Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “molecular geometry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Velocity-Map Imaging and Magnetic-Bottle Photoelectron Spectroscopy of [SeCCH] – : Electronic Properties and Spin–Orbit Splitting

In this work, the recently synthesized acetylide compound KSeCCH containing the main group element selenium within the novel and in crystalline form unprecedented [SeCCH] – anion was successfully investigated in the gas phase by high-resolution velocity-map imaging (VMI) and magnetic-bottle (MB) photoelectron spectroscopy coupled with an electrospray ionization source. Both VMI and MB spectra exhibited identical electron affinities (EA, 2.517 ± 0.002 eV), spin–orbit coupling (SOC) splittings (1492 ± 20 cm –1 ), and Se–C stretching frequencies (573 ± 20 cm –1 ) of the corresponding neutral tetra-atomic radical [SeCCH] • with the VMI spectrum possessing six times higher spectral resolution compared with the MB spectrum. These experimental values were well reproduced by calculations at the CCSD(T) level, in which both the isolated [SeCCH] – anion and the [SeCCH] • radical adopted linear geometries. The simulated spectra based on the calculated Franck–Condon factors, the SOC splitting, and the experimental line width matched well with the measured spectra. Furthermore, comparisons of the EA and SOC splitting values with the previously reported isolobal species [SeCN] • are also made and discussed. The decrease in the EA and SOC splitting of [SeCCH] • is ascribed to the differences in the electronegativities between C and N atoms as well as the electron density on the Se atom in its singly occupied molecular orbital (SOMO).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exploring the Structural Behavior of Hydrophilic Diglycolamide Complexes with the Lanthanides and Actinides

In the ongoing effort to meet the anticipated rise in energy demand while maintaining the full-scale abandonment of natural gas and coal, a substantial shift in our considerations of green energy is required through the wider adoption of nuclear power. However, the advantages of nuclear power are hindered by the challenges of safely managing nuclear waste. Hydrophilic diglycolamides (DGA) ligands have been explored for use as stripping agents in various lanthanide and actinide partitioning processes. Additionally, the separation of lanthanide fission products and transplutonic actinides can serve multifaceted advantages in that the separation neutron poisoning rare earth element (REE) fission products from minor actinides from used nuclear fuel (UNF) can be mutually beneficial to the fundamental research behind REE separations and UNF separations. With this in mind, understanding the bonding differences between the Ln3+ and An3+ ions as a function of DGA structure, such as varying the alkyl groups on each of the amide functional groups, has an influence on the molecule’s selectivity and solubility and whose changes in molecular architecture also impact the radiolytic behavior of these molecules. As such, crystal structures of (Y3+, La-Lu3+, excl. Pm, Pu3+/4+, Am3+, Bk3+, and Cf3+) with hydrophilic diglycolamides show the systematic progression, and changes in coordination habits, as a function of a f-element ions. These coordination complexes see a consistent decrease in bond lengths and changes in the coordination environment while traversing across the f-elements, owing to the effects of the lanthanide contraction as well as local geometry around the metal centers. Direct comparisons of lanthanide with actinide DGA structures display both striking similarities in coordination with earlier actinides of Pu and Am, while later actinides of Bk and Cf display a complete breakdown of these observed trends. This work has also presented the rare opportunity to study homoleptic DGA compounds across multiple oxidation states have provided insight into their nuanced differences in structural chemistry.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2020

Performance Limits of an Alternating Current Electroluminescent Device

Abstract The use of an alternating current (AC) voltage is a simple, versatile method of producing electroluminescence from generic emissive materials without the need for contact engineering. Recently, it was shown that AC‐driven, capacitive electroluminescent devices with carbon nanotube network contacts can be used to generate and study electroluminescence from a variety of molecular materials emitting in the infrared‐to‐ultraviolet range. Here, performance trade‐offs in these devices are studied through comprehensive device simulations and illustrative experiments, enhancing understanding of the mechanism and capability of electroluminescent devices based on alternating as opposed to direct current (DC) schemes. AC‐driven electroluminescent devices can overcome several limitations of conventional DC‐driven electroluminescent devices, including the requirement for proper alignment of material energy levels and the need to process emitting materials into uniform thin films. By simultaneously optimizing device geometry, driving parameters, and material characteristics, the performance of these devices can be tuned. Importantly, the turn‐on voltage of AC‐driven electroluminescent devices approaches the bandgap of the emitting material as the gate oxide thickness is scaled, and internally efficient electroluminescence can be achieved using low‐mobility single‐layer emitter films with varying thicknesses and energy barrier heights relative to the contact.

Wang, Vivian↗
DOE OSTI2020

Materials Data on UH14(SeO5)2 by Materials Project

(UH3(SeO5)2)2(H2)11 crystallizes in the monoclinic P2_1/c space group. The structure is two-dimensional and consists of sixteen hydrogen molecules; four molecular hydrogen molecules; and one UH3(SeO5)2 sheet oriented in the (1, 0, 0) direction. In the UH3(SeO5)2 sheet, U4+ is bonded to seven O2- atoms to form distorted UO7 pentagonal bipyramids that share corners with three equivalent SeO4 tetrahedra and corners with two equivalent SeO4 trigonal pyramids. There are a spread of U–O bond distances ranging from 1.80–2.49 Å. There are three inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.00 Å. In the second H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 1.01 Å. In the third H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. There are two inequivalent Se1+ sites. In the first Se1+ site, Se1+ is bonded to four O2- atoms to form SeO4 tetrahedra that share corners with three equivalent UO7 pentagonal bipyramids. There are a spread of Se–O bond distances ranging from 1.65–1.76 Å. In the second Se1+ site, Se1+ is bonded to four O2- atoms to form distorted SeO4 trigonal pyramids that share corners with two equivalent UO7 pentagonal bipyramids. There are a spread of Se–O bond distances ranging from 1.69–1.97 Å. There are ten inequivalent O2- sites. In the first O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one U4+ and one Se1+ atom. In the second O2- site, O2- is bonded in a distorted single-bond geometry to one H1+ and one Se1+ atom. In the third O2- site, O2- is bonded in a water-like geometry to one H1+ and one Se1+ atom. In the fourth O2- site, O2- is bonded in a 2-coordinate geometry to one U4+ and one Se1+ atom. In the fifth O2- site, O2- is bonded in a bent 150 degrees geometry to one U4+ and one Se1+ atom. In the sixth O2- site, O2- is bonded in a single-bond geometry to one U4+ atom. In the seventh O2- site, O2- is bonded in a distorted water-like geometry to one H1+ and one Se1+ atom. In the eighth O2- site, O2- is bonded in a distorted bent 120 degrees geometry to one U4+ and one Se1+ atom. In the ninth O2- site, O2- is bonded in a distorted bent 150 degrees geometry to one U4+ and one Se1+ atom. In the tenth O2- site, O2- is bonded in a distorted single-bond geometry to one U4+ atom.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Active and Transfer Learning of High-Dimensional Neural Network Potentials for Transition Metals

Classical molecular dynamics (MD) simulations represent a very popular and powerful tool for materials modeling and design. The predictive power of MD hinges on the ability of the interatomic potential to capture the underlying physics and chemistry. There have been decades of seminal work on developing interatomic potentials, albeit with a focus predominantly on capturing the properties of bulk materials. Such physics-based models, while extensively deployed for predicting the dynamics and properties of nanoscale systems over the past two decades, tend to perform poorly in predicting nanoscale potential energy surfaces (PESs) when compared to high-fidelity first-principles calculations. These limitations stem from the lack of flexibility in such models, which rely on a predefined functional form. Machine learning (ML) models and approaches have emerged as a viable alternative to capture the diverse size-dependent cluster geometries, nanoscale dynamics, and the complex nanoscale PESs, without sacrificing the bulk properties. Here, in this study, we introduce an ML workflow that combines transfer and active learning strategies to develop high-dimensional neural networks (NNs) for capturing the cluster and bulk properties for several different transition metals with applications in catalysis, microelectronics, and energy storage, to name a few. Our NN first learns the bulk PES from the high-quality physics-based models in literature and subsequently augments this learning via retraining with a higher-fidelity first-principles training data set to concurrently capture both the nanoscale and bulk PES. Our workflow departs from status-quo in its ability to learn from a sparsely sampled data set that nonetheless covers a diverse range of cluster configurations from near-equilibrium to highly nonequilibrium as well as learning strategies that iteratively improve the fingerprinting depending on model fidelity. All the developed models are rigorously tested against an extensive first-principles data set of energies and forces of cluster configurations as well as several properties of bulk configurations for 10 different transition metals. Our approach is material agnostic and provides a methodology to transfer and build upon the learnings from decades of seminal work in molecular simulations on to a new generation of ML-trained potentials to accelerate materials discovery and design.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantum Hamiltonian for the surface charge density on a ring torus and radiative decay of plasmons

Photon scattering and the ensuing excitation of surface plasmons in single rings, single composite rings, and many-ring systems was recently shown to provide dispersion and field distributions [K. V. Garapati et al., J. Phys. Commun. 2, 015031 (2018)] of potential for specific applications in particle and molecular trapping [R. Alaee et al., Appl. Phys. Lett. 109, 141102 (2016); M. Salhi et al., Phys. Rev. A 92, 033416 (2015)], in addition to metamaterials and sensing. Furthermore, following photon or electron interactions with metallic nanorings, both radiative and nonradiative decay channels are important in the consideration of the nanoparticle as a photon or phonon source, and in related applications. In this work, we quantize the electronic normal modes of the ring torus and obtain the radiative decay of plasmons. Due to a geometry-related complexity, we employ a perturbation approach to obtain analytical expressions for the radiative decay channel for a vacuum bounded single solid nanoring. In quantizing the fields, the frequency spectrum of the charge density normal modes of the nanoring is obtained and shown to agree with the exact quasistatic plasmon dispersion relations. Higher-order corrections beyond the presented zero- and first-order calculations may be obtained following the presented results. The results are of potential interest in quantum sensing such as entangling photons and plasmons, or plasmons and trapped molecules.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Single Entity Electrochemistry in Nanopore Electrode Arrays: Ion Transport Meets Electron Transfer in Confined Geometries

Electrochemical measurements conducted in confined volumes provide a powerful and direct means to address scientific questions at the nexus of nanoscience, biotechnology, and chemical analysis. How are electron transfer and ion transport coupled in confined volumes and how does understanding them require moving beyond macroscopic theories? Also, how do these coupled processes impact electrochemical detection and processing? We address these questions by studying a special type of confined-volume architecture, the nanopore electrode array, or NEA, which is designed to be commensurate in size with physical scaling lengths, such as the Debye length, a concordance that offers performance characteristics not available in larger scale structures. The experiments described here depend critically on carefully constructed nanoscale architectures that can usefully control molecular transport and electrochemical reactivity. We begin by considering the experimental constraints that guide the design and fabrication of zero-dimensional nanopore arrays with multiple embedded electrodes. These zero-dimensional structures are nearly ideal for exploring how permselectivity and unscreened ion migration can be combined to amplify signals and improve selectivity by enabling highly efficient redox cycling. Our studies also highlight the benefits of arrays, in that molecules escaping from a single nanopore are efficiently captured by neighboring pores and returned to the population of active redox species being measured, benefits that arise from coupling ion accumulation and migration. These tools for manipulating redox species are well-positioned to explore single molecule and single particle electron transfer events through spectroelectrochemistry, studies which are enabled by the electrochemical zero-mode waveguide (ZMW), a special hybrid nanophotonic/nanoelectronic architecture in which the lower ring electrode of an NEA nanopore functions both as a working electrode to initiate electron transfer reactions and as the optical cladding layer of a ZMW. Furthermore, while the work described here is largely exploratory and fundamental, we believe that the development of NEAs will enable important applications that emerge directly from the unique coupled transport and electron-transfer capabilities of NEAs, including in situ molecular separation and detection with external stimuli, redox-based electrochemical rectification in individually encapsulated nanopores, and coupled sorters and analyzers for nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Cocrystals combining order and correlated disorder via colloidal crystal engineering with DNA

Colloidal cocrystallization enables the formation of multicomponent materials with unique physicochemical properties, yet the role of nanoparticle (NP) shape and specific ligand interactions to cocrystallize anisotropic and isotropic NPs, with order and correlated disorder, remains underexplored. Here, geometry-inspired strategies along with programmable DNA interactions are combined to achieve structural control of colloidal cocrystal assemblies. Coassembling polyhedral and spherical NPs with complementary DNA yields two classes of cocrystals: one where both components order, and another where polyhedral NPs form a periodic lattice, while spherical NPs remain disordered but spatially correlated with polyhedral edges and corners. The size ratio of the building blocks can be used to control the ordering of spherical NPs—smaller octahedral-to-sphere size ratios favor fully ordered cocrystals. Molecular dynamics simulations further elucidate the role of NP shapes and dimensions in the structural outcome of the cocrystal. This work provides a framework for deliberately targeting and accessing crystals with exotic multicomponent structures.

Li, Yuanwei [Northwestern Univ., Evanston, IL (Uni↗
DOE OSTI2021

Exploring new small system geometries in heavy ion collisions [Slides]

We explore various new collision geometries in the context of the publicly available hydrodynamic model SONIC. We incorporate full A-nucleon configurations for 4 He, 12 C, and 16 O obtained from quantum Monte Carlo calculations with realistic nuclear potentials, and use a Monte Carlo Glauber calculation for the initial conditions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Verification and Validation Activities for the Multi-Fidelity Toolkit

The Multi-Fidelity Toolkit (MFTK) is a simulation tool being developed at Sandia National Laboratories for aerodynamic predictions of compressible flows over a range of physics fidelities and computational speeds. These models include the Reynolds-Averaged-Navier-Stokes (RANS) equations, the Euler equations, and modified Newtonian aerodynamics (MNA) equations, and they can be invoked independently or coupled with hierarchical Kriging to interpolate between high-fidelity simulations using lower-fidelity data. However, as with any new simulation capability, verification and validation are necessary to gather credibility evidence. This work describes formal code- and solution-verification activities as well as model validation with uncertainty considerations. Code verification is performed on the MNA model by comparing with an analytical solution for flat-plate and inclined-plate geometries. Solution-verification activities include grid-refinement studies of HIFiRE-1 wind tunnel measurements, which are used for validation, for all model fidelities. A thorough treatment of the validation comparison with prediction error and validation uncertainty is also presented.

42 ENGINEERING↗
DOE OSTI2024

Novel Full-Ceramic Multi-Tubular Membrane Systems for Pre-Combustion CO2 Capture with Simultaneous H2 Production: Fabrication, Performance Testing, and 3D CFD Modeling

Inorganic membranes show promise for application in pre-combustion CO2 capture with simultaneous H2 production. State-of-the-art systems for use under high temperature and pressure conditions consist of multiple membrane tube bundles prepared in a "candle-filter" configuration, in which the membrane tubes are open at one end and sealed at the other. This configuration is used for practical reasons, specifically the need to minimize potential problems due to thermal expansion mismatch, at high temperatures, between the ceramic tube bundle and the steel housing. The primary technical problem with the candle-filter configuration for use in commercial-scale installations is the inability to purge the permeate side (typically the tube side), a feature that is crucial for high H2 recovery. In this study, we fabricated dual-end open, commercial-size ceramic multiple-tube bundles made of zeolite, palladium (Pd), and carbon molecular sieve (CMS) membranes that enable permeate-side (tube-side) purge for gas separation applications. Experimental gas separation data with these membrane bundles under harsh operating conditions (temperatures up to 350 and pressures up to 800 psig), to be presented at the meeting, manifest excellent performance. Parallel to the membrane bundle construction and testing efforts, we have also developed a detailed 3D CFD modeling package using COMSOL Multiphysics software to gain more insight into the effect on the H2 purity and recovery of the detailed geometry of the multi-tubular membrane system, including the number of tubes used, their dimensions, and placement in the bundle, as well as the number, type, and positioning of internal baffles and other flow-enhancement accessories. The CFD package is validated with experimental data from different systems (1-tube, 3-tube, and 19-tube bundles), and shows high accuracy in predicting the experimental results (<5 % error in all cases). The results of our study show that the detailed internal geometry of these multi-tubular membrane systems has a considerable impact on the performance of the system as the flow maldistribution within the shell-side can substantially decrease (>40%) the H2 recovery.

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1987

Plasma interactions in the Space Shuttle Orbiter environment

Attempts to measure the ambient ionospheric plasma environment in the vicinity of the payload bay of the Space Shuttle Orbiter have shown that the plasma is quite different, in a variety of characteristics, from the ionospheric plasma at low earth orbit altitudes. It appears that the large size, complex geometry and various outgassing characteristics of a typical Orbiter payload can all contribute to modifications of the plasma environment of the Space Shuttle Orbiter. The measurements indicate that the plasma is often quite turbulent and contains populations more energetic than the ambient ionospheric plasma. Pronounced wake and ram effects have been observed, and at times the data can be interpreted as plasma number density enhancements of an order of magnitude or greater over the ambient, undisturbed plasma concentration. There is evidence that this enhanced plasma concentration contains molecular ions, not occurring naturally at low earth orbit altitudes. In addition to describing the observations, the electrodynamics of enhanced Orbiter-generated plasma and its possible impact on optical measurements from the Space Shuttle Orbiter will be discussed.

Raitt, W. J.↗
NASA NTRS2006

Computational Spectroscopy of Polycyclic Aromatic Hydrocarbons In Support of Laboratory Astrophysics

Polycyclic aromatic hydrocarbons (PAHs) are strong candidates for the molecular carriers of the unidentified infrared bands (UIR) and the diffuse interstellar bands (DIBs). In order to test the PAH hypothesis, we have systematically measured the vibronic spectra of a number of jet-cooled neutral and ionized PAHs in the near ultraviolet (UV) to visible spectral ranges using the cavity ring-down spectroscopy. To support this experimental effort, we have carried out theoretical studies of the spectra obtained in our measurements. Ab initio and (time-dependent) density.functiona1 theory calculations are performed to obtain the geometries, energetics, vibrational frequencies, transition dipole moments, and normal coordinates of these PAH molecules. Franck-Condon (FC) calculations and/or vibronic calculations are then performed using the calculated normal coordinates and vibrational frequencies to simulate the vibronic spectra. It is found that vibronic interactions in these conjugated pi electron systems are often strong enough to cause significant deviations from the Born-Oppenheimer (BO) approximation. For vibronic transitions that are well described by the BO approximation, the vibronic band profiles are simulated by calculating the rotational structure of the vibronic transitions. Vibronic oscillator strength factors are calculated in the frame of the FC approximation from the electronic transition dipole moments and the FC factors. This computational effort together with our experimental measurements provides, for the first time, powerful tools for comparison with space-based data and, hence, a powerful approach to understand the spectroscopy of interstellar PAH analogs and the nature of the UIR and DIBs.

Tan, Xiaofeng↗
DOE OSTI2026

pH-Driven Restructuring of Hydration Layers and Cation Ad-sorption at the Alumina-Water Interface

Oxide-water interfaces underpin ion separation, catalysis, and electrochemical energy technologies, where the electrical double layer (EDL) controls adsorption, transport, and reactivity. Yet, the molecular-scale link between pH-dependent surface protonation, hydration-layer structure, and counter-ion adsorption remains poorly defined. Here, we combine in situ crystal truncation rod (CTR) and resonant anomalous X-ray reflectivity (RAXR) with streaming potential measurements and ab initio molecular dynamics (AIMD) simulations to resolve the chemical and structural evolution of the EDL at the single-crystal alumina (012)-water interface in 10 mM Rb+ over pH 3-12. CTR measurements reveal two distinct adsorbed water layers at ~2.2 and ~3.5 Å above the surface that each shift toward the substrate at transition pHs near 6.5 and 10.6, respectively, directly reflecting changes in primary hydration layer structure in response to the deprotonation of bridging and terminal aluminol groups. RAXR shows a 10-fold increase in Rb+ coverage and a decrease in mean adsorption height from ~3.5 to ~2.7 Å with increasing pH, indicating enhanced counter-ion binding accompanied by Stern layer contraction. Streaming potential measurements demonstrate that the zeta potential, i.e., potential at the hydrodynamic shear plane, is positive at pH 3 and becomes negative at pH ≥3.5. This negative charge magnitude increases with increasing pH, consistent with progressive surface deprotonation at higher pH. AIMD identifies inner- and outer-sphere Rb+ complexes whose adsorption heights and coordination geometries depend sensitively on the protonation state of surface oxygens, providing atomistic support for the experimentally inferred trends. These measurements establish two discrete, site-specific pH transitions in hydration-layer structure that track aluminol (de)protonation and quantitatively link them to a pH-driven contraction of the Stern layer (increasing Rb+ coverage and decreasing adsorption height). This provides a direct structural basis for connecting surface acid-base chemistry to ion binding distances at an oxide-water interface.

Electrical double layer (EDL), Surface protonation↗
NASA NTRS1992

Polarization of the far-infrared emission from the thermal filaments of the Galactic center arc

The polarization of the 100 micron continuum emission has been measured at 14 positions in the dense, warm molecular cloud associated with the arched filaments, or the 'bridge', of the radio arc near the Galactic center. At all positions the percent polarization is found to be quite large, ranging up to 6.5 percent. The polarization is interpreted in terms of thermal emission by magnetically aligned dust grains. The directions of the polarization vectors then indicate that the magnetic field is (1) parallel to the long dimension of the thermal radio filaments, and (2) very uniform on scales of 1-10 pc. Of several explanations for the inferred field geometry, the simplest is that it results from the unusually large dynamical shear in the emitting cloud.

Morris, M.↗
DOE OSTI2021

Nickel(ii) complexes based on dithiolate–polyamine binary ligand systems: crystal structures, hirshfeld surface analysis, theoretical study, and catalytic activity study on photocatalytic hydrogen generation

To ascertain the influence of binary ligand systems [1,1-dicyanoethylene-2,2-dithiolate (i-mnt -2 ) and polyamine {tetraen = tris(2-aminoethyl)amine, tren = diethylene triamine and opda = o-phenylenediamine}] on the coordination modes of the Ni(II) metal center and resulting supramolecular architectures, a series of nickel(II) thiolate complexes [Ni(tetraen)(i-mnt)](DMSO) (1), [Ni 2 (tren) 2 (i-mnt) 2 ] (2), and [Ni 2 (i-mnt) 2 (opda) 2 ] n (3) have been synthesized in high yield in one step in water and structurally characterized by single crystal X-ray crystallography and spectroscopic techniques. X-ray diffraction studies disclose the diverse i-mnt -2 coordination to the Ni +2 center in the presence of active polyamine ligands, forming a slightly distorted octahedral geometry (NiN 4 S 2 ) in 1, square planar (NiS 4 ) and distorted octahedral geometries (NiN 6 ) in the bimetallic co-crystallized aggregate of cationic [Ni(tren) 2 ] +2 and anionic [Ni(i-mnt) 2 ] -2 in 2, and a one dimensional (1D) polymeric chain along the [100] axis in 3, having consecutive square planar (NiS 4 ) and octahedral (NiN 6 ) coordination kernels. The N–H···O, N–H···S, N–H···N, N–H···S, N–H···N, and N–H···O type hydrogen bonds stabilize the supramolecular assemblies in 1, 2, and 3 respectively imparting interesting graph-set-motifs. The molecular Hirshfeld surface analyses (HS) and 2D fingerprint plots were utilized for decoding all types of non-covalent contacts in the crystal networks. Atomic HS analysis of the Ni +2 centers reveals significant Ni–N metal–ligand interactions compared to Ni–S interactions. We have also studied the unorthodox interactions observed in the solid state structures of 1–3 by QTAIM and NBO analyses. Moreover, all the complexes proved to be highly active water reduction co-catalysts (WRC) in a photo-catalytic hydrogen evolution process involving iridium photosensitizers, wherein 2 and 3 having a square planar arrangement around the nickel center(s) – were found to be the most active ones, achieving 1000 and 1119 turnover numbers (TON), respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Atomic‐Scale Mechanisms of Nucleation and Stabilization in CuCrO 2 and CuFeO 2 Delafossite Thin Films on Al 2 O 3

Abstract Delafossite thin films exhibit a range of intriguing physical properties derived from their layered structure, which consists of alternating noble metal ( A + ) and ( B O 2 − ) sublayers in an AB O 2 stoichiometry. The integration of these properties into functional devices requires the successful epitaxial growth of delafossites as thin films on appropriate substrates. Unfortunately, their unique lattice geometry complicates growth, as different delafossites display variable behavior on the same substrate, often unrelated to lattice mismatch. This suggests the presence of yet unidentified stabilization mechanisms that enable the selective growth of certain delafossites, allowing them to be grown either as films themselves or to be used as buffer layers for subsequent deposition. In this study, advanced scanning transmission electron microscopy (STEM) is employed to investigate the nucleation mechanisms governing the stable growth of Cu‐based delafossites on Al 2 O 3 , specifically CuCrO 2 and CuFeO 2 thin films synthesized via molecular‐beam epitaxy. These findings reveal that a combination of a misfit dislocation network at the interface and monolayer‐deep chemical intermixing effectively relieves lattice mismatch strain. This mechanism, which differs fundamentally from that observed in Pd‐based delafossites, provides key insights into the controlled epitaxy of delafossite materials.

Scheid, Anna [Max Planck Institute for Solid State↗
DOE OSTI2024

ZrH2 as measured on ARCS for NXS2021

This data is for ZrH2 in an Al can it is measured at room temperature. This data was used for the Neutron and Xray scattering school in 2021. It was measured on the ARCS direct geometry spectrometer at the spallation neutron source. The .nxs files are event files that can be read and processed with Mantid. The nxspe files are auto reduced files that can be read with Mantid, Dave, or Mslice. Both types of files are hdf5 and can be read with any tool that reads hdf5.

MATERIALS SCIENCE↗