllosilicates, and silica. The identities, relative abundances, and crystallinities of the phases formed in a particular environment depend on physicochemical conditions. At one extreme, hot spring environments may be characterized by smectite-chlorite to talc-kaolinite silicate assemblages, plus crystalline ferric oxides dominated by hematite. However, most environments, including cold springs, pedogenic layers, and ponded surface water, are expected to deposit iron oxides and oxyhydroxides, carbonates, and smectite-dominated phyllosilicates. A substantial fraction of the ferric iron is expected to occur in nanophase form, with the exact mineralogy strongly influenced by Eh-pH conditions. Detection of these phases has been an objective of a large body of terrestrial telescopic, Mars orbital, and landed spectral investigations and in situ compositional measurements. However, clear identifications of many of these phases is lacking. Neither carbonate nor silica has been unequivocally detected by any method. Although phyllosilicates may occur near the limit of detection by remote sensing, in general they appear to occur in only poorly crystalline form. In contrast, compelling evidence for ferric iron minerals has been gathered by recent telescopic investigations, the Imager for Mars Pathfinder (IMP), and the Thermal Emission Spectrometer (TES) on the Mars Global Surveyor (MGS). These data yield two crucial findings: (1) In the global, high spatial resolution TES data set, highly crystalline ferric iron (as coarse-grained 'gray' hematite) has been recognized but with only very limited spatial occurrence and (2) Low-resolution telescopic reflectance spectroscopy, very limited orbital reflectance spectroscopy, and landed multispectral imaging provide strong indications that at least two broad classes of ferric iron minerals are commonplace in non-dust covered regions.

Murchie, Scott L.↗

Hadro-Production Measurements to Characterize the T2K Neutrino Flux with the NA61 Experiment at the CERN SPS

As the intensity of neutrino beams produced at accelerators increases, the systematic errors due to the poor characterization of the neutrino flux become a limiting factor for high precision neutrino oscillation experiments like T2K. This limitation comes mainly from the poor knowledge of production cross sections for pions and kaons at the same energy and over the same phase-space yielding these neutrino beams. Therefore new hadro-production measurements are mandatory. The NA61/SHINE is a large acceptance hadron spectrometer at the CERN-SPS designed for the study of the hadronic final states produced in interactions of various beam particles (protons, pi's, and heavy ions) with a variety of fixed targets at the SPS energies. Ongoing measurements with the NA61 detector for characterizing the neutrino beam of the T2K experiment at J-PARC are introduced. These measurements are performed using a 30 GeV proton beam impinging on carbon targets of different lengths, including a replica of the T2K target. The performance of the NA61 detector and preliminary NA61 measurements from the 2007 run are presented.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

In Situ Identification of NNH and N 2 H 2 by Using Molecular-Beam Mass Spectrometry in Plasma-Assisted Catalysis for NH 3 Synthesis

In this work, ammonia synthesis at 533 K and atmospheric pressure was investigated in a coaxial dielectric barrier discharge (DBD) plasma reactor without packing and with porous γ-Al 2 O 3 , 5 wt % Ru/γ-Al 2 O 3 , or 5 wt % Co/γ-Al 2 O 3 catalyst particles. Gas-phase species were monitored in situ using an electron impact molecular-beam mass spectrometer (EI-MBMS). Gas-phase species NNH and N 2 H 2 were first identified under common conditions of plasma-assisted ammonia synthesis and were present at levels comparable to that of NH 3 in the plasma discharge. Concentrations of NNH, N 2 H 2 , and NH in a reactor packed with γ-Al 2 O 3 or other particles were lower than those observed in an empty reactor, while the concentration of NH 3 increased. These observations point to the importance of NNH and N 2 H 2 in plasma-assisted surface reactions in ammonia synthesis. Reaction pathways of direct adsorption of gas-phase NNH and N 2 H 2 on solid surfaces and subsequent reactions were proposed. This study demonstrated that in situ identification of gas-phase species via EI-MBMS provides a powerful approach to study the kinetics of plasmaassisted catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectroscopic Studies of the Several Isomers of UO3

Uranium trioxide is known to adopt seven different structural forms. While these structural forms have been well characterized using x-ray or neutron diffraction techniques, little work has been done to characterize their spectroscopic properties, particularly of the pure phases. Since the structural isomers of UO3 all have similar thermodynamic stabilities and most tend to hydrolyze under open atmospheric conditions, mixtures of UO3 phases and the hydrolysis products are common. Much effort went into isolating pure phases of UO3. Utilizing x-ray diffraction as a sample identification check, UV/Vis/NIR spectroscopic signatures of α-UO3, β-UO3, γ-UO3 and UO2(OH)2 products were obtained. The spectra of the pure phases can now be used to characterize typical samples of UO3, which are often mixtures of isomers.

polymorphs↗

Advances in Structure Prediction of Lanthanides and Actinides with Genetic Algorithms

Computationally guided materials discovery has advanced significantly in the past two decades. Recent developments of widely available genetic algorithm-based structure prediction software in the past 10+ years has led to increased use of this methodology in the discovery and design of new materials. Owing to the computational challenges of treating f-block elements and computationally expensive methods for structure prediction, the discovery of new phases of lanthanide and actinide materials has been particularly challenging. With advancements in the development of genetic algorithms for structure prediction and the continuing improvement of high-performance computing resources, genetic algorithms provide a tractable method to find new stable phases of materials at high pressure or to search a large phase space for unknown compounds. Genetic algorithms have already been applied to the successful identification of novel lanthanide and actinide materials, as well as the prediction of unusual material properties in new phases that make promising synthetic targets.

Shields, Ashley↗

Simplex‐based model for nanoparticle grain identification in four‐dimensional scanning transmission electron microscopy data

Grain identification in polycrystalline nanoparticles, for example, determining which crystal phases are present at each spatial location, is fundamental to materials characterisation. This is particularly challenging when grains overlap extensively, as commonly occurs in four-dimensional scanning transmission electron microscopy (4D-STEM) datasets. We propose a simplex-based model (SBM) in which each simplex vertex represents the diffraction pattern (DP) of a pure grain, and the simplex edges and interior represent overlapping grains. Our SBM grain identification algorithm operates on the Bragg disk (BD) data matrix distilled from the 4D-STEM data to identify the grain membership at each scan position, together with a BD feature matrix whose columns represent the DPs for each constituent grain, which is important for identifying the crystal structure of each grain. We solve the model using a two-stage algorithm. In Stage 1, we adapt a linear mixing algorithm to estimate an initial BD feature matrix whose columns represent DPs of potentially overlapping grains. Our Stage 2 algorithm incorporates sparsity considerations to transform the initial BD feature matrix so that its columns represent DPs of pure grains. Using simulated datasets with various grain configurations, we demonstrate that SBM recovers both the BD feature matrix and membership maps more accurately than existing methods, even when a grain lacks any pure region and completely overlaps with other grains.

4D-STEM segmentation↗

New polymers for phase partitioning

The synthesizing of several polyethylene glycols having crown ethers attached is reported. This work led to the identification of three new polymer types which promise to be more effective at selectively binding specific cell types. Work was completed on identification of chemical properties of the new polymer crowns and on development of new techniques for determination of polymer-phase composition.

Harris, J. M.↗

Sample preparation methods for scanning electron microscopy of homogenized Al-Mg-Si billets: A comparative study

Characterization of Mg-Si precipitates is crucial for optimizing the homogenization heat treatment of Al-Mg-Si alloys. Although sample preparation is key for high quality scanning electron microscopy imaging, most common methods lead to dealloying of Mg-Si precipitates. In this article we systematically evaluate different sample preparation methods: mechanical polishing, etching with various reagents, and electropolishing using different electrolytes. We demonstrate that the use of a nitric acid and methanol electrolyte for electropolishing a homogenized Al-Mg-Si alloy prevents the dissolution of Mg-Si precipitates, resulting in micrographs of higher quality. This preparation method is investigated in depth and the obtained scanning electron microscopy images are compared with transmission electron micrographs: the shape and size of Mg-Si precipitates appear very similar in either method. The scanning electron micrographs allow proper identification and measurement of the Mg-Si phases including needles with lengths of roughly 200 nm. These needles are β″ precipitates as confirmed by high resolution transmission electron microscopy. - Highlights: •Secondary precipitation in homogenized 6xxx Al alloys is crucial for extrudability. •Existing sample preparation methods for SEM are improvable. •Electropolishing with nitric acid/methanol yields superior quality in SEM. •The obtained micrographs are compared to TEM micrographs.

36 MATERIALS SCIENCE↗

Energy dependence of Kπ, pπ and Kp fluctuations in Au+Au collisions from √s NN =7.7 to 200 GeV

A search for the quantum chromodynamics (QCD) critical point was performed by the STAR experiment at the Relativistic Heavy Ion Collider, using dynamical fluctuations of unlike particle pairs. Heavy ion collisions were studied over a large range of collision energies with homogeneous acceptance and excellent particle identification, covering a significant range in the QCD phase diagram where a critical point may be located. Dynamical Kπ, pπ, and Kp fluctuations as measured by the STAR experiment in central 0–5% Au+Au collisions from center-of-mass collision energies √s NN =7.7 to 200 GeV are presented. The observable νdyn was used to quantify the magnitude of the dynamical fluctuations in event-by-event measurements of the Kπ, pπ, and Kp pairs. The energy dependences of these fluctuations from central 0–5% Au+Au collisions all demonstrate a smooth evolution with collision energy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comprehensive Characterization of Multi-Phase Sulfurized Polyacrylonitrile Cathodes for Lithium-Sulfur Batteries

Sulfurized polyacrylonitrile (SPAN) is considered one of the most promising cathode materials to overcome the operational challenges that plague lithium-sulfur (Li-S) batteries. However, material properties and electrochemical performance implications of SPAN prepared under different synthesis conditions are not yet fully investigated. In this study, we show the impacts of different synthesis conditions on the formation of sulfur to PAN bonds and redox reaction mechanisms of multi-phase SPAN via comprehensive material and electrochemical characterizations. In-situ Raman analysis was first applied to study the multi-phase SPAN-based Li-S cells. We found that both elemental sulfur and chemically bonded sulfur are present under the synthesis condition of 300 degree C/3 h along with unreacted PAN. The incompletely sulfurized, multi-phase SPAN exhibited an unusually rapid capacity degradation in the resultant Li-S cells, which is attributed to polysulfide formation and continuously growing interfacial impedance in the Li-S cells. On the other hand, SPAN samples prepared under the synthesis condition of 350 degree C/3 h are found completely sulfurized with chemically bonded sulfur to the PAN backbone without the presence of free elemental sulfur. Complete sulfurization of SPAN led to exceptionally stable cycle performance due to excellent reversible redox processes of chemically bonded sulfur with Li+ in the Li-S cells.

DIRECT ENERGY CONVERSION,ENERGY STORAGE↗

Polarimetric Radar Characteristics of Simulated and Observed Intense Convective Cores for a Midlatitude Continental and Tropical Maritime Environment

This study contrasts midlatitude continental and tropical maritime deep convective cores using polarimetric radar observables and retrievals from selected deep convection episodes during the MC3E and TWPICE field campaigns. The continental convective cores produce stronger radar reflectivities throughout the profiles, while maritime convective cores produce more positive differential reflectivity Z dr and larger specific differential phase K dp above the melting level. Hydrometeor identification retrievals revealed the presence of large fractions of rimed ice particles (snow aggregates) in the continental (maritime) convective cores, consistent with the Z dr and K dp observations. The regional cloud-resolving model simulations with bulk and size-resolved bin microphysics are conducted for the selected cases, and the simulation outputs are converted into polarimetric radar signals and retrievals identical to the observational composites. Both the bulk and the bin microphysics reproduce realistic land and ocean (L-O) contrasts in reflectivity, polarimetric variables of rain drops, and hydrometeor profiles, but there are still large uncertainties in describing Z dr and K dp of ice crystals associated with the ice particle shapes/orientation assumptions. Sensitivity experiments are conducted by swapping background aerosols between the continental and maritime environments, revealing that background aerosols play a role in shaping the distinct L-O contrasts in radar reflectivity associated with raindrop sizes, in addition to the dominant role of background thermodynamics.

54 ENVIRONMENTAL SCIENCES↗

Evaluation of ERTS-1 imagery for mapping Quaternary deposits and landforms in the Great Plains and Midwest

The author has identified the following significant results. Maps at 1:1 million scale exemplifying the first phase of the investigation (which consists of the identification and mapping of landform and land use characteristics and surficial geologic materials directly from the ERTS-1 images without use of additional data) were prepared. For areas that have not been mapped at 1:500,000 or larger scales, maps will provide the first moderately detailed information on landform features and surficial materials. Much of the information mapped is significant for exploration and development of ground (and, locally, petroleum) and for applications in engineering and environmental geology, including land use planning. Analysis of drainage patterns, stream-divide relations and land use patterns has revealed several possible moraine-controlled divices of middle and early Pleistocene age. One is an extension of the Cedar Bluffs moraine of southeastern Nebraska. Another of these divides may correspond to the terminus of Nebraska drift in the Kansas City study area. The trends of parts of various ancient filled valleys also have been identified by analysis of charges in width of the present stream valleys. The alinements of certain segments of stream valleys in Kansas and Missouri appear to be controlled by regional faults or other structural features.

Morrison, R. B.↗

Health and safety: Preliminary comparative assessment of the Satellite Power System (SPS) and other energy alternatives

Data readily available from the literature were used to make an initial comparison of the health and safety risks of a fission power system with fuel reprocessing; a combined-cycle coal power system with a low-Btu gasifier and open-cycle gas turbine; a central-station, terrestrial, solar photovoltaic power system; the satellite power system; and a first-generation fusion system. The assessment approach consists of the identification of health and safety issues in each phase of the energy cycle from raw material extraction through electrical generation, waste disposal, and system deactivation; quantitative or qualitative evaluation of impact severity; and the rating of each issue with regard to known or potential impact level and level of uncertainty.

Habegger, L. J.↗

The formation of stellar systems from interstellar molecular clouds

The observational and theoretical study of regions of continuing star formation promises greater insight into the physical conditions and events associated with the formation of the solar system, and elucidates the role played by star formation in the evolutionary cycle which seems to dominate interstellar material's processing by successive generations of stars in the spiral galaxies. Novel astronomical methods incorporated by the new facilities scheduled for development in the 1980s may yield substantial advancements in star formation process theory; most significant among these efforts will be the identification and examination of the elusive protostellar collapse phase of both star and planetary system formation.

Gehrz, R. D.↗