SEARCH · Engineering Papers

Results for “numerical relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS1978

NASA aviation safety reporting system

A sample of reports relating to operations during winter weather is presented. Several reports involving problems of judgment and decisionmaking have been selected from the numerous reports representative of this area. Problems related to aeronautical charts are discussed in a number of reports. An analytic study of reports involving potential conflicts in the immediate vicinity of uncontrolled airports was performed; the results are discussed in this report. It was found that in three-fourths of 127 such conflicts, neither pilot, or only one of the pilots, was communicating position and intentions on the appropriate frequency. The importance of providing aural transfer of information, as a backup to the visual see and avoid mode of information transfer is discussed. It was also found that a large fraction of pilots involved in potential conflicts on final approach had executed straight-in approaches, rather than the recommended traffic pattern entries, prior to the conflicts. A selection of alert bulletins and responses to them by various segments of the aviation community is presented.

Source record↗

NASA NTRS1986

Statistics of voids in hierarchical universes

As one alternative to the N-point galaxy correlation function statistics, the distribution of holes or the probability that a volume of given size and shape be empty of galaxies can be considered. The probability of voids resulting from a variety of hierarchical patterns of clustering is considered, and these are compared with the results of numerical simulations and with observations. A scaling relation required by the hierarchical pattern of higher order correlation functions is seen to be obeyed in the simulations, and the numerical results show a clear difference between neutrino models and cold-particle models; voids are more likely in neutrino universes. Observational data do not yet distinguish but are close to being able to distinguish between models.

Fry, J. N.↗

NASA NTRS2012

Dipole Alignment in Rotating MHD Turbulence

We present numerical results from long-term CPU and GPU simulations of rotating, homogeneous, magnetohydrodynamic (MHD) turbulence, and discuss their connection to the spherically bounded case. We compare our numerical results with a statistical theory of geodynamo action that has evolved from the absolute equilibrium ensemble theory of ideal MHD turbulence, which is based on the ideal MHD invariants are energy, cross helicity and magnetic helicity. However, for rotating MHD turbulence, the cross helicity is no longer an exact invariant, although rms cross helicity becomes quasistationary during an ideal MHD simulation. This and the anisotropy imposed by rotation suggests an ansatz in which an effective, nonzero value of cross helicity is assigned to axisymmetric modes and zero cross helicity to non-axisymmetric modes. This hybrid statistics predicts a large-scale quasistationary magnetic field due to broken ergodicity , as well as dipole vector alignment with the rotation axis, both of which are observed numerically. We find that only a relatively small value of effective cross helicity leads to the prediction of a dipole moment vector that is closely aligned (less than 10 degrees) with the rotation axis. We also discuss the effect of initial conditions, dissipation and grid size on the numerical simulations and statistical theory.

Shebalin, John V.↗

DOE OSTI2024

Physics-Informed Learning Machines for Multiscale and Multiphysics Problems (PHILMS) (Technical Report)

The research work at University of California Santa Barbara (UCSB) resulted in several new developments in the areas of scientific machine learning, numerical analysis, and practical methods for data-driven modeling, prediction, reductions, and simulation. Many of the projects were carried out in collaboration with members of the national laboratories at Sandia National Laboratories (SNL), Pacific Northwestern National Laboratories (PNNL), and other institutions. Results included developing new scientific machine learning methods, related theory and mathematical frameworks for analysis and training, data-driven numerical solvers, and related tools and software for scientific computation. During the support period, over 16+ papers were submitted for publication, and 4 open-source software packages were developed and released (available at http://atzberger.org/). In addition, 7+ students and 2 post-docs were mentored in collaboration with the laboratory staff for future careers in academia, government labs, and industry.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1977

Application of the method of integral relations to laminar boundary layers in three dimensions

The method of integral relations is extended to general three-dimensional compressible laminar boundary layer flows. The transformation employed to transform the basic three-dimensional compressible boundary layer equations into quasi-incompressible form is an extension of the Howarth transformation. The resulting system of differential equations is integrated numerically by the method of integral relations as proposed by Dorodnitsyn. To demonstrate the accuracy of the method, it is applied to calculation of the parabolic flow over a flat plate and the boundary flow over an infinite yawed cylinder, for which solutions are known. It is then applied to the flow over a flat plate disturbed by a cylinder normal to the plate, for which a finite-difference solution is available for comparison. It is finally applied to calculating the crossflow velocity variation for supersonic flow over a swept wedge.

Holt, M.↗

NASA NTRS2011

NASA Water Resources Program

With increasing population pressure and water usage coupled with climate variability and change, water issues are being reported by numerous groups as the most critical environmental problems facing us in the 21st century. Competitive uses and the prevalence of river basins and aquifers that extend across boundaries engender political tensions between communities, stakeholders and countries. In addition to the numerous water availability issues, water quality related problems are seriously affecting human health and our environment. The potential crises and conflicts especially arise when water is competed among multiple uses. For example, urban areas, environmental and recreational uses, agriculture, and energy production compete for scarce resources, not only in the Western U.S. but throughout much of the U.S. and also in numerous parts of the world. Mitigating these conflicts and meeting water demands and needs requires using existing water resources more efficiently. The NASA Water Resources Program Element works to use NASA products and technology to address these critical water issues. The primary goal of the Water Resources is to facilitate application of NASA Earth science products as a routine use in integrated water resources management for the sustainable use of water. This also includes the extreme events of drought and floods and the adaptation to the impacts from climate change. NASA satellite and Earth system observations of water and related data provide a huge volume of valuable data in both near-real-time and extended back nearly 50 years about the Earth's land surface conditions such as precipitation, snow, soil moisture, water levels, land cover type, vegetation type, and health. NASA Water Resources Program works closely to use NASA and Earth science data with other U.S. government agencies, universities, and non-profit and private sector organizations both domestically and internationally. The NASA Water Resources Program organizes its projects under five functional themes. I) Streamflow and Flood Forecasting 2) Water Supply and Irrigation (includes evapotranspiration) 3) Drought 4) Water Quality 5) Climate and Water Resources. To maximize this activity NASA Water Resources Program works closely with other government agencies (e.g., the National Oceanic and Atmospheric Administration (NOAA); the U.S. Department of Agriculture (USDA); the U.S. Geological Survey (USGS); the Environmental Protection Agency (EPA), USAID, the Air Force Weather Agency (AFWA)), universities, non-profit national and international organizations, and the private sector. The NASA Water Resources program currently is funding 21 active projects under the functional themes (http://wmp.gsfc.nasa.gov & http://science.nasa.gov/earth-science/applied-sciences/).

Toll, David L.↗

NASA NTRS1993

Multigrid direct numerical simulation of the whole process of flow transition in 3-D boundary layers

A new technology was developed in this study which provides a successful numerical simulation of the whole process of flow transition in 3-D boundary layers, including linear growth, secondary instability, breakdown, and transition at relatively low CPU cost. Most other spatial numerical simulations require high CPU cost and blow up at the stage of flow breakdown. A fourth-order finite difference scheme on stretched and staggered grids, a fully implicit time marching technique, a semi-coarsening multigrid based on the so-called approximate line-box relaxation, and a buffer domain for the outflow boundary conditions were all used for high-order accuracy, good stability, and fast convergence. A new fine-coarse-fine grid mapping technique was developed to keep the code running after the laminar flow breaks down. The computational results are in good agreement with linear stability theory, secondary instability theory, and some experiments. The cost for a typical case with 162 x 34 x 34 grid is around 2 CRAY-YMP CPU hours for 10 T-S periods.

Liu, Chaoqun↗

NASA NTRS2025

Robust Trajectory Optimization for NRHO Rendezvous Using SPICE Kernel Relative Motion

In this paper, robust optimization is performed on trajectory correction maneuvers during the lunar lander return phase of an Artemis mission, treating the trajectory from one hour after low lunar orbit departure to arrival in the vicinity of the lunar Gateway as a relative motion problem. To enable rapid stochastic optimization techniques requiring many candidate trajectories, SPICE kernel relative motion as implemented by the Quadratic Interpolated State Transition (QIST) system is used as the underlying dynamics propagation. The optimization is performed with a genetic optimizer using linear covariance (LinCov) software in a simplified operational context, taking into account the availability of navigation sensors with varying measurement models, ranges, and accuracies. No numerical integration is used, since the relative motion around Gateway is fully characterized with the a priori computation of the QIST coefficients. Maneuver placements are computed to optimize the minimum 3σ delta-v of the trajectory, the position dispersion at a target point, and a convex combination of these two metrics. An order of magnitude runtime improvement is provided over legacy methods with less than 10% error introduced. All QIST results are shown to be in-family with legacy methods. The tradespace for optimal delta-v design is found to range from 77.0 to 93.9 m/s, while the range of optimal dispersion is between 1.4 and 11.7 km.

Relative Motion↗

DOE OSTI2021

MHD flow in liquid metal blankets: Major design issues, MHD guidelines and numerical analysis

The design of breeding blankets represents the major challenge for fusion reactor engineering because of performance requirements and severe operating conditions in terms of heat load and neutron flux. Liquid metal alloys such as lead-lithium, due to their lithium content, can be used to breed tritium, one of the plasma fuel components, and owing to their high thermal conductivity, they may serve as coolants. On the other hand, there are technical issues related to the fact that the liquid metals are electrically conducting and interact with the plasma-confining magnetic field. Induced electric currents and generated electromagnetic forces affect velocity and pressure distribution in the blankets. Magnetohydrodynamic (MHD) flows for fusion applications have been often investigated in simplified geometries, such as pipes, ducts, bends, with focus on their fundamental features. These analyses are essential, since results remain valid as background for the development of blanket designs, even when a concept is dismissed. However, the conceptual study of fusion blankets requires to take into account the global multiple effects, that arise when the full system is considered. Progress made in fusion-related MHD research results from combined numerical and experimental activities. In this paper we review and summarize features of 2D and 3D MHD flows that are typical in liquid metal blankets, together with available correlations for MHD pressure losses. This knowledge can provide simple design MHD guidelines that support a preliminary estimate of MHD effects in a blanket concept, in terms of pressure drop and flow distribution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA NTRS1980

Numerical simulation of advection fog formation on multi-disperse aerosols due to combustion-related pollutants

The effects of multi-disperse distribution of the aerosol population are presented. Single component and multi-component aerosol species on the condensation/nucleation processes which affect the reduction in visibility are described. The aerosol population with a high particle concentration provided more favorable conditions for the formation of a denser fog than the aerosol population with a greater particle size distribution when the value of the mass concentration of the aerosols was kept constant. The results were used as numerical predictions of fog formation. Two dimensional observations in horizontal and vertical coordinates, together with time-dependent measurements were needed as initial values for the following physical parameters: (1)wind profiles; (2) temperature profiles; (3) humidity profiles; (4) mass concentration of aerosol particles; (5) particle size distribution of aerosols; and (6) chemical composition of aerosols. Formation and dissipation of advection fog, thus, can be forecasted numerically by introducing initial values obtained from the observations.

Hung, R. J.↗

NASA NTRS1991

Numerical simulation of extended corona

A three-dimensional, time-dependent MHD model is presented for the study of coronal dynamics. The model, written in spherical coordinates, extends from the solar surface and was developed with two major issues in mind, namely for interpretation of various steady state and evolutionary dynamical structures in the corona. In order to achieve these objectives, two different numerical techniques are used to seek solutions for these two different, but related, problems; steady state structures and evolutionary structures. These two numerical techniques are: (1) relaxation technique for steady state structures; and (2) FICE (Full-Implicit-Continuous-Eulerian) technique for evolutionary structures. To illustrate this model, numerical results are given for examples of both the steady state and evolutionary structure of the corona which show the additional physical features which cannot be shown by a two-dimensional model.

Wu, S. T.↗

DOE OSTI2021

Energy-entropy relation for asymptotically Lifshitz spacetimes with universal horizons

We numerically solve for 2 + 1 asymptotically Lifshitz universal horizon solutions in Horava-Lifshitz gravity for dynamical exponents z = 2 through z = 16 . We find that for all z there is a thermodynamical first law. Furthermore, we find that the energy-entropy relation or Smarr formula expected for a thermal state in a two-dimensional Lifshitz field theory, E = 2 z + 2 T S , is also satisfied for universal horizons, including the correct z scaling.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2025

Finite-volume quantization condition from the N/D representation

We propose a new model-independent method for determining hadronic resonances from lattice QCD. The formalism is derived from the general principles of unitarity and analyticity, as encoded in the N/D representation of a partial-wave two-body amplitude. The associated quantization condition relates the finite-volume spectrum to the infinite-volume numerator $\mathscr{N}$, used to reconstruct the scattering amplitude from dispersive relations. Unlike the original Lüscher condition, this new formalism is valid for energies coinciding with the left-hand cuts from arbitrary one- and multiparticle exchanges.

Dawid, Sebastian M. [Univ. of Washington, Seattle,↗

NASA NTRSDate not supplied

In-Depth Analysis of Subject Functional Performance and Subjective Feedback Data for Evaluating Argos Simulation Quality

Mechanical offloading systems such as the Active Response Gravity Offload System (ARGOS) at NASA Johnson Space Center (JSC) are used to simulate various partial gravity environments. ARGOS offloads pressurized suited subjects through a gimbaling pivot point system attached to a volumetric Portable Life Support System (PLSS). The pivot point can be configured to multiple locations with respect to the human-suit system center of gravity (CG). Previous work has tested and documented the interaction between different pivot point locations and measured CG. Observations indicated that small changes in pivot point location substantially affect the stability and functional performance (simulation quality) of a subject. This led to the development of a standardized gimbal assessment protocol to assess the functional performance of a pressurized suited subject as a function of the pivot point location, using the data obtained from a variety of planetary suit mobility tasks. As a result, an expansive repository of CG-related task metrics was generated from numerous ARGOS spacesuit test events, for different gimbal configurations and different test subjects. Based on the evaluation metrics and observed trends, several pivot point locations were iteratively identified to determine an “appropriate/optimal” configuration. This study thus describes the in-depth analysis of the CG evaluation metrics to better quantify trends and determine if specific factors are strongly associated with appropriate/optimal configurations. Quantitative and qualitative variables relating to subject task performance, subjective feedback, and anthropometry will be evaluated via probabilistic methods. The results from this study are expected to improve our understanding of optimal ARGOS gimbal settings, which will better inform the gimbal configuration identification process and improve simulation quality for extravehicular activity (EVA) training.

Joseph Yao↗

NASA NTRS1992

Recent advances in numerical simulation and control of asymmetric flows around slender bodies

The problems of asymmetric flow around slender bodies and its control are formulated using the unsteady, compressible, thin-layer or full Navier-Stokes equations which are solved using an implicit, flux-difference splitting, finite-volume scheme. The problem is numerically simulated for both locally-conical and three-dimensional flows. The numerical applications include studies of the effects of relative incidence, Mach number and Reynolds number on the flow asymmetry. For the control of flow asymmetry, the numerical simulation cover passive and active control methods. For the passive control, the effectiveness of vertical fins placed in the leeward plane of geometric symmetry and side strakes with different orientations is studied. For the active control, the effectiveness of normal and tangential flow injection and surface heating and a combination of these methods is studied.

Kandil, Osama A.↗

NASA NTRS1999

High Order Approximations for Compressible Fluid Dynamics on Unstructured and Cartesian Meshes

The development of high-order accurate numerical discretization techniques for irregular domains and meshes is often cited as one of the remaining challenges facing the field of computational fluid dynamics. In structural mechanics, the advantages of high-order finite element approximation are widely recognized. This is especially true when high-order element approximation is combined with element refinement (h-p refinement). In computational fluid dynamics, high-order discretization methods are infrequently used in the computation of compressible fluid flow. The hyperbolic nature of the governing equations and the presence of solution discontinuities makes high-order accuracy difficult to achieve. Consequently, second-order accurate methods are still predominately used in industrial applications even though evidence suggests that high-order methods may offer a way to significantly improve the resolution and accuracy for these calculations. To address this important topic, a special course was jointly organized by the Applied Vehicle Technology Panel of NATO's Research and Technology Organization (RTO), the von Karman Institute for Fluid Dynamics, and the Numerical Aerospace Simulation Division at the NASA Ames Research Center. The NATO RTO sponsored course entitled "Higher Order Discretization Methods in Computational Fluid Dynamics" was held September 14-18, 1998 at the von Karman Institute for Fluid Dynamics in Belgium and September 21-25, 1998 at the NASA Ames Research Center in the United States. During this special course, lecturers from Europe and the United States gave a series of comprehensive lectures on advanced topics related to the high-order numerical discretization of partial differential equations with primary emphasis given to computational fluid dynamics (CFD). Additional consideration was given to topics in computational physics such as the high-order discretization of the Hamilton-Jacobi, Helmholtz, and elasticity equations. This volume consists of five articles prepared by the special course lecturers. These articles should be of particular relevance to those readers with an interest in numerical discretization techniques which generalize to very high-order accuracy. The articles of Professors Abgrall and Shu consider the mathematical formulation of high-order accurate finite volume schemes utilizing essentially non-oscillatory (ENO) and weighted essentially non-oscillatory (WENO) reconstruction together with upwind flux evaluation. These formulations are particularly effective in computing numerical solutions of conservation laws containing solution discontinuities. Careful attention is given by the authors to implementational issues and techniques for improving the overall efficiency of these methods. The article of Professor Cockburn discusses the discontinuous Galerkin finite element method. This method naturally extends to high-order accuracy and has an interpretation as a finite volume method. Cockburn addresses two important issues associated with the discontinuous Galerkin method: controlling spurious extrema near solution discontinuities via "limiting" and the extension to second order advective-diffusive equations (joint work with Shu). The articles of Dr. Henderson and Professor Schwab consider the mathematical formulation and implementation of the h-p finite element methods using hierarchical basis functions and adaptive mesh refinement. These methods are particularly useful in computing high-order accurate solutions containing perturbative layers and corner singularities. Additional flexibility is obtained using a mortar FEM technique whereby nonconforming elements are interfaced together. Numerous examples are given by Henderson applying the h-p FEM method to the simulation of turbulence and turbulence transition.

Barth, Timothy↗

NASA NTRS1984

Relative motion characteristics of 2 near-Earth Satellites

The stability of the nonlinear dynamical system of two GRAVSAT - type satellites was investigated by performing several numerical experiments which provide the simulations of the relative motion characteristics between the two satellites for various specified time intervals. The simulations included the relative range, range-rate, and relative acceleration magnitude. These simulations were generated with respect to appropriate initial orbital elements which were obtained such that the instantaneous separation distance between the two satellites has small fluctuations from a specified constant separation distance. The simulation results indicate that the behavior of the relative motions is very sensitive to the initial orbital elements of the satellites and that for a specified time interval of interest. A stable behavior is possible only with the use of an appropriate set of initial orbital elements compatible with the gravity field used to derive them.

Schutz, B. E.↗

DOE OSTI2020

A buoyancy–shear–drag-based turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz mixing

A phenomenological turbulence model for Rayleigh–Taylor, reshocked Richtmyer–Meshkov, and Kelvin–Helmholtz instability-induced mixing is developed using a general buoyancy–shear–drag model. Analytic solutions to the simplified model equations corresponding to each instability are derived separately, which are then used to calibrate the model coefficients to predict specific values of the mixing layer growth parameters and exponents. The buoyancy-shear–drag equations for the bubble and spike mixing layer widths are then solved numerically, and a turbulent diffusivity (or viscosity) is constructed dimensionally as the product of the mixing layer width, h, and its time-derivative, dh/dt. Surrogate turbulent fields are then constructed by multiplying a presumed, approximate self-similar spatial profile by appropriate functions of h and dh/dt. Using several simplifying approximations, the turbulent diffusion equations satisfied by the mean mass fraction and mean shear velocity are solved analytically in a reference frame moving with the mean advection velocity, and it is shown that the mean fields evolve in space and time as expected. The explicit modeling and solution of turbulent transport equations (e.g., for the turbulent kinetic energy and its dissipation rate or a lengthscale) are not required. By using separate equations for the bubble and spike evolution, the model naturally captures the asymmetry induced by an increasing density contrast between the heavy and light fluids. The model also includes molecular dissipation and diffusion, and therefore, can describe transition to fully-developed turbulence if the initial turbulent diffusivity/viscosity is much smaller than the molecular diffusivity/viscosity. This model is applied to constant-acceleration Rayleigh–Taylor, impulsively reshocked Richtmyer–Meshkov, and variable-density Kelvin–Helmholtz mixing layers to demonstrate its utility. It is shown that the numerical solutions of the model calibrated using specific values of the instability growth parameters and exponents: (1) produces mixing layer widths in agreement with the expected self-similar growth power laws; (2) gives spatiotemporal profiles of turbulent fields that are expected and consistent with previous results; (3) predicts the expected power-law growths and decays of the spatially-integrated turbulent fields, and; (4) gives spatiotemporal profiles of the mean fields that are expected and consistent with previous results. This relatively simple model can be implemented numerically, and is expected to be useful for fundamental as well as astrophysical and inertial confinement fusion applications.

42 ENGINEERING↗