SEARCH · Engineering Papers

Results for “moisture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS1973

Opportunities for space surveys of moisture anomalies

Review of a combination of infrared scanning, unsupervised spectroscopic classification, change detection, and perturbation spectroscopy for monitoring anomalous moisture exchange from space. Infrared sensors have been developed which can monitor the solar reflectance from droplet distributions in vegetation and clouds, the absorption of thermal radiation by water vapor, and the microwave attenuation by atmospheric water. Unsupervised spectroscopic classification techniques are emerging which have the potential to subdivide strip maps from infrared scanners into different moisture targets. Intersecting and parallel spacecraft orbits provide opportunities to study the change of recognized targets between two scans and to recognize anomalous moisture exchange from those changes which significantly exceed the statistical uncertainty of the spectroscopic target signature. The new concept of perturbation spectroscopy shows a potential to quantitatively determine the change of integrated water vapor pressure with a minimum of 'atmospheric truth' and with low spectroscopic resolution that is typical of simple interference filters.

Krause, F. R.↗

NASA NTRS1974

Remote sensing of soil moisture by Skylab radiometer and scatterometer sensors

A Skylab experiment was designed to evaluate the feasibility of monitoring the moisture content of the soil from space. Data from various Skylab sensors were collected across two test sites while direct measurements of soil moisture were being made at the surface depths of soil. Correlations were obtained between the moisture content of the soil and radiometer sensors (S193 and S194) and the scatterometer instrument (S193). The high correlations obtained indicate that microwave sensors may be quite useful for such measurements in the future.-

Eagleman, J. R.↗

NASA NTRS1973

Radar measurement of soil moisture content

The effect of soil moisture on the radar backscattering coefficient was investigated by measuring the 4-8 GHz spectral response from two types of bare-soil fields: slightly rough and very rough, in terms of the wavelength. An FM-CW radar system was used to measure the return at 10 frequency points across the 4-8 GHz band, at different look angles, and for all polarization combinations. The results indicate that the radar response to soil moisture content is highly dependent on the surface roughness, microwave frequency, and look angle. The response seems to be linear over the range 15%-30% moisture content for all angles, frequencies, polarizations and surface conditions.

Ulaby, F. T.↗

NASA NTRS1975

Effects of roughness on the radar response to soil moisture of bare ground

The radar response to soil moisture content was experimentally determined for three different bare fields with considerably different surface roughnesses at eight frequencies in the 2 to 8 GHz band and for Horizontal transmit-Horizontal receive (HH) and Vertical transmit-Vertical receive (VV) polarizations. Analysis of the data indicated that the effect of roughness on the radar backscattering coefficient can be minimized by proper choice of the radar parameters. If, in addition, sensitivity to soil moisture variations and system design constraints are considered, the following radar parameters for an operational soil moisture mapper are recommended: frequency= 4 GHz, angle of incidence range= 7 deg to 15 deg and either HH or VV polarization. The corresponding sensitivity is about 0.25 db/ 0.01 gram/cubic cm.

Batlivala, P. P.↗

NASA NTRS1975

Electrical methods of determining soil moisture content

The electrical permittivity of soils is a useful indicator of soil moisture content. Two methods of determining the permittivity profile in soils are examined. A method due to Becher is found to be inapplicable to this situation. A method of Slichter, however, appears to be feasible. The results of Slichter's method are extended to the proposal of an instrument design that could measure available soil moisture profile (percent available soil moisture as a function of depth) from a surface measurement to an expected resolution of 10 to 20 cm.

Silva, L. F.↗

NASA NTRS1975

Satellite microwave observations of soil moisture variations

The electrically scanning microwave radiometer (ESMR) on the Nimbus 5 satellite was used to observe microwave emissions from vegetated and soil surfaces over an Illinois-Indiana study area, the Mississippi Valley, and the Great Salt Lake Desert in Utah. Analysis of microwave brightness temperatures (T sub B) and antecedent rainfall over these areas provided a way to monitor variations of near-surface soil moisture. Because vegetation absorbs microwave emission from the soil at the 1.55 cm wavelength of ESMR, relative soil moisture measurements can only be obtained over bare or sparsely vegetated soil. In general T sub B increased during rainfree periods as evaporation of water and drying of the surface soil occurs, and drops in T sub B are experienced after significant rainfall events wet the soil. Microwave observations from space are limited to coarse resolutions (10-25 km), but it may be possible in regions with sparse vegetation cover to estimate soil moisture conditions on a watershed or agricultural district basis, particularly since daily observations can be obtained.

Schmugge, T. J.↗

NASA NTRS1975

Detection of soil moisture and snow characteristics from Skylab

The author has identified the following significant results. The most significant result is the good response of the passive radiometers, particularly the L-band radiometer, to changing soil moisture conditions near the surface of the earth. Radiometer response was very good for the five complete data sets consisting of three passes across Texas and two passes across Kansas. When data from the five different passes were combined, the correlation between the S194 radiometric temperature and soil moisture content remained high with a value of -0.96. The performance of the S193 passive radiometer was less consistent; however, one data set gave a very high correlation of -0.95. The scatterometer response to soil moisture at incidence angles near 30 deg was not as good as for the radiometers.

Eagleman, J. R.↗

NASA NTRS1976

Results of soil moisture flights during April 1974

The results presented here are derived from measurements made during the April 5 and 6, 1974 flights of the NASA P-3A aircraft over the Phoenix, Arizona agricultural test site. The purpose of the mission was to study the use of microwave techniques for the remote sensing of soil moisture. These results include infrared (10-to 12 micrometers) 2.8-cm and 21-cm brightness temperatures for approximately 90 bare fields. These brightness temperatures are compared with surface measurements of the soil moisture made at the time of the overflights. These data indicate that the combination of the sum and difference of the vertically and the horizontally polarized brightness temperatures yield information on both the soil moisture and surface roughness conditions.

Schmugge, T. J.↗

NASA NTRS1976

Soil-moisture ground truth, Hand County, South Dakota

Soil types were determined from the Soil Survey of Hand County, South Dakota. The soil types encountered on the soil moisture lines are summarized. The actual soil moisture data are presented. The data have been divided by range, township and section. The soil moisture data obtained in fields of winter wheat and spring wheat are briefly summarized.

Jones, E. B.↗

NASA NTRS1976

Mesoscale temperature and moisture fields from satellite infrared soundings

The combined use of radiosonde and satellite infrared soundings can provide mesoscale temperature and moisture fields at the time of satellite coverage. Radiance data from the vertical temperature profile radiometer on NOAA polar-orbiting satellites can be used along with a radiosonde sounding as an initial guess in an iterative retrieval algorithm. The mesoscale temperature and moisture fields at local 9 - 10 a.m., which are produced by retrieving temperature profiles at each scan spot for the BTPR (every 70 km), can be used for analysis or as a forecasting tool for subsequent weather events during the day. The advantage of better horizontal resolution of satellite soundings can be coupled with the radiosonde temperature and moisture profile both as a best initial guess profile and as a means of eliminating problems due to the limited vertical resolution of satellite soundings.

Hillger, D. W.↗

NASA NTRS1975

Remote sensing of soil moisture by Skylab radiometer and scatterometer sensors

Eagleman, J. R.↗

NASA NTRS1976

Moisture transport in composites

The moisture distribution and moisture content of composite materials exposed to humid air or to water are discussed. Expressions are presented for estimating the weight gain of both single and multilayered composites when the moisture content and the temperature of the environment are constant. The parameters needed for solving problems in the time varying environmental conditions are specified, and a numerical approach for the solution of such problems is indicated.

Springer, G. S.↗

NASA NTRS1977

Soil moisture sensing with aircraft observations of the diurnal range of surface temperature

Aircraft observations of the surface temperature were made by measurements of the thermal emission in the 8-14 micrometers band over agricultural fields around Phoenix, Arizona. The diurnal range of these surface temperature measurements were well correlated with the ground measurement of soil moisture in the 0-2 cm layer. The surface temperature observations for vegetated fields were found to be within 1 or 2 C of the ambient air temperature indicating no moisture stress. These results indicate that for clear atmospheric conditions remotely sensed surface temperatures are a reliable indicator of soil moisture conditions and crop status.

Schmugge, T. J.↗

NASA NTRS1977

Analytical study of effects of surface and environmental thermal properties on moisture in composites

The influence of surface and environmental thermal properties on the moisture absorption in fiber-reinforced polymeric-resin-matrix composite materials which have been subjected to convection and solar radiation was studied. Predicted moisture contents based on the conditions at the heated surface and in the ambient air were compared for both short term and long term exposures over a wide range of values for emittance, solar absorptance, convective heat transfer coefficient, solar radiation, ambient temperature, and orientation of the surface with respect to the sun. The calculations showed that absorptance and heat transfer coefficient have significant effects on the moisture content.

Tompkins, S. S.↗

NASA NTRS1977

Deriving mesoscale temperature and moisture fields from satellite radiance measurements over the United States

The ability to provide mesoscale temperature and moisture fields from operational satellite infrared sounding radiances over the United States is explored. High-resolution sounding information for mesoscale analysis and forecasting is shown to be obtainable in mostly clear areas. An iterative retrieval algorithm applied to NOAA-VTPR radiances uses a mean radiosonde sounding as a best initial-guess profile. Temperature soundings are then retrieved at a horizontal resolution of about 70 km, as is an indication of the precipitable water content of the vertical sounding columns. Derived temperature values may be biased in general by the initial-guess sounding or in certain areas by the cloud correction technique, but the resulting relative temperature changes across the field when not contaminated by clouds will be useful for mesoscale forecasting and models. The derived moisture, affected only by high clouds, proves to be reliable to within 0.5 cm of precipitable water and contains valuable horizontal information. Present-day applications from polar-orbiting satellites as well as possibilities from upcoming temperature and moisture sounders on geostationary satellites are noted.

Hillger, D. W.↗

NASA NTRS1977

Estimation of soil moisture with radar remote sensing

The radar response to soil moisture content was investigated using a truck-mounted 1-18 GHz (30-1.67 cm wavelength, respectively) active microwave spectrometer (MAS) system. The sensitivity to soil moisture content and the accuracy with which it could be estimated were evaluated for both bare and vegetation-covered fields. Bare field experiments were conducted to determine the optimum radar parameters (frequency, angle of incidence range, and polarization configuration) for minimizing the response to surface roughness while retaining strong sensitivity to moisture content. In the vegetation-covered case, the effects of crop type, crop height and row direction relative to the radar look direct were evaluated.

Batlivala, P. P.↗

NASA NTRS1978

Effects of moisture in infrared thermography of resin matrix composites

Several multiply graphite polyimide composite specimens were examined by real-time infrared thermography in order to study the effects of moisture on their thermograms. Heat was injected from one side and IR emission detected on the opposite side using AGA Thermovision System-680. No differences between the thermograms of dry and water containing specimens were detected for defect-free specimens. However, the presence of trapped water in defective specimens modified the thermographic contrast significantly. It is concluded that: (1) IR thermography can be used to detect moisture in defective composites, and (2) because of the possibility of moisture camouflaging defects, IR thermography for subsurface defect detection should be supplemented by other techniques - such as acoustical imaging and X-radiography.

Singh, J. J.↗

NASA NTRS1977

The role of hybrid construction techniques on sealed moisture levels

Residual gas analysis techniques were employed to measure the moisture in sealed hybrid packages as a function of substrate attach material, vacuum bake time and sequence, and sealing procedure. It is shown that when room atmospheric exposure is eliminated following the vacuum bakeout moisture levels of less than 1000 ppm may be achieved for modest bake times and solder substrate attach techniques. Suitable moisture levels were achieved for epoxy attached substrates only when seam sealing procedures were employed.

Somerville, D. T.↗