Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “operating costs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Rationale for structural inspections

The methods developed to predict the reliability of aircraft structures depend upon inspection effectiveness which, in turn, depends upon structural complexity, quality, and the percentage of the structure inspected. Reliability can be enhanced by choosing materials properly, designing damage-tolerant structures, and increasing inspection frequency. And, for fleet operations, costs can be minimized through proper inspection schedules, and enhanced reliability can be compatible with minimum cost. The methods are derived from a combination of probability theory and engineering equations. A discussion of these methods is presented.

Davidson, J. R.↗
NASA NTRS1976

Advanced inlet duct noise reduction concepts

A progress report is given on the implications of inlet noise reduction on aircraft direct operating costs (DOC). It considers treated inlet rings, various other inlet noise reduction concepts, and forward-speed effects. The report was limited to relatively well-established approaches to inlet noise reduction, such as acoustic liners and fixed-geometry/high-subsonic-speed inlets which are the focus of considerable current research activity. All of the concepts discussed are of a "passive" nature, i.e., no moving parts or electrical feedback systems.

Chestnutt, D.↗
NASA NTRS1976

Cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system. Volume 2: Market and economic analyses

The impact of the most promising fuel conserving options on fuel consumption, passenger demand, operating costs, and airline profits when implemented into the U.S. domestic and international airline fleets is assessed. The potential fuel savings achievable in the U.S. scheduled air transportation system over the forecast period, 1973-1990, are estimated.

Vanabkoude, J. C.↗
NASA NTRS1977

STARPAHC operational report

The results of the first one and one-half years of operation of the STARPAHC system are presented. An operational cost summary analysis is included as well as the following; (1) Medical evaluation results, (2) system usage, and (3) hardware evaluation results.

Source record↗
NASA NTRS1977

A study of commuter airplane design optimization

Problems of commuter airplane configuration design were studied to affect a minimization of direct operating costs. Factors considered were the minimization of fuselage drag, methods of wing design, and the estimated drag of an airplane submerged in a propellor slipstream; all design criteria were studied under a set of fixed performance, mission, and stability constraints. Configuration design data were assembled for application by a computerized design methodology program similar to the NASA-Ames General Aviation Synthesis Program.

Roskam, J.↗
NASA NTRS1976

Airframe technology for energy efficient transport aircraft

NASA has initiated a comprehensive Aircraft Energy Efficiency Program which is concerned with the development of approaches for reducing fuel consumption in new aircraft of the 1980-2000 time period. A review is presented of the airframe technologies selected for emphasis in the NASA program, taking into account an evaluation of their potential for reducing transport direct operating costs through fuel efficiency. Attention is given to the importance of fuel efficiency, the impact of advanced technology, advanced composite structures, the NASA composite primary structures program, advanced aerodynamics and active controls, supercritical wing geometry, active load and flutter control, and aspects of laminar flow control.

Leonard, R. W.↗
NASA NTRS1977

Aircraft operator - Would you buy higher DOC to lower noise and fuel use

A method of optimization of the direct operating cost (DOC) and the effective perceived noise (in units of EPNdB) in aircraft is proposed. A computer program was used to generate a variety of aircraft designs meeting certain specifications, where wing loading, aspect ratio, cruise altitude, wing sweepback, and speed was varied, and DOC for each case was calculated. The higher aspect ratio, in combination with the appropriate wing loadings, cruise altitudes and wing sweep, is found to reduce the noise and the fuel used.

Corning, G.↗
NASA NTRS1976

Energy and economic trade offs for advanced technology subsonic aircraft

Changes in future aircraft technology which conserve energy are studied, along with the effect of these changes on economic performance. Among the new technologies considered are laminar-flow control, composite materials with and without laminar-flow control, and advanced airfoils. Aircraft design features studied include high-aspect-ratio wings, thickness ratio, and range. Engine technology is held constant at the JT9D level. It is concluded that wing aspect ratios of future aircraft are likely to significantly increase as a result of new technology and the push of higher fuel prices. Whereas current airplanes have been designed for AR = 7, supercritical technology and much higher fuel prices will drive aspect ratio to the AR = 9-10 range. Composite materials may raise aspect ratio to about 11-12 and practical laminar flow-control systems may further increase aspect ratio to 14 or more. Advanced technology provides significant reductions in aircraft take-off gross weight, energy consumption, and direct operating cost.

Maddalon, D. V.↗
NASA NTRS1977

Advanced turboprop technology development

In order for new short-medium range transports to offer significantly lower operating costs than potential derivatives of current designs using advanced technology, the efficiency improvements of high-speed turboprop propulsion systems may be required. Recent studies indicate that the fuel savings of advanced turboprop aircraft appears to be 10 to 20 percent relative to equivalent technology turbofan aircraft. These fuel savings are certainly large enough to warrant further research to establish the viability of turboprop transport aircraft. The studies have identified the technology requirements in propeller design for high efficiency and low noise, fuselage noise attenuation, propeller and gear box maintenance, and engine-airframe integration. This paper presents a review of present research in each of these areas and describes the future plans for continued development of the technology for advanced turboprop transport aircraft.

Dugan, J. F.↗
NASA NTRS1977

Application of powered lift and mechanical flap concepts for civil short-haul transport aircraft design

The objective of this paper is to determine various design and performance parameters, including wing loading and thrust loading requirements, for powered-lift and mechanical flap conceptual aircraft constrained by field length and community noise impact. Mission block fuel and direct operating costs (DOC) were found for optimum designs. As a baseline, the design and performance parameters were determined for the aircraft using engines without noise suppression. The constraint of the 90 EPNL noise contour being less than 2.6 sq km (1.0 sq mi) in area was then imposed. The results indicate that for both aircraft concepts the design gross weight, DOC, and required mission block fuel decreased with field length. At field lengths less than 1100 m (3600 ft) the powered lift aircraft had lower DOC and block fuel than the mechanical flap aircraft but produced higher unsuppressed noise levels. The noise goal could easily be achieved with nacelle wall treatment only and thus resulted in little or no performance or weight penalty for all studied aircraft.

Conlon, J. A.↗
NASA NTRS1977

Feasibility study of modern airships. Phase 2: Executive summary

A feasibility study of modern airships has been completed. Three promising modern airship systems' concepts and their associated missions were studied; (1) a heavy-lift airship, employing a non-rigid hull and a significant amount of rotor lift, used for short-range transport and positioning of heavy military and civil payloads, (2) a VTOL (vertical take-off and landing), metalclad, partially buoyant airship used as a short-haul commercial transport; and (3) a class of fully-buoyant airships used for long-endurance Navy missions. The heavy-lift airship concept offers a substantial increase in vertical lift capability over existing systems and is projected to have lower total operating costs per ton-mile. The VTOL airship transport concept appears to be economically competitive with other VTOL aircraft concepts but can attain significantly lower noise levels. The fully-buoyant airship concept can provide an airborne platform with long endurance that satisfies many Navy mission requirements.

Source record↗
NASA NTRS1977

Report on cost/pricing relationships for the space shuttle

The operations cost for the shuttle is the basis for developing the user charge policy for the system. The policy contains several elements that are significant to the user and to NASA. It will encourage the full use of the system to the benefits of the U.S. The charge policy will encourage early transition from the expendable launch vehicles to the shuttle and this will result in lower user costs for government as well as commercial users. The relationship between the charge policy and the utilization of the shuttle is critical to the economic efficiency of the system. NASA recognizes the challenging a relationship between pricing the cost of using a reusable space system, and the need to make sure it is re-used often.

Source record↗
NASA NTRS1978

Jet aircraft hydrocarbon fuels technology

A broad specification, referee fuel was proposed for research and development. This fuel has a lower, closely specified hydrogen content and higher final boiling point and freezing point than ASTM Jet A. The workshop recommended various priority items for fuel research and development. Key items include prediction of tradeoffs among fuel refining, distribution, and aircraft operating costs; combustor liner temperature and emissions studies; and practical simulator investigations of the effect of high freezing point and low thermal stability fuels on aircraft fuel systems.

Longwell, J. P.↗
NASA NTRS1978

Effect of high lift flap systems on the conceptual design of a 1985 short-haul commercial STOL tilt rotor transport

The performances of a derivative concept of a 1985 STOL tilt rotor transport, and of a second concept having a complex mechanical flap system similar to a short field B737 aircraft were compared for a 370 kilometer (200 nautical mile) short haul mission. The flap system of the latter allowed lift to be shifted from the rotor system to the wing, permitting a 26 percent reduction in dynamic component weight, while also permitting the use of a smaller wing. The wing and disc loading of this concept were 5746 (120 psf) and 1915 (40 psf) newtons per square meter, respectively, while the wing and disc loading of the derivative concept were 4788 (100 psf) and 1197 (25 psf) newtons per square meter, respectively. The high lift wing tilt rotor showed slightly improved fuel usage over its entire operating range and about 6 to 8 percent improvement in direct operating costs, resulting from its improved cruise efficiency and reduced weight. Other advantages include improved reliability with potentially reduced maintenance and better riding quality.

Shovlin, M. D.↗
NASA NTRS1978

Preliminary study of a large span-distributed-load flying-wing cargo airplane concept

An aircraft capable of transporting containerized cargo over intercontinental distances is analyzed. The specifications for payload weight, density, and dimensions in essence configure the wing and establish unusually low values of wing loading and aspect ratio. The structural weight comprises only about 18 percent of the design maximum gross weight. Although the geometric aspect ratio is 4.53, the winglet effect of the wing-tip-mounted vertical tails, increase the effective aspect ratio to approximately 7.9. Sufficient control power to handle the large rolling moment of inertia dictates a relatively high minimum approach velocity of 315 km/hr (170 knots). The airplane has acceptable spiral, Dutch roll, and roll-damping modes. A hardened stability augmentation system is required. The most significant noise source is that of the airframe. However, for both take-off and approach, the levels are below the FAR-36 limit of 108 db. The design mission fuel efficiency is approximately 50 percent greater than that of the most advanced, currently operational, large freighter aircraft. The direct operating cost is significantly lower than that of current freighters, the advantage increasing as fuel price increases.

Jernell, L. S.↗
NASA NTRS1978

CF6 performance improvement

Potential CF6 engine performance improvements directed at reduced fuel consumption were identified and screened relative to airline acceptability and are reviewed. The screening process developed to provide evaluations of fuel savings and economic factors including return on investment and direct operating cost is described. In addition, assessments of development risk and production potential are made. Several promising concepts selected for full-scale development based on a ranking involving these factors are discussed.

Lennard, D. J.↗
NASA NTRS1978

Energy efficient engine: Preliminary design and integration studies

A mixed exhaust, direct drive fan turbofan configuration was selected from four candidates. This choice was based on its ability to exceed study goals of 12% lower thrust specific fuel consumption and 5% lower direct operating cost by the 1990's with commercially acceptable technical risk and relative mechanical simplicity. The evaluation leading to configuration selection is discussed. Necessary technology advancements are identified and related to the goals.

Gray, D. E.↗