Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “moon”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Meteoritic material on the moon

Three types of meteoritic material are found on the moon: micrometeorites, ancient planetesimal debris from the "early intense bombardment," and debris of recent, craterforming projectiles. Their amounts and compositions have been determined from trace element studies. The micrometeorite component is uniformly distributed over the entire lunar surface, but is seen most clearly in mare soils. It has a primitive, C1-chondrite-like composition, and comprises 1 to 1.5 percent of mature soils. Apparently it represents cometary debris. The ancient component is seen in highland breccias and soils. Six varieties have been recognized, differing in their proportions of refractories (Ir, Re), volatiles (Ge, Sb), and Au. All have a fractionated composition, with volatiles depleted relative to siderophiles. The abundance patterns do not match those of the known meteorite classes. These ancient meteoritic components seem to represent the debris of an extinct population of bodies (planetisimals, moonlets) that produced the mare basins during the first 700 Myr of the moon's history. On the basis of their stratigraphy and geographic distribution, five of the six groups are tentatively assigned to specific mare basins: Imbrium, Serenitatis, Crisium, Nectaris, and Humorum or Nubium.

Morgan, J. W.↗

Moon-Mercury - Relative preservation states of secondary craters

Geologic studies including mapping of the Kuiper quadrangle of Mercury suggest that secondary craters are much better preserved than those on the moon. Factors which may account for the apparent differences between lunar and Mercurian secondary crater morphology include: (1) the rapid isostatic adjustment of the parent crater, (2) different impact fluxes of the two planets, (3) the greater concentration of Mercurian secondaries around impact areas, and (4) differences in crater ejection velocities. It has been shown that the ejection velocities on Mercury are about 50% greater than those on the moon at equivalent ranges. This may account for morphologically enhanced secondary craters, and may explain their better preservation with time.

Scott, D. H.↗

Tidal stresses in the moon

The tidal stresses in a radially heterogeneous moon are calculated numerically as a function of time and location by using the latest moon model obtained from seismic data. Theoretical results are compared with the observed features of deep moonquakes and in particular with those of the most active A sub 1 hypocenter. The results show that (1) the magnitudes of tidal stresses are small, of the order of 1 bar and less, (2) they reach maxima in the seismically active depth range of 600-1200 km, (3) the geographic distribution of moonquake epicenters does not appear to be controlled solely by the highest tidal stresses, and the presence of heterogeneities and weak zones may be important in determining moonquake locations, (4) the occurrence times of moonquakes correlate with one or more of the tidal stress components, and (5) the presence of an ambient tectonic stress of about the same order of magnitude as the tidal stress is necessary to explain the observed reversal in polarity of the A sub 1 moonquakes.

Cheng, C. H.↗

Imbrian-age highland volcanism on the moon - The Gruithuisen and Mairan domes

The Gruithuisen and Mairan domes on the moon represent morphologically and spectrally distinct nonmare extrusive volcanic features of Imbrian age. The composition, morphology, and age relationships of the domes indicate that nonmare extrusive volcanism in the northern Procellarum region of the moon continued until about 3.3 x 10 to the 9th to 3.6 x 10 to the 9th years ago and was partially contemporaneous with the emplacement of the main sequence of mare deposits.

Head, J. W., III↗

The moon in Heiligenschein

An analysis of 25 photometric digital images of the moon has been carried out to obtain a single image in a new mapping parameter, the Heiligenschein exponent. The data necessarily represent a range of lunar phases, but all are within 10 hours of full moon. The new parameter characterizes the rate at which lunar features brighten as their local phase angles approach zero. Although considerable contrast is present in this parameter, there is only a small corelation with normal albedo. In particular, the large albedo difference between maria and highlands is not simply reflected in Heiligenschein differences, which are larger within each category of terrain than the difference between the Heiligenschein averages of each. A correlation with age may be present in both the maria and the highlands, but its determination will require separation into distinct geochemical provinces.

Wildey, R. L.↗

Impact flows and crater scaling on the moon

The axisymmetric distribution of stress, internal energy, and particle velocity resulting from the impact of an iron meteoroid with a gabbroic anorthosite lunar crust has been calculated for the regime in which shock-induced melting and vaporization take place. Comparison of impact flow fields, with phase changes in silicates taken into account, with earlier results demonstrate that in the phase-change case where the 15-km/s projectile has penetrated some two projectile radii into the moon, the peak stress in the flow is about 0.66 Mbar at a depth of 66 km, and the stress has decayed to about 66 kbar at a depth of 47 km. Rapid attenuation occurs because of the high rarefaction velocity of the high-pressure phases associated with a 35% (zero-pressure) density increase. This feature of the phase-change flow tends to concentrate strongly the maximum shock pressures along the meteoroid trajectory (axis) and makes the conical zone along which high internal energy deposition occurs both shallow and narrow. Examination of the gravitational energies required to excavate larger craters on the moon indicates the importance of gravity forces acting during the excavation of craters having radii in the range greater than about 2 to 140 km.

Okeefe, J. D.↗

Lunar Science Conference, 8th, Houston, Tex., March 14-18, 1977, Proceedings. Volume 1 - The moon and the inner solar system. Volume 2 - Petrogenetic studies of mare and highland rocks. Volume 3 - Planetary and lunar surfaces

Solar system processes are considered along with the origin and evolution of the moon, planetary geophysics, lunar basins and crustal layering, lunar magnetism, the lunar surface as a planetary probe, remote observations of lunar and planetary surfaces, earth-based measurements, integrated studies, physical properties of lunar materials, and asteroids, meteorites, and the early solar system. Attention is also given to studies of mare basalts, the kinetics of basalt crystallization, topical studies of mare basalts, highland rocks, experimental studies of highland rocks, geochemical studies of highland rocks, studies of materials of KREEP composition, a consortium study of lunar breccia 73215, topical studies on highland rocks, Venus, and regional studies of the moon. Studies of surface processes, are reported, taking into account cratering mechanics and fresh crater morphology, crater statistics and surface dating, effects of exposure and gardening, and the chemistry of surfaces.

Merril, R. B.↗

Numerical calculations of the cross-section for the accretional capture of the moon by the earth

If a primary body is increasing in mass the hyperbolic orbit of a secondary body can become an elliptic orbit. In order to determine the cross-section for the accretional capture of the moon by the earth, a series of numerical calculations has been carried out. Calculations have been carried out for various orbital ellipticities and separations and for various accretion rates. Accretional capture is favored if significant accretion occurs in a period of less than 100 yr. A window for accretional capture occurs if the minimum initial separation of the earth and moon (in astronomical units) is nearly equal to the initial heliocentric lunar eccentricity.

Nordmann, J. C.↗

Soil maturity and planetary regoliths - The Moon, Mercury, and the asteroids

Observations of the Moon, Mercury and the asteroids provide data which can be used to assess current ideas about the optical maturation of regoliths of bodies without atmospheres. Telescopic data show Mercury's surface to be as optically mature as the Moon's while the asteroids appear to have 'fresh' surfaces. We suggest that these cases illustrate two different paths of regolith evolution caused by differing micrometeoroid impact velocities, gravity, and in some cases composition.

Matson, D. L.↗

Probable distribution of large impact basins on Venus - Comparison with Mercury and the moon

The reported study is based on the 12.5 cm wavelength data of Rumsey et al. (1974). The considered low resolution (80 km) radar image covers an area equivalent to 19% of the surface of Venus. The study had the objective to map potential large impact structures and relate their size frequency distribution to those of Mercury and the moon. The Venus radar map was analyzed using a color television film density slicer system for enhancement of subtle changes and gross patterns of contrasting radar reflectivity. Analysis by this technique permitted the recognition of 12 possible basins with diameters exceeding 600 km on about 8% of the total surface area of the planet. The preliminary basin size frequency distribution determined for Venus from these low resolution data suggests that the cloud-covered planet could be more cratered per unit area by basins than either the moon or Mercury.

Schaber, G. G.↗

The moon - Composition determined by nebular processes

The Ganapathy-Anders seven-component model is used as the basis for an analysis of conditions in the early solar nebula as they pertain to the formation of the moon. Calculations incorporating improved geological data and petrological constraints are presented in terms of a model moon which meets trace element restrictions and conforms to known parameters of heat flow, density, and moment of inertia ratio, ie., 40 ppb U, and a core of 2% by weight. It is noted that a melt of the model composition approximates that of Apollo 15 green glass, together with a residuum of olivine, plus 3-4% spinel.

Morgan, J. W.↗

The state of meteoritic material on the moon

Velocity distributions obtained from earth-based meteor observations and corrected to constant meteoroid mass are transformed to meteoroid impact velocity distributions at the moon. Average velocities at the moon thus obtained range from 13 to 18 km/sec. This information is then combined with impact heating estimates to determine the amounts of resident lunar material and incoming meteoritic material that is melted or vaporized. It is found that about 5% of the resulting melt and about 25% of the impact generated vapor should be of meteoritic content. The uncertainties in these estimates are rather large, however, because of uncertainties in the various experimental results required to establish the parameters used in this analysis. The impact generated melts and impact generated vapor deposits, if the latter can be found, should provide additional means for chemically separating out the meteoritic component in the lunar soil.

Zook, H. A.↗

Natural lunar seismic events and the structure of the moon

The gross structure of the moon may be determined from natural seismic events, supplemented by artificial impacts at close ranges. The moon has a rigid mantle below a layered crust. At a depth of 500-850 km there is a decrease in S-velocity and an increase in attenuation; the preferred depth for this change is 600 km. The simultaneous occurrence of these phenomena indicates a small amount of melt below this depth. Deep focus moonquakes lie below the decrease in S-velocity at depths of about 650-950 km. Good estimates of the depth of shallow focus moonquakes are not available, but they may be releasing tectonic stress.

Dainty, A. M.↗

Implications of atmospheric Ar-40 escape on the interior structure of the moon

Radiogenic Ar-40 escapes from the lunar atmosphere at a rate of about 2 x 10 to the 21st atoms/sec. This amounts to 8% of the rate of argon production in the entire moon by potassium decay. A curious feature of the argon escape rate is a variability with time scale of several months. It is shown that the variation in argon loss correlates with high-frequency lunar teleseismic events. The only apparent region of the moon which could possibly supply the amount of argon needed for escape via a plausible temporal mechanism is a semimolten asthenosphere which may be entirely primitive unfractionated lunar material, or an Fe-FeS core that is enriched in potassium. A core that is devoid of potassium is not compatible with the atmospheric argon measurements.

Hodges, R. R., Jr.↗

The dynamical evolution and origin of the Martian moons

The orbital evolution of Phobos and Deimos is considered from the standpoints of today's orbit, the semimajor axis, and eccentricity and inclination. The synchronous rotations of the moons are discussed, and attention is given to the origin (i.e., accretion and capture) of the moons.

Burns, J. A.↗

What's new on the moon?

As a result of the Apollo program and other lunar probes, questions that remained unsolved during centuries of speculation and scientific study can now be answered concerning the composition, core, surface, age, and history of the moon. Data obtained from lunar samples and instruments on the lunar surface are being used to gain insight into the history of the earth and the other planets, planetary evolution, the development of planetary magnetic fields, the nature of the solar wind, and how the Sun operates. Projects suggested for using the moon to increase understanding of geophysics are described.

Source record↗

Floor-fractured craters on the moon and Mars

Impact craters on the moon provided primary pathways for volcanic eruptions through shock-induced fractures that immediately or subsequently tap magma reservoirs. Evidence for this process includes unbreached lava-filled craters and fractured crater floors with associated eruptives. Over 200 craters with floor fractures have been identified on the moon. They commonly occur along the margins of irregular maria, thereby suggesting a link to this important phase of lunar volcanism. Topographic data reveal small elevation differences between the summit of the remnant central peaks and crater rim, and in many cases suggest that floor fracturing resulted from a tabular intrusion localized beneath the crater with uplift of the crater floor. A comparison of lunar and Martian crater photographs shows that some Martian craters also exhibit similar highly localized endogenic modifications.

Schultz, P. H.↗

Saturn: Origin and composition of its inner moons and rings

The contraction of the primitive protosaturnian cloud, using ideas of supersonic turbulent convection was modeled. The model suggested that each of Saturn's inner moons, excepting Rhea, condensed above the ice-point of water and consists primarily of hydrous magnesium silicates. The satellite mean densities steadily increase towards the planet and the rocky moons are irregular in shape.

Prentice, A. J. R.↗